scholarly journals Different Insights into Silicate Rectorite Modification and Its Role in Removal of Heavy Metal Ions from Wastewater

Minerals ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 176 ◽  
Author(s):  
Ya Gao ◽  
Hao Jiang ◽  
Xianyuan Li ◽  
Sultan Ahmed Khoso ◽  
Guoyuan Xiang ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Adsorption Process ◽  
Underlying Mechanism ◽  
Xps Analysis ◽  
Adsorption Efficiency ◽  
Removal Capacity ◽  
Chloride Hexahydrate ◽  
Ferric Chloride Hexahydrate

In the field of water management, the separation of metal contaminants from wastewater is very important and challenging. This study systematically investigated the effect and underlying mechanism of silicate rectorite (REC) on the removal of heavy metal ions (Cr(VI) and Pb(II)) from wastewater. The adsorption and removal capacity of REC was further improved by its novel modification with ferric chloride hexahydrate. Compared to natural REC, the modified rectorite (Fe-REC) showed comparatively superior adsorption efficiency for both Cr(VI) and Pb(II) due to the chemisorption of Fe3+ on the REC surface as its oxidation state (Fe–O, Fe–OH, Fe–OOH). Adsorption on Cr(VI) attributed to the reaction between iron hydroxy complexes (FeOH2+, Fe(OH)2+ and Fe(OH)3(aq)) and Cr(VI) species (HCrO4− and CrO42−) in the aqueous solution. This reaction was perfectly consistent with the binding energy shifts in O 1s and Fe 2p species, as reflected by XPS analysis. While, the existence of –Al–OH and –Si–OH in silicate REC slurry reacted with PbOH+ colloids produced from lead ions hydrolysis to promote Pb(II) adsorption. Zeta potential after modification and removal occurred to shift positively or negatively to testify the adsorption of Fe3+ and heavy metal ions. Freundlich and Langmuir isotherms conformed adsorption process for Cr(VI) and Pb(II), respectively.

scholarly journals STUDI KINETIKA ADSORPSI ION Fe (III) MENGGUNAKAN LIMBAH AMPAS SAGU

2019 ◽  
Vol 9 (1) ◽  
pp. 9-17
Author(s):  
Batseba Taihuttu ◽  
V Kayadoe ◽  
A Mariwy
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Contact Time ◽  
Heavy Metal Ions ◽  
Adsorption Process ◽  
Second Order ◽  
Adsorption Efficiency ◽  
Adsorption Study ◽  
Pseudo Second Order

Adsorption study of the adsorption of heavy metal ions from Fe (III) using sago dregs waste was carried out. adsorption was carried out in batches, with the mass of adsorbent is 1 g and the concentration of Fe (III) ion is 10 ppm. in this study variations in contact time were 60, 90, 120, 150 and 180 minutes to determine the kinetic suitable for the adsorption process of ion Fe (III) and the capacity and efficiency of sago dregs adsorption. The results showed that the adsorption of ion fe (III) using sago dregs followed pseudo second-order kinetics with R2 values that were closer to 1 that is 0,9651. adsorption of ion Fe (III) at optimum contact time of 90 minutes with adsorbent mass of 1 g obtained by adsorption capacity 0,3211 mg/g and the adsorption efficiency is 64,2%.

scholarly journals Adsorption process and mechanism of heavy metal ions by different components of cells, using yeast (Pichia pastoris) and Cu2+ as biosorption models

RSC Advances ◽  
2021 ◽  
Vol 11 (28) ◽  
pp. 17080-17091
Author(s):  
Xinggang Chen ◽  
Zhuang Tian ◽  
Haina Cheng ◽  
Gang Xu ◽  
Hongbo Zhou
Keyword(s):  
Heavy Metal ◽  
Pichia Pastoris ◽  
Metal Ions ◽  
Cell Walls ◽  
Heavy Metal Ions ◽  
Adsorption Process ◽  
Yeast Pichia Pastoris ◽  
Adsorption Sites

The Cu2+ first bound to the outer mannan and finally entered the cytoplasm. During the whole adsorption process, the number of adsorption sites in the outer and middle cell walls was the largest, and then gradually decreased.

scholarly journals A systematic study for removal of heavy metals from aqueous media using Sorghum bicolor: an efficient biosorbent

2018 ◽  
Vol 77 (10) ◽  
pp. 2355-2368 ◽  
Author(s):  
Khalida Naseem ◽  
Zahoor H. Farooqi ◽  
Muhammad Z. Ur Rehman ◽  
Muhammad A. Ur Rehman ◽  
Robina Begum ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Aqueous Media ◽  
Review Article ◽  
Isotherm Models ◽  
Adsorption Efficiency ◽  
Adsorption Isotherm Models ◽  
Removal Of Heavy Metals

Abstract This review is based on the adsorption characteristics of sorghum (Sorghum bicolor) for removal of heavy metals from aqueous media. Different parameters like pH, temperature of the medium, sorghum concentration, sorghum particle size, contact time, stirring speed and heavy metal concentration control the adsorption efficiency of sorghum biomass for heavy metal ions. Sorghum biomass showed maximum efficiency for removal of heavy metal ions in the pH range of 5 to 6. It is an agricultural waste and is regarded as the cheapest biosorbent, having high adsorption capacity for heavy metals as compared to other reported adsorbents, for the treatment of heavy metal polluted wastewater. Adsorption of heavy metal ions onto sorghum biomass follows pseudo second order kinetics. Best fitted adsorption isotherm models for removal of heavy metal ions on sorghum biomass are Langmuir and Freundlich adsorption isotherm models. Thermodynamic aspects of heavy metal ions adsorption onto sorghum biomass have also been elaborated in this review article. How adsorption efficiency of sorghum biomass can be improved by different physical and chemical treatments in future has also been elaborated. This review article will be highly useful for researchers working in the field of water treatment via biosorption processing. The quantitative demonstrated efficiency of sorghum biomass for various heavy metal ions has also been highlighted in different sections of this review article.

scholarly journals Eco-Friendly Sustainable Fluorescent Carbon Dots for the Adsorption of Heavy Metal Ions in Aqueous Environment

Nanomaterials ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 315 ◽  
Author(s):  
Musa Yahaya Pudza ◽  
Zurina Zainal Abidin ◽  
Suraya Abdul Rashid ◽  
Faizah Md Yasin ◽  
A. S. M. Noor ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Carbon Dots ◽  
Heavy Metal Ions ◽  
Active Sites ◽  
Adsorption Process ◽  
Coefficient Of Determination ◽  
Aqueous Environment ◽  
Order Kinetic ◽  
Sensing Applications

The materials and substances required for sustainable water treatment by adsorption technique, are still being researched widely by distinguished classes of researchers. Thus, the need to synthesize substances that can effectively clean up pollutants from the environment cannot be overemphasized. So far, materials in bulk forms that are rich in carbon, such as biochar and varieties of activated carbon have been used for various adsorptive purposes. The use of bulk materials for such purposes are not efficient due to minimal surface areas available for adsorption. This study explores the adsorption task at nano dimension using carbon dots (CDs) from tapioca. The properties of carbon structure and its influence on the adsorptive efficacy of carbon nanoparticles were investigated by energy-dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), high resolution transmission electron microscopy (HrTEM), and atomic force microscopy (AFM). The results implied carbon present in CDs are good adsorbents for effective adsorption of heavy metal ions (lead) with removal efficiency of 80.6% in aqueous environment. The adsorption process as explored by both Langmuir and Freundlich isotherms have proven favorability of the adsorption process. Langmuir form two and three have correlation coefficients R2 at 0.9922 and 0.9912, respectively. The Freundlich isotherm confirms CDs as having defined surface heterogeneity and the exponential distribution of active sites. The adsorption of lead unto CDs obeyed the second order kinetic model with coefficient of determination, R2 of 0.9668 and 0.9996 at an initial lead concentration of 20 mg/L and 100 mg/L, respectively. The findings validated the efficiency of CDs derived from tapioca as an excellent material for further utilization in the environmental fields of wastewater pollution detection and clean up, bio-imaging, and chemical sensing applications.

Bioremediation of heavy metal contaminated aqueous solution by using red algae Porphyra leucosticta

2015 ◽  
Vol 72 (9) ◽  
pp. 1662-1666 ◽  
Author(s):  
Jianjun Ye ◽  
Henglin Xiao ◽  
Benlin Xiao ◽  
Weisheng Xu ◽  
Linxia Gao ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Red Algae ◽  
Contact Time ◽  
Heavy Metal Ions ◽  
Industrial Effluent ◽  
Optimal Conditions ◽  
Removal Capacity ◽  
Experimental Parameters ◽  
Biomass Dosage

Bioremediation is an effective process for the removal and recovery of heavy metal ions from aqueous solutions. In this study, red algae Porphyra leucosticta was examined to remove Cd(II) and Pb(II) ions from wastewater through biological enrichment and biological precipitation. The experimental parameters that affect the bioremediation process such as pH, contact time and biomass dosage were studied. The maximum bioremediation capacity of metal ions was 31.45 mg/g for Cd(II) and 36.63 mg/g for Pb(II) at biomass dosage 15 g/L, pH 8.0 and contact time 120 minutes containing initial 10.0 mg/L of Cd(II) and 10.0 mg/L of Pb(II) solution. Red algae Porphyra leucosticta biomass was efficient at removing metal ions of 10.0 mg/L of Cd(II) and 10.0 mg/L of Pb(II) solution with bioremediation efficiency of 70% for Cd(II) and 90% for Pb(II) in optimal conditions. At the same time, the removal capacity for real industrial effluent was gained at 75% for 7.6 mg/L Cd(II) and 95% for 8.9 mg/L Pb(II). In conclusion, it is demonstrated that red algae Porphyra leucosticta is a promising, efficient, cheap and biodegradable sorbent biomaterial for reducing heavy metal pollution in the environment and wastewater.

Functionalized hollow MnFe2O4 nanospheres: design, applications and mechanism for efficient adsorption of heavy metal ions

2019 ◽  
Vol 43 (15) ◽  
pp. 5879-5889 ◽  
Author(s):  
Chengzhao Jin ◽  
Guixiang Teng ◽  
Yinan Gu ◽  
Hao Cheng ◽  
ShaoPeng Fu ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Adsorption Capacity ◽  
Surface Activity ◽  
Heavy Metal Ions ◽  
Contaminated Water ◽  
High Porosity ◽  
Adsorption Efficiency ◽  
High Adsorption

A l-cysteine functionalized magnetic hollow MnFe2O4 nanosphere material has been synthesised, with high magnetism, large interior cavities, and high porosity and surface activity. It has high adsorption efficiency and regenerated adsorption capacity for the removal of Cr6+ and Pb2+ in contaminated water.

Adsorption of Pb2+, Cu2+ and Cr3+ on Yongnian Bentonite

2014 ◽  
Vol 1056 ◽  
pp. 16-19
Author(s):  
Shu Li Ding ◽  
Dan Dan Hou ◽  
Bo Hui Xu ◽  
Yu Zhuang Sun
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Constant Temperature ◽  
Langmuir Isotherm ◽  
Heavy Metal Ions ◽  
Adsorption Process ◽  
Isotherm Model ◽  
Adsorption Characteristics ◽  
Adsorption Capacities ◽  
Langmuir Isotherm Model

The Bentonite from Yongnian is Ca-Bentonite, Montmorillonite Content 52%, Colloidal Value 57ml/15g, Eca2+/CEC 53.60%. the Adsorption Characteristics of Pb2+, Cu2+ and Cr3+ onto Bentonite under Conditions of Constant Temperature and Ph have been Studied. the Results Show that the Adsorption Capacities of Heavy Metal Ions onto Bentonite from Yongnian Follow the Order of Pb2+> Cu2+> Cr3+. it is Found that the Adsorption Process of Bentonite Accords with the Langmuir Isotherm Model. the Maximum Adsorption of 3 Kinds of Metal Ions onto Bentonite is in Order of Cr3+>Cu2+>Pb2+.

Simultaneous removal of lead(II), chromium(III), and copper(II) heavy metal ions through an adsorption process using C-phenylcalix[4]pyrogallolarene material

2020 ◽  
Vol 8 (4) ◽  
pp. 103971 ◽  
Author(s):  
Jumina ◽  
Yoga Priastomo ◽  
Hamid Rohma Setiawan ◽  
Mutmainah ◽  
Yehezkiel Steven Kurniawan ◽  
...  
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Adsorption Process ◽  
Simultaneous Removal
Sign in / Sign up

Export Citation Format

Share Document