scholarly journals Initial Parallel Arrangement of Extracellular Fibrils Holds a Key for Sheath Frame Construction by Leptothrix sp. Strain OUMS1

Minerals ◽  
2013 ◽  
Vol 3 (1) ◽  
pp. 73-81 ◽  
Author(s):  
Hiromichi Ishihara ◽  
Tomoko Suzuki ◽  
Hideki Hashimoto ◽  
Hitoshi Kunoh ◽  
Jun Takada
Keyword(s):  
Parallel Arrangement ◽  
Frame Construction ◽  
Extracellular Fibrils

Comparison of the performance of oscillating water column devices based on arrangements of water columns

2020 ◽  
Vol 14 (3) ◽  
pp. 7082-7093
Author(s):  
Jahirwan Ut Jasron ◽  
Sudjito Soeparmani ◽  
Lilis Yuliati ◽  
Djarot B. Darmadi
Keyword(s):  
Wave Propagation ◽  
Water Column ◽  
Water Depth ◽  
Graphical Form ◽  
Wave Power ◽  
Oscillating Water Column ◽  
Power Absorption ◽  
Water Columns ◽  
Single Column ◽  
Parallel Arrangement

The hydrodynamic performance of oscillating water column (OWC) depends on the depth of the water, the size of the water column and its arrangement, which affects the oscillation of the water surface in the column. An experimental method was conducted by testing 4 water depths with wave periods of 1-3 s. All data recorded by the sensor is then processed and presented in graphical form. The research focused on analyzing the difference in wave power absorption capabilities of the three geometric types of OWC based on arrangements of water columns. The OWC devices designed as single water column, the double water column in a series arrangement which was perpendicular to the direction of wave propagation, and double water column in which the arrangement of columns was parallel to the direction of wave propagation. This paper discussed several factors affecting the amount of power absorbed by the device. The factors are the ratio of water depth in its relation to wavelength (kh) and the inlet openings ratio (c/h) of the devices. The test results show that if the water depth increases in the range of kh 0.7 to 0.9, then the performance of the double chamber oscillating water column (DCOWC) device is better than the single chamber oscillating water column (SCOWC) device with maximum efficiency for the parallel arrangement 22,4%, series arrangement 20.8% and single column 20.7%. However, when referring to c/h, the maximum energy absorption efficiency for a single column is 27.7%, double column series arrangement is 23.2%, and double column parallel arrangement is 29.5%. Based on the results of the analysis, DCOWC devices in parallel arrangement showed the ability to absorb better wave power in a broader range of wave frequencies. The best wave of power absorption in the three testing models occurred in the wave period T = 1.3 seconds.

CULVERT ON THE JOŠANICA RIVER (JOŠANIČKI POTOK)

2020 ◽  
Author(s):  
Biljana Buhavac
Keyword(s):  
Structural Design ◽  
Software Package ◽  
Concrete Structures ◽  
Line Model ◽  
Frame Construction

The bridge is one of the most important buildings used to overcome natural and artificial obstacles. The paper presents a constructed culvert (small bridge) on the river Jošanica, which was designed according to EN 1990 (Basics for structural design), EN 1991-1 (Structural loads) and EN 1991-2 (design of concrete structures). line model 2D (closed frame construction) calculated in the software package Tower 7. The paper approaches the modeling of structures and taking an adequate load. It would be necessary for further research to perform omission auscultations and examine the applicability of the applied methodology for modeling and calculation of the structure.

scholarly journals A Region of the Myosin Rod Important for Interaction With Paramyosin in Caenorhabditis elegans Striated Muscle

Genetics ◽  
2000 ◽  
Vol 156 (2) ◽  
pp. 631-643
Author(s):  
Pamela E Hoppe ◽  
Robert H Waterston
Keyword(s):  
Caenorhabditis Elegans ◽  
Heavy Chain ◽  
Molecular Interaction ◽  
Striated Muscle ◽  
Genetic Interaction ◽  
Specific Interaction ◽  
Thick Filament ◽  
Parallel Arrangement ◽  
Myosin Rod

Abstract The precise arrangement of molecules within the thick filament, as well as the mechanisms by which this arrangement is specified, remains unclear. In this article, we have exploited a unique genetic interaction between one isoform of myosin heavy chain (MHC) and paramyosin in Caenorhabditis elegans to probe the molecular interaction between MHC and paramyosin in vivo. Using chimeric myosin constructs, we have defined a 322-residue region of the MHC A rod critical for suppression of the structural and motility defects associated with the unc-15(e73) allele. Chimeric constructs lacking this region of MHC A either fail to suppress, or act as dominant enhancers of, the e73 phenotype. Although the 322-residue region is required for suppression activity, our data suggest that sequences along the length of the rod also play a role in the isoform-specific interaction between MHC A and paramyosin. Our genetic and cell biological analyses of construct behavior suggest that the 322-residue region of MHC A is important for thick filament stability. We present a model in which this region mediates an avid interaction between MHC A and paramyosin in parallel arrangement in formation of the filament arms.

scholarly journals Removal of Pb, Cu, Cd, and Zn Present in Aqueous Solution Using Coupled Electrocoagulation-Phytoremediation Treatment

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Francisco Ferniza-García ◽  
Araceli Amaya-Chávez ◽  
Gabriela Roa-Morales ◽  
Carlos E. Barrera-Díaz
Keyword(s):  
Aqueous Solution ◽  
Current Density ◽  
Batch Reactor ◽  
Operating Time ◽  
Typha Latifolia ◽  
Optimal Conditions ◽  
Lead And Zinc ◽  
Parallel Arrangement ◽  
Aluminum Electrodes ◽  
Cadmium Lead

This study presents the results of a coupled electrocoagulation-phytoremediation treatment for the reduction of copper, cadmium, lead, and zinc, present in aqueous solution. The electrocoagulation was carried out in a batch reactor using aluminum electrodes in parallel arrangement; the optimal conditions were current density of 8 mA/cm2 and operating time of 180 minutes. For phytoremediation the macrophytes, Typha latifolia L., were used during seven days of treatment. The results indicated that the coupled treatment reduced metal concentrations by 99.2% Cu, 81.3% Cd, and 99.4% Pb, while Zn increased due to the natural concentrations of the plant used.

A pilot project of area sampling frame for maize statistics: Indonesia’s experience1

2020 ◽  
Vol 36 (4) ◽  
pp. 997-1006
Author(s):  
Octavia Rizky Prasetyo ◽  
Kadir ◽  
Ratna Rizki Amalia
Keyword(s):  
Spatial Information ◽  
Food Policy ◽  
Pilot Project ◽  
Critical Issue ◽  
Sampling Frame ◽  
Area Estimation ◽  
Maize Cultivation ◽  
Area Sampling ◽  
Frame Construction ◽  
Different Sources

A critical issue in the context of food policy in Indonesia is the accuracy of crops statistics, particularly rice and maize. In 2018, Statistics Indonesia (BPS), in collaboration with the Indonesian Agency for Assessment and Application of Technology (BPPT), successfully implemented the area sampling frame (ASF) method to improve the accuracy of paddy harvested area estimation, which previously was estimated by conventional methods, mainly by the human eye (‘eye-estimate’). The achievement has encouraged BPS to replicate the method to estimate the harvested area of maize, for which there were indications it suffered from overestimation. In 2019, BPS initiated a pilot project on the implementation of the ASF for maize. One of the most challenging aspects in replicating the ASF method for maize is the frame construction. This issue arises due to insufficient spatial information on land that is specifically dedicated to maize cultivation. To address this challenge, BPS constructed the frame by making use of different sources of spatial information. This paper provides a comprehensive look at the development of the ASF for maize statistics. The discussion in this paper covers two main issues, namely the methodology applied and the business process of data collection.

Externally pressurized gas bearings in a mixed configuration

2002 ◽  
Vol 216 (2) ◽  
pp. 181-189
Author(s):  
A Cazan ◽  
R Gohar ◽  
M M A Safa
Keyword(s):  
Full Length ◽  
The Other ◽  
Gas Bearings ◽  
High Stiffness ◽  
Parallel Arrangement ◽  
Gas Bearing

This paper analyses the stabilityof an externally pressurized gas bearing (EPB) in a series-parallel arrangement. This mixed con. guration is an alternative to the rigidly mounted single bearing with no external damping, yielding, as one extreme, a high stiffness, but a low whirl threshold speed. The other extreme is a series bearing arrangement with a full-length externally pressurized sleeve between the journal and the housing, yielding a lower stiffness but a higher whirl threshold speed. The paper shows that a mixed con. guration allows for an increase in whirl threshold speed above that for an equivalent rigidly mounted single bearing but below that for a series arrangement. However, the mixed con. guration is stiffer than the series arrangement.

Lateral Load Performance of Panelized Wood I-Joist Floor Systems

2020 ◽  
Vol 70 (4) ◽  
pp. 428-438
Author(s):  
Sigong Zhang ◽  
Ying Hei Chui ◽  
David Joo
Keyword(s):  
Load Transfer ◽  
Mechanical Performance ◽  
Small Scale ◽  
Construction Time ◽  
Plane Shear ◽  
Floor Systems ◽  
Diaphragm Action ◽  
Wood Frame ◽  
Strength And Stiffness ◽  
Frame Construction

Abstract Panelized light wood frame construction is becoming more popular due to the faster construction time and shortage of onsite skilled labor. To use light wood frame panels effectively in panelized floor systems, panel-to-panel joints must be fastened adequately to allow load transfer between panels. They must also possess in-plane shear strength and stiffness comparable to stick-built, staggered-sheathed assemblies. This study was designed to develop efficient and effective panel-to-panel joints for connecting adjacent floor panels built with wood I-joists and evaluate the efficiency of the joints in achieving diaphragm action. At first, a number of these panel-to-panel joints were tested in the laboratory using a small-scale diaphragm test setup to determine their efficiency in transferring in-plane forces between panels. Test results showed that a small decrease in in-plane stiffness was expected for the most effective joints, but their strengths were significantly higher than at the same location in a conventional site-built floor diaphragm. The presence of blockings and use of two-row nailing were found to considerably improve stiffness and strength. These features can be used to mitigate the potential reduction in mechanical performance of panelized floor construction, in comparison with the site-built wood I-joist floor.

Conditioning of a culture substratum by the ectodermal layer promotes attachment and oriented locomotion by amphibian gastrula mesodermal cells

1983 ◽  
Vol 59 (1) ◽  
pp. 43-60 ◽  
Author(s):  
N. Nakatsuji ◽  
K.E. Johnson
Keyword(s):  
Cell Migration ◽  
Time Lapse ◽  
Ambystoma Maculatum ◽  
Specific Cell ◽  
Animal Pole ◽  
Micron Diameter ◽  
The Relationship ◽  
Extracellular Fibrils ◽  
Scanning Electron

We have found that ectodermal fragments of Ambystoma maculatum gastrulae deposit immense numbers of 0.1 micron diameter extracellular fibrils on plastic coverslips. When migrating mesodermal cells from A. maculatum gastrulae are seeded on such conditioned plastic substrata, they attach and begin migrating after 15–30 min in vitro. We did a detailed analysis of the relationship between fibril orientation and cell migration using time-lapse cinemicrography, scanning electron microscopy, and a microcomputer with a graphics tablet and morphometric program. We found that cells move in directions closely related to the orientation of fibrils. Usually fibrils are oriented in dense arrays with a predominance of fibrils running parallel to the blastopore-animal pole axis of the explant, and cells move preferentially along lines parallel to the blastopore-animal pole axis. When fibrils are unaligned, cells move at random. We have also shown that cells move with a slightly stronger tendency towards the animal pole direction. These results are discussed concerning the mechanism of specific cell migration during amphibian gastrulation.

Sign in / Sign up

Export Citation Format

Share Document