scholarly journals Mechanical Properties of Furnace Slag and Coal Gangue Mixtures Stabilized by Cement and Fly Ash

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7103
Author(s):  
Hongbo Li ◽  
Hubiao Zhang ◽  
Pengfei Yan ◽  
Changyu Yan ◽  
Yufei Tong
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fly Ash ◽  
Unconfined Compressive Strength ◽  
Cement Content ◽  
Peak Stress ◽  
Coal Gangue ◽  
Replacement Rate ◽  
Splitting Strength ◽  
The Relationship

The mechanical properties and strength formation mechanism of cement–fly-ash-stabilized slag–coal gangue mixture were examined using an unconfined compressive strength test, splitting strength test, triaxial test, and scanning electron microscopy to solve the limitations of land occupation and environmental pollution that is caused by fly ash from the Xixia District thermal power plant in Yinchuan, slag from the Ningdong slag yard, and washed coal gangue. Its performance as a pavement base mixture on the road was investigated. The results demonstrated that as the slag replacement rate increased, the maximum water content increased while the maximum dry density decreased. The addition of slag reduced the unconfined compressive strength and splitting strength of the specimens; furthermore, the higher the slag substitution rate, the lower the unconfined compressive strength and splitting strength of the specimens. As the cement content increased, the specimen’s unconfined compressive strength increased. Based on the principle of considering the mechanical properties and economic concerns, the slag replacement rate in the actual construction should be ~50% and should not exceed 75%. Based on the relationship between the compressive strength and splitting strength of ordinary concrete, the relationship model between the unconfined compressive strength and splitting strength of cement–fly-ash-stabilized slag–coal gangue was established. The failure mode, stress–strain curve, peak stress, and failure criterion of these specimens were analyzed based on the triaxial test results, and the relationship formulas between the slag substitution rate, cement content, peak stress, and confining pressure were fitted. As per the SEM results, the mixture’s hydration products primarily included amorphous colloidal C-S-H, needle rod ettringite AFt, unhydrated cement clinker particles, and fly ash particles. The analysis of the mixture’s strength formation mechanism showed that the mixture’s strength was the comprehensive embodiment of all factors, such as the microaggregate effect, secondary hydration reaction, and material characteristics.

scholarly journals Study on Mechanical and Frost Resistance Properties of Slag and Macadam Stabilized with Cement and Fly Ash

Materials ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7241
Author(s):  
Hongbo Li ◽  
Pengfei Yan ◽  
Juncang Tian ◽  
Hao Sun ◽  
Jianguang Yin
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Frost Resistance ◽  
Unconfined Compressive Strength ◽  
Thermal Power ◽  
Ultrasonic Test ◽  
Replacement Rate ◽  
Large Country ◽  
Splitting Strength ◽  
Strength Tests

China is a large country in terms of coal production and consumption. The fly ash and slag produced by thermal power plants pose a great threat to the environment. To reduce the adverse effects of fly ash and slag on the environment, a mixture of slag and macadam stabilized with cement and fly ash was prepared as pavement base material. Compaction tests, unconfined compressive strength tests, splitting strength tests, frost resistance tests, and ultrasonic tests were performed on the mixture. The results show that with an increase in slag replacement rate, the unconfined compressive strength and splitting strength decreased. However, the adverse influence of the slag replacement rate on unconfined compressive strength and splitting strength of specimens gradually weakened with increasing curing time. The frost resistance of the mixture first increased and then decreased with an increase in the slag replacement rate. When cement content was 5% and the slag replacement rate was 50%, the frost resistance of the mixture was the best. Regression analysis of the ultrasonic test showed that the ultrasonic test can effectively characterize the strength of the mixture and the internal damage degree under freeze–thaw cycles. In conclusion, the slag replacement rate of the mixture is recommended to be ~50%, which has preferable mechanical and frost resistance performance.

scholarly journals Investigation on cement-improved phyllite based on the vertical vibration compaction method

PLoS ONE ◽  
2021 ◽  
Vol 16 (3) ◽  
pp. e0247599
Author(s):  
Yingjun Jiang ◽  
Jiangtao Fan ◽  
Yong Yi ◽  
Tian Tian ◽  
Kejia Yuan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Static Pressure ◽  
Cement Content ◽  
Vertical Vibration ◽  
Pressure Method ◽  
Vibration Compaction ◽  
Modulus Of Resilience ◽  
Compaction Method

The vertical vibration compaction method (VVCM), heavy compaction method and static pressure method were used to form phyllite specimens with different degrees of weathering. The influence of cement content, compactness, and compaction method on the mechanical properties of phyllite was studied. The mechanical properties of phyllite was evaluated in terms of unconfined compressive strength (Rc) and modulus of resilience (Ec). Further, test roads were paved along an expressway in China to demonstrate the feasibility of the highly weathered phyllite improvement technology. Results show that unweathered phyllite can be used as subgrade filler. In spite of increasing compactness, phyllite with a higher degree of weathering cannot meet the requirements for subgrade filler. With increasing cement content, Rc and Ec of the improved phyllite increases linearly. Rc and Ec increase by at least 15% and 17%, respectively, for every 1% increase in cement content and by at least 10% and 6%, respectively, for every 1% increase in compactness. The higher the degree of weathering of phyllite, the greater the degree of improvement of its mechanical properties.

Correlation between Unconfined Compressive Strength and Penetration Index Obtained from DCP Tests for Cemented Lateritic Soils

2019 ◽  
Vol 814 ◽  
pp. 399-403
Author(s):  
Anuchit Uchaipichat
Keyword(s):  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Cement Content ◽  
Lateritic Soil ◽  
Test Results ◽  
Cone Penetration ◽  
Penetration Index ◽  
Curing Period ◽  
Cemented Soils ◽  
The Relationship

This paper presents the relationship between the dynamic cone penetration (DCP) test results and the unconfined compressive strength of lateritic cemented soils. A series of DCP tests and unconfined compressive strength was performed on lateritic cemented soil. The soils sample used in this study was lateritic soil. The test results for the DCP tests are presented in terms of penetration index. It can be observed that the penetration index decreased with increasing curing period and cement content. Moreover, the unconfined compressive strength of cemented soils increased with curing period and cement content. The relationship between unconfined compressive strength and penetration index is presented. A unique relationship for unconfined compressive strength can be obtained.

Influence of Curing Pressure on Unconfined Compressive Strength of Cemented Clay

2018 ◽  
Vol 928 ◽  
pp. 263-268 ◽  
Author(s):  
Anuchit Uchaipichat
Keyword(s):  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Cement Content ◽  
Soft Clay ◽  
Peak Stress ◽  
Confining Pressure ◽  
Compression Tests ◽  
Unconfined Compression ◽  
Soil Cement ◽  
Curing Pressure

The soil-cement columns are generally installed and cured in the soft clay layers under confining pressure. The strength of the soil-cement columns may be influenced by confining pressure during curing period. In this study, the main objective was to study the influence of curing pressure on unconfined compressive strength of cemented clay. A series of unconfined compression tests was performed on a cement admixed clay sample cured under pressure values of 0 kPa (atmospheric pressure), 25kPa, 50kPa and 100 kPa using a typical unconfined compression equipment. The test samples with values of cement content of 0.5, 1.0 and 2.0 percent were cured for 28 days.The stress-strain curves obtained from all tests show a peak value of stress. The unconfined compressive strength or peak stress obviously increased with increasing cement content for all curing pressure conditions. It can be observed that the strength of samples gradually increased with curing pressure for cement content of 0.5 percent. For cement contents of 1.0 and 2.0 percent, the strengths of samples cured under pressures of 25 kPa dramatically increased from the strength of samples cured without pressure (0 kPa), however, the strengths of samples for curing pressures of 25, 50 and 100 kPa were not clearly different.

Laboratory Experimental Research on Mix Ratio Test of Cement Soil

2013 ◽  
Vol 438-439 ◽  
pp. 197-201
Author(s):  
Xian Hua Yao ◽  
Peng Li ◽  
Jun Feng Guan
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Cement Content ◽  
Ratio Test ◽  
Curing Time ◽  
Curing Conditions ◽  
Cement Ratio ◽  
Water Cement Ratio ◽  
Cement Soil

Based on the generalization and analysis of laboratory experimental results on mix ratio, the effects of various factors such as cement content, water-cement ratio, curing time, curing conditions and types of cement on the mechanical properties of unconfined compressive strength of cement soil are presented. Results show that the unconfined compressive strength of cement soil increases with the growing curing time, and it is greatly affected by the cement content, water-cement ratio, cement types and curing time, while the effect of curing conditions is weak with a cement content of more than 10%. Moreover, the stress-strain of the cement soil responds with the cement content and curing time, increasing curing time and cement content makes the cement soil to be harder and brittle, and leads to a larger Young's modulus.

Experimental and Theoretical Study of Air-Entraining Concrete under Biaxial Compression after Freezing-Thawing Cycle

2011 ◽  
Vol 243-249 ◽  
pp. 214-217
Author(s):  
Jia Wei Yao ◽  
Yu Pu Song ◽  
Ling Xia Gao
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Failure Criterion ◽  
Theoretical Study ◽  
Peak Stress ◽  
Biaxial Compression ◽  
Thawing Cycle ◽  
Experiment Method ◽  
Strength And Deformation ◽  
The Relationship

Mechanical properties experiments of air-entraining concrete after suffered to 0, 100, 200, 300 and 400 freezing-thawing cycles were performed. The experiment method, contents and result of strength and deformation of air-entraining after freezing-thawing cycle under biaxial compression were also introduced. The relationship between the strain corresponding to peak stress and cycle of freezing-thawing as well as the relationship between compressive strength and cycle of freezing-thawing were analyzed. The failure criterion of air-entraining concrete under biaxial compression was established.

scholarly journals Study on Mechanical Properties of PET Fiber-Reinforced Coal Gangue Fine Aggregate Concrete

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Yanlin Huang ◽  
An Zhou
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
Plain Concrete ◽  
Coal Gangue ◽  
Fine Aggregate ◽  
Replacement Rate ◽  
River Sand ◽  
Aggregate Concrete

In recent years, with the rapid development of the construction industry, the demand for natural river sand has become increasingly prominent. Development of alternatives to river sand has become an interesting direction for concrete research. In this paper, coal gangue was proposed to replace part of the river sand to produce coal gangue fine aggregate concrete, while waste polyethene terephthalate (PET) bottles were used as raw materials to make PET fibers to improve the mechanical properties of coal gangue fine aggregate concrete. There were two parts of the test conducted. In the first part, the compressive strength of the gangue fine aggregate concrete cube, splitting tensile strength, axial compressive strength, and static elastic modulus were studied when the substitution rate of coal gangue increased from 0% to 50%. Referring to the equation of the full stress-strain curve of plain concrete, the stress-strain constitutive equation of coal gangue fine aggregate concrete was analyzed and studied. By comparing with plain concrete, it was found that the coal gangue concrete with a replacement rate of 50% had higher compressive strength and tensile strength, but its brittleness was significantly greater than that of plain concrete in the later stage. In the second part, by studying the effect of different PET fiber content on the mechanical properties of coal gangue fine aggregate concrete with a replacement rate of 50%, it was found that when the addition of PET fiber was 0.1% and 0.3%, not only were compressive strength, splitting tensile strength, static elastic modulus, and flexural strength of the gangue fine aggregate concrete effectively improved but also the brittleness of concrete can be significantly reduced. The study found that after adding 0.3% PET fiber, the coal gangue fine aggregate concrete with a replacement rate of 50% has better mechanical properties and less brittleness.

Effect of Fly Ash Content on Mechanical Properties of Cement-Fly Ash Stabilized Crushed Stones

2014 ◽  
Vol 548-549 ◽  
pp. 228-232 ◽  
Author(s):  
Xiao Chen ◽  
Ji Wei Liu ◽  
Ming Kai Zhou
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fly Ash ◽  
Crack Resistance ◽  
Unconfined Compressive Strength ◽  
Resilient Modulus ◽  
Ash Content ◽  
Mechanical Parameters ◽  
Cleavage Strength ◽  
The Impact

To improve the impact of fly ash on the properties of cement-fly ash stabilized crushed stone, and promote it popularize and apply better. This paper investigated the effect of fly ash content on unconfined compressive strength, cleavage strength and resilient modulus of cement-fly ash stabilized crushed stones, and those relationships between mechanical parameters. The results showed that with increasing of the fly ash content, the unconfined compressive strength and cleavage strength increased at first, then decreased, the resilient modulus decreased, and The brittleness index increased. We can conclude that the optimal fly ash content is between 10% and 15%, and increment of fly ash content can improve its crack-resistance.

Effect of Fly Ash Content on Mechanical Properties of Cement-Fly Ash Stabilized Crushed Stones

2010 ◽  
Vol 168-170 ◽  
pp. 1881-1885
Author(s):  
Xiao Chen ◽  
Ming Kai Zhou ◽  
Jia Liu
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fly Ash ◽  
Crack Resistance ◽  
Unconfined Compressive Strength ◽  
Resilient Modulus ◽  
Ash Content ◽  
Brittleness Index ◽  
Mechanical Parameters ◽  
Cleavage Strength

This paper investigates the effect of fly ash content on unconfined compressive strength, cleavage strength and resilient modulus of cement-fly ash stabilized crushed stones. The relationships between mechanical parameters were also studied. The results show that with fly ash content increasing, the unconfined compressive strength and cleavage strength were increasing firstly but decreased then, and the resilient modulus were decreasing. The brittleness index was increased by the increment of fly ash content. It can be concluded that the optimal fly ash content in cement-fly ash stabilized crushed stones is between 10% and 15%, and increment of fly ash content can improve its crack-resistance.

scholarly journals Experimental Research on Foamed Mixture Lightweight Soil Mixed with Fly-Ash and Quicklime as Backfill Material behind Abutments of Expressway Bridge

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Xin Liu ◽  
Ke Sheng ◽  
Zhi-long Li ◽  
Liang-qin Gan ◽  
Hao Shan ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Unconfined Compressive Strength ◽  
Narrow Range ◽  
Cement Content ◽  
Orthogonal Experiment ◽  
Construction Techniques ◽  
Key Points ◽  
Experiment Method ◽  
Orthogonal Experiment Method

To promote the utilization of fly-ash, based on the orthogonal experiment method, wet density and unconfined compressive strength of Foamed Mixture Lightweight Soil mixed with fly-ash and quicklime (FMLSF) are studied. It is shown that the wet density and unconfined compressive strength of FMLSF increase with the increase of cement content, while decreasing with the increase of foam content. With the mixing content of fly-ash increase, the wet density and unconfined compressive strength of FMLSF increase firstly and then decrease. Scanning Electron Microscope (SEM) tests show that ball effect or microaggregate effect of fly-ash improves the wet density and unconfined compressive strength of FMLSF. With the mixing content of quicklime increase, the wet density and unconfined compressive strength of FMLSF increase firstly within a narrow range and then decrease. In addition, the primary and secondary influence order on wet density and 28-day compressive strength of FMLSF are obtained, as well as the optimal mixture combination. Finally, based on two abutments in China, behind which they are filled with FMLSF and Foamed Mixture Lightweight Soil (FMLS), the construction techniques and key points of quality control behind abutment are compared and discussed in detail, and the feasibility of utilization fly-ash as FMLSF is verified by the experimental results.

Sign in / Sign up

Export Citation Format

Share Document