scholarly journals Polymer Nanocomposites with High Energy Density Utilizing Oriented Nanosheets and High-Dielectric-Constant Nanoparticles

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 4780
Author(s):  
Yushu Li ◽  
Yao Zhou ◽  
Sang Cheng ◽  
Jun Hu ◽  
Jinliang He ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Energy Density ◽  
Polymer Nanocomposites ◽  
High Dielectric Constant ◽  
Vinylidene Fluoride ◽  
Dielectric Materials ◽  
High Energy ◽  
High Energy Density ◽  
Capacitive Energy Storage ◽  
High Dielectric

The development of high-energy-density electrostatic capacitors is critical to addressing the growing electricity need. Currently, the widely studied dielectric materials are polymer nanocomposites incorporated with high-dielectric-constant nanoparticles. However, the introduction of high-dielectric-constant nanoparticles can cause local electric field distortion and high leakage current, which limits the improvement in energy density. In this work, on the basis of conventional polymer nanocomposites containing high-dielectric-constant nanoparticles, oriented boron nitride nanosheets (BNNSs) are introduced as an extra filler phase. By changing the volume ratios of barium titanate (BT) and BNNSs, the dielectric property of polymer nanocomposites is adjusted, and thus the capacitive energy storage performance is optimized. Experimental results prove that the oriented BNNSs can suppress the propagation of charge carriers and decrease the conduction loss. Using poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP)) as the polymer matrix, the P(VDF-HFP)/BNNS/BT nanocomposite has a higher discharged energy density compared with the conventional nanocomposite with the freely dispersed BT nanoparticles.

Synthesize CCTO Using Different Mixing Media

2016 ◽  
Vol 840 ◽  
pp. 87-90 ◽  
Author(s):  
Rosyaini Afindi Zaman ◽  
Mohamad Johari Abu ◽  
Saniah Abdul Karim ◽  
Julie Juliewatty Mohamed ◽  
Mohd Fadzil Ain ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
High Dielectric Constant ◽  
Electronic Devices ◽  
Sol Gel ◽  
Dielectric Materials ◽  
High Energy ◽  
High Energy Density ◽  
Dielectric Ceramic ◽  
Wide Range ◽  
High Dielectric

In recent years, there has been an increasing interest on high dielectric constant that have significant applications in electronic devices. Dielectric materials have many technological applications such as capacitors, resonators and filters. High dielectric ceramic capacitors based perovskite oxides are necessary for modern electronic devices and are found to be suitable for a wide range of applications. Subramanian et al. discovered the high dielectric constant of CaCu3Ti4O12 (CCTO) ~ 10,000 at room temperature. CCTO has the cubic perovskite crystal structure and high dielectric constant of ~ 104 up to 105 at radio frequency and good temperature stability over a wide temperature range [1,2]. These properties were desired for various microelectronic applications. With the high dielectric constant, the material can store more charge and the values make CCTO an attractive material for ultra-high energy density capacitors. However, this properties can be accomplished if single phase of CCTO is formed. Many research have been done recently on the synthesis of the cubic perovskite CCTO and many techniques are working such as sol-gel route [3], combustion techniques [4], molten salt process [5] and etc., but this technique is difficult and complex process during sample preparation.

Polar-fluoropolymer Blends for High Energy Density Low Loss Capacitor Applications

2011 ◽  
Vol 1312 ◽  
Author(s):  
Shan Wu ◽  
Minren Lin ◽  
David S-G. Lu ◽  
Qiming Zhang
Keyword(s):  
Dielectric Constant ◽  
Energy Density ◽  
Electric Fields ◽  
Vinylidene Fluoride ◽  
High Energy ◽  
High Energy Density ◽  
Low Loss ◽  
Blend Films ◽  
Dielectric Performance ◽  
High Dielectric

ABSTRACTBesides energy density, the electric loss at high electric fields is another major concern for many capacitor applications. This paper presents recent works in developing high energy density low loss polymer capacitors. In order to reduce the dielectric loss while maintaining high energy density in poly(vinylidene fluoride-hexafluoropropylene) P(VDF-HFP) and P(VDF-CTFE) (CTFE: Chlorotrifluoroethylene) based polymers, a polymer blend approach was investigated. We show that by blending P(VDF-CTFE) with a proper low loss polymer such as poly(ethylene- chlorotrifluoroethylene) (ECTFE) can lead to marked improvement in the loss of dielectric films. In this study, P(VDF-CTFE) blends films with different wt% of ECTFE have been examined to find a balance between dielectric constant and the loss. In addition, crosslink in the blends has been employed to further improve the dielectric performance of the blends. The results indicate that these blends exhibit an excellent performance: relatively high dielectric constant (~ 6~7) and low loss (~ 0.01) at 1 kHz. For the crosslink blend films, the high field loss is reduced to below 5% with a discharged energy density 4.3 J/cm3 under a field of 300 MV/m.

Composition-Microstructure-Property Relationships in BaTiO3 with Mg Addition

2015 ◽  
Vol 659 ◽  
pp. 58-63
Author(s):  
Oratai Jongprateep ◽  
Tunchanoke Khongnakhon ◽  
Jednupong Palomas
Keyword(s):  
Dielectric Constant ◽  
Dielectric Loss ◽  
Barium Titanate ◽  
High Efficiency ◽  
High Dielectric Constant ◽  
Dielectric Materials ◽  
High Energy ◽  
High Energy Density ◽  
Low Dielectric ◽  
High Dielectric

Rising worldwide demands for energy encourages development of high-efficiency energy storage and capacitor components. Main requirements for dielectric materials employed in fabrication of high energy density capacitors include high dielectric constant, high dielectric breakdown strength, and low dielectric loss. Owing to its high dielectric constant and low dielectric loss [1], barium titanate is among common capacitor materials. Tailoring of dielectric properties of barium titanate can be achieved through controlled chemical composition, microstructure, and crystal structure. Synthesis and processing techniques, as well as doping of barium titanate, can be key factors to control the composition and structure, which consequently contribute to enhancement of dielectric constant in the material.

Enhanced dielectric properties and thermostability in polyimide composites with core-shell structured polyimide@BaTiO3 nanoparticles

2021 ◽  
pp. 095400832199352
Author(s):  
Wei Deng ◽  
Guanguan Ren ◽  
Wenqi Wang ◽  
Weiwei Cui ◽  
Wenjun Luo
Keyword(s):  
Dielectric Constant ◽  
Dielectric Loss ◽  
Energy Density ◽  
Breakdown Strength ◽  
In Situ Polymerization ◽  
Dielectric Materials ◽  
High Energy ◽  
Amic Acid ◽  
High Energy Density ◽  
Core Shell

Polymer composites with high dielectric constant and thermal stability have shown great potential applications in the fields relating to the energy storage. Herein, core-shell structured polyimide@BaTiO3 (PI@BT) nanoparticles were fabricated via in-situ polymerization of poly(amic acid) (PAA) and the following thermal imidization, then utilized as fillers to prepare PI composites. Increased dielectric constant with suppressed dielectric loss, and enhanced energy density as well as heat resistance were simultaneously realized due to the presence of PI shell between BT nanoparticles and PI matrix. The dielectric constant of PI@BT/PI composites with 55 wt% fillers increased to 15.0 at 100 Hz, while the dielectric loss kept at low value of 0.0034, companied by a high energy density of 1.32 J·cm−3, which was 2.09 times higher than the pristine PI. Moreover, the temperature at 10 wt% weight loss reached 619°C, demonstrating the excellent thermostability of PI@BT/PI composites. In addition, PI@BT/PI composites exhibited improved breakdown strength and toughness as compared with the BT/PI composites due to the well dispersion of PI@BT nanofillers and the improved interfacial interactions between nanofillers and polymer matrix. These results provide useful information for the structural design of high-temperature dielectric materials.

scholarly journals Sandwich-structured polymer nanocomposites with high energy density and great charge–discharge efficiency at elevated temperatures

2016 ◽  
Vol 113 (36) ◽  
pp. 9995-10000 ◽  
Author(s):  
Qi Li ◽  
Feihua Liu ◽  
Tiannan Yang ◽  
Matthew R. Gadinski ◽  
Guangzu Zhang ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
High Temperature ◽  
Energy Density ◽  
Polymer Nanocomposites ◽  
Elevated Temperatures ◽  
High Energy ◽  
Operating Conditions ◽  
High Dielectric ◽  
Discharge Efficiency ◽  
Charge Discharge

The demand for a new generation of high-temperature dielectric materials toward capacitive energy storage has been driven by the rise of high-power applications such as electric vehicles, aircraft, and pulsed power systems where the power electronics are exposed to elevated temperatures. Polymer dielectrics are characterized by being lightweight, and their scalability, mechanical flexibility, high dielectric strength, and great reliability, but they are limited to relatively low operating temperatures. The existing polymer nanocomposite-based dielectrics with a limited energy density at high temperatures also present a major barrier to achieving significant reductions in size and weight of energy devices. Here we report the sandwich structures as an efficient route to high-temperature dielectric polymer nanocomposites that simultaneously possess high dielectric constant and low dielectric loss. In contrast to the conventional single-layer configuration, the rationally designed sandwich-structured polymer nanocomposites are capable of integrating the complementary properties of spatially organized multicomponents in a synergistic fashion to raise dielectric constant, and subsequently greatly improve discharged energy densities while retaining low loss and high charge–discharge efficiency at elevated temperatures. At 150 °C and 200 MV m−1, an operating condition toward electric vehicle applications, the sandwich-structured polymer nanocomposites outperform the state-of-the-art polymer-based dielectrics in terms of energy density, power density, charge–discharge efficiency, and cyclability. The excellent dielectric and capacitive properties of the polymer nanocomposites may pave a way for widespread applications in modern electronics and power modules where harsh operating conditions are present.

Materials Research for High Energy Density Electrochemical Capacitor

2008 ◽  
Vol 1100 ◽  
Author(s):  
Andrew F. Burke
Keyword(s):  
Energy Storage ◽  
Energy Density ◽  
Dielectric Materials ◽  
High Energy ◽  
Cycle Life ◽  
High Energy Density ◽  
Capacitive Energy Storage ◽  
High Electronic Conductivity ◽  
Materials Research ◽  
Power Capability

AbstractIn April 2007, the Office of Basic Energy Science, United States Department of Energy organized and conducted a Basic Energy Sciences Workshop for Electrical Energy Storage at which basic research needs for capacitive energy storage were considered in detail. This paper is intended to highlight the materials research findings/needs of the workshop and to relate them to the development of high energy density capacitors that can have an energy density approaching that of lead acid batteries, a power density greater than that of lithium ion batteries, and cycle life approaching that of carbon/carbon double-layer capacitors. Capacitors inherently have long cycle life and high power capability so the key issue is how to increase their energy density with minimum sacrifice of their inherent cycle life and power advantages. This requires the development of electrode charge storage materials with an effective high specific capacitance (F/g) and high electronic conductivity. The most promising electrode materials appear to be optimized activated carbons, graphitic carbons, nanotube carbons, and metal oxides. Cells can be assembled that utilize one of these materials in the one electrode and another of the material in the other electrode. Such hybrid cells can operate at 3-4V using organic electrolytes and potentially can have energy densities of 15-25 Wh/kg. Initial research is also underway on solid-state, high energy density devices utilizing high dielectric materials (K>15000) which would operate at very high cell voltage. If such dielectric materials can be developed, these devices may have energy densities approaching those of lithium batteries.

Ultrahigh Charge-discharge Efficiency and High Energy Density of High-temperature Polymer Sandwiched

2021 ◽  
Author(s):  
Hanxi Chen ◽  
Zhongbin Pan ◽  
Yu Cheng ◽  
Xiangping Ding ◽  
Jinjun Liu ◽  
...  
Keyword(s):  
High Temperature ◽  
Energy Density ◽  
Elevated Temperatures ◽  
Dielectric Materials ◽  
High Energy ◽  
High Energy Density ◽  
Capacitive Energy Storage ◽  
New Generation ◽  
Discharge Efficiency ◽  
Charge Discharge

A new generation of high-temperature dielectric materials toward capacitive energy storage is highly demanded as power electronics are always exposed to elevated temperatures in high-power applications. Polymer dielectric materials, an...

Benzoxazole-polymer@CCTO hybrid nanoparticles prepared via RAFT polymerization: toward poly(p-phenylene benzobisoxazole) nanocomposites with enhanced high-temperature dielectric properties

2021 ◽  
Author(s):  
Junhao Jiang ◽  
Jinpeng Li ◽  
Jun Qian ◽  
Xiaoyun Liu ◽  
Peiyuan Zuo ◽  
...  
Keyword(s):  
High Temperature ◽  
Dielectric Properties ◽  
Energy Density ◽  
Polymer Nanocomposites ◽  
Raft Polymerization ◽  
Dielectric Materials ◽  
High Energy ◽  
High Energy Density ◽  
Hybrid Nanoparticles

Polymer nanocomposites with high energy density have become a research hotspot in the field of dielectric materials. However, the huge compatibility contrast between nanofillers and polymers always hinders the further...

Sign in / Sign up

Export Citation Format

Share Document