scholarly journals Mercapto-Functionalized Porous Organosilica Monoliths Loaded with Gold Nanoparticles for Catalytic Application

Molecules ◽  
2019 ◽  
Vol 24 (23) ◽  
pp. 4366
Author(s):  
Hongwei Li ◽  
Junhui Pan ◽  
Chengtao Gao ◽  
Mengyu Ma ◽  
Liangyu Lu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Gold Nanoparticles ◽  
Catalytic Performance ◽  
Base Hydrolysis ◽  
Catalytic Application ◽  
Transmission Electron ◽  
Porous Monolith ◽  
Excellent Mechanical Property ◽  
Polycondensation Process ◽  
Silane Precursor

Porous organosilica monoliths have attracted much attention from both the academic and industrial fields due to their porous structure; excellent mechanical property and easily functionalized surface. A new mercapto-functionalized silicone monolith from a precursor mixture containing methyltrimethoxysilane; 3-mercaptopropyltrimethoxysilane; and 3-mercaptopropyl(dimethoxy)methylsilane prepared via a two-step acid/base hydrolysis–polycondensation process was reported. Silane precursor ratios and surfactant type were varied to control the networks of porous monolithic gels. Gold nanoparticles were loaded onto the surface of the porous organosilica monolith (POM). Versatile characterization techniques were utilized to investigate the properties of the synthesized materials with and without gold nanoparticles. Scanning electron microscopy was used to investigate the morphology of the as-synthesized porous monolith materials. Fourier transform infrared spectroscopy was applied to confirm the surface chemistry. 29Si nuclear magnetic resonance was used to investigate the hydrolysis and polycondensation of organosilane precursors. Transmission electron microscopy was carried out to prove the existence of well-dispersed gold nanoparticles on the porous materials. Ultraviolet–visible spectroscopy was utilized to evaluate the high catalytic performance of the as-synthesized Au/POM particles

scholarly journals Enhanced Photocatalytic Activity of Cu2O Cabbage/RGO Nanocomposites under Visible Light Irradiation

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1712
Author(s):  
Appusamy Muthukrishnaraj ◽  
Salma Ahmed Al-Zahrani ◽  
Ahmed Al Otaibi ◽  
Semmedu Selvaraj Kalaivani ◽  
Ayyar Manikandan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thermo Gravimetric Analysis ◽  
Visible Region ◽  
Catalytic Performance ◽  
Precipitation Method ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Dye Pollutants ◽  
Transmission Electron

Towards the utilization of Cu2O nanomaterial for the degradation of industrial dye pollutants such as methylene blue and methyl orange, the graphene-incorporated Cu2O nanocomposites (GCC) were developed via a precipitation method. Using Hummers method, the grapheme oxide (GO) was initially synthesized. The varying weight percentages (1–4 wt %) of GO was incorporated along with the precipitation of Cu2O catalyst. Various characterization techniques such as Fourier-transform infra-red (FT-IR), X-ray diffraction (XRD), UV–visible diffused reflectance (UV-DRS), Raman spectroscopy, thermo gravimetric analysis (TGA), energy-dispersive X-ray analysis (EDX), and electro chemical impedance (EIS) were followed for characterization. The cabbage-like morphology of the developed Cu2O and its composites were ascertained from field-emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HR-TEM). In addition, the growth mechanism was also proposed. The results infer that 2 wt % GO-incorporated Cu2O composites shows the highest value of degradation efficiency (97.9% and 96.1%) for MB and MO at 160 and 220 min, respectively. Further, its catalytic performance over visible region (red shift) was also enhanced to an appreciable extent, when compared with that of other samples.

Synthesis and Characterization of Water-Soluble Monolayer-Protected Gold Nanoparticles

2011 ◽  
Vol 415-417 ◽  
pp. 617-620 ◽  
Author(s):  
Yan Su ◽  
Ying Yun Lin ◽  
Yu Li Fu ◽  
Fan Qian ◽  
Xiu Pei Yang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Gold Nanoparticles ◽  
Average Particle Size ◽  
Water Soluble ◽  
Synthesis And Characterization ◽  
Average Particle ◽  
Transmission Electron

Water-soluble gold nanoparticles (AuNPs) were prepared using 2-mercapto-4-methyl-5- thiazoleacetic acid (MMTA) as a stabilizing agent and sodium borohydride (NaBH4) as a reducing agent. The AuNPs product was analyzed by transmission electron microscopy (TEM), UV-vis absorption spectroscopy and Fourier transform infrared spectroscopy (FTIR). The TEM image shows that the particles were well-dispersed and their average particle size is about 5 nm. The UV-vis absorption and FTIR spectra confirm that the MMTA-AuNPs was stabilized by the carboxylate ions present on the surface of the AuNPs.

scholarly journals Effects of Different Surfactant Charges on the Formation of Gold Nanoparticles by the LASiS Method

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2937
Author(s):  
Muhammad Zulfajri ◽  
Wei-Jie Huang ◽  
Genin-Gary Huang ◽  
Hui-Fen Chen
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Gold Nanoparticles ◽  
Laser System ◽  
Synthesis Process ◽  
Au Nps ◽  
Laser Fluences ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
532 Nm

The laser ablation synthesis in solution (LASiS) method has been widely utilized due to its significant prospects in laser microprocessing of nanomaterials. In this study, the LASiS method with the addition of different surfactant charges (cationic CTAB, nonionic TX-100, and anionic SDS) was used to produce Au NPs. An Nd:YAG laser system at 532 nm excitation with some synthetic parameters, including different laser fluences, ablation times, and surfactant concentrations was performed. The obtained Au NPs were characterized by UV-Vis spectroscopy, transmission electron microscopy, and zeta potential analyzer. The Au NPs exhibited the maximum absorption peak at around 520 nm for all samples. The color of Au NPs was changed from red to reddish by increasing the laser fluence. The surfactant charges also played different roles in the Au NPs’ growth during the synthesis process. The average sizes of Au NPs were found to be 8.5 nm, 5.5 nm, and 15.5 nm with the medium containing CTAB, TX-100, and SDS, respectively. Besides, the different surfactant charges induced different performances to protect Au NPs from agglomeration. Overall, the SDS and CTAB surfactants exhibited higher stability of the Au NPs compared to the Au NPs with TX-100 surfactant.

Synthesis and Study the Properties of a Solar Cell of Gold Nanoparticles Prepared in a Simple Chemical Way

2021 ◽  
Vol 19 (11) ◽  
pp. 66-71
Author(s):  
Maithm A. Obaid ◽  
Suha A Fadaam ◽  
Osama S. Hashim
Keyword(s):  
Electron Microscopy ◽  
Gold Nanoparticles ◽  
Chemical Method ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Casting Method ◽  
X Ray ◽  
Transmission Electron ◽  
Simple Chemical ◽  
Scanning Electron

The aim of this study is to prepare gold nanoparticles by a simple chemical method at a temperature of 70°C. The solution was dried on glass basest by Casting method, the rate of five drops per sample At a temperature 100 C. Then the structural and optical properties have been confirmed by X-ray diffraction, scanning electron microscopy (SEM) and Transmission Electron microscope (TEM), Fourier Transform Infrared Spectroscopy (FTIR) and spectrum.

scholarly journals Biosynthesized gold nanoparticles-doped hydroxyapatite as antibacterial and antioxidant nanocomposite

2021 ◽  
Author(s):  
Is Fatimah ◽  
Putwi Widya Citradewi ◽  
Amri Yahya ◽  
Bambang Nugroho ◽  
Habibi Hidayat ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Antioxidant Activity ◽  
Particle Size ◽  
Gold Nanoparticles ◽  
Antibacterial Activity ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Dpph Scavenging Activity ◽  
Dpph Scavenging

Abstract The composite of green synthesized gold nanoparticles (Au NPs)-doped hydroxyapatite (HA) has been prepared. The gold nanoparticles were produced via bioreduction of HAuCl4 with Clitoria ternatea flower extract, and utilized in the synthesis of hydroxyapatite using Ca(OH)2 and ammonium diphosphate as precursor. The aim of this research is to study the structural analysis of the composite and antibacterial activity test toward Eschericia coli, Staphylococcus aureus, Klebsiela pneumoniae, and Streptococcus pyogenes. In addition, the antioxidant activity was evaluated using 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging method. The monitoring of gold nanoparticles formation was conducted by UV–vis spectroscopy and particle size analyses, meanwhile the synthesized composite was studied using X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The results showed that homogeneously dispersed gold nanoparticles in HA structure was obtained with the particle size ranging at 5-80 nm. The nanocomposite demonstrated antibacterial activity against tested bacteria. The nanocomposite expressed an antioxidant activity as shown by the DPPH scavenging activity of 66 and 58% at the concentration of 100 μg/mL and 50 μg/mL, respectively.

Aquatic Fern (AzollaSp.) Assisted Synthesis of Gold Nanoparticles

2016 ◽  
Vol 15 (01n02) ◽  
pp. 1650008 ◽  
Author(s):  
Anal K. Jha ◽  
K. Prasad
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Gold Nanoparticles ◽  
Surface Plasmon Resonance ◽  
Au Nanoparticles ◽  
X Ray ◽  
Aquatic Fern ◽  
Transmission Electron ◽  
Anthraquinone Glycosides ◽  
Uv Visible

Aquatic pteridophyte (Azolla sp.) was taken to assess its potential to synthesize the metal (Au) nanoparticles. The synthesized particles were characterized using X-ray, UV-visible, scanning and transmission electron microscopy analyses. Nanoparticles almost spherical in shape having the sizes of 5–17[Formula: see text]nm are found. UV-visible study revealed the surface plasmon resonance at 538[Formula: see text]nm. Responsible phytochemicals for the transformation were principally phenolics, tannins, anthraquinone glycosides and sugars present abundantly in the plant thereby bestowing it adaptive prodigality. Also, the use of Azolla sp. for the synthesis of gold nanoparticles offers the benefit of eco-friendliness.

Detection of Gold Nanoparticles in Rat Organs by Transmission Electron Microscopy

2016 ◽  
Vol 160 (6) ◽  
pp. 817-822 ◽  
Author(s):  
T. A. Platonova ◽  
S. M. Pridvorova ◽  
A. V. Zherdev ◽  
I. V. Gmoshinskii ◽  
L. S. Vasilevskaya ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Gold Nanoparticles ◽  
Rat Organs ◽  
Transmission Electron

Self-Healing and Self-Organized Gold Nanoparticle Films at a Water/Organic Solvent Interface

2006 ◽  
Vol 6 (1) ◽  
pp. 130-134 ◽  
Author(s):  
Olivier Balmes ◽  
Jan-Olov Bovin ◽  
Jan-Olle Malm
Keyword(s):  
Thin Film ◽  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Gold Nanoparticles ◽  
Organic Solvent ◽  
Continuous Production ◽  
Self Healing ◽  
Self Organized ◽  
Transmission Electron ◽  
20 Nm

Gold nanoparticles (5 nm and 20 nm) have been synthesized and stabilized with mercaptoundecanol. These particles, although insoluble in water or common organic solvents, spread as a thin film at the liquid–liquid interface between a water phase and an organic phase. Films of these gold nanoparticles have been observed both by conventional transmission electron microscopy of deposited samples and by cryo-transmission electron microscopy of plunge-frozen samples. The film can be monolayered and extend over centimeter-sized areas. The particle films spontaneously re-assemble and self-organize at the interface when disrupted. This self-healing capacity of the film should make it possible to build a device for continuous production and deposition of the film.

Sign in / Sign up

Export Citation Format

Share Document