scholarly journals Improvement of Strength and Impact Toughness for Cold-Worked Austenitic Stainless Steels Using a Surface-Cracking Technique

Metals ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 932 ◽  
Author(s):  
Kwangyoon Kim ◽  
Minha Park ◽  
Jaeho Jang ◽  
Hyoung Kim ◽  
Hyoung-Seok Moon ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Impact Toughness ◽  
Stainless Steels ◽  
Low Temperatures ◽  
Austenitic Stainless Steels ◽  
High Strength ◽  
Surface Cracks ◽  
Surface Cracking ◽  
Cold Worked ◽  
The Impact

For cryogenic applications, materials must be cautiously selected because of a drastic degradation in the mechanical properties of materials when they are exposed to very low temperatures. We have developed a new technique using a cold-working and surface-cracking process to overcome such degradation of mechanical properties at low temperatures. This technique intentionally induced surface-cracks in cold-worked austenitic stainless steels and resulted in a significant increase in both strength and fracture at low temperatures. According to the microstructure observations, dissipation of the crack propagation energy with surface-cracks enhanced the impact toughness, showing a ductile fracture mode in even the cryogenic temperature region. In particular, we obtained the high strength and toughness materials by a surface-cracking technique at 5% cold-worked specimen with surface-cracks.

scholarly journals Effect of Neutron Irradiation on the Mechanical Properties, Swelling and Creep of Austenitic Stainless Steels

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2622
Author(s):  
Malcolm Griffiths
Keyword(s):  
Mechanical Properties ◽  
Stainless Steels ◽  
Dimensional Stability ◽  
Operating Experience ◽  
Austenitic Stainless Steels ◽  
High Strength ◽  
Gas Production ◽  
Rate Theory ◽  
Fast Reactors ◽  
Internal Structures

Austenitic stainless steels are used for core internal structures in sodium-cooled fast reactors (SFRs) and light-water reactors (LWRs) because of their high strength and retained toughness after irradiation (up to 80 dpa in LWRs), unlike ferritic steels that are embrittled at low doses (<1 dpa). For fast reactors, operating temperatures vary from 400 to 550 °C for the internal structures and up to 650 °C for the fuel cladding. The internal structures of the LWRs operate at temperatures between approximately 270 and 320 °C although some parts can be hotter (more than 400 °C) because of localised nuclear heating. The ongoing operability relies on being able to understand and predict how the mechanical properties and dimensional stability change over extended periods of operation. Test reactor irradiations and power reactor operating experience over more than 50 years has resulted in the accumulation of a large amount of data from which one can assess the effects of irradiation on the properties of austenitic stainless steels. The effect of irradiation on the intrinsic mechanical properties (strength, ductility, toughness, etc.) and dimensional stability derived from in- and out-reactor (post-irradiation) measurements and tests will be described and discussed. The main observations will be assessed using radiation damage and gas production models. Rate theory models will be used to show how the microstructural changes during irradiation affect mechanical properties and dimensional stability.

Physical Simulation of Weldability of Weldox 1300 Steel

2013 ◽  
Vol 762 ◽  
pp. 551-555 ◽  
Author(s):  
Marek Stanislaw Węglowski ◽  
Marian Zeman ◽  
Miroslaw Lomozik
Keyword(s):  
Mechanical Properties ◽  
Impact Toughness ◽  
Physical Simulation ◽  
High Strength ◽  
Parent Material ◽  
Cooling Time ◽  
Electron Microscopies ◽  
Transmission Electron ◽  
Transformation Diagrams ◽  
The Impact

In the present study, the investigation of weldability of new ultra-high strength - Weldox 1300 steel has been presented. The thermal simulated samples were used to investigate the effect of welding cooling time t8/5 on the microstructure and mechanical properties of the heat affected zone (HAZ). In the frame of these investigation the microstructure was studied by the light (LM) and transmission electron microscopies (TEM). It has been shown that the microstructure of the Weldox 1300 steel is composed of tempered martensite, and inside the laths the minor precipitations mainly V(CN) and molybdenum carbide Mo2C were observed. Mechanical properties of parent material were analysed by the tensile, impact and hardness tests. In details the influence of cooling time in the range of 2,5 - 300 s. on hardness, impact toughness and microstructure of simulated HAZ was studied by using welding thermal simulation test. The results show that the impact toughness and hardness decrease with the increase of t8/5 under the condition of a single thermal cycle in simulated HAZ. The continuous cooling transformation diagrams (CCT-W for welding conditions) of Weldox 1300 steel for welding purposes was also elaborated. The steel Weldox 1300 for cooling time in the range of 2,5 - 4 s showed martensite microstructure, for time from 4 s to 60 s mixture of martensite and bainite, and for longer cooling time mixture of ferrite, bainite and martensite. The results indicated that the weldability of Weldox 1300 steel is limited and to avoid the cold cracking the preheating procedure or medium net linear heat input should be used.

Effect of Tempering Temperature on Mechanical Properties of High Strength Wear Resistant Cast Steel

2013 ◽  
Vol 791-793 ◽  
pp. 440-443
Author(s):  
Hong Bo Li ◽  
Jing Wang ◽  
Han Chi Cheng ◽  
Chun Jie Li ◽  
Xing Jun Su
Keyword(s):  
Mechanical Properties ◽  
Impact Toughness ◽  
Cast Steel ◽  
High Strength ◽  
Fracture Morphology ◽  
Temperature Quenching ◽  
Tempering Temperature ◽  
Wear Resistant ◽  
Dimple Fracture ◽  
The Impact

This paper mainly studied the high temperature quenching oil quenching, tempering temperature on the influence of high strength steel mechanical properties of wear resistant. The results show that high strength and toughness wear-resistant cast steel with 880°C× 30min after oil quenching, the hardness of 38.6HRC steel, the impact toughness value reaches 40.18J/cm2. After 200°C, 400°C and 600°C tempering, with the increase of the tempering temperature, the hardness decreased linearly, as by 600°C tempering, the hardness has been reduced to 22.3HRC. Impact toughness with the tempering temperature, the overall upward trend, the impact toughness of some reduced at 400°C, the highest impact toughness value reaches 113.34J/cm2. From the fracture morphology can be seen, with the increase of tempering temperature, ductile fracture increased, by 600°C tempering is dimple fracture, obviously can not see the traces of brittle fracture.

Application of Physical Simulation for Developing New Steel Types

2008 ◽  
Vol 575-578 ◽  
pp. 1002-1007 ◽  
Author(s):  
L. Pentti Karjalainen ◽  
Mahesh C. Somani ◽  
Atef S. Hamada
Keyword(s):  
Mechanical Properties ◽  
Stainless Steels ◽  
Physical Simulation ◽  
Austenitic Stainless Steels ◽  
High Strength ◽  
Carbon Steels ◽  
Austenitic Steels ◽  
Low Carbon ◽  
Modelling Studies ◽  
Electron Microscopes

Processing of a large number of novel steel types, such as DP, TRIP, CP and TWIP, and high-strength low-carbon bainitic and martensitic DQ-T steels, have been developed based on physical simulation and modelling studies. Among stainless steels, guidelines for processing of ultra-fine grained austenitic stainless steels have been created. Physical simulation has been used by employing a Gleeble thermo-mechanical simulator to reveal the phenomena occurring in the hot rolling stage (the flow resistance, recrystallization kinetics and microstructure evolution), and in the cooling stage (CCT diagrams) for carbon steels and in short-term annealing of cold rolled metastable austenitic steels. Connecting these data with microstructures examined in optical and electron microscopes and resultant mechanical properties have improved the understanding on complex phenomena occurring in the processing of these steels and the role of numerous process variables in the optimization of enhanced mechanical properties.

EFFECT OF BORON ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF HOT-ROLLED Nb-ADDED HSLA H-SECTION STEEL

2009 ◽  
Vol 23 (06n07) ◽  
pp. 1885-1890 ◽  
Author(s):  
ZUOCHENG WANG ◽  
GUOTAO CUI ◽  
TAO SUN ◽  
WEIMIN GUO ◽  
XIULING ZHAO ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Impact Toughness ◽  
Charpy Impact ◽  
High Strength ◽  
Charpy Impact Test ◽  
Uniaxial Tensile ◽  
Uniaxial Tensile Test ◽  
Boron Addition ◽  
Low Temperature Impact Toughness ◽  
The Impact

In our research, boron was added into the Nb -added high strength low alloy (HSLA) H -section steels. The contents of boron added were 4ppm, 8ppm and 11ppm, respectively. The mechanical properties of H -section steels with/without boron were examined by using uniaxial tensile test and Charpy impact test ( V -notch). The morphologies of the microstructure and the fracture surfaces of the impact specimens were observed by metalloscope, stereomicroscope and electron probe. The experimental results indicate that boron gives a significant increase in impact toughness, especially in low temperature impact toughness, though it leads to an unremarkable increase in strength and plasticity. For instance, the absorbed energy at -40°C reaches up to 126J from 15J by 8ppm boron addition, and the ductile-brittle transition temperature declines by 20°C. It is shown that boron has a beneficial effect on grain refinement. The fracture mechanism is transited from cleavage fracture to dimple fracture due to boron addition.

scholarly journals Study on the effect of ferrite number on impact toughness of austenitic stainless steels at low temperatures

2020 ◽  
Vol 7 (10) ◽  
pp. 102-111
Author(s):  
André de Albuquerque Vicente ◽  
Peter Aloysius D'silva ◽  
Bobby Jos ◽  
Tiago Felipe de Abreu Santos ◽  
Jorge Alberto Soares Tenório
Keyword(s):  
Impact Toughness ◽  
Stainless Steels ◽  
Low Temperatures ◽  
Austenitic Stainless Steels ◽  
Ferrite Number

Selection of Metal Electrodes for and Effect of Welding Treatment on Hardness and Microstructure of Some Type of Austenitic Stainless Steels

2009 ◽  
Author(s):  
M. M. Ibrahim ◽  
H. G. Mohamed ◽  
Y. E. Tawfik
Keyword(s):  
Mechanical Properties ◽  
Stainless Steels ◽  
Pressure Vessel ◽  
Nuclear Power ◽  
Plate Thickness ◽  
Austenitic Stainless Steels ◽  
High Strength ◽  
Aisi 304L ◽  
Stress Relieving ◽  
Selection Of

Austenitic stainless steels have been the focus of considerable research recently because of their high strength, good ductility, excellent corrosion resistance and a reasonable weldability. These properties make austenitic stainless steels attractive candidate materials for use in the fabrication of piping systems, automotive exhaust gas systems and in a variety of equipment associated with the chemical and nuclear power industries. PWHT is a stress relieving process whereby residual stresses are reduced by typically heating to 550–650 °C for a set time depending upon plate thickness. The effect of PWHT on mechanical properties such as hardness, ultimate tensile strength, yield strength, impact energy and ductile to brittle transition temperature are of great concern to the pressure vessel industry and pressure vessel codes. This paper reports on the effect of multiple PWHT on hardness and microstructure of austenitic stainless steels. The 6 mm AISI 304L, 316L, and 347 austenitic stainless steels were used for this work. This welds were produced by SMAW and GTAW techniques using a single vee preparation and multiple weld beads, and welded by various types of consumables. Selection of a suitable consumables metals for joining those weldment sample joints are an important criterion in view of the differences in physical, chemical, and mechanical properties of the base materials involved.

scholarly journals The Effects of Recrystallization on Strength and Impact Toughness of Cold-Worked High-Mn Austenitic Steels

Metals ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 948 ◽  
Author(s):  
Minha Park ◽  
Moon Seok Kang ◽  
Geon-Woo Park ◽  
Eun Young Choi ◽  
Hyoung-Chan Kim ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Impact Toughness ◽  
Cold Working ◽  
Charpy Impact ◽  
Austenitic Steels ◽  
Recrystallization Process ◽  
Rolled Specimen ◽  
Cold Worked ◽  
Hot Rolled ◽  
The Impact

High-Mn austenitic steels have been recently developed for a storage or transportation application of liquefied natural gas (LNG) in cryogenic fields. Since the structural materials are subjected to extremely low temperature, it requires excellent mechanical properties such as high toughness strength. In case of high-Mn steels, twinning deformation during the cold-working process is known to increase strength yet may cause embrittlement of heavy deformed twin and anisotropic properties. In this study, a recrystallization process through appropriate annealing heat treatments after cold-working was applied to improve the impact toughness for high-Mn austenitic steels. Microstructure and mechanical properties were performed to evaluate the influence of cold-worked and annealed high-Mn austenitic steels. Mechanical properties, such as strength and impact toughness, were investigated by tensile and Charpy impact tests. The relationship between strength and impact toughness was determined by microstructure analysis such as the degree of recrystallization and grain refinement. Consequently, both elongation and toughness were significantly increased after cold-working and subsequent annealing at 1000 °C as compared to the as-received (hot-rolled) specimen. The cold-worked high-Mn steel was completely recrystallized at 1000 °C and showed a homogeneous micro-structure with high-angle grain boundaries.

Sign in / Sign up

Export Citation Format

Share Document