scholarly journals Recent Advances on Iron(III) Selective Fluorescent Probes with Possible Applications in Bioimaging

Molecules ◽  
2019 ◽  
Vol 24 (18) ◽  
pp. 3267 ◽  
Author(s):  
Sahoo ◽  
Crisponi

Iron(III) is well-known to play a vital role in a variety of metabolic processes in almost all living systems, including the human body. However, the excess or deficiency of Fe3+ from the normal permissible limit can cause serious health problems. Therefore, novel analytical methods are developed for the simple, direct, and cost-effective monitoring of Fe3+ concentration in various environmental and biological samples. Because of the high selectivity and sensitivity, fast response time, and simplicity, the fluorescent-based molecular probes have been developed extensively in the past few decades to detect Fe3+. This review was narrated to summarize the Fe3+-selective fluorescent probes that show fluorescence enhancement (turn-on) and ratiometric response. The Fe3+ sensing ability, mechanisms along with the analytical novelties of recently reported 77 fluorescent probes are discussed.

The Analyst ◽  
2021 ◽  
Author(s):  
Ya-Xi Ye ◽  
Xin-Yue Chen ◽  
Ya-Wen Yu ◽  
Qing Zhang ◽  
Xiao-Wen Wei ◽  
...  

Most of ONOO− fluorescent probes have been restricted their further applications because of their aggregation-caused quenching (ACQ) effect, long response time and low fluorescence enhancement. Herein, we developed a novel...


2021 ◽  
Author(s):  
Sumit Kumar Pramanik ◽  
Amitava Das

Luminescent molecular probes and nanoscale materials have become important tools in biosensing and bioimaging applications because of their high sensitivity, fast response, specificity, and methodological simplicity. In recent years, there...


2013 ◽  
pp. 109-128 ◽  
Author(s):  
C. Rühl

This paper presents the highlights of the third annual edition of the BP Energy Outlook, which sets out BP’s view of the most likely developments in global energy markets to 2030, based on up-to-date analysis and taking into account developments of the past year. The Outlook’s overall expectation for growth in global energy demand is to be 36% higher in 2030 than in 2011 and almost all the growth coming from emerging economies. It also reflects shifting expectations of the pattern of supply, with unconventional sources — shale gas and tight oil together with heavy oil and biofuels — playing an increasingly important role and, in particular, transforming the energy balance of the US. While the fuel mix is evolving, fossil fuels will continue to be dominant. Oil, gas and coal are expected to converge on market shares of around 26—28% each by 2030, and non-fossil fuels — nuclear, hydro and renewables — on a share of around 6—7% each. By 2030, increasing production and moderating demand will result in the US being 99% self-sufficient in net energy. Meanwhile, with continuing steep economic growth, major emerging economies such as China and India will become increasingly reliant on energy imports. These shifts will have major impacts on trade balances.


TAPPI Journal ◽  
2018 ◽  
Vol 17 (09) ◽  
pp. 519-532 ◽  
Author(s):  
Mark Crisp ◽  
Richard Riehle

Polyaminopolyamide-epichlorohydrin (PAE) resins are the predominant commercial products used to manufacture wet-strengthened paper products for grades requiring wet-strength permanence. Since their development in the late 1950s, the first generation (G1) resins have proven to be one of the most cost-effective technologies available to provide wet strength to paper. Throughout the past three decades, regulatory directives and sustainability initiatives from various organizations have driven the development of cleaner and safer PAE resins and paper products. Early efforts in this area focused on improving worker safety and reducing the impact of PAE resins on the environment. These efforts led to the development of resins containing significantly reduced levels of 1,3-dichloro-2-propanol (1,3-DCP) and 3-monochloropropane-1,2-diol (3-MCPD), potentially carcinogenic byproducts formed during the manufacturing process of PAE resins. As the levels of these byproducts decreased, the environmental, health, and safety (EH&S) profile of PAE resins and paper products improved. Recent initiatives from major retailers are focusing on product ingredient transparency and quality, thus encouraging the development of safer product formulations while maintaining performance. PAE resin research over the past 20 years has been directed toward regulatory requirements to improve consumer safety and minimize exposure to potentially carcinogenic materials found in various paper products. One of the best known regulatory requirements is the recommendations of the German Federal Institute for Risk Assessment (BfR), which defines the levels of 1,3-DCP and 3-MCPD that can be extracted by water from various food contact grades of paper. These criteria led to the development of third generation (G3) products that contain very low levels of 1,3-DCP (typically <10 parts per million in the as-received/delivered resin). This paper outlines the PAE resin chemical contributors to adsorbable organic halogens and 3-MCPD in paper and provides recommendations for the use of each PAE resin product generation (G1, G1.5, G2, G2.5, and G3).


2020 ◽  
Vol 6 (3) ◽  
pp. 180-191
Author(s):  
Kavitha Chandrasekaran

Background:: In the long run, synthetic tints were found to be harmful to the chemicals. As a result natural tints have come to be used for their many intrinsic values. The main reason being, then availability of local plants as the main source of natural colorants. Their easy availability in the country being zero cost – effective and planted for other purposes are the main reasons for utilizing them as natural tints. Almost all the parts of the plants, namely stem, leaves, fruits, seeds, barks etc. are used for extracting natural colour. In addition, they are antimicrobial antifungal, insect – repellant deodorant, disinfectant having medicinal values. Methods:: Sweet Indrajao leaves were cleaned by washing with water and dried under direct sunlight and ground as fine powder. A fine strainer was used to remove the wastages. After all these processes, 1-kilogram leaves weighed 318 grams. Then, it is put in 75% ethanol 25% water and heated in a breaker which in kept over a water bath for 2 hours. After this, the contents were filtered and kept in a separate beaker. Bleached fleece draperies stained with stain extract were made to become wet and put into different stain baths which contain the required amount of stain extract and water. Acetic acid was added to it after 20 minutes. The fleece drapery was stained for about one hour at 60oC. The draperies thus stained were removed, squeezed, and put to treatment with metal salts without washing. Different metal salts were used for the treatment using 3% of any one of the chemical mordants like alum, stannous chloride, potassium dichromate, ferrous sulphate, nickel sulphate, copper sulphate and natural mordants such as myrobolan, turmeric, cow dung, Banana sap juice at 60oC for 30 minutes with MLR of 1:30. The stained draperies were washed repeatedly in all the three methods in water and dried in air. At last, the stained draperies were put to soap with soap solution at 60oC for 10 minutes. The draperies were repeatedly washed in water and dried under the sun. Results:: Sweet Indrajao leaves discharged colour easily in alcoholic water. The fleece draperies were stained with chemical and natural mordants. It was observed that the stain uptake was found to be good in post-mordanting method. Ultrasonication has clearly improved the stainability of the draperies at pH 3 and 3.5 values. The pH decreases the stain ability under both Conventional and Ultrasonic conditions. The colour strength increases with an increase in staining temperature in both cases of US and CH methods. Conclusion:: Sweet Indrajao.L has been found to have good ultrasonic potential as a stain plant. The stain uptake as well as the fastness properties of the fleece drapery were found to enhance when metal mordant was used in conjugation with ultra-sonication for the extract of Sweet Indrajao. It was also found that the enhancement of staining ability was better without mordant draperies. The dye extract showed good antibacterial activity against the three bacterial pathogens. Among the three bacterial pathogens, dye extract showed more effective against Escherichia coli pathogens and dye extract showed more effective against Aspergillus pathogens. Hence, the ultrasonic method of drapery staining may be appropriate and beneficial for society at large in future.


Author(s):  
Ken Peach

This chapter discusses the process of building research teams. Increasingly over the past three-quarters of a century, science has become a collective activity, with teams of tens, hundreds or even thousands of scientists, engineers and technicians working together on a common goal. Consequently, almost all research involves building, motivating and maintaining a research team. Even a theoretical group is likely to have one or two postdocs, graduate students and visitors, but research teams will, in addition, have engineers and technicians, as well as, possibly, research administrators. The chapter also addresses the importance of creating and maintaining a good team and team spirit, as large projects are assembled from a large number of small teams working on common goals, usually in a loose federated structure with some overall coordination and leadership.


2021 ◽  
Author(s):  
Erin C. Wilson ◽  
Christopher J. Hernandez ◽  
Susan Scheer ◽  
Dillon Trujillo ◽  
Sean Arayasirikul ◽  
...  

AbstractTransgender women face a serious risk of HIV infection. Despite this, there is limited knowledge and use of Pre-exposure prophylaxis (PrEP). We measured the continuity of prevention across services in the PrEP cascade and correlates of PrEP use among trans women in San Francisco enrolled in the 2019/20 National HIV Behavioral Surveillance Study. Knowledge and use of PrEP among trans women in San Francisco increased in recent years; almost all (94.0%) had heard about PrEP, 64.7% had discussed PrEP with a healthcare provider, and 44.8% had taken PrEP in the past 12 months. PrEP use was associated with participation in a PrEP demonstration project (aOR = 31.44, p = 0.001) and condomless receptive anal intercourse (aOR = 3.63, p = 0.024). Injection drug use was negatively associated (aOR = 0.19, p = 0.014). Efforts are needed to combat the gender-based stigma and discrimination faced by trans women, which can result in avoidance and mistrust of the medical system.


Biology ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 317
Author(s):  
Eitan Mijiritsky ◽  
Haya Drora Assaf ◽  
Oren Peleg ◽  
Maayan Shacham ◽  
Loredana Cerroni ◽  
...  

Growth factors (GFs) play a vital role in cell proliferation, migration, differentiation and angiogenesis. Autologous platelet concentrates (APCs) which contain high levels of GFs make them especially suitable for periodontal regeneration and facial rejuvenation. The main generations of APCs presented are platelet-rich plasma (PRP), platelet-rich fibrin (PRF) and concentrated growth factor (CGF) techniques. The purpose of this review is to provide the clinician with an overview of APCs’ evolution over the past decade in order to give reliable and useful information to be used in clinical work. This review summarizes the most interesting and novel articles published between 1997 and 2020. Electronic and manual searches were conducted in the following databases: Pubmed, Scopus, Cochrane Library and Embase. The following keywords were used: growth factors, VEGF, TGF-b1, PRP, PRF, CGF and periodontal regeneration and/or facial rejuvenation. A total of 73 articles were finally included. The review then addresses the uses of the three different techniques in the two disciplines, as well as the advantages and limitations of each technique. Overall, PRP is mainly used in cases of hard and soft tissue procedures, while PRF is used in gingival recession and the treatment of furcation and intrabony defects; CGF is mainly used in bone regeneration.


Author(s):  
Venkatesh Piradi ◽  
Feng Yan ◽  
Xunjin Zhu ◽  
Wai-Yeung Raymond Wong

Organic solar cells (OSCs) have been considered as a promising cost-effective alternative to silicon-based solar cell counterparts due to their lightweight, mechanical flexibility, and easy fabrication features. Over the past...


Sign in / Sign up

Export Citation Format

Share Document