scholarly journals Effect of Bridge-Pier Differential Settlement on the Dynamic Response of a High-Speed Railway Train-Track-Bridge System

2017 ◽  
Vol 2017 ◽  
pp. 1-13 ◽  
Author(s):  
Xiaohui Zhang ◽  
Yao Shan ◽  
Xinwen Yang
Keyword(s):  
Dynamic Response ◽  
High Speed ◽  
Tensile Force ◽  
Differential Settlement ◽  
Bridge Pier ◽  
Vertical Acceleration ◽  
Train Track ◽  
Allowable Limit ◽  
High Speed Railway ◽  
Track Bridge

A model based on the theory of train-track-bridge coupling dynamics is built in the article to investigate how high-speed railway bridge pier differential settlement can affect various railway performance-related criteria. The performance of the model compares favorably with that of a 3D finite element model and train-track-bridge numerical model. The analysis of the study demonstrates that all the dynamic response for a span of 24 m is slightly larger than that for a span of 32 m. The wheel unloading rate increases with pier differential settlement for all of the calculation conditions considered, and its maximum value of 0.695 is well below the allowable limit. Meanwhile, the vertical acceleration increases with pier differential settlement and train speed, respectively, and the values for a pier differential settlement of 10 mm and speed of 350 km/h exceed the maximum allowable limit stipulated in the Chinese standards. On this basis, a speed limit for the exceeding pier differential settlement is determined for comfort consideration. Fasteners that had an initial tensile force due to pier differential settlement experience both compressive and tensile forces as the train passes through and are likely to have a lower service life than those which solely experience compressive forces.

scholarly journals The Influence of an Integration Time Step on Dynamic Calculation of a Vehicle-Track-Bridge under High-Speed Railway

Mathematics ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 431
Author(s):  
Junjie Ye ◽  
Hao Sun
Keyword(s):  
High Speed ◽  
Coupled Model ◽  
Short Wave ◽  
Integration Time ◽  
Vertical Acceleration ◽  
Dynamic Calculation ◽  
Time Step ◽  
High Speed Railway ◽  
Track Irregularity ◽  
Track Bridge

In order to study the influence of an integration time step on dynamic calculation of a vehicle-track-bridge under high-speed railway, a vehicle-track-bridge (VTB) coupled model is established. The influence of the integration time step on calculation accuracy and calculation stability under different speeds or different track regularity states is studied. The influence of the track irregularity on the integration time step is further analyzed by using the spectral characteristic of sensitive wavelength. According to the results, the disparity among the effect of the integration time step on the calculation accuracy of the VTB coupled model at different speeds is very small. Higher speed requires a smaller integration time step to keep the calculation results stable. The effect of the integration time step on the calculation stability of the maximum vertical acceleration of each component at different speeds is somewhat different, and the mechanism of the effect of the integration time step on the calculation stability of the vehicle-track-bridge coupled system is that corresponding displacement at the integration time step is different. The calculation deviation of the maximum vertical acceleration of the car body, wheel-sets and bridge under the track short wave irregularity state are greatly increased compared with that without track irregularity. The maximum vertical acceleration of wheel-sets, rails, track slabs and the bridge under the track short wave irregularity state all show a significant declining trend. The larger the vibration frequency is, the smaller the range of integration time step is for dynamic calculation.

scholarly journals High-Speed Train-Track-Bridge Dynamic Interaction considering Wheel-Rail Contact Nonlinearity due to Wheel Hollow Wear

2019 ◽  
Vol 2019 ◽  
pp. 1-18 ◽  
Author(s):  
Chao Chang ◽  
Liang Ling ◽  
Zhaoling Han ◽  
Kaiyun Wang ◽  
Wanming Zhai
Keyword(s):  
High Speed ◽  
Synthesis Method ◽  
Dynamic Interaction ◽  
High Speed Train ◽  
Train Track ◽  
High Speed Railway ◽  
Long Span ◽  
Continuous Girder Bridge ◽  
Girder Bridge ◽  
Track Bridge

Wheel hollow wear is a common form of wheel-surface damage in high-speed trains, which is of great concern and a potential threat to the service performance and safety of the high-speed railway system. At the same time, rail corridors in high-speed railways are extensively straightened through the addition of bridges. However, only few studies paid attention to the influence of wheel-profile wear on the train-track-bridge dynamic interaction. This paper reports a study of the high-speed train-track-bridge dynamic interactions under new and hollow worn wheel profiles. A nonlinear rigid-flexible coupled model of a Chinese high-speed train travelling on nonballasted tracks supported by a long-span continuous girder bridge is formulated. This modelling is based on the train-track-bridge interaction theory, the wheel-rail nonelliptical multipoint contact theory, and the modified Craig–Bampton modal synthesis method. The effects of wheel-rail nonlinearity caused by the wheel hollow wear are fully considered. The proposed model is applied to predict the vertical and lateral dynamic responses of the high-speed train-track-bridge system under new and worn wheel profiles, in which a high-speed train passing through a long-span continuous girder bridge at a speed of 350 km/h is considered. The numerical results show that the wheel hollow wear changes the geometric parameters of the wheel-rail contact and then deteriorates the train-track-bridge interactions. The worn wheels can increase the vibration response of the high-speed railway bridges.

Dynamic Response of High-Speed Train-Track-Bridge Coupling System Subjected to Simultaneous Wind and Rain

2021 ◽  
pp. 2150161
Author(s):  
Hongye Gou ◽  
Wenhao Li ◽  
Siqing Zhou ◽  
Yi Bao ◽  
Tianqi Zhao ◽  
...  
Keyword(s):  
Dynamic Response ◽  
High Speed ◽  
Simultaneous Action ◽  
High Speed Train ◽  
Train Track ◽  
Safe Operation ◽  
Coupling System ◽  
High Speed Trains ◽  
Track Bridge ◽  
Bridge System

The Lanzhou-Xinjiang High-speed Railway runs through a region of over 500[Formula: see text]km that is amenable to frequent winds. The strong wind and rainfall pose a great threat to the safe operation of high-speed trains. To tackle the aforementioned climate challenges, this paper investigates the dynamic response of the high-speed train-track-bridge coupling system under the simultaneous action of winds and rains for the safe operation of trains. Specifically, there are four main objectives: (1) to develop a finite element model to analyze the dynamic response of the train-track-bridge system in windy and raining conditions; (2) to investigate the aerodynamic loads posed to the train-track-bridge system by winds and rains; (3) to evaluate the effects of wind speed and rainfall intensity on the train-track-bridge system; and (4) to assess the safety of trains at different train speeds and under various wind-rain conditions. To this end, this paper first establishes a train-track-bridge model via ANSYS and SIMPACK co-simulation and the aerodynamics models of the high-speed train and bridge through FLUENT to form a safety analysis system for high-speed trains running on the bridge under the wind-rain conditions. Then, the response of the train-track-bridge system under different wind speeds and rainfall intensities is studied. The results show that the effects of winds and rains are coupled. The rule of variation for the train dynamic response with respect to various wind and rain conditions is established, with practical suggestions provided for control of the safe operation of high-speed trains.

scholarly journals The Seismic Response of High-Speed Railway Bridges Subjected to Near-Fault Forward Directivity Ground Motions Using a Vehicle-Track-Bridge Element

2014 ◽  
Vol 2014 ◽  
pp. 1-17 ◽  
Author(s):  
Chen Ling-kun ◽  
Jiang Li-zhong ◽  
Guo Wei ◽  
Liu Wen-shuo ◽  
Zeng Zhi-ping ◽  
...  
Keyword(s):  
High Speed ◽  
Ground Motions ◽  
Element Model ◽  
Railway Vehicle ◽  
Vertical Acceleration ◽  
High Speed Railway ◽  
Near Fault ◽  
Pulse Effect ◽  
Short Period ◽  
Track Bridge

Based on the Next Generation Attenuation (NGA) project ground motion library, the finite element model of the high-speed railway vehicle-bridge system is established. The model was specifically developed for such system that is subjected to near-fault ground motions. In addition, it accounted for the influence of the rail irregularities. The vehicle-track-bridge (VTB) element is presented to simulate the interaction between train and bridge, in which a train can be modeled as a series of sprung masses concentrated at the axle positions. For the short period railway bridge, the results from the case study demonstrate that directivity pulse effect tends to increase the seismic responses of the bridge compared with far-fault ground motions or nonpulse-like motions and the directivity pulse effect and high values of the vertical acceleration component can notably influence the hysteretic behaviour of piers.

Effects of Pier Deformation on Train Operations within High-Speed Railway Ballastless Track–Bridge Systems

2018 ◽  
Vol 2672 (10) ◽  
pp. 96-105 ◽  
Author(s):  
De Zhang ◽  
Junhua Xiao ◽  
Xiao Zhang
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
High Speed ◽  
Element Model ◽  
Lateral Deformation ◽  
Train Track ◽  
High Speed Railway ◽  
Ballastless Track ◽  
Train Operation ◽  
Track Bridge

The deformation of a bridge foundation (i.e. pier) for a ballastless track of a high-speed railway may cause additional irregularities within the track, thereby affecting train operation. By using a unit slab ballastless track bridge system as the research object, this study built a finite element model and a train–track dynamic interaction model. The additional rail deformation caused by the vertical or lateral deformation of a bridge pier was calculated by the finite element model, and then the effects on train operation due to the additional rail deformation were analyzed by the train–track dynamic model. It was found that the lateral deformation of a single pier should be of the most concern for the management and control of a high-speed railway. Specifically, when a pier suffered settlement and lateral deformation concurrently, the evaluation indices of train operation were primarily affected by the magnitude of the lateral deformation, and were only slightly affected by the settlement.

Analysis of structural stresses of tracks and vehicle dynamic responses in train–track–bridge system with pier settlement

2016 ◽  
Vol 232 (2) ◽  
pp. 421-434 ◽  
Author(s):  
Zhaowei Chen ◽  
Wanming Zhai ◽  
Qiang Yin
Keyword(s):  
High Speed ◽  
Dynamic Responses ◽  
Vertical Acceleration ◽  
Vehicle Dynamic ◽  
Train Track ◽  
Slab Track ◽  
Structural Stresses ◽  
Track Bridge ◽  
Bridge System ◽  
Dynamic Indicators

Pier settlement causes deformation of bridge structures, and further distorts the track structures placed on bridge decks, which may greatly affect the service life of the tracks and safe operation of trains. This study analyzes track stresses and vehicle dynamic responses in train–track–bridge system with pier settlement and determines the pier settlement safe value for high-speed railways with China Railway Track System (CRTS) II slab tracks. First, a detailed train–track–bridge dynamic model is established based on the train–track–bridge dynamic interaction theory. Verified with field experimental results, the model is utilized to calculate the dynamic responses of the vehicle–track–bridge system with different pier settlement values. Finally, the safe value of the pier settlement in the CRTS II slab track railway line is determined according to the limit of the vehicle dynamic indicators and the structural stresses of tracks. The results show that the vertical acceleration of the car body is more sensitive to pier settlement among all the vehicle dynamic indicators. Structural stresses of tracks caused by pier settlement appear at the positions of the pier with settlement and its two adjacent piers. The effect of train loads on the track stresses is much smaller than that of the pier settlement. It is important to adopt the structural stresses of tracks as the evaluation criteria of the pier settlement safe value than the vehicle dynamic indicators. Taking the effects of the bridge pier settlement, the vehicle load, the prestress effect, and the self-weight into consideration, the pier settlement safe value for the high-speed railway lines with the CRTS II slab track is 11.5 mm.

Stochastic Transverse Earthquake-Induced Damage Track Irregularity Spectrum Considering the Uncertainty of Track-Bridge System

2021 ◽  
pp. 2140004
Author(s):  
Yulin Feng ◽  
Yu Hou ◽  
Lizhong Jiang ◽  
Wangbao Zhou ◽  
Jian Yu ◽  
...  
Keyword(s):  
Simulation Model ◽  
Traffic Safety ◽  
High Speed ◽  
Residual Deformation ◽  
High Speed Railway ◽  
Marquardt Algorithm ◽  
Earthquake Action ◽  
Track Irregularity ◽  
Track Bridge ◽  
Bridge System

The track irregularity spectrum of longitudinally connected ballastless track (LCBT)-bridge systems of high-speed railway was proposed in this paper. First, a simulation model of an LCBT-continuous girder bridge was established by considering the influences of approach bridges and subgrade with track structure. Further, a large number of sample analyses were carried out by taking into account the uncertainty of LCBT-bridge systems and stochastic behaviors of ground motions based on the simulation model. The damage laws of residual deformation of track-bridge system after earthquake actions were studied. Then, an interlayer deformation coordination relationship (IDCR) considering the track irregularity caused by earthquake-induced damage of bearings was developed, and the superposed track irregularity samples were obtained. Finally, by using the improved Blackman–Turkey method and Levenberg–Marquardt algorithm, the LCBT irregularity spectrum, track irregularity spectrogram, track irregularity limit spectrum, and a fitting formula for the track irregularity spectrum on a bridge after the action of earthquakes were obtained. Results obtained from the fitting formula and IDCR were compared, and they indicated that tracks undergone significant high-frequency irregularity diseases after the earthquake action. It was found that the track irregularity spectrum could be roughly divided into three ranges: high-, medium- and low-frequency wavebands. Consequently, this led to an application of a three-segment power function for the fitting of the track irregularity spectrum after the earthquake action. The track irregularity spectrum after the action of earthquakes provides an important theoretical basis for the establishment of seismic design methods for high-speed railway bridges based on the traffic safety performance.

Sign in / Sign up

Export Citation Format

Share Document