scholarly journals High-Precision and Low-Cost Wireless 16-Channel Measurement System for Malachite Green Detection

Micromachines ◽  
2018 ◽  
Vol 9 (12) ◽  
pp. 646 ◽  
Author(s):  
Tong Shen ◽  
Tong Zhou ◽  
Ying Wan ◽  
Yan Su
Keyword(s):  
Malachite Green ◽  
High Precision ◽  
Measurement System ◽  
Detection System ◽  
Low Cost ◽  
Test Methods ◽  
Low Noise ◽  
Measurement Capability ◽  
Aquatic Product ◽  
Maximum Measurement

Focusing on the issue of the malachite green traditional test methods such as large volume, high cost and high complex, this paper proposed a novel multi-channel electrochemical malachite green detection system. Specific recognition properties of malachite green DNA adapter is employed to realize accurate sensing of concentration of malachite green, which can achieve precise detection of malachite green concentration with low noise and high precision. The maximum measurement capability of multi-channel acquisition system is 16 samples in a batch. According to the experimental results, malachite green could be detected quantitatively in the range from 10−3 μg/mL to 10 μg/mL, which performs well in the test of malachite green residues in aquatic product transportation.

Temperature Cycle Measurement System Based on Single Chip Computer

2010 ◽  
Vol 428-429 ◽  
pp. 487-492
Author(s):  
Xi Yin ◽  
Xiao Jun Wang ◽  
Yong Que Xie
Keyword(s):  
High Precision ◽  
Measurement System ◽  
Low Cost ◽  
Temperature Cycle ◽  
Engineering Practice ◽  
Lead Wire ◽  
Single Chip ◽  
Piecewise Linearization ◽  
Single Chip Computer ◽  
Precision Temperature

This thesis introduces a low cost and high precision temperature cycle measurement system with adoption of PT100 as temperature sensor, with single chip computer as the core. The method of sub-three-wire connection is proposed for engineering practice, then, can eliminate the effects of lead wire resistance and simplify the external cable connection. We discuss and research circuit component selection, circuit design, improving system reliability, and a software method of piecewise linearization process is adopted, thus we ensure exact and reliable measure and the system characteristic of low cost and high precision.

Design of Automatic Measurement System of Lithium Battery Electrochemical Impedance Spectroscopy Based on Microcomputer

2012 ◽  
Vol 241-244 ◽  
pp. 259-264 ◽  
Author(s):  
Wang Li ◽  
Gen Wang Liu ◽  
Fu He Yang
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Impedance Spectroscopy ◽  
High Precision ◽  
Measurement System ◽  
Lithium Battery ◽  
Electrochemical Impedance ◽  
Low Cost ◽  
Automatic Measurement ◽  
Response Curves ◽  
High Level

A system of miniaturized lithium battery electrochemical impedance spectroscopy (EIS) measurement is designed with high precision impedance converter chip AD5933 as its core. The measurement range of the system is from 0.010Hz to 100 KHz. Meanwhile, by using a high-level programming language of C#, an interface is developed which can real-time graphic display of EIS information. Through measurement and analysis of two types of impedance, the results show that detection precision of the system is less than 3.5%. Finally, amplitude-frequency response curves and Nyquist plots of HL-18650 M lithium battery at different state of charge (SOC) levels are measured. Compared with lithium battery EIS measurement system by traditional division, this system has the outstanding advantages of small size, high level of integration, low cost, simple operation and high precision. It is helpful to the mass production and application of lithium battery EIS measurement system.

scholarly journals High-Precision Acceleration Measurement System Based on Tunnel Magneto-Resistance Effect

Sensors ◽  
2020 ◽  
Vol 20 (4) ◽  
pp. 1117 ◽  
Author(s):  
Lu Gao ◽  
Fang Chen ◽  
Yingfei Yao ◽  
Dacheng Xu
Keyword(s):  
Magnetic Field ◽  
High Precision ◽  
Measurement System ◽  
Frequency Modulation ◽  
High Frequency ◽  
Low Noise ◽  
Acceleration Measurement ◽  
Field Source ◽  
Modulation Technique ◽  
Magneto Resistance

A high-precision acceleration measurement system based on an ultra-sensitive tunnel magneto-resistance (TMR) sensor is presented in this paper. A “force–magnetic–electric” coupling structure that converts an input acceleration into a change in magnetic field around the TMR sensor is designed. In such a structure, a micro-cantilever is integrated with a magnetic field source on its tip. Under an acceleration, the mechanical displacement of the cantilever causes a change in the spatial magnetic field sensed by the TMR sensor. The TMR sensor is constructed with a Wheatstone bridge structure to achieve an enhanced sensitivity. Meanwhile, a low-noise differential circuit is developed for the proposed system to further improve the precision of the measured acceleration. The experimental results show that the micro-system achieves a measurement resolution of 19 μg/√Hz at 1 Hz, a scale factor of 191 mV/g within a range of ± 2 g, and a bias instability of 38 μg (Allan variance). The noise sources of the proposed system are thoroughly investigated, which shows that low-frequency 1/f noise is the dominant noise source. We propose to use a high-frequency modulation technique to suppress the 1/f noise effectively. Measurement results show that the 1/f noise is suppressed about 8.6-fold at 1 Hz and the proposed system resolution can be improved to 2.2 μg/√Hz theoretically with this high-frequency modulation technique.

The Study of Luminous Flux Method for Rapid Measurement of Micro-Aperture Area

2013 ◽  
Vol 321-324 ◽  
pp. 671-675
Author(s):  
Ming Ye ◽  
Dong Jing Xu ◽  
Zhi Qiang Ni
Keyword(s):  
High Precision ◽  
Measurement System ◽  
Low Cost ◽  
Luminous Flux ◽  
Measurement Methods ◽  
Previous Measurement ◽  
Test Results ◽  
Measuring Head ◽  
Flux Method ◽  
Rapid Measurement

This paper presents a new method for micro-aperture measurement based on luminous flux. The principle and the structure of micro-aperture measurement system are introduced in detail. Compared with previous measurement methods, the proposed method has several advantages: The measuring head with array line structure can measure several apertures’ area directly at the same time. The shape of the aperture is not limited to a circle or any other shape. It is a measuring technique with high precision and low cost. The test results show that the uncertainty is mm of a circular 0.5 mm diameter aperture, and the average linearity value is 3.47% to the aperture which diameter in the range from 150 to 500um.

NanoMagSat, a 16U nanosatellite constellation high-precision magnetic project to initiate permanent low-cost monitoring of the Earth’s magnetic field and ionospheric environment

2021 ◽  
Author(s):  
Gauthier Hulot ◽  
Jean-Michel Léger ◽  
Lasse B. N. Clausen ◽  
Florian Deconinck ◽  
Pierdavide Coïsson ◽  
...  
Keyword(s):  
High Precision ◽  
Geomagnetic Field ◽  
Low Cost ◽  
Low Noise ◽  
Low Earth Orbit ◽  
Dual Frequency ◽  
Observatory Data ◽  
Vector Magnetometer ◽  
Gnss Receivers ◽  
Global Coverage

<p>The geomagnetic field has been continuously monitored from low-Earth orbit (LEO) since 1999, complementing ground-based observatory data by providing calibrated scalar and vector measurements with global coverage. The successful three-satellite ESA Swarm constellation is expected to remain in operation up to at least 2025. Further monitoring the field from space with high-precision absolute magnetometry beyond that date is of critical importance for improving our understanding of dynamics of the multiple components of this field, as well as that of the ionospheric environment. Here, we will report on the latest status of the NanoMagSat project, which aims to deploy and operate a new constellation concept of three identical 16U nanosatellites, using two inclined (approximately 60°) and one polar LEO, as well as an innovative payload including an advanced Miniaturized Absolute scalar and self-calibrated vector Magnetometer (MAM) combined with a set of precise star trackers (STR), a compact High-frequency Field Magnetometer (HFM, sharing subsystems with the MAM), a multi-needle Langmuir Probe (m-NLP) and dual frequency GNSS receivers. The data to be produced will at least include 1 Hz absolutely calibrated and oriented magnetic vector field (using the MAM and STR), 2 kHz very low noise magnetic scalar (using the MAM) and vector (using the HFM) field, 2 kHz local electron density (using the m-NLP) as well as precise timing, location and TEC products. In addition to briefly presenting the nanosatellite and constellation concepts, as well as the evolving programmatic status of the mission (which already underwent a consolidation study funded by the ESA Scout programme), this presentation will illustrate through a number of E2E simulations the ability of NanoMagSat to complement and improve on many of the science goals of the Swarm mission at a much lower cost, and to bring innovative science capabilities for ionospheric investigations. NanoMagSat could form the basis of a permanent collaborative constellation of nanosatellites for low-cost long-term monitoring of the geomagnetic field and ionospheric environment from space.</p>

scholarly journals High-Precision Low-Cost Gimballing Platform for Long-Range Railway Obstacle Detection

Sensors ◽  
2022 ◽  
Vol 22 (2) ◽  
pp. 474
Author(s):  
Elio Hajj Assaf ◽  
Cornelius von von Einem ◽  
Cesar Cadena ◽  
Roland Siegwart ◽  
Florian Tschopp
Keyword(s):  
Long Range ◽  
High Precision ◽  
High Speed ◽  
Detection System ◽  
Low Cost ◽  
Obstacle Detection ◽  
Numerical Control ◽  
Railway Network ◽  
Lever System ◽  
Novel Approach

Increasing demand for rail transportation results transportation by rail, resulting in denser and more high-speed usage of the existing railway network, making makes new and more advanced vehicle safety systems necessary. Furthermore, high traveling speeds and the greatlarge weights of trains lead to long braking distances—all of which necessitates Long braking distances, due to high travelling speeds and the massive weight of trains, necessitate a Long-Range Obstacle Detection (LROD) system, capable of detecting humans and other objects more than 1000 m in advance. According to current research, only a few sensor modalities are capable of reaching this far and recording sufficiently accurate enoughdata to distinguish individual objects. The limitation of these sensors, such as a 1D-Light Detection and Ranging (LiDAR), is however a very narrow Field of View (FoV), making it necessary to use ahigh-precision means of orienting to target them at possible areas of interest. To close this research gap, this paper presents a novel approach to detecting railway obstacles by developinga high-precision pointing mechanism, for the use in a future novel railway obstacle detection system In this work such a high-precision pointing mechanism is developed, capable of targeting aiming a 1D-LiDAR at humans or objects at the required distance. This approach addresses To address the challenges of a low target pricelimited budget, restricted access to high-precision machinery and equipment as well as unique requirements of our target application., a novel pointing mechanism has been designed and developed. By combining established elements from 3D printers and Computer Numerical Control (CNC) machines with a double-hinged lever system, simple and cheaplow-cost components are capable of precisely orienting an arbitrary sensor platform. The system’s actual pointing accuracy has been evaluated using a controlled, in-door, long-range experiment. The device was able to demonstrate a precision of 6.179 mdeg, which is at the limit of the measurable precision of the designed experiment.

Design of a simple, low cost, high precision multi-channel ion beam current and fluence measurement system for a low energy accelerator

2018 ◽  
Vol 13 (05) ◽  
pp. T05011-T05011 ◽  
Author(s):  
K. Suresh ◽  
J. Navas ◽  
K. Saravanan ◽  
C. David ◽  
B.K. Panigrahi
Keyword(s):  
High Precision ◽  
Measurement System ◽  
Low Cost ◽  
Ion Beam ◽  
Beam Current ◽  
Low Energy

scholarly journals A low-cost and high-precision scanning electrochemical microscope built with open source tools

2019 ◽  
Author(s):  
Alperen Guver ◽  
Nafetalai Fifita ◽  
Peker Milas ◽  
Michael Straker ◽  
Michael Guy ◽  
...  
Keyword(s):  
Open Source ◽  
High Precision ◽  
High Performance ◽  
Low Cost ◽  
Measurement Capability ◽  
Scanning Electrochemical Microscope ◽  
Inverted Microscope ◽  
Stepper Motors ◽  
3D Printed ◽  
Software And Hardware

AbstractA low-cost Scanning Electrochemical Microscope (SECM) was built with a 0.6 pA current measurement capability potentiostat and submicron resolution motorized stage, using open source software and hardware tools. The high performance potentiostat with a Python graphical user interface was built based on an open source project. Arduino boards, stepper motors, a manual XY micromanipulator stage, 3D printed couplers and gears were used in building the motorized stage. An open source motor control software was used for moving the motorized stage with high precision. An inverted microscope was utilized for viewing a standard microelectrode while scanning. The setup was tested in the formation of a map of electrochemical signals from an array of pores on a parafilm membrane. As the setup will be used in future biosensing experiments, DNA hybridization detection experiments were also performed with the setup.

Sign in / Sign up

Export Citation Format

Share Document