scholarly journals Use of Confectionery Waste in Biogas Production by the Anaerobic Digestion Process

Molecules ◽  
2018 ◽  
Vol 24 (1) ◽  
pp. 37 ◽  
Author(s):  
Agnieszka A. Pilarska ◽  
Krzysztof Pilarski ◽  
Agnieszka Wolna-Maruwka ◽  
Piotr Boniecki ◽  
Maciej Zaborowicz
Keyword(s):  
Anaerobic Digestion ◽  
Volatile Fatty Acids ◽  
Biogas Production ◽  
Test Material ◽  
Biochemical Methane Potential ◽  
Biogas Yield ◽  
Ph Values ◽  
Chemical Equations ◽  
Biogas Plants ◽  
Methane Potential

It was the objective of this study to verify the efficiency and stability of anaerobic digestion (AD) for selected confectionery waste, including chocolate bars (CB), wafers (W), and filled wafers (FW), by inoculation with digested cattle slurry and maize silage pulp. Information in the literature on biogas yield for these materials and on their usefulness as substrate in biogas plants remains to be scarce. Owing to its chemical structure, including the significant content of carbon-rich carbohydrates and fat, the confectionery waste has a high biomethane potential. An analysis of the AD process indicates differences in the fluctuations of the pH values of three test samples. In comparison with W and FW, CB tended to show slightly more reduced pH values in the first step of the process; moreover an increase in the content of volatile fatty acids (VFA) was recorded. In the case of FW, the biogas production process showed the highest stability. Differences in the decomposition dynamics for the three types of test waste were accounted for by their different carbohydrate contents and also different biodegradabilities of specific compounds. The highest efficiency of the AD process was obtained for the filled wafers, where the biogas volumes, including methane, were 684.79 m3 Mg−1 VS and 506.32 m3 Mg−1 VS, respectively. A comparable volume of biogas (673.48 m3 Mg−1 VS) and a lower volume of methane (407.46 m3 Mg−1 VS) were obtained for chocolate bars. The lowest volumes among the three test material types, i.e., 496.78 m3 Mg−1 VS (biogas) and 317.42 m3 Mg−1 VS (methane), were obtained for wafers. This article also proposes a method of estimation of the biochemical methane potential (theoretical BMP) based on the chemical equations of degradation of sugar, fats, and proteins and known biochemical composition (expressed in grams).

scholarly journals Biochemical Methane Potential of Cork Boiling Wastewater at Different Inoculum to Substrate Ratios

2021 ◽  
Vol 11 (7) ◽  
pp. 3064
Author(s):  
Roberta Mota-Panizio ◽  
Manuel Jesús Hermoso-Orzáez ◽  
Luis Carmo-Calado ◽  
Gonçalo Lourinho ◽  
Paulo Sérgio Duque de Brito
Keyword(s):  
Anaerobic Digestion ◽  
Biogas Production ◽  
Treatment Plant ◽  
Organic Substrates ◽  
Biochemical Methane Potential ◽  
Volatile Solids ◽  
Working Volume ◽  
Methane Potential ◽  
Bmp Test ◽  
Cork Industry

The present study evaluates the digestion of cork boiling wastewater (CBW) through a biochemical methane potential (BMP) test. BMP assays were carried out with a working volume of 600 mL at a constant mesophilic temperature (35 °C). The experiment bottles contained CBW and inoculum (digested sludge from a wastewater treatment plant (WWTP)), with a ratio of inoculum/substrate (Ino/CBW) of 1:1 and 2:1 on the basis of volatile solids (VSs); the codigestion with food waste (FW) had a ratio of 2/0.7:0.3 (Ino/CBW:FW) and the codigestion with cow manure (CM) had a ratio of 2/0.5:0.5 (Ino/CBW:CM). Biogas and methane production was proportional to the inoculum substrate ratio (ISR) used. BMP tests have proved to be valuable for inferring the adequacy of anaerobic digestion to treat wastewater from the cork industry. The results indicate that the biomethane potential of CBWs for Ino/CBW ratios 1:1 and 2:1 is very low compared to other organic substrates. For the codigestion tests, the test with the Ino/CBW:CM ratio of 2/0.7:0.3 showed better biomethane yields, being in the expected values. This demonstrated that it is possible to perform the anaerobic digestion (AD) of CBW using a cosubstrate to increase biogas production and biomethane and to improve the quality of the final digestate.

Use of near infrared spectroscopy in monitoring of volatile fatty acids in anaerobic digestion

2009 ◽  
Vol 60 (2) ◽  
pp. 339-346 ◽  
Author(s):  
H. Fabian Jacobi ◽  
Christian R. Moschner ◽  
Eberhard Hartung
Keyword(s):  
Fatty Acids ◽  
Acetic Acid ◽  
Infrared Spectroscopy ◽  
Anaerobic Digestion ◽  
Propionic Acid ◽  
Near Infrared Spectroscopy ◽  
Volatile Fatty Acids ◽  
Near Infrared ◽  
Biogas Production ◽  
Biogas Plants

Recently biogas production from agricultural sources has rapidly developed. Therefore the demands on biogas plants to optimise the efficiency of the anaerobic digestion (AD) process have grown immensely. At present there is no online-supervision tool available to monitor the AD process, but costly and time-consuming chemical analyses are necessary. The possibility to use near-infrared spectroscopy (NIRS) in order to track relevant process parameters like total volatile fatty acids (VFA), acetic acid and propionic acid was investigated in the present research project. A NIR-sensor was integrated into a full-scale 1 MW biogas plant and NIR-spectra of the fermenter contents were recorded semi-continuously for 500 days. Weekly samples were taken and analysed for the above mentioned parameters. Calibration models were calculated, capable of following these parameters: VFA (r2=0.94), acetic acid (r2=0.69), propionic acid (r2=0.89).

scholarly journals Impact of Attrition Ball-Mill on Characteristics and Biochemical Methane Potential of Food Waste

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2085
Author(s):  
Yang Mo Gu ◽  
Seon Young Park ◽  
Ji Yeon Park ◽  
Byoung-In Sang ◽  
Byoung Seong Jeon ◽  
...  
Keyword(s):  
Particle Size ◽  
Anaerobic Digestion ◽  
Food Waste ◽  
Methane Production ◽  
Ball Mill ◽  
Volatile Fatty Acids ◽  
Milling Time ◽  
Biochemical Methane Potential ◽  
Methane Potential ◽  
The Impact

The impact of attrition ball-mill pretreatment on food waste particle size, soluble chemical oxygen demand (SCOD), biochemical methane potential, and microbial community during anaerobic digestion was investigated based on milling speed and time. The uniformity of particle size improved with increasing milling speed and time. The SCOD of the pretreated samples increased to 4%, 7%, and 17% at the speeds of 150, 225, and 300 rpm, respectively, compared to the control. Milling time did not significantly change the SCOD. The cumulative methane productions of 430, 440, and 490 mL/g-VS were observed at the speeds of 150, 225, and 300 rpm, respectively, while the untreated sample exhibited the cumulative methane production of 390 mL/g-VS. Extended milling time did not improve methane production much. When the milling times of 10, 20, and 30 min were applied with the milling speed fixed at 300 rpm, the methane productions of 490, 510, and 500 mL/g-VS were observed respectively. Ball-mill pretreatment also increased the total volatile fatty acids. During the anaerobic digestion (AD) of ball-mill treated food waste, acetoclastic methanogens predominated, with a relative abundance of 48–49%. Interestingly, hydrogenotrophic methanogens were 1.6 times higher in the pretreated samples than those in the control. These results showed the potential of attrition ball milling as a food waste pretreatment for improving methane production.

Mesophilic Fermentation of SOMW in a Micro Pilot-Scale Anaerobic Digester

2013 ◽  
Vol 827 ◽  
pp. 84-90 ◽  
Author(s):  
Maurizio Carlini ◽  
Sonia Castellucci ◽  
Silvia Cocchi
Keyword(s):  
Anaerobic Digestion ◽  
Energy Production ◽  
Biogas Production ◽  
Ph Control ◽  
Pilot Scale ◽  
Biochemical Methane Potential ◽  
Mediterranean Countries ◽  
Methane Potential ◽  
Environmentally Sound ◽  
Bmp Test

One of the most promising processes to exploit Solid Olive-Mill Waste (SOMW) for energy production is anaerobic digestion. An experimental study has been carried out on SOMW and inoculum, consisting of Cattle Slurry Digested (CSD) and coming from an anaerobic digestion plant. A substrate with an optimal supply ratio equal to 2:1 has been investigated in a reactor at 37°C by analysing the biogas production. The Biochemical Methane Potential (BMP) test has been carried out, monitoring pH, biogas production (amount and composition). According to the tests results, SOMWs needed to be diluted and inoculated, moreover the pH control is foundamental in order to obtain a significant biogas production. Anaerobic digestion plant of SOMW should be promoted in Mediterranean countries as an environmentally sound option for waste management and energy production, since olive mills are very widespread agro-industries in this area.

scholarly journals Biomethane Potential Test: Influence of Inoculum and the Digestion System

2020 ◽  
Vol 10 (7) ◽  
pp. 2589 ◽  
Author(s):  
Benedikt Hülsemann ◽  
Lijun Zhou ◽  
Wolfgang Merkle ◽  
Juli Hassa ◽  
Joachim Müller ◽  
...  
Keyword(s):  
Laboratory Tests ◽  
Methane Yield ◽  
Biochemical Methane Potential ◽  
Measurement Variability ◽  
Biogas Yield ◽  
Yield Test ◽  
Biogas Plants ◽  
Methane Potential ◽  
Bmp Test

High precision of measurement of methane potential is important for the economic operation of biogas plants in the future. The biochemical methane potential (BMP) test based on the VDI 4630 protocol is the state-of-the-art method to determine the methane potential in Germany. The coefficient of variation (CV) of methane yield was >10% in several previous inter-laboratory tests. The aim of this work was to investigate the effects of inoculum and the digestion system on the measurement variability. Methane yield and methane percentage of five substrates were investigated in a Hohenheim biogas yield test (D-HBT) by using five inocula, which were used several times in inter- laboratory tests. The same substrates and inocula were also tested in other digestion systems. To control the quality of the inocula, the effect of adding trace elements (TE) and the microbial community was investigated. Adding TE had no influence for the selected, well- supplied inocula and the community composition depended on the source of the inocula. The CV of the specific methane yield was <4.8% by using different inocula in one D-HBT (D-HBT1) and <12.8% by using different digestion systems compared to D-HBT1. Incubation time between 7 and 14 days resulted in a deviation in CV of <4.8%.

scholarly journals Effects of Hydrothermal Pretreatment and Hydrochar Addition on the Performance of Pig Carcass Anaerobic Digestion

2021 ◽  
Vol 12 ◽  
Author(s):  
Jie Xu ◽  
Hongjian Lin ◽  
Kuichuan Sheng
Keyword(s):  
Anaerobic Digestion ◽  
Volatile Fatty Acids ◽  
Biogas Production ◽  
Oxygen Demand ◽  
Ammonia Concentration ◽  
Hydrothermal Pretreatment ◽  
Biogas Yield ◽  
Stirred Tank Reactors ◽  
Liquid Products ◽  
Pig Carcasses

Proper disposal and utilization of dead pig carcasses are problems of public concern. The combination of hydrothermal pretreatment (HTP) and anaerobic digestion is a promising method to treat these wastes, provided that digestion inhibition is reduced. For this reason, the aim of this work was to investigate the optimal HTP temperature (140–180°C) for biogas production during anaerobic digestion of dead pigs in batch systems. In addition, the effects of hydrochar addition (6 g/L) on anaerobic digestion of pork products after HTP in continuous stirred tank reactors (CSTR) were determined. According to the results, 90% of lipids and 10% of proteins present in the pork were decomposed by HTP. In addition, the highest chemical oxygen demand (COD) concentration in liquid products (LP) reached 192.6 g/L, and it was obtained after 170°C HTP. The biogas potential from the solid residue (SR) and LP was up to 478 mL/g-VS and 398 mL/g-COD, respectively. A temperature of 170°C was suitable for pork HTP, which promoted the practical biogas yield because of the synergistic effect between proteins and lipids. Ammonia inhibition was reduced by the addition of hydrochar to the CSTR during co-digestion of SR and LP, maximum ammonia concentration tolerated by methanogens increased from 2.68 to 3.38 g/L. This improved total biogas yield and degradation rate of substrates, reaching values of 28.62 and 36.06%, respectively. The acetate content in volatile fatty acids (VFA) may be used as an index that reflects the degree of methanogenesis of the system. The results of the present work may also provide guidance for the digestion of feedstock with high protein and lipid content.

scholarly journals Assessment of the biogas potential from agricultural waste in northern Thailand

2019 ◽  
Vol 1 (1) ◽  
pp. 40-47
Author(s):  
Jiraporn Kaewdiew ◽  
Rameshprabu Ramaraj ◽  
Sirichai Koonaphapdeelert ◽  
Natthawud Dussadee
Keyword(s):  
Biogas Production ◽  
Agricultural Waste ◽  
Waste Utilization ◽  
Agricultural Products ◽  
Waste Generation ◽  
Corn Cob ◽  
Biochemical Methane Potential ◽  
Northern Thailand ◽  
Biogas Yield ◽  
Methane Potential

In 2014-2015, there was approximately 26,823.44 x106 kg of the residue leftover from agricultural products in Northern Thailand and roughly 18,943.57x106 kg or 70.62% were left unutilized. The aim of this research was to survey and calculate the proportion of agricultural area and products as well as their corresponding waste towards potential of biogas production using biochemical methane potential (BMP) method. The results showed that rice straw was the most promising feedstock for methane production with the highest biogas yield of 363 mlN /gVSadded followed by sugarcane leaves and corn cob having 333 and 318 mlN/gVSadded, respectively. Additionally, the predicted areas for growing rice and corn decreased. Meanwhile areas for growing cassava, sugarcane and oil palm increase slightly. This study also found out that the unused agricultural waste generation was decreased due to improved waste utilization.

scholarly journals A Review of the Role of Critical Parameters in the Design and Operation of Biogas Production Plants

2019 ◽  
Vol 9 (9) ◽  
pp. 1915 ◽  
Author(s):  
Shiplu Sarker ◽  
Jacob J. Lamb ◽  
Dag R. Hjelme ◽  
Kristian M. Lien
Keyword(s):  
Anaerobic Digestion ◽  
Biogas Production ◽  
Real Life ◽  
Process Condition ◽  
Critical Parameters ◽  
Organic Loading Rate ◽  
Operational Parameters ◽  
Biogas Yield ◽  
Yield And Quality ◽  
Biogas Plants

Many operating parameters, individually or together, may influence the performance of anaerobic digestion towards biogas or digestate yield and quality maximization. The most preferred method of optimizing an anaerobic digestion plant often relies on how carefully the crucial parameters, such as pH, temperature, organic loading rate, hydraulic retention time, and pressure, are chosen. There is a large amount of literature available on optimization of anaerobic digestion; however, given the continued development and implementation of innovative technologies, together with the introduction of increasingly complex systems, it is necessary to update present knowledge on process parameters and their role on operational ranges and flexibilities in real-life anaerobic digestion system. Accordingly, the present review discusses the importance of the selection of operational parameters in existing technologies and their impact on biogas yield. Notably, the four broad areas of feedstock utilization (substrate, inoculum, codigestion and pretreatment), process condition (pH, temperature, pressure, and reactor design), reactor control (HRT and OLR) and inhibition (Ammonia and VFAs) are covered in this review. In addition, particular emphasis is placed on the most recent innovations that have been or may be implemented in current or future biogas plants.

Effect of operating conditions and reactor configuration on efficiency of full-scale biogas plants

2005 ◽  
Vol 52 (1-2) ◽  
pp. 189-194 ◽  
Author(s):  
I. Angelidaki ◽  
K. Boe ◽  
L. Ellegaard
Keyword(s):  
Volatile Fatty Acids ◽  
Hydraulic Retention Time ◽  
Biogas Production ◽  
Full Scale ◽  
Operating Conditions ◽  
Temperature Changes ◽  
Operational Temperature ◽  
High Ammonia ◽  
Biogas Plants ◽  
Methane Potential

A study on 18 full-scale centralized biogas plants was carried out in order to find significant operational factors influencing productivity and stability of the plants. It was found that the most plants were operating relatively stable with volatile fatty acids (VFA) concentration below 1.5 g/l. VFA concentration increase was observed in occasions with dramatic overloading or other disturbances such as operational temperature changes. Ammonia was found to be a significant factor for stability. A correlation between increased residual biogas production and high ammonia was found. When ammonia was higher than approx. 4 g-N/l the degradation efficiency of the plant decreased and as a consequence, the residual methane potential was high. Decrease of the residual methane potential with increasing hydraulic retention time was found. Digestion temperature was very important for effective post-digestion. Post-digestion for recovering the residual methane potential at temperatures below 15 °C was very inefficient.

Sign in / Sign up

Export Citation Format

Share Document