scholarly journals Chemical and Mineralogical Characterization of Recycled Aggregates from Construction and Demolition Waste from Mexico City

Minerals ◽  
2018 ◽  
Vol 8 (6) ◽  
pp. 237 ◽  
Author(s):  
Emiliano Moreno-Pérez ◽  
Juan Hernández-Ávila ◽  
Yamile Rangel-Martínez ◽  
Eduardo Cerecedo-Sáenz ◽  
Alberto Arenas-Flores ◽  
...  
Keyword(s):  
Mexico City ◽  
Construction And Demolition Waste ◽  
Recycled Aggregates ◽  
Demolition Waste ◽  
Mineralogical Characterization

scholarly journals Characterization and Possible Uses of Recycled Aggregates from Construcction and Demolition Waste from Mexico City

2018 ◽  
Author(s):  
Emiliano Moreno-Pérez ◽  
Juan Hernández-Ávila ◽  
Yamile Rangel- Martínez ◽  
Eduardo Cerecedo-Sáenz ◽  
Alberto Arenas-Flores ◽  
...  
Keyword(s):  
Mexico City ◽  
Cement Paste ◽  
Soil Stabilization ◽  
Great Influence ◽  
Mineralogical Composition ◽  
Construction And Demolition Waste ◽  
Recycled Aggregates ◽  
Sieve Analysis ◽  
Demolition Waste ◽  
Natural Aggregates

In this study, four samples of recycled aggregates from construction and demolition waste of Mexico City were characterized, in order to find innovative uses for this type of materials. Gravel and sand from a recycling plant were analyzed, as well as recycled aggregates in the laboratory from demolished concrete collected in landfills. The characterization was carried out by means of XRD, chemical microanalysis (EDS), pH measurement and sieve analysis. The results reveal that the minerals present in the analyzed materials are triclinic feldspars, cristobalite and pyroxene which correspond to the natural aggregates, as well as variable amounts of calcite, product of the carbonation of the cement paste adhered to these aggregates and in a smaller proportion calcium hemicarboaluminate, rosenhanite and tobermorite. It was determined that the quality (amount of cement) of the original concrete that was recycled, has great influence on the granulometry and the chemical-mineralogical composition of the aggregates, since there will be different quantities and qualities of cement paste adhered to the aggregates of according to size. Finally the pH values measured in all samples fluctuate between 10.15 and 12.08, therefore it is suggested that these materials can be used in soil stabilization.

scholarly journals Application of Construction and Demolition Waste in Civil Construction in the Brazilian Amazon—Case Study of the City of Rio Branco

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2247
Author(s):  
Fernando da Silva Souza ◽  
José Maria Franco de Carvalho ◽  
Gabriela Grotti Silveira ◽  
Vitória Cordeiro Araújo ◽  
Ricardo André Fiorotti Peixoto
Keyword(s):  
Mechanical Strength ◽  
Raw Materials ◽  
Amazon Region ◽  
Construction And Demolition Waste ◽  
Recycled Aggregates ◽  
Federal State ◽  
Construction Sites ◽  
Demolition Waste ◽  
Conventional Concrete ◽  
Initial Adhesion

The lack of usable aggregates for civil construction in Rio Branco (capital of Acre, a Federal State in the Amazon region) makes the production and use of recycled aggregates from construction and demolition waste (CDW) an alternative of great interest. In this study, a comprehensive characterization of CDW collected from 24 construction sites of six building types and three different construction phases (structures, masonry, and finishing) was carried out. The fine and coarse recycled aggregates were produced and evaluated in 10 different compositions. The aggregates’ performance was evaluated in four mixtures designed for laying and coating mortars with a total replacement of conventional aggregates and a mixture designed for a C25 concrete with 50% and 100% replacement of conventional aggregates. CDW mortars showed lower densities and greater water retention, initial adhesion, and mechanical strength than conventional mortars. CDW concretes presented lower densities and greater resistance to chloride penetration than conventional concrete, with a small mechanical strength reduction. The recycled CDW aggregates proved to be technologically feasible for safe application in mortars and concrete; for this reason, it is believed that the alternative and proposed methodology is of great interest to the Amazonian construction industry, considering the high costs of raw materials and the need for defining and consolidating a sustainable development model for the Amazon region.

Concrete Production of Hot Asphalt Using Recycled Aggregates CDW

2016 ◽  
Vol 881 ◽  
pp. 346-350 ◽  
Author(s):  
Luzana Leite Brasileiro ◽  
Fátima Maria de Souza Pereira ◽  
Pablo de Abreu Vieira ◽  
José Milton Elias de Matos
Keyword(s):  
Solid Waste ◽  
National Policy ◽  
Mechanical Tests ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Demolition Waste ◽  
Final Destination ◽  
Natural Aggregate ◽  
Concrete Production

Every year, there is a considerable increase in the exploitation of deposits to supply the market for aggregates. On the other hand, so does the production of solid waste from construction and demolition waste (CDW). In 2010 Brazil approved the PNRS (National Policy on Solid Waste), which sets out how the country should have their waste, encouraging recycling and sustainability. As an alternative to the above problem, this paper aims to investigate the feasibility of partial and total replacement of the asphalt concrete aggregates by recycled aggregates from CDW in order to reduce the environmental impacts caused by the operation of quarries and give an adequate final destination the residue produced by man in construction. Were carried out five (05) projects mixture of: the first (parameter of our research) used only natural aggregates (0% CDW) in the second, third and fourth replaced 25%, 50% and 75% respectively of natural aggregate by the recycled aggregate and the fifth and last, used only recycled aggregates (100% CDW). They carried out the characterization of the aggregates by means of physico-chemical and mechanical, analyzing them with reference based on specific standards paving. For mixtures, they calculated the volumetric parameters and performed mechanical tests of tensile strength and stability. The results indicate that the recycled aggregate, in a defined proportion, can replace the natural aggregate in the flexible pavements

scholarly journals Catalogue of Pavements with Recycled Aggregates from Construction and Demolition Waste

Proceedings ◽  
2018 ◽  
Vol 2 (20) ◽  
pp. 1282 ◽  
Author(s):  
Auxi Barbudo ◽  
José Ramón Jiménez ◽  
Jesús Ayuso ◽  
Adela Pérez Galvín ◽  
Francisco Agrela
Keyword(s):  
Point Of View ◽  
Construction And Demolition Waste ◽  
Recycled Aggregates ◽  
Demolition Waste ◽  
Technical Application ◽  
Technical Specifications ◽  
Lack Of Knowledge

Construction and Demolition Waste come from debris generated during construction, renovation and demolition of buildings, roads, and bridges. Recycling and reuse are essential in terms of sustainability, mainly from an environmental point of view. Although the recommendation of the use of these recycled aggregates is currently included in some technical specifications, its use is still not widespread due mainly to the lack of knowledge on their technical application. This work is a compilation of the recommendations proposed in the “Catalogue of road pavements with recycled aggregates”, supported by the construction of experimental stretches. It proposes different structural sections for road pavements by using recycled aggregates.

scholarly journals Effects of Recycled Aggregate Resin (RAR) in Concrete Material

2020 ◽  
Vol 11 (2) ◽  
Author(s):  
Sharifah Salwa Mohd Zuki ◽  
◽  
Shahiron Shahidan ◽  
Shivaraj Subramaniam ◽  
◽  
...  
Keyword(s):  
Epoxy Resin ◽  
Recycled Aggregate Concrete ◽  
Construction And Demolition Waste ◽  
Recycled Aggregate ◽  
Engineering Properties ◽  
Recycled Aggregates ◽  
Hardened Concrete ◽  
Demolition Waste ◽  
Split Tensile Strength ◽  
Close Proximity

This paper discussed the recycled aggregates produced from construction and demolition waste and their utilization in concrete construction. Along with a brief overview of the engineering properties of recycled aggregates, the paper also summarizes the effect and use of recycled aggregates on the properties of fresh and hardened concrete. The recycled aggregates were treated with epoxy resin to reduce the water absorptions with different percentages of resin such as 0%, 25%, 50%, 75%, and 100%. Epoxy resin is widely used in recent years owing to the enhancing of mechanical and durability of the concrete. This research also showed, recycled aggregate concrete are close proximity to normal concrete in terms of split tensile strength, compression strength and wet density. The low usage of resin was obtained good strength concrete compared to high percentage contained treated aggregates due to low bonding between material.

scholarly journals Comparative study of the influence of three types of fibre in the shrinkage of recycled mortar

2018 ◽  
Vol 68 (332) ◽  
pp. 168 ◽  
Author(s):  
P. Saiz-Martínez ◽  
D. Ferrández-Vega ◽  
C. Morón-Fernández ◽  
A. Payán de Tejada-Alonso
Keyword(s):  
Negative Impact ◽  
Polypropylene Fiber ◽  
Capacitive Sensor ◽  
Recycled Concrete ◽  
Construction And Demolition Waste ◽  
Moisture Loss ◽  
Recycled Aggregates ◽  
Fiber Types ◽  
Demolition Waste ◽  
Recycled Concrete Aggregates

Construction and demolition waste can be used as a substitution of natural aggregate in mortar and concrete elaboration. A poorer quality of recycled aggregates generally has negative impact on mortar properties. Shrinkage is one of the properties that experiences worse outcome due to the higher absorption of recycled aggregates. This research evaluates the potential shrinkage of mortars elaborated with recycled concrete aggregates both with and without fibres addition, as well as the relation between moisture loss and shrinkage caused by mortar drying process using a capacitive sensor of the authors’ own design. Two different mortar dosages 1:3 and 1:4 and three fiber types: polypropylene fiber, fiberglass and steel fiber, in different proportions were used. Obtained results show that the use of polypropylene fiber improves the recycled mortars performance against shrinkage in 0.2%. Moreover, a clear relation between dry shrinkage and moisture loss was observed.

Sign in / Sign up

Export Citation Format

Share Document