scholarly journals Quality Enhancement Mechanism of Alkali-Free Chinese Northern Steamed Bread by Sourdough Acidification

Molecules ◽  
2020 ◽  
Vol 25 (3) ◽  
pp. 726 ◽  
Author(s):  
Bowen Yan ◽  
Huayu Yang ◽  
Yejun Wu ◽  
Huizhang Lian ◽  
Hao Zhang ◽  
...  
Keyword(s):  
Ph Value ◽  
Sodium Dodecyl ◽  
Critical Factor ◽  
Textural Properties ◽  
Sem Analysis ◽  
Dough Rheology ◽  
Novel Approach ◽  
Steamed Bread ◽  
Decreasing Ph ◽  
Alkali Addition

Alkali was used to adjust the pH and neutralize the excess acids of dough in the processing of Chinese northern steamed bread (CNSB). However, extra alkali addition generally resulted in alkalic flavor and poor appearance. The aim of this work was to investigate the role of proofed dough pH on the texture of CNSB. Correlation analysis demonstrated that the pH value of proofed dough has a significant effect on the textural properties of CNSB. The mechanism studies found that gradual acidification of dough by lactic acid bacteria is a critical factor affecting the process. Conversely, chemical acidification weakened the texture property of products and reduced the dough rheology. Scanning electron microscope (SEM) analysis showed that fermentation with starter for 12 h produced a continuous and extensional protein network in the proofed dough. Furthermore, the decreasing pH of proofed dough increased the extractability of protein in a sodium dodecyl sulfate (SDS)-containing medium and the content of free sulfhydryl (SH). The structure and content of gluten, especially influenced by gradual acidification level, change the quality of the final product. It is a novel approach to obtain an alkali-free CNSB with excellent quality by moderate gluten adjustment.

Oxidation of hydrogen peroxide at the dropping mercury electrode

1984 ◽  
Vol 49 (10) ◽  
pp. 2320-2331 ◽  
Author(s):  
Miroslav Březina ◽  
Martin Wedell
Keyword(s):  
Hydrogen Peroxide ◽  
Superoxide Anion ◽  
Ph Value ◽  
Mercury Electrode ◽  
Electrode Process ◽  
Electrochemical Processes ◽  
Dropping Mercury Electrode ◽  
Oxidation Of Hydrogen ◽  
Decreasing Ph ◽  
Rate Controlling Step

Reduction of oxygen and oxidation of hydrogen peroxide at the dropping mercury electrode are electrochemical processes strongly influenced both by the pH value and the anions in solution. With decreasing pH, both processes become irreversible, especially in the presence of anions with a negative φ2 potential of the diffusion part of the double layer. In the case of irreversible oxygen reduction, the concept that the rate-controlling step of the electrode process is the acceptance of the first electron with the formation of the superoxide anion, O2-, was substantiated. Oxidation of hydrogen peroxide becomes irreversible at a lower pH value than the reduction of oxygen. The slowest, i.e. rate-controlling step of the electrode process in borate buffers at pH 9-10 is the transfer of the second electron, i.e. oxidation of superoxide to oxygen.

scholarly journals Regression Analysis of Orthogonal, Cylindrical and Multivariable Color Parameters for Colorimetric Surface pH Measurement of Materials

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3682
Author(s):  
Katarína Vizárová ◽  
Izabela Vajová ◽  
Naďa Krivoňáková ◽  
Radko Tiňo ◽  
Zdenko Takáč ◽  
...  
Keyword(s):  
Ph Value ◽  
Critical Factor ◽  
Ph Measurement ◽  
Ph Indicator ◽  
Water Quality Control ◽  
Quality Management Systems ◽  
Surface Ph ◽  
Regression Parameters ◽  
Ph Detection

The surface pH is a critical factor in the quality and longevity of materials and products. Traditional fast colorimetric pH detection-based tests such as water quality control or pregnancy tests, when results are determined by the naked eye, cannot provide quantitative values. Using standard pH papers, paper-printed comparison charts, or colorimetric microfluidic paper-based analytical devices is not suitable for such technological applications and quality management systems (QMSs) where the particular tested material should contain a suitable indicator in situ, in its structure, either before or after the process, the technology or the apparatus that are being tested. This paper describes a method based on the combination of impregnation of a tested material with a pH indicator in situ, its exposure to a process of technology whose impact on pH value is to be tested, colorimetric pH measurement, and approximation of pH value using derived pH characteristic parameters (pH-CPs) based on CIE orthogonal and cylindrical color variables. The hypotheses were experimentally verified using the methyl red pH indicator, impregnating the acid lignin-containing paper, and preparing a calibration sample set with pH in the range 4 to 12 using controlled alkalization. Based on the performed measurements and statistical evaluation, it can be concluded that the best pH-CPs with the highest regression parameters for pH are √∆E, ln (a),√∆H (ab), a/L, h/b and ln (b/a). The experimental results show that the presented method allows a good estimation of pH detection of the material surfaces.

scholarly journals Study on microcrystalline cellulose/chitosan blend foam gel material

2020 ◽  
Vol 27 (1) ◽  
pp. 424-432
Author(s):  
Hongkai Zhao ◽  
Kehan Zhang ◽  
Shoupeng Rui ◽  
Peipei Zhao
Keyword(s):  
Microcrystalline Cellulose ◽  
Raw Materials ◽  
Pore Space ◽  
Sodium Dodecyl ◽  
Cost Effective ◽  
High Water ◽  
Aldehyde Group ◽  
Sem Analysis ◽  
Present Contribution ◽  
Bet Analysis

AbstractIn the present contribution, an environmental-friendly and cost-effective adsorbent was reported for soil treatment and desertification control. A novel foam gel material was synthesized here by the physical foaming in the absence of catalyst. By adopting modified microcrystalline cellulose and chitosan as raw materials and sodium dodecyl sulfonate (SDS) as foaming agent, a microcrystalline cellulose/chitosan blend foam gel was synthesized. It is expected to replace polymers derived from petroleum for agricultural applications. In addition, a systematical study was conducted on the adsorbability, water holding capacity and re-expansion performance of foam gel in deionized water and brine under different SDS concentrations (2%–5%) as well as adsorption time. To be specific, the adsorption capacity of foam gel was up to 105g/g in distilled water and 54g/g in brine, indicating a high water absorption performance. As revealed from the results of Fourier transform infrared spectroscopy (FTIR) analysis, both the amino group of chitosan and the aldehyde group modified by cellulose were involved. According to the results of Scanning electron microscope (SEM) analysis, the foam gel was found to exhibit an interconnected pore network with uniform pore space. As suggested by Bet analysis, the macroporous structure was formed in the sample, and the pore size ranged from 0 to 170nm. The mentioned findings demonstrated that the foam gel material of this study refers to a potential environmental absorbent to improve soil and desert environments. It can act as a powerful alternative to conventional petroleum derived polymers.

scholarly journals A Novel Approach to Fabricate Foam Ceramics from Steel Slag

2020 ◽  
Vol 2020 ◽  
pp. 1-7
Author(s):  
Yu Zheng ◽  
Xudong Luo ◽  
Jinlong Yang ◽  
Wenlong Huo ◽  
Chi Kang
Keyword(s):  
Compressive Strength ◽  
Ph Value ◽  
Steel Slag ◽  
Raw Material ◽  
Solid Loading ◽  
Insulation Material ◽  
Ceramic Foams ◽  
Novel Approach ◽  
The Stability ◽  
First Time

A novel approach is used for fabricating steel slag foam ceramics based on the particle-stabilized foaming method. In this work, steel slag was used as the raw material and propyl gallate (PG) was used as the surface modifier. For the first time, steel slag ceramic foams were successfully fabricated based on particle-stabilized foams. The results show that the stability of the ceramic foams was closely related to the pH value and PG concentration. The porosity and compressive strength could be controlled by changing the solid loading of steel slag and sintering temperature. The porosity of steel slag foam ceramics ranged from 85.6% to 62.53%, and the compressive strength was from 1.74 MPa to 10.42 MPa. The thermal conductivity of steel slag foam ceramics was only 0.067 W (m·K)−1, which shows that it could be used as a thermal insulation material.

scholarly journals The Removal of Methylene Blue Dye from Aqueous Solutions Using Activated and Non-Activated Bentonites

2003 ◽  
Vol 21 (5) ◽  
pp. 451-462 ◽  
Author(s):  
Sameer Al-Asheh ◽  
Fawzi Banat ◽  
Leena Abu-Aitah
Keyword(s):  
Methylene Blue ◽  
Ph Value ◽  
Sodium Dodecyl ◽  
Freundlich Isotherm ◽  
Blue Dye ◽  
Batch Adsorption ◽  
Ionic Surfactant ◽  
Methylene Blue Dye ◽  
X Ray Diffraction ◽  
Initial Ph

An improvement in the adsorption capacity of naturally available bentonite towards water pollutants such as Methylene Blue dye (MBD) is certainly needed. For this purpose, sodium bentonite was activated by two methods: (1) treatment with sodium dodecyl sulphate (SDS) as an ionic surfactant and (2) thermal treatment in an oven operated at 850°C. Batch adsorption tests were carried out on removing MBD from aqueous solution using the above-mentioned bentonites. It was found that the effectiveness of bentonites towards MBD removal was in the following order: thermal-bentonite > SDS-bentonite > natural bentonite. X-Ray diffraction analysis showed that an increase in the microscopic bentonite platelets on treatment with SDS was the reason behind the higher uptake of MBD. An increase in sorbent concentration or initial pH value of the solutions resulted in a greater removal of MBD from the solution. An increase in temperature led to an increase in MBD uptake by the bentonites studied in this work. The Freundlich isotherm model was employed and found to represent the experimental data well.

A New Approach to Fluorescent Chemosensor of Cu2+ Ion

2014 ◽  
Vol 513-517 ◽  
pp. 65-69
Author(s):  
Xiao Jun Hu ◽  
Xin Yan Hu ◽  
Zhi Zhang
Keyword(s):  
Aqueous Solution ◽  
Electron Transfer ◽  
Self Assembly ◽  
Ph Value ◽  
Sodium Dodecyl ◽  
Fluorescence Emission ◽  
Fluorescent Chemosensor ◽  
Dynamic Quenching ◽  
Transfer Effects ◽  
New Approach

According to the principle of dynamic quenching a new ON-OFF fluorescent chemosensor for Cu2+ions was designed, this chemosensor was composed of p-tert-butylthiacalix [arene (TCA),sodium dodecyl sulfate (SDS) and perylene through the form of self-assembly in aqueous solution. Addition of Cu2+ions could result in a quenching of the fluorescence emission of perylene inside micelles, which due to intramicellar complex-fluorophore electron-transfer or energy-transfer effects induced by the complexation of TCA with the Cu2+ions.The experimental results indicated that: Under the condition of TCA/perylene was 800/1, SDS concentration was 150mmol/L and pH value above 9, according to the fluorescence quenching ,within a certain range of the concentration of Cu2+ion can be linearly determined.

scholarly journals Sonochemically synthetized ZnO-Graphene nanohybrids and its characterization

2020 ◽  
Vol 59 (1) ◽  
pp. 176-187 ◽  
Author(s):  
Cornel Cobianu ◽  
Niculae Dumbravescu ◽  
Bogdan-Catalin Serban ◽  
Octavian Buiu ◽  
Cosmin Romanitan ◽  
...  
Keyword(s):  
Thermal Treatment ◽  
Ph Value ◽  
Raman Band ◽  
Xrd Analysis ◽  
Sem Analysis ◽  
Carbon Incorporation ◽  
Additional Amount ◽  
Ph Increase ◽  
Compositional Properties ◽  
Crystalline Symmetry

AbstractThe paper presents the morphological, structural and compositional properties of the sonochemically prepared ZnO-1.4wt% Graphene (Z-G) nanocomposites as a function of pH value of suspension varying from 8.5 to 14 and thermal annealing at 450°C in nitrogen or air ambient. The SEM analysis of the Z-G hybrids dried at 150°C in air has shown a nano-flower like nanostructure for a pH value of 14. The XRD analysis of dried Z-G hybrids revealed a crystallite size increase from 3.5 nm to 18.4 nm with pH increase, and this result was explained in terms of colloids zeta potential evolution with pH value. The Raman and EDS spectroscopy have shown a split of the G band (1575 cm−1) of graphene into two bands (1575 cm−1 and 1605 cm−1), an increased height of D (1323 cm−1) band, and an additional amount of carbon due to CO2 absorption from the air, respectively. The carbon incorporation increased with the decrease of pH, and was associated with a hydrozincite phase, Zn5(CO3)2(OH)6. The formation of dried Z-G nanocomposite was clearly demonstrated only at a pH value equal to 14, where two ZnO Raman active bands at 314.9 cm−1 and 428.2 cm−1 appeared. This result may indicate the sensitivity of the Raman spectroscopy to the nanoflower-like nanostructure of dried Z-G hybrids prepared at pH=14. The thermal treatment of Z-G hybrids in N2at 450°C has increased the number of ZnO Raman bands as a function of pH value, it has decreased the amount of additional carbon by conversion of hydrozincite to ZnO and preserved the graphene profile. The thermal treatment in air at 450°C has increased the crystalline symmetry and stoichiometry of the ZnO as revealed by high and narrow Raman band from 99 cm−1 specific to Zn optical phonons, but it has severely affected the graphene profile in the Z-G hybrid, due to combustion of graphene in oxygen from the ambient.

Ultrasonic SHM Approach to Predict Delamination in a Laminated Beam Using d15 Piezoelectric Sensors

2021 ◽  
pp. 1-32
Author(s):  
Hussain Altammar ◽  
Nathan Salowitz
Keyword(s):  
Lead Zirconate Titanate ◽  
Critical Factor ◽  
Lead Zirconate ◽  
Wave Mode ◽  
Ultrasonic Waves ◽  
Propagation Path ◽  
Shear Mode ◽  
Novel Approach ◽  
Viable Approach ◽  
Laminated Structures

Abstract Ultrasonic structural health monitoring (SHM), employing embedded piezoelectric elements to actuate and sense ultrasonic waves, has greatly advanced in recent years. This paper presents a novel approach to address the prevailing challenges in the inspection of laminated structures for delamination using shear-mode (d15) piezoelectric transducers, composed of lead zirconate titanate (PZT). To experimentally evaluate the effectiveness of the proposed approach, a beam-like laminated specimen consisting of internally embedded d15 square PZTs was fabricated with simulated delamination at the interface of an adhesive joint. Evaluation of the results showed that the location of shear-mode actuators is a critical factor to detect delamination and to predict the propagation path of delamination. Delamination initiated close to actuators are more likely to be detected owing to their remarkable sensitivity of structural stiffness surrounding their region. The antisymmetric A0 wave mode generated by these actuators exhibit high interaction with damage, suggesting internally embedded d15 PZTs are a viable approach that can potentially advance the inspection tools of ultrasonic SHM.

Characterization of Indonesia Decellularized Liver Cubes Scaffold using Scanning Electron Microscopy

2021 ◽  
Vol 52 ◽  
pp. 38-46
Author(s):  
A.A. Ayu Asri Prima Dewi ◽  
Radiana D. Antarianto ◽  
Jeanne Adiwinata Pawitan
Keyword(s):  
Liver Tissue ◽  
Sodium Dodecyl ◽  
Complete Removal ◽  
Sem Analysis ◽  
Ethylene Glycol Tetraacetic Acid ◽  
Native Liver ◽  
Dna Materials ◽  
Protocol Study ◽  
Syringe Injection ◽  
Scanning Electron

Liver biological scaffold was developed in order to resemble native liver tissue environment. It can be achieved by decellularizing native liver tissue that will remove cells and preserve extracellular matrix (ECM). Furthermore, ECM fibers are arranged in a special pattern, which affect liver cell polarity and topography that are important for cells’ implantation, proliferation and differentiation. Therefore, the aim of this study was to evaluate liver cube scaffold topography that was decellularized with fixed multiple sites syringe injection (Indonesia patent number: S00201907930).Rat liver cubes (n=3) underwent decellularization with Ethylene Glycol Tetraacetic Acid (EGTA) immersion and increased Sodium Dodecyl Sulfate (SDS) concentrations using previous multiple sites syringe injection protocol study. Deoxyribonucleic Acid (DNA) concentrations were measured to confirm less DNA materials remaining in scaffolds. Scanning Electron Microscope (SEM) analysis of scaffolds were conducted for topographic characterization compared to undecellularized liver control. Molecular analysis of DNA concentration showed complete removal of DNA material. SEM analysis gave appearance of intact liver cube scaffold microarchitecture. Liver cubes decellularization using multiple sites syringe injection showed good topographic liver scaffold characterization.

Sign in / Sign up

Export Citation Format

Share Document