scholarly journals A Nanosensor Based on a Metal-Insulator-Metal Bus Waveguide with a Stub Coupled with a Racetrack Ring Resonator

Micromachines ◽  
2021 ◽  
Vol 12 (5) ◽  
pp. 495
Author(s):  
Haoran Shi ◽  
Shubin Yan ◽  
Xiaoyu Yang ◽  
Xiushan Wu ◽  
Wenchang Wu ◽  
...  
Keyword(s):  
Figure Of Merit ◽  
Ring Resonator ◽  
Electromagnetically Induced Transparency ◽  
Spectral Characteristics ◽  
The Finite Element Method ◽  
Metal Insulator ◽  
Sensing Applications ◽  
Metal Insulator Metal ◽  
Induced Transparency ◽  
Sensing Performance

A nanostructure comprising the metal-insulator-metal (MIM) bus waveguide with a stub coupled with a racetrack ring resonator is designed. The spectral characteristics of the proposed structure are analyzed via the finite element method (FEM). The results show that there is a sharp Fano resonance profile and electromagnetically induced transparency (EIT)-like effect, which are excited by a coupling between the MIM bus waveguide with a stub and the racetrack ring resonator. The normalized HZ field is affected by the displacement of the ring from the stub x greatly. The influence of the geometric parameters of the sensor design on the sensing performance is discussed. The sensitivity of the proposed structure can reach 1774 nm/RIU with a figure of merit of 61. The proposed structure has potential in nanophotonic sensing applications.

scholarly journals Enhancing the sensitivity of a standard plasmonic MIM square ring resonator by incorporating the Nano-dots in the cavity

2020 ◽  
Vol 12 (1) ◽  
pp. 1 ◽  
Author(s):  
Muhammad Ali ALI Butt ◽  
Nikolay Kazanskiy
Keyword(s):  
Refractive Index ◽  
Fano Resonance ◽  
Ring Resonator ◽  
Plasmonic Waveguide ◽  
Metal Insulator ◽  
Refractive Index Sensing ◽  
Sensing Applications ◽  
Resonator Design ◽  
Metal Insulator Metal ◽  
Mim Waveguide

We studied the metal-insulator-metal square ring resonator design incorporated with nano-dots that serve to squeeze the surface plasmon wave in the cavity of the ring. The E-field enhances at the boundaries of the nano-dots providing a strong interaction of light with the surrounding medium. As a result, the sensitivity of the resonator is highly enhanced compared to the standard ring resonator design. The best sensitivity of 907 nm/RIU is obtained by placing seven nano-dots of radius 4 nm in all four sides of the ring with a period (ᴧ)= 3r. The proposed design will find applications in biomedical science as highly refractive index sensors. Full Text: PDF References:Z. Han, S. I. Bozhevolnyi. "Radiation guiding with surface plasmon polaritons", Rep. Prog. Phys. 76, 016402 (2013). [CrossRef]N.L. Kazanskiy, S.N. Khonina, M.A. Butt. "Plasmonic sensors based on Metal-insulator-metal waveguides for refractive index sensing applications: A brief review", Physica E 117, 113798 (2020). [CrossRef]D.K. Gramotnev, S.I. Bozhevolnyi. "Plasmonics beyond the diffraction limit", Nat. Photonics 4, 83 (2010). [CrossRef]A.N.Taheri, H. Kaatuzian. "Design and simulation of a nanoscale electro-plasmonic 1 × 2 switch based on asymmetric metal–insulator–metal stub filters", Applied Optics 53, 28 (2014). [CrossRef]P. Neutens, L. Lagae, G. Borghs, P. V. Dorpe. "Plasmon filters and resonators in metal-insulator-metal waveguides", Optics Express 20, 4 (2012). [CrossRef]M.A. Butt, S.N. Khonina, N. L. Kazanskiy. "Metal-insulator-metal nano square ring resonator for gas sensing applications", Waves in Random and complex media [CrossRef]M.A.Butt, S.N.Khonina, N.L.Kazanskiy. "Hybrid plasmonic waveguide-assisted Metal–Insulator–Metal ring resonator for refractive index sensing", Journal of Modern Optics 65, 1135 (2018). [CrossRef]M.A.Butt, S.N. Khonina, N.L. Kazanskiy, "Highly sensitive refractive index sensor based on hybrid plasmonic waveguide microring resonator", Waves in Random and complex media [CrossRef]Y. Fang, M. Sun. "Nanoplasmonic waveguides: towards applications in integrated nanophotonic circuits", Light:Science & Applications 4, e294 (2015). [CrossRef]H. Lu, G.X. Wang, X.M. Liu. "Manipulation of light in MIM plasmonic waveguide systems", Chin Sci Bull [CrossRef]J.N. Anker et al. "Biosensing with plasmonic nanosensors", Nature Materials 7, 442 (2008). [CrossRef]M.A.Butt, S.N. Khonina, N.L. Kazanskiy. Journal of Modern Optics 66, 1038 (2019).[CrossRef]Z.-D. Zhang, H.-Y. Wang, Z.-Y. Zhang. "Fano Resonance in a Gear-Shaped Nanocavity of the Metal–Insulator–Metal Waveguide", Plasmonics 8,797 (2013) [CrossRef]Y. Yu, J. Si, Y. Ning, M. Sun, X. Deng. Opt. Lett. 42, 187 (2017) [CrossRef]B.H.Zhang, L-L. Wang, H-J. Li et al. "Two kinds of double Fano resonances induced by an asymmetric MIM waveguide structure", J. Opt. 18,065001 (2016) [CrossRef]X. Zhao, Z. Zhang, S. Yan. "Tunable Fano Resonance in Asymmetric MIM Waveguide Structure", Sensors 17, 1494 (2017) [CrossRef]J. Zhou et al. "Transmission and refractive index sensing based on Fano resonance in MIM waveguide-coupled trapezoid cavity", AIP Advances 7, 015020 (2017) [CrossRef]V. Perumal, U. Hashim. "Advances in biosensors: Principle, architecture and applications", J. Appl. Biomed. 12, 1 (2014)[CrossRef]H.Gai, J. Wang , Q. Tian, "Modified Debye model parameters of metals applicable for broadband calculations", Appl. Opt. 46 (12), 2229 (2007) [CrossRef]

The sensing characteristics based on electromagnetically-induced transparency-like response in double-sided stub and a nanodisk waveguide system

2017 ◽  
Vol 31 (10) ◽  
pp. 1750101 ◽  
Author(s):  
Shaofang Pang ◽  
Yiping Huo ◽  
Limei Hao ◽  
Kaigang Sun ◽  
Yang-Junjie Wang ◽  
...  
Keyword(s):  
High Performance ◽  
Electromagnetically Induced Transparency ◽  
High Sensitivity ◽  
Waveguide Structure ◽  
The Finite Element Method ◽  
Metal Insulator Metal ◽  
Waveguide System ◽  
Induced Transparency ◽  
Mim Waveguide ◽  
Sensing Characteristics

We propose a novel metal–insulator–metal (MIM) waveguide structure consisting of a stub and a double side-coupled nanodisk. Its electromagnetically-induced transparency (EIT)-like response and transmission properties are numerically investigated by the finite element method (FEM). Numerical simulation results show that the EIT-like phenomenon appears in the transmission spectra. The transparency window can not only be manipulated by changing the radius of the nanodisk and the height of the stub, but also appear redshifted with the increasing of the refractive index n. Furthermore, the MIM waveguide structure is easy to yield a high sensitivity of 1200 nm/RIU with a figure of merit about [Formula: see text], which may be applied to nanosensors. These results would help us design the high-performance plasmonic devices based on the EIT-like response.

scholarly journals A Nanoscale Structure Based on an MIM Waveguide Coupled with a Q Resonator for Monitoring Trace Element Concentration in the Human Body

Micromachines ◽  
2021 ◽  
Vol 12 (11) ◽  
pp. 1384
Author(s):  
Tingsong Li ◽  
Shubin Yan ◽  
Pengwei Liu ◽  
Xiaoyu Zhang ◽  
Yi Zhang ◽  
...  
Keyword(s):  
Human Body ◽  
Figure Of Merit ◽  
Refractive Index Sensor ◽  
The Finite Element Method ◽  
Transmission Characteristics ◽  
Metal Insulator Metal ◽  
Potential Applications ◽  
Internal Mechanism ◽  
Nanoscale Structure ◽  
Mim Waveguide

In this study, a nano-refractive index sensor is designed that consists of a metal–insulator–metal (MIM) waveguide with a stub-1 and an orthogon ring resonator (ORR) with a stub-2. The finite element method (FEM) was used to analyze the transmission characteristics of the system. We studied the cause and internal mechanism of Fano resonance, and optimized the transmission characteristics by changing various parameters of the structure. In our experimental data, the suitable sensitivity could reach 2260 nm/RIU with a figure of merit of 211.42. Furthermore, we studied the detection of the concentration of trace elements (such as Na+) of the structure in the human body, and its sensitivity reached 0.505 nm/mgdL−1. The structure may have other potential applications in sensors.

Sign in / Sign up

Export Citation Format

Share Document