scholarly journals Editorial for the Special Issue on Nanofabrication with Focused Electron/Ion Beam Induced Processing

Micromachines ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 893
Author(s):  
Rosa Córdoba
Keyword(s):  
Electron Beam ◽  
Material Science ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Science Research ◽  
Special Issue ◽  
Material Science Research

Focused electron beam (FEB) and focused ion beam (FIB) technologies have opened novel paths for material science research and technology at the micro and nano scales in recent decades [...]

Fin Level Defect Isolation Inside a FinFET Using Electron Beam Alteration of Current Flow

2017 ◽  
Author(s):  
H.J. Ryu ◽  
A.B. Shah ◽  
Y. Wang ◽  
W.-H. Chuang ◽  
T. Tong
Keyword(s):  
Electron Microscopy ◽  
Electron Beam ◽  
Focused Ion Beam ◽  
Current Flow ◽  
Ion Beam ◽  
The Body ◽  
Complete Understanding ◽  
Root Cause ◽  
Transmission Electron ◽  
Defect Isolation

Abstract When failure analysis is performed on a circuit composed of FinFETs, the degree of defect isolation, in some cases, requires isolation to the fin level inside the problematic FinFET for complete understanding of root cause. This work shows successful application of electron beam alteration of current flow combined with nanoprobing for precise isolation of a defect down to fin level. To understand the mechanism of the leakage, transmission electron microscopy (TEM) slice was made along the leaky drain contact (perpendicular to fin direction) by focused ion beam thinning and lift-out. TEM image shows contact and fin. Stacking fault was found in the body of the silicon fin highlighted by the technique described in this paper.

Carbon Coating for Electron Beam Testing and Focus Ion Beam Reconfiguration

1996 ◽  
Author(s):  
P. Perdu ◽  
G. Perez ◽  
M. Dupire ◽  
B. Benteo
Keyword(s):  
Electron Beam ◽  
Sample Preparation ◽  
Carbon Coating ◽  
Focused Ion Beam ◽  
Sacrificial Layer ◽  
Ion Beam ◽  
Electrical Characterization ◽  
Fault Analysis ◽  
Voltage Contrast ◽  
The Right

Abstract To debug ASIC we likely use accurate tools such as an electron beam tester (Ebeam tester) and a Focused Ion Beam (FIB). Interactions between ions or electrons and the target device build charge up on its upper glassivation layer. This charge up could trigger several problems. With Ebeam testing, it sharply decreases voltage contrast during Image Fault Analysis and hide static voltage contrast. During ASIC reconfiguration with FIB, it could induce damages in the glassivation layer. Sample preparation is getting a key issue and we show how we can deal with it by optimizing carbon coating of the devices. Coating is done by an evaporator. For focused ion beam reconfiguration, we need a very thick coating. Otherwise the coating could be sputtered away due to imaging. This coating is use either to avoid charge-up on glassivated devices or as a sacrificial layer to avoid short circuits on unglassivated devices. For electron beam Testing, we need a very thin coating, we are now using an electrical characterization method with an insitu control system to obtain the right thin thickness. Carbon coating is a very cheap and useful method for sample preparation. It needs to be tuned according to the tool used.

scholarly journals Comparative study of plasmonic antennas fabricated by electron beam and focused ion beam lithography

2018 ◽  
Vol 8 (1) ◽  
Author(s):  
Michal Horák ◽  
Kristýna Bukvišová ◽  
Vojtěch Švarc ◽  
Jiří Jaskowiec ◽  
Vlastimil Křápek ◽  
...  
Keyword(s):  
Electron Beam ◽  
Comparative Study ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Ion Beam Lithography

scholarly journals The Relationships of Microscopic Evolution to Resistivity Variation of a FIB-Deposited Platinum Interconnector

Micromachines ◽  
2020 ◽  
Vol 11 (6) ◽  
pp. 588
Author(s):  
Chaorong Zhong ◽  
Ruijuan Qi ◽  
Yonghui Zheng ◽  
Yan Cheng ◽  
Wenxiong Song ◽  
...  
Keyword(s):  
Electron Beam ◽  
Focused Ion Beam ◽  
Spherical Aberration ◽  
Ion Beam ◽  
Electrical Contact ◽  
Heating Process ◽  
Comprehensive Understanding ◽  
Irreversible Damage ◽  
Resistivity Variation

Depositing platinum (Pt) interconnectors during the sample preparation process via a focused ion beam (FIB) system is an inescapable procedure for in situ transmission electron microscopy (TEM) investigations. To achieve good electrical contact and avoid irreversible damage in practical samples, the microscopic evolution mechanism of FIB-deposited Pt interconnectors need a more comprehensive understanding, though it is known that its resistivity could be affected by thermal annealing. In this work, an electron-beam FIB-deposited Pt interconnector was studied by advanced spherical aberration (Cs)-corrected TEM combined with an in situ heating and biasing system to clarify the relationship of microscopic evolution to resistivity variation. During the heating process, the Pt interconnector underwent crystallization, organic matter decomposition, Pt nanocrystal growth, grain connection, and conductive path formation, which are combined actions to cause several orders of magnitude of resistivity reduction. The comprehensive understanding of the microscopic evolution of FIB-deposited Pt material is beneficial, not only for optimizing the resistance performance of Pt as an interconnector, but also for understanding the role of C impurities with metal materials. For the purpose of wiring, annealed electron-beam (EB)-deposited Pt material can be recommended for use as an interconnector in devices for research purposes.

A comparison of focused ion beam and electron beam induced deposition processes

1996 ◽  
Vol 36 (11-12) ◽  
pp. 1779-1782 ◽  
Author(s):  
S. Lipp ◽  
L. Frey ◽  
C. Lehrer ◽  
E. Demm ◽  
S. Pauthner ◽  
...  
Keyword(s):  
Electron Beam ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Electron Beam Induced Deposition ◽  
Deposition Processes
Sign in / Sign up

Export Citation Format

Share Document