scholarly journals Surface Organic Modification of CaCO3-TiO2 Composite Pigment

Minerals ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 112
Author(s):  
Sijia Sun ◽  
Hao Ding ◽  
Yanpeng Zha ◽  
Wanting Chen ◽  
Zhuoqun Xu
Keyword(s):  
Surface Modification ◽  
Sodium Stearate ◽  
Hydrophobic Surface ◽  
Infrared Spectrometry ◽  
Organic Modifier ◽  
Mechanical Grinding ◽  
X Ray ◽  
Chemical Combination ◽  
Organic Matrices ◽  
Ultra Fine Grinding

To improve the properties and dispersibility of CaCO3-TiO2 composite pigments (CaCO3-TiO2) in organic matrices, the surface modification of CaCO3-TiO2 was performed with sodium stearate (SS) as an organic modifier by wet ultra-fine grinding in a stirred mill. The pigment properties of modified CaCO3-TiO2 and its dispersibility in organic media were tested and characterized. The binding mechanism between CaCO3-TiO2 and SS was explored by infrared spectrometry (IR) and X-ray photoelectron energy spectroscopy (XPS). The results showed that the mechanical grinding strength and SS dosage had a significant effect on the activation index and sedimentation rate of CaCO3-TiO2. After surface modification, the surface of CaCO3-TiO2 turned from a hydrophilic surface to a hydrophobic surface and the surface free energy was reduced. In addition, the hiding property and dispersibility of CaCO3-TiO2 in the organic medium were significantly improved. IR and XPS results indicated that the modifier SS was adsorbed on the surface of CaCO3-TiO2 by chemical combination.

Chemical Species Identification in an SEM by Changes in Emitted X-Ray Energies

1974 ◽  
Vol 32 ◽  
pp. 570-571
Author(s):  
R. H. Duff
Keyword(s):  
Species Identification ◽  
Valence Electron ◽  
Chemical Species ◽  
X Rays ◽  
Chemical Bonds ◽  
Small Shift ◽  
X Ray ◽  
Electron Transitions ◽  
Peak Energy ◽  
Chemical Combination

A material irradiated with electrons emits x-rays having energies characteristic of the elements present. Chemical combination between elements results in a small shift of the peak energies of these characteristic x-rays because chemical bonds between different elements have different energies. The energy differences of the characteristic x-rays resulting from valence electron transitions can be used to identify the chemical species present and to obtain information about the chemical bond itself. Although these peak-energy shifts have been well known for a number of years, their use for chemical-species identification in small volumes of material was not realized until the development of the electron microprobe.

scholarly journals Assessment of Titanate Nanolayers in Terms of Their Physicochemical and Biological Properties

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 806
Author(s):  
Michalina Ehlert ◽  
Aleksandra Radtke ◽  
Katarzyna Roszek ◽  
Tomasz Jędrzejewski ◽  
Piotr Piszczek
Keyword(s):  
Surface Modification ◽  
Substrate Surface ◽  
Biological Properties ◽  
Structure Characterization ◽  
Porous Coating ◽  
Apatite Formation ◽  
Sem Images ◽  
Energy Dispersion Spectroscopy ◽  
X Ray

The surface modification of titanium substrates and its alloys in order to improve their osseointegration properties is one of widely studied issues related to the design and production of modern orthopedic and dental implants. In this paper, we discuss the results concerning Ti6Al4V substrate surface modification by (a) alkaline treatment with a 7 M NaOH solution, and (b) production of a porous coating (anodic oxidation with the use of potential U = 5 V) and then treating its surface in the abovementioned alkaline solution. We compared the apatite-forming ability of unmodified and surface-modified titanium alloy in simulated body fluid (SBF) for 1–4 weeks. Analysis of the X-ray diffraction patterns of synthesized coatings allowed their structure characterization before and after immersing in SBF. The obtained nanolayers were studied using Raman spectroscopy, diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), and scanning electron microscopy (SEM) images. Elemental analysis was carried out using X-ray energy dispersion spectroscopy (SEM EDX). Wettability and biointegration activity (on the basis of the degree of integration of MG-63 osteoblast-like cells, L929 fibroblasts, and adipose-derived mesenchymal stem cells cultured in vitro on the sample surface) were also evaluated. The obtained results proved that the surfaces of Ti6Al4V and Ti6Al4V covered by TiO2 nanoporous coatings, which were modified by titanate layers, promote apatite formation in the environment of body fluids and possess optimal biointegration properties for fibroblasts and osteoblasts.

scholarly journals Synthesis of a novel aluminium salt of nitrogen-containing alkylphosphinate with high char formation to flame retard acrylonitrile–butadiene–styrene

2020 ◽  
Vol 7 (9) ◽  
pp. 200800
Author(s):  
Xue Yang ◽  
Hao Wang ◽  
Xueqing Liu ◽  
Jiyan Liu
Keyword(s):  
Acrylonitrile Butadiene Styrene ◽  
Infrared Spectrometry ◽  
X Ray ◽  
Ethyl Methyl ◽  
Flame Retardant Properties ◽  
The Fourier Transform ◽  
Micro Combustion Calorimeter ◽  
Combustion Calorimeter ◽  
Composition Of Products ◽  
Butadiene Styrene

A novel nitrogen-containing alkylphosphinate salt—aluminium β-(p-nitrobenzamide) ethyl methyl phosphinate (AlNP) was synthesized and used to flame retard acrylonitrile–butadiene–styrene copolymer (ABS). The Fourier transform infrared spectrometry, 1 H, 13 C and 31 P nuclear magnetic resonance and X-ray fluorescent spectroscopy (XRF) were applied to characterize the structure and composition of products. The flame retardancy performance, thermal properties and mechanical strength of the ABS/AlNP with respect to AlNP loading were investigated. AlNP was stable before 330°C and decomposed very slowly with residues high up to 56.1% at 700°C. Adding 25–30 wt% of AlNP alone can make ABS to pass V0 rating in the vertical burning tests (UL 94). The results according to the micro combustion calorimeter, thermogravimetric analysis showed that AlNP can depress the heating release and retard the thermal degradation of the ABS. Scanning electron microscopy observation of the residues from LOI test indicated that AlNP formed the condensed and tough residues layer during combustion; XRF analysis showed that the residues contained phosphorus and aluminium element and nitrogen element was not detected. The compact phosphorus/aluminium-rich substance acted as a barrier to enhance flame-retardant properties of the ABS.

scholarly journals Real Time Observation of X-ray-Induced Surface Modification Using Simultaneous XANES and XEOL-XANES

2013 ◽  
Vol 85 (20) ◽  
pp. 9556-9563 ◽  
Author(s):  
Annemie Adriaens ◽  
Paul Quinn ◽  
Sergey Nikitenko ◽  
Mark G. Dowsett
Keyword(s):  
Surface Modification ◽  
Real Time ◽  
X Ray ◽  
Time Observation ◽  
Real Time Observation

scholarly journals Upgrading pyrolytic residue from waste tires to commercial carbon black

2018 ◽  
Vol 36 (5) ◽  
pp. 436-444 ◽  
Author(s):  
Xue Zhang ◽  
Hengxiang Li ◽  
Qing Cao ◽  
Li’e Jin ◽  
Fumeng Wang
Keyword(s):  
Carbon Black ◽  
Value Added ◽  
Pyrolytic Carbon ◽  
Ultrasonic Waves ◽  
Added Value ◽  
Infrared Spectrometry ◽  
Raman Spectrometry ◽  
X Ray ◽  
Waste Tires ◽  
Commercial Carbon

The managing and recycling of waste tires has become a worldwide environmental challenge. Among the different disposal methods for waste tires, pyrolysis is regarded as a promising route. How to effectively enhance the added value of pyrolytic residue (PR) from waste tires is a matter of great concern. In this study, the PRs were treated with hydrochloric and hydrofluoric acids in turn under ultrasonic waves. The removal efficiency for the ash and sulfur was investigated. The pyrolytic carbon black (PCB) obtained after treating PR with acids was analyzed by X-ray fluorescence spectrophotometry, Fourier transform infrared spectrometry, X-ray diffractometry, laser Raman spectrometry, scanning electron microscopy, thermogravimetric (TG) analysis, and physisorption apparatus. The properties of PCB were compared with those of commercial carbon black (CCB) N326 and N339. Results showed PRs from waste tires were mainly composed of carbon, sulfur, and ash. The carbon in PCB was mainly from the CCB added during tire manufacture rather than from the pyrolysis of pure rubbers. The removal percentages for the ash and sulfur of PR are 98.33% (from 13.98 wt % down to 0.24 wt %) and 70.16% (from 1.81 wt % down to 0.54 wt %), respectively, in the entire process. The ash was mainly composed of metal oxides, sulfides, and silica. The surface properties, porosity, and morphology of the PCB were all close to those of N326. Therefore, PCB will be a potential alternative of N326 and reused in tire manufacture. This route successfully upgrades PR from waste tires to the high value-added CCB and greatly increases the overall efficiency of the waste tire pyrolysis industry.

Hydrophobic surface modification of FMSS and its application as effective sorbents for oil spill clean‐ups and recovery

AIChE Journal ◽  
2017 ◽  
Vol 63 (9) ◽  
pp. 4090-4102 ◽  
Author(s):  
Oluwasola Oribayo ◽  
Qinmin Pan ◽  
Xianshe Feng ◽  
Garry L. Rempel
Keyword(s):  
Surface Modification ◽  
Oil Spill ◽  
Hydrophobic Surface

scholarly journals Modified Lime Binders for Restoration Work

Buildings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 98
Author(s):  
Valentina Loganina ◽  
Kristina Sergeeva ◽  
Roman Fediuk ◽  
Sergey Klyuev ◽  
Nikolai Vatin ◽  
...  
Keyword(s):  
Storage Time ◽  
Infrared Spectrometry ◽  
X Ray Diffraction ◽  
X Ray ◽  
Gain Rate ◽  
Calcium Silicate Hydrates ◽  
Restoration Work ◽  
Weather Resistance ◽  
Kinetics Of ◽  
Mixing Water

Lime mixes are the primary material for restoration work in historic buildings. The research object of this study is modifying lime binders with specially synthesized calcium silicate hydrates (CSHs). This study aimed to improve lime render mixes’ weather resistance. The following factors were considered: the density of the liquid glass, the amount of the precipitating additive, the rate of introduction of the precipitating additive, the drying mode of the precipitate, and the storage time of the precipitate. The research methods were X-ray diffraction analysis, differential thermal analysis, Fourier transform infrared spectrometry, and optical and electron microscopy. It was revealed that lime compositions with CSH have a higher strength gain rate than the control compositions. A mathematical model of the kinetics of hardening a lime composite based on a binder filled with CSH was obtained. The regularities of the change in the lime composite’s strength depending on the filler grinding’s fineness, its content, and the amount of mixing water have been established. It was revealed that the introduction of CSH into the lime composition increases the weather resistance of facade lime mixtures by reducing the porosity and increasing the volume of closed pores of the composite.

Sign in / Sign up

Export Citation Format

Share Document