scholarly journals The Influence of an Integration Time Step on Dynamic Calculation of a Vehicle-Track-Bridge under High-Speed Railway

Mathematics ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 431
Author(s):  
Junjie Ye ◽  
Hao Sun
Keyword(s):  
High Speed ◽  
Coupled Model ◽  
Short Wave ◽  
Integration Time ◽  
Vertical Acceleration ◽  
Dynamic Calculation ◽  
Time Step ◽  
High Speed Railway ◽  
Track Irregularity ◽  
Track Bridge

In order to study the influence of an integration time step on dynamic calculation of a vehicle-track-bridge under high-speed railway, a vehicle-track-bridge (VTB) coupled model is established. The influence of the integration time step on calculation accuracy and calculation stability under different speeds or different track regularity states is studied. The influence of the track irregularity on the integration time step is further analyzed by using the spectral characteristic of sensitive wavelength. According to the results, the disparity among the effect of the integration time step on the calculation accuracy of the VTB coupled model at different speeds is very small. Higher speed requires a smaller integration time step to keep the calculation results stable. The effect of the integration time step on the calculation stability of the maximum vertical acceleration of each component at different speeds is somewhat different, and the mechanism of the effect of the integration time step on the calculation stability of the vehicle-track-bridge coupled system is that corresponding displacement at the integration time step is different. The calculation deviation of the maximum vertical acceleration of the car body, wheel-sets and bridge under the track short wave irregularity state are greatly increased compared with that without track irregularity. The maximum vertical acceleration of wheel-sets, rails, track slabs and the bridge under the track short wave irregularity state all show a significant declining trend. The larger the vibration frequency is, the smaller the range of integration time step is for dynamic calculation.

Stochastic Transverse Earthquake-Induced Damage Track Irregularity Spectrum Considering the Uncertainty of Track-Bridge System

2021 ◽  
pp. 2140004
Author(s):  
Yulin Feng ◽  
Yu Hou ◽  
Lizhong Jiang ◽  
Wangbao Zhou ◽  
Jian Yu ◽  
...  
Keyword(s):  
Simulation Model ◽  
Traffic Safety ◽  
High Speed ◽  
Residual Deformation ◽  
High Speed Railway ◽  
Marquardt Algorithm ◽  
Earthquake Action ◽  
Track Irregularity ◽  
Track Bridge ◽  
Bridge System

The track irregularity spectrum of longitudinally connected ballastless track (LCBT)-bridge systems of high-speed railway was proposed in this paper. First, a simulation model of an LCBT-continuous girder bridge was established by considering the influences of approach bridges and subgrade with track structure. Further, a large number of sample analyses were carried out by taking into account the uncertainty of LCBT-bridge systems and stochastic behaviors of ground motions based on the simulation model. The damage laws of residual deformation of track-bridge system after earthquake actions were studied. Then, an interlayer deformation coordination relationship (IDCR) considering the track irregularity caused by earthquake-induced damage of bearings was developed, and the superposed track irregularity samples were obtained. Finally, by using the improved Blackman–Turkey method and Levenberg–Marquardt algorithm, the LCBT irregularity spectrum, track irregularity spectrogram, track irregularity limit spectrum, and a fitting formula for the track irregularity spectrum on a bridge after the action of earthquakes were obtained. Results obtained from the fitting formula and IDCR were compared, and they indicated that tracks undergone significant high-frequency irregularity diseases after the earthquake action. It was found that the track irregularity spectrum could be roughly divided into three ranges: high-, medium- and low-frequency wavebands. Consequently, this led to an application of a three-segment power function for the fitting of the track irregularity spectrum after the earthquake action. The track irregularity spectrum after the action of earthquakes provides an important theoretical basis for the establishment of seismic design methods for high-speed railway bridges based on the traffic safety performance.

scholarly journals Effect of Bridge-Pier Differential Settlement on the Dynamic Response of a High-Speed Railway Train-Track-Bridge System

2017 ◽  
Vol 2017 ◽  
pp. 1-13 ◽  
Author(s):  
Xiaohui Zhang ◽  
Yao Shan ◽  
Xinwen Yang
Keyword(s):  
Dynamic Response ◽  
High Speed ◽  
Tensile Force ◽  
Differential Settlement ◽  
Bridge Pier ◽  
Vertical Acceleration ◽  
Train Track ◽  
Allowable Limit ◽  
High Speed Railway ◽  
Track Bridge

A model based on the theory of train-track-bridge coupling dynamics is built in the article to investigate how high-speed railway bridge pier differential settlement can affect various railway performance-related criteria. The performance of the model compares favorably with that of a 3D finite element model and train-track-bridge numerical model. The analysis of the study demonstrates that all the dynamic response for a span of 24 m is slightly larger than that for a span of 32 m. The wheel unloading rate increases with pier differential settlement for all of the calculation conditions considered, and its maximum value of 0.695 is well below the allowable limit. Meanwhile, the vertical acceleration increases with pier differential settlement and train speed, respectively, and the values for a pier differential settlement of 10 mm and speed of 350 km/h exceed the maximum allowable limit stipulated in the Chinese standards. On this basis, a speed limit for the exceeding pier differential settlement is determined for comfort consideration. Fasteners that had an initial tensile force due to pier differential settlement experience both compressive and tensile forces as the train passes through and are likely to have a lower service life than those which solely experience compressive forces.

Mapping relationship between dynamic responses of high-speed trains and additional bridge deformations

2020 ◽  
pp. 107754632093689
Author(s):  
Hongye Gou ◽  
Chang Liu ◽  
Hui Hua ◽  
Yi Bao ◽  
Qianhui Pu
Keyword(s):  
High Speed ◽  
Coupled Model ◽  
Dynamic Responses ◽  
High Speed Railway ◽  
Railway Bridges ◽  
Running Safety ◽  
High Speed Trains ◽  
Track Bridge ◽  
The Relationship ◽  
Track Deformation

Deformations of high-speed railways accumulate over time and affect the geometry of the track, thus affecting the running safety of trains. This article proposes a new method to map the relationship between dynamic responses of high-speed trains and additional bridge deformations. A train–track–bridge coupled model is established to determine relationship between the dynamic responses (e.g. accelerations and wheel–rail forces) of the high-speed trains and the track deformations caused by bridge pier settlement, girder end rotation, and girder camber. The dynamic responses are correlated with the track deformation. The mapping relationship between bridge deformations and running safety of trains is determined. To satisfy the requirements of safety and riding comfort, the suggested upper thresholds of pier settlement, girder end rotation, and girder camber are 22.6 mm, 0.92‰ rad, and 17.2 mm, respectively. This study provides a method that is convenient for engineers in evaluation and maintenance of high-speed railway bridges.

scholarly journals The Seismic Response of High-Speed Railway Bridges Subjected to Near-Fault Forward Directivity Ground Motions Using a Vehicle-Track-Bridge Element

2014 ◽  
Vol 2014 ◽  
pp. 1-17 ◽  
Author(s):  
Chen Ling-kun ◽  
Jiang Li-zhong ◽  
Guo Wei ◽  
Liu Wen-shuo ◽  
Zeng Zhi-ping ◽  
...  
Keyword(s):  
High Speed ◽  
Ground Motions ◽  
Element Model ◽  
Railway Vehicle ◽  
Vertical Acceleration ◽  
High Speed Railway ◽  
Near Fault ◽  
Pulse Effect ◽  
Short Period ◽  
Track Bridge

Based on the Next Generation Attenuation (NGA) project ground motion library, the finite element model of the high-speed railway vehicle-bridge system is established. The model was specifically developed for such system that is subjected to near-fault ground motions. In addition, it accounted for the influence of the rail irregularities. The vehicle-track-bridge (VTB) element is presented to simulate the interaction between train and bridge, in which a train can be modeled as a series of sprung masses concentrated at the axle positions. For the short period railway bridge, the results from the case study demonstrate that directivity pulse effect tends to increase the seismic responses of the bridge compared with far-fault ground motions or nonpulse-like motions and the directivity pulse effect and high values of the vertical acceleration component can notably influence the hysteretic behaviour of piers.

Non-Stationary Random Vibration Analysis of Railway Bridges Under Moving Heavy-Haul Trains

2018 ◽  
Vol 18 (03) ◽  
pp. 1850035 ◽  
Author(s):  
Zhihui Zhu ◽  
Lidong Wang ◽  
Zhiwu Yu ◽  
Wei Gong ◽  
Yu Bai
Keyword(s):  
Random Vibration ◽  
Vertical Acceleration ◽  
Railway Bridges ◽  
Coupling System ◽  
Ballasted Track ◽  
Heavy Haul ◽  
Train Speed ◽  
Track Irregularity ◽  
Heavy Haul Trains ◽  
Track Bridge

This paper presents a non-stationary random vibration analysis of railway bridges under moving heavy-haul trains by the pseudo-excitation method (PEM) considering the train-track-bridge coupling dynamics. The train and the ballasted track-bridge are modeled by the multibody dynamics and finite element (FE) method, respectively. Based on the linearized wheel-rail interaction model, the equations of motion of the train-ballasted track-bridge coupling system are then derived. Meanwhile, the excitations between the rails and wheels caused by the random track irregularity are transformed into a series of deterministic pseudo-harmonic excitation vectors by the PEM. Then, the random vibration responses of the coupling system are obtained using a step-by-step integration method and the maximum responses are estimated using the 3[Formula: see text] rule for the Gaussian stochastic process. The proposed method is validated by the field measurement data collected from a simply-supported girder bridge (SSB) for heavy-haul trains in China. Finally, the effects of train speed, grade of track irregularity, and train type on the random dynamic behavior of six girder bridges for heavy-haul railways are investigated. The results show that the vertical acceleration and dynamic amplification factor (DAF) of the midspan of the SSB girders are influenced significantly by the train speed and track irregularity. With the increase in the vehicle axle-load, the vertical deflection-to-span ratio ([Formula: see text]) of the girders increases approximately linearly, but the DAF and vertical acceleration fail to show clear trend.

Nonlinear random seismic analysis of 3D high-speed railway track-bridge system based on OpenSEES

Structures ◽  
2020 ◽  
Vol 24 ◽  
pp. 87-98
Author(s):  
Haiyan Li ◽  
Zhiwu Yu ◽  
Jianfeng Mao ◽  
Lizhong Jiang
Keyword(s):  
High Speed ◽  
Seismic Analysis ◽  
Railway Track ◽  
High Speed Railway ◽  
Track Bridge ◽  
Bridge System

scholarly journals Numerical Analysis of Vibration Responses in High-Speed Railways considering Mud Pumping Defect

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Ting Li ◽  
Qian Su ◽  
Kang Shao ◽  
Jie Liu
Keyword(s):  
High Speed ◽  
Coupled Model ◽  
Test Results ◽  
External Excitation ◽  
Slab Track ◽  
Vibration Responses ◽  
Track Irregularity ◽  
Mud Pumping ◽  
Element Theory ◽  
Good Agreement

As a newly appeared defect under slab tracks in high-speed railways, mud pumping weakens the support ability of the subgrade to slab track, bringing about deviations on the vibration responses of the vehicle, slab track, and subgrade. Therefore, this paper proposes a vehicle-slab track-subgrade coupled model based on the multibody simulation principle and the finite element theory to highlight the influences of mud pumping defect. As an external excitation to this model, random track irregularity is considered. In order to simulate the mud pumping defect, the contact between the concrete base and subgrade is described as a spring-damper system. This model is validated by field test results and other simulation results, and a very good agreement is found. The vibration responses of the vehicle, slab track, and subgrade under different mud pumping lengths and train speeds are studied firstly. The deviations of vibration responses in high-speed railways induced by mud pumping are then obtained, and the limited mud pumping length is put forward finally to provide a recommendation for maintenance works of high-speed railways in practice.

scholarly journals Improvement and In-Situ Application of an Evaluation Method of Ballasted-Track Condition Using Digital 2-D Image Analysis

2020 ◽  
Vol 10 (21) ◽  
pp. 7946
Author(s):  
Bongsik Park ◽  
Yeong-Tae Choi ◽  
Hyunmin Kim
Keyword(s):  
Image Analysis ◽  
High Speed ◽  
Evaluation Method ◽  
Recognition Rate ◽  
High Speed Railway ◽  
Analysis Methods ◽  
Track Condition ◽  
Ballasted Track ◽  
Track Irregularity

The advancement in digital image analysis methods has led to the development of various techniques, i.e., quantification of ballast gravel abrasion. In this study, the recognition rate of gravel aggregates has been significantly increased by improving the image analysis methods. The correlation between the track quality index (TQI), which is the standard deviation of vertical track irregularity and represents the condition of a high-speed railway, and the number of maintenance works was analyzed by performing an image analysis on the samples collected from various locations of a high-speed railway. The results revealed that roundness has the highest correlation with the TQI, whereas sphericity has the highest correlation with the number of maintenance works. The ballast replacement would be performed to improve maintenance efficiency if the abrasion of the ballast aggregates becomes approximately 10%.

Influence of Side Stringer to Deck Deformation of Four-Lines High-Speed Railway Cable-Stayed Bridge with Double Cable Planes

2012 ◽  
Vol 178-181 ◽  
pp. 2462-2467
Author(s):  
Jiong Liang ◽  
Mei Xin Ye
Keyword(s):  
High Speed ◽  
Short Wave ◽  
Axial Stiffness ◽  
High Speed Railway ◽  
3D Finite Element ◽  
Cable Stayed Bridge ◽  
Long Wave ◽  
Transversal Wave ◽  
Wave Change ◽  
3D Finite Element Method

Taking Beijiang Bridge as an example, using 3D finite element method, influence of side stringer to deck deformation of four-lines high-speed railway cable-stayed bridge with double cable planes is studied. The results show that the stiffness of the side stringer hardly influence the long wave of bridge deformation and the ratio of deflection to span, but significantly affects the short wave and transversal wave of the bridge deformation. The location of the side stringer influences the long wave slightly, but influences the short wave and transversal wave significantly. If the distance between the side stringer and the center of the main trusses changed, the long wave changes slightly, while the maximum short wave and transversal wave change a lot. The larger the distance, the less the transversal span of the deck and panel beams are, and the less the short wave and transversal wave are. The influence of the axial stiffness of horizontal K-shaped brace to the bridge deformation is small.

Sign in / Sign up

Export Citation Format

Share Document