scholarly journals On-chip MIC by Combining Concentration Gradient Generator and Flanged Chamber Arrays

Micromachines ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 207 ◽  
Author(s):  
Xiao-Yan Zhang ◽  
Zhe-Yu Li ◽  
Kose Ueno ◽  
Hiroaki Misawa ◽  
Nan-Qi Ren ◽  
...  
Keyword(s):  
Bacterial Growth ◽  
Concentration Gradient ◽  
Microfluidic System ◽  
Honeycomb Structure ◽  
Inhibition Test ◽  
Microfluidic Platform ◽  
Initial Concentration ◽  
Bacteria Growth ◽  
Skilled Operator ◽  
On Chip

Minimum inhibition concentration (MIC) of antibiotic is an effective value to ascertain the agent and minimum dosage of inhibiting bacterial growth. However, current techniques to determine MIC are labor intensive and time-consuming, and require skilled operator and high initial concentration of bacteria. To simplify the operation and reduce the time of inhibition test, we developed a microfluidic system, containing a concentration generator and sub-micro-liter chambers, for rapid bacterial growth and inhibition test. To improve the mixing effect, a micropillar array in honeycomb-structure channels is designed, so the steady concentration gradient of amoxicillin can be generated. The flanged chambers are used to culture bacteria under the condition of continuous flow and the medium of chambers is refreshed constantly, which could supply the sufficient nutrient for bacteria growth and take away the metabolite. Based on the microfluidic platform, the bacterial growth with antibiotic inhibition on chip can be quantitatively measured and MIC can be obtained within six hours using low initial concentration of bacteria. Overall, this microfluidic platform has the potential to provide rapidness and effectiveness to screen bacteria and determine MIC of corresponding antibiotics in clinical therapies.

A novel microfluidic platform with stable concentration gradient for on chip cell culture and screening assays

Lab on a Chip ◽  
2013 ◽  
Vol 13 (18) ◽  
pp. 3714 ◽  
Author(s):  
Bi-Yi Xu ◽  
Shan-Wen Hu ◽  
Guang-Sheng Qian ◽  
Jing-Juan Xu ◽  
Hong-Yuan Chen
Keyword(s):  
Cell Culture ◽  
Concentration Gradient ◽  
Microfluidic Platform ◽  
Screening Assays ◽  
On Chip

scholarly journals Design and Manufacturing of a Disposable, Cyclo-Olefin Copolymer, Microfluidic Device for a Biosensor †

Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1178 ◽  
Author(s):  
Jorge Prada ◽  
Christina Cordes ◽  
Carsten Harms ◽  
Walter Lang
Keyword(s):  
Microfluidic Device ◽  
Heating Temperature ◽  
Low Cost ◽  
Reaction Chamber ◽  
Microfluidic System ◽  
Heating Process ◽  
Design And Manufacturing ◽  
On Chip ◽  
Working Parameters ◽  
Auto Fluorescence

This contribution outlines the design and manufacturing of a microfluidic device implemented as a biosensor for retrieval and detection of bacteria RNA. The device is fully made of Cyclo-Olefin Copolymer (COC), which features low auto-fluorescence, biocompatibility and manufacturability by hot-embossing. The RNA retrieval was carried on after bacteria heat-lysis by an on-chip micro-heater, whose function was characterized at different working parameters. Carbon resistive temperature sensors were tested, characterized and printed on the biochip sealing film to monitor the heating process. Off-chip and on-chip processed RNA were hybridized with capture probes on the reaction chamber surface and identification was achieved by detection of fluorescence tags. The application of the mentioned techniques and materials proved to allow the development of low-cost, disposable albeit multi-functional microfluidic system, performing heating, temperature sensing and chemical reaction processes in the same device. By proving its effectiveness, this device contributes a reference to show the integration potential of fully thermoplastic devices in biosensor systems.

Closed-loop feedback control of microfluidic cell manipulation via deep-learning integrated sensor networks

Lab on a Chip ◽  
2021 ◽  
Author(s):  
Ningquan Wang ◽  
Ruxiu Liu ◽  
Norh Asmare ◽  
Chia-Heng Chu ◽  
Ozgun Civelekoglu ◽  
...  
Keyword(s):  
Deep Learning ◽  
Sensor Networks ◽  
Feedback Control ◽  
Closed Loop ◽  
Microfluidic System ◽  
Cell Manipulation ◽  
Integrated Sensor ◽  
Loop Feedback ◽  
Closed Loop Feedback ◽  
On Chip

An adaptive microfluidic system changing its operational state in real-time based on cell measurements through an on-chip electrical sensor network.

scholarly journals Silicon-Quartz Microcapillary Opto-Fluidic Platform Obtained by CMOS-Compatible Die to Wafer 200 mm Dual Bonding Process

Proceedings ◽  
2018 ◽  
Vol 2 (13) ◽  
pp. 1018
Author(s):  
Giuseppe Fiorentino ◽  
Ben Jones ◽  
Sophie Roth ◽  
Edith Grac ◽  
Murali Jayapala ◽  
...  
Keyword(s):  
Adhesive Bonding ◽  
System Analysis ◽  
Quartz Substrate ◽  
Microfluidic System ◽  
Bonding Process ◽  
Microfluidic Channels ◽  
Fully Integrated ◽  
Lab On Chip ◽  
Human Blood Cells ◽  
On Chip

A composite, capillary-driven microfluidic system suitable for transmitted light microscopy of cells (e.g., red and white human blood cells) is fabricated and demonstrated. The microfluidic system consists of a microchannels network fabricated in a photo-patternable adhesive polymer on a quartz substrate, which, by means of adhesive bonding, is then connected to a silicon microfluidic die (for processing of the biological sample) and quartz die (to form the imaging chamber). The entire bonding process makes use of a very low temperature budget (200 °C). In this demonstrator, the silicon die consists of microfluidic channels with transition structures to allow conveyance of fluid utilizing capillary forces from the polymer channels to the silicon channels and back to the polymer channels. Compared to existing devices, this fully integrated platform combines on the same substrate silicon microfluidic capabilities with optical system analysis, representing a portable and versatile lab-on-chip device.

scholarly journals Fructose Enhanced Reduction of Bacterial Growth on Nanorough Surfaces

2013 ◽  
Vol 1498 ◽  
pp. 73-78 ◽  
Author(s):  
N. Gozde Durmus ◽  
Erik N. Taylor ◽  
Kim M. Kummer ◽  
Thomas J. Webster
Keyword(s):  
Bacterial Growth ◽  
Biofilm Formation ◽  
Antibacterial Agents ◽  
Bacteria Growth ◽  
Planktonic Bacteria ◽  
Combined Use ◽  
Wide Range ◽  
Metabolic Stimulation ◽  
Antibacterial Surfaces ◽  
First Time

ABSTRACTBiofilms are a major source of medical device-associated infections, due to their persistent growth and antibiotic resistance. Recent studies have shown that engineering surface nanoroughness has great potential to create antibacterial surfaces. In addition, stimulation of bacterial metabolism increases the efficacy of antibacterial agents to eradicate biofilms. In this study, we combined the antibacterial effects of nanorough topographies with metabolic stimulation (i.e., fructose metabolites) to further decrease bacterial growth on polyvinyl chloride (PVC) surfaces, without using antibiotics. We showed for the first time that the presence of fructose on nanorough PVC surfaces decreased planktonic bacteria growth and biofilm formation after 24 hours. Most importantly, a 60% decrease was observed on nanorough PVC surfaces soaked in a 10 mM fructose solution compared to conventional PVC surfaces. In this manner, this study demonstrated that bacteria growth can be significantly decreased through the combined use of fructose and nanorough surfaces and thus should be further studied for a wide range of antibacterial applications.

An automated centrifugal microfluidic assay for whole blood fractionation and isolation of multiple cell populations using an aqueous two-phase system

Lab on a Chip ◽  
2021 ◽  
Author(s):  
Byeong-Ui Moon ◽  
Liviu Clime ◽  
Daniel Brassard ◽  
Alex Boutin ◽  
Jamal Daoud ◽  
...  
Keyword(s):  
Human Blood ◽  
Whole Blood ◽  
Cell Populations ◽  
Phase System ◽  
Two Phase ◽  
Microfluidic Platform ◽  
Aqueous Two Phase System ◽  
Separation Layers ◽  
Multiple Cell ◽  
On Chip

This paper describes an advanced on-chip whole human blood fractionation and cell isolation process combining an aqueous two-phase system to create complex separation layers with a centrifugal microfluidic platform to control and automate the assay.

INTEGRATED 3D MULTI-PHYSICAL SIMULATION OF A MICROFLUIDIC SYSTEM USING FINITE ELEMENT ANALYSIS

2015 ◽  
Vol 15 (06) ◽  
pp. 1540043 ◽  
Author(s):  
HAO SUN ◽  
ZHANDONG LI ◽  
JIANGUO TAO
Keyword(s):  
Finite Element ◽  
Physical Simulation ◽  
Microfluidic System ◽  
Von Mises Stress ◽  
Biomedical Science ◽  
Heating Zone ◽  
Element Analysis ◽  
Theoretical Understanding ◽  
Velocity Magnitude ◽  
On Chip

Microfluidics technology has emerged as an attractive approach in physics, chemistry and biomedical science by providing increased analytical accuracy, sensitivity and efficiency in minimized systems. Numerical simulation can improve theoretical understanding, reduce prototyping consumption, and speed up development. In this paper, we setup a 3D model of an integrated microfluidic system and study the multi-physical dynamics of the system via the finite element method (FEM). The fluid–structure interaction (FSI) of fluid and an immobilized single cell within the cell trapping component, and the on-chip thermodynamics have been analyzed. The velocity magnitude and streamline of flow field, the distribution of von Mises stress and Tresca stress on the FSI interface have been studied. In addition, the on-chip heat transfer performance and temperature distribution in the heating zone have been evaluated and analyzed respectively. The presented approach is capable of optimizing microfluidic design, and revealing the complicated mechanism of multi-physical fields. Therefore, it holds the potential for improving microfluidics application in fundamental research and clinical settings.

Sign in / Sign up

Export Citation Format

Share Document