scholarly journals Mechanical Performance of Reclaimed Asphalt Pavement Modified with Waste Frying Oil and Crumb Rubber

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2781
Author(s):  
Munder Bilema ◽  
Mohamad Yusri Aman ◽  
Norhidayah Abdul Hassan ◽  
Zubair Ahmed Memon ◽  
Hend Ali Omar ◽  
...  
Keyword(s):  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Moisture Damage ◽  
Crumb Rubber ◽  
Asphalt Mixtures ◽  
Reclaimed Asphalt Pavement ◽  
Waste Frying Oil ◽  
Rutting Resistance ◽  
Reclaimed Asphalt

Researchers are exploring the utilisation of reclaimed asphalt pavement (RAP) as a recycled material to determine the performance of non-renewable natural aggregates and other road products such as asphalt binder, in the construction and rehabilitation stage of asphalt pavements. The addition of RAP in asphalt mixtures is a complex process and there is a need to understand the design of the asphalt mixture. Some of the problems associated with adding RAP to asphalt mixtures are moisture damage and cracking damage caused by poor adhesion between the aggregates and asphalt binder. There is a need to add rejuvenators to the recycled mixture containing RAP to enhance its performance, excepting the rutting resistance. This study sought to improve asphalt mixture performance and mechanism by adding waste frying oil (WFO) and crumb rubber (CR) to 25 and 40% of the RAP content. Moreover, the utilisation of CR and WFO improved pavement sustainability and rutting performance. In addition, this study prepared five asphalt mixture samples and compared their stiffness, moisture damage and rutting resistance with the virgin asphalt. The results showed enhanced stiffness and rutting resistance of the RAP but lower moisture resistance. The addition of WFO and CR restored the RAP properties and produced rutting resistance, moisture damage and stiffness, which were comparable to the virgin asphalt mixture. All waste and virgin materials produce homogeneous asphalt mixtures, which influence the asphalt mixture performance. The addition of a high amount of WFO and a small amount of CR enhanced pavement sustainability and rutting performance.

THE EFFECT OF INCORPORATING RECLAIMED ASPHALT PAVEMENT ON THE PERFORMANCE OF HOT MIX ASPHALT MIXTURES

2015 ◽  
Vol 77 (32) ◽  
Author(s):  
Mohd Khairul Idham ◽  
Mohd Rosli Hainin
Keyword(s):  
Resilient Modulus ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Aggregate Size ◽  
Asphalt Mixtures ◽  
Maximum Aggregate Size ◽  
Reclaimed Asphalt Pavement ◽  
Optimum Amount ◽  
Rutting Resistance ◽  
Reclaimed Asphalt

In pavement industries, incorporating appropriate amount of reclaimed asphalt pavement (RAP) in the fresh mixtures is one of the approaches to attain sustainable principle in construction. Usage RAP materials have been practiced since 1970s, however, pavements made with RAP will reach the end of service life and need to be recycled again. Only a few studies done on the second recycle of RAP (R2AP). Therefore, this paper aimed to investigate the effect of incorporating RAP and R2AP in the asphalt mixture. RAP was collected from in-service road which was exposed to the environment and traffic for seven years. While, the second cycle of RAP (R2AP) was obtained through the laboratory aging process.  20, 40, and 60 % of RAP and R2AP were mixed with fresh dense graded aggregates to form Asphaltic Concrete with 14 mm nominal maximum aggregate size (AC 14). Resilient modulus test was performed to evaluate the performance on rutting resistance. Tensile strength was also evaluated at 25 °C as an indicator for fatigue resistance. 60 % of RAP and 40 % of R2AP are observed to the best optimum amount to be added in the fresh mixture in order to improve both fatigue and rutting resistance.

scholarly journals Effects of Waste Frying Oil and Crumb Rubber on the Characteristics of a Reclaimed Asphalt Pavement Binder

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3482
Author(s):  
Munder Bilema ◽  
Mohamad Yusri Aman ◽  
Norhidayah Abdul Hassan ◽  
Zaid Al-Saffar ◽  
Nuha S. Mashaan ◽  
...  
Keyword(s):  
Asphalt Pavement ◽  
Control Sample ◽  
Crumb Rubber ◽  
Frying Oil ◽  
Waste Materials ◽  
Reclaimed Asphalt Pavement ◽  
Waste Frying Oil ◽  
Rutting Resistance ◽  
Reclaimed Asphalt ◽  
Bituminous Binders

The reclaimed asphalt pavement (RAP) has become a moderately common practice in most countries; Hence, rejuvenating materials with RAP have earned publicity in the asphalt manufacturers, mainly due to the increasing raw material costs. In this study, the crumb rubber (CR) and waste frying oil (WFO) utilized as waste materials to restore the properties and enhance the rutting resistance of the RAP. Several physical, rheological, chemical properties of bituminous binders were tested. The result showed that the RAP bituminous binders incorporating WFO and CR decreased softening points and the increased penetration value; these translate to an increase in penetration index. Moreover, the viscosity of the WFO/CR combination reclaimed asphalt pavement binder showed better workability and stiffness, as well as a low storage stability temperature (less than 2.2 °C) with an acceptable loss upon heating. Without chemical reaction was observed between the waste-frying oil with the rubberized binder and the reclaimed asphalt pavement binder. Additionally, the WFO/CR rheological properties combined with the reclaimed asphalt pavement binder were comparable to the control sample. The incorporation of CR with WFO as a hybrid rejuvenator enhanced the rutting resistance. Therefore, the presence of WFO/CR has a considerable influence on the RAP binder properties while preserving a better environment and reducing pollution by reusing waste materials.

Laboratory investigation of engineering properties of rubberized asphalt mixtures containing reclaimed asphalt pavement

2010 ◽  
Vol 37 (11) ◽  
pp. 1414-1422 ◽  
Author(s):  
Feipeng Xiao ◽  
Serji Amirkhanian ◽  
Bradley Putman ◽  
Junan Shen
Keyword(s):  
Resilient Modulus ◽  
Asphalt Pavement ◽  
Crumb Rubber ◽  
Asphalt Mixtures ◽  
Engineering Properties ◽  
Reclaimed Asphalt Pavement ◽  
Reclaimed Asphalt ◽  
The Us ◽  
Rubberized Asphalt Concrete ◽  
Environmentally Sound

An improved understanding of the rheological and engineering properties of a rubberized asphalt concrete (RAC) pavement that contains reclaimed asphalt pavement (RAP) is important to stimulating the use of these recycled and by-product materials in asphalt mixtures. The uses of RAP and rubberized asphalt in the past have proven to be economical, environmentally sound, and effective in hot mix asphalt (HMA) mixtures across the US and the world. The objective of this research was to investigate the binder and mixture performance characteristics of these modified asphalt mixtures through a series of laboratory tests to evaluate properties such as the fatigue factor G*sinδ, rutting resistance, resilient modulus, and fatigue life. The results of the experiments indicated that the use of RAP and crumb rubber in HMA can effectively improve the engineering properties of these mixes.

Rejuvenator Influence on Aged Binder Material Properties

2017 ◽  
Vol 730 ◽  
pp. 380-388 ◽  
Author(s):  
Michal Varaus ◽  
Tomas Koudelka ◽  
Pavel Sperka
Keyword(s):  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Asphalt Mixtures ◽  
Reclaimed Asphalt Pavement ◽  
Optimum Amount ◽  
Bending Beam Rheometer ◽  
Reclaimed Asphalt ◽  
Binder Material ◽  
Aged Binder ◽  
Ball Test

As the amount of reclaimed asphalt pavement (RAP) material used in asphalt mixtures has increased recently, it is vital to address problems regarding aged binder incorporated in RAP. Asphalt binder hardens during its production process as well as during service life of pavements. External influences such as oxygen and ultraviolet radiation affect greatly bitumen characteristics. Thanks to adding rejuvenating agents, the original binder properties should be recovered and resulting asphalt binder parameters should become equal to those measured upon the reference material. In this study, four different rejuvenator agents and one neat soft binder were employed to rejuvenate the artificially aged binder by a complete blending between both constituents. Thereafter, empirical as well as performance based binder properties were examined with a dynamic shear rheometer (DSR) and with a bending beam rheometer (BBR). Three different dosages of each rejuvenator were added to evaluate the required amount for the original binder properties to be restored. Moreover, the softening efficiency of each agent was assessed by means of the Ring and Ball test. Finally, the optimum amount of each rejuvenator needed for the blend to achieve the target specification was determined. It can be concluded that the rejuvenators affect binder properties greatly, and mainly in a positive way. However, the data also indicate significant discrepancies between the types of the rejuvenator.

scholarly journals Desempenho de misturas asfálticas recicladas mornas e sua influência no dimensionamento do revestimento asfáltico

2020 ◽  
Vol 41 (2) ◽  
pp. 157
Author(s):  
Fernanda Gadler ◽  
Leonardo Fagundes Rosemback Miranda ◽  
Joe Villena
Keyword(s):  
Resilient Modulus ◽  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Binder Content ◽  
Asphalt Mixtures ◽  
Recycled Concrete ◽  
Concrete Aggregate ◽  
Reclaimed Asphalt Pavement ◽  
Recycled Concrete Aggregate ◽  
Reclaimed Asphalt

The main purpose is to evaluate the performance of asphalt regarding resilient modulus and fatigue curve.The asphalt was produced with two wastes, reclaimed asphalt pavement (RAP) and recycled concrete aggregate (RCA), using the technique of warm mixtures. The evaluation includes, based on these parameters, the thickness differences in the design of asphalt layer for each mixture. Five asphalt mixtures were produced with incorporation of RAP and RCA, in different gradation fractions (fine and/or course), without adding any natural aggregate. In view of the aim of the article, the mixtures were evaluated through tests of resilient modulus and fatigue life, in order to support the design, establishing the necessary thickness to meet traffic demands of each mixture. The design was performed using MeDiNa software. Among all results, it is highlighted that asphalt binder content is the component that exerts the greatest influence on the resilient modulus of the mixtures. As for fatigue, in addition to the binder content, the possible anchoring of the asphalt binder in the pores of the RCA may have favored the performance of the GARC_MRAP mixture. Still, all mixtures with RAP, both in fine or course fraction, resulted in lower coating thicknesses compared to the REF, for the same load request, with better performance of the GARC_MRAP mixture produced with 100 % waste material and incorporation of only 3.1 % neat binder.

Detection of Reclaimed Asphalt Pavement Presence in Asphalt Mixtures Using a Method of Successive Asphalt Binder Extraction

2021 ◽  
Vol 904 ◽  
pp. 458-463
Author(s):  
Jiří Sachr ◽  
Ondrej Dasek ◽  
Petr Hyzl
Keyword(s):  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Asphalt Mixtures ◽  
Reclaimed Asphalt Pavement ◽  
Reclaimed Asphalt ◽  
Needle Penetration ◽  
Successive Extraction ◽  
Complex Shear ◽  
Empirical Tests ◽  
Aged Binder

The work deals with the detection of presence of RAP (reclaimed asphalt pavement) in asphalt mixtures. Information about the presence of RAP in an asphalt layer can be technically advantageous, for example, when planning further recycling of the layer. The method described in the paper can also be used to verify the success of a treatment of an aged binder in RAP, which is dosed in the production of new asphalt mixtures. The asphalt binder was obtained by a method of successive extraction from asphalt mixtures with different RAP content. Basic empirical tests of the asphalt binder (needle penetration and softening point) were chosen to detect the presence of RAP. The complex shear modulus G* was further determined on the extracted binders using a dynamic shear rheometer (DSR).

scholarly journals The Effect of Aging on the Cracking Resistance of Recycled Asphalt

2017 ◽  
Vol 2017 ◽  
pp. 1-7 ◽  
Author(s):  
Mojtaba Mohammadafzali ◽  
Hesham Ali ◽  
James A. Musselman ◽  
Gregory A. Sholar ◽  
Aidin Massahi
Keyword(s):  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Fatigue Cracking ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Reclaimed Asphalt Pavement ◽  
Cracking Resistance ◽  
Recycled Asphalt ◽  
Reclaimed Asphalt ◽  
Important Concern

Fatigue cracking is an important concern when a high percentage of Reclaimed Asphalt Pavement (RAP) is used in an asphalt mixture. The aging of the asphalt binder reduces its ductility and makes the pavement more susceptible to cracking. Rejuvenators are often added to high-RAP mixtures to enhance their performance. The aging of a rejuvenated binder is different from virgin asphalt. Therefore, the effect of aging on a recycled asphalt mixture can be different from its effect on a new one. This study evaluated the cracking resistance of 100% recycled asphalt binders and mixtures and investigated the effect of aging on this performance parameter. The cracking resistance of the binder samples was tested by a Bending Beam Rheometer. An accelerated pavement weathering system was used to age the asphalt mixtures and their cracking resistance was evaluated by the Texas Overlay Test. The results from binder and mixture tests mutually indicated that rejuvenated asphalt has a significantly better cracking resistance than virgin asphalt. Rejuvenated mixtures generally aged more rapidly, and the rate of aging was different for different rejuvenators.

scholarly journals PERFORMANCE PREDICTION OF WARM MIX ASPHALT PAVEMENT CONTAINING RECLAIMED ASPHALT PAVEMENT IN RHODE ISLAND

2019 ◽  
Author(s):  
◽  
Neha Shrestha ◽  
Keyword(s):  
Surface Layer ◽  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Fatigue Cracking ◽  
Thermal Cracking ◽  
Creep Recovery ◽  
Reclaimed Asphalt Pavement ◽  
Cracking Resistance ◽  
Rutting Resistance ◽  
Reclaimed Asphalt

The warm mixed asphalt (WMA) technology has gained a lot of interests in the recent years in academia, state agencies and industries. WMA technology allows reductions in production and compaction temperatures guaranteeing relevant environmental and cost saving benefits. The purpose of the present study was to study and evaluate the performance of a typical additive in WMA pavement with Reclaimed Asphalt Pavement (RAP) on rutting, fatigue cracking and thermal cracking resistance on RI Route 102. In the present study, the asphalt binder was tested at different dosages of additive using Dynamic Shear Rheometer (DSR), Rolling Thin Film Oven (RTFO), Pressure Aging Vessel (PAV), Multiple Stress Creep Recovery (MSCR) and Bending Beam Rheometer (BBR). From the overall test, it was found that 0.7% additive would lessen pavement damage due to rutting, fatigue cracking and thermal cracking. Based on the results of binder test, Hot Mix Asphalt (HMA) and WMA specimens containing 20 % RAP were prepared using PG 58-28 asphalt binder and Superpave Gyratory Compactor (SGC). From the volumetric analysis of both HMA and WMA specimens, it was determined that the optimum binder content (OBC) for HMA with 20% RAP was 5.3 percent and the OBC for WMA (0.7% additive with RAP was 5.6%. It was found that the required amount of neat regular asphalt binder for WMA specimen was higher than the one required by HMA. HMA and WMA Specimens with each containing 20% RAP were prepared at OBC and indirect tensile (IDT) strength test were conducted on that specimen. The test indicated that the performance of HMA mixtures was better than WMA with same amount of RAP. RI Route 102 was used as case study in this research study. Route 102 was rehabilitated through Full Depth Reclamation (FDR) in 2015. First half road of RI Route 102 was built with HMA base and surface layer and the other half was built with WMA base and surface layer using a typical additive. It was found that both sections have similar value in Pavement Serviceability Index (PSI) and in International Roughness Index (IRI) at this time. Four specimens were prepared to predict the performance of asphalt pavement using the dynamic modulus and the master curve. Two HMA specimens each were prepared with and without RAP. Similarly, other two WMA specimens were prepared with and without RAP. These four specimens were tested with the Asphalt Mixture Performance Tester (AMPT) machine and developed the master curves for each specimen. The results of the material testing were used to predict the performance of each test sections by using AASHTOWare Pavement ME Design (PavementME) software. It was found that the WMA-RAP performed better in fatigue cracking resistance but was found to perform poor in rutting resistance than HMA and HMA-RAP. This indicated that fatigue cracking was not a problem with WMA-RAP mixtures whereas rutting resistance still requires further investigation and improvement.

Relationships among Chemistry, Rheology, and Fracture/Fatigue Performance of Recovered Asphalt Binders and Asphalt Mixtures Containing Reclaimed Asphalt Pavement

2020 ◽  
Vol 2674 (10) ◽  
pp. 927-938
Author(s):  
Peyman Barghabany ◽  
Wei Cao ◽  
Louay N. Mohammad ◽  
Samuel B. Cooper ◽  
Samuel B. Cooper
Keyword(s):  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Intermediate Temperature ◽  
Asphalt Binders ◽  
Rheological Parameters ◽  
Cracking Resistance ◽  
Reclaimed Asphalt ◽  
Four Point Bending

Because of limited amounts of natural resources, reclaimed asphalt pavement (RAP) has gained popularity in the asphalt pavement industry to meet sustainability requirements in asphalt pavement. Concerns have been raised in relation to the intermediate temperature cracking performance of asphalt mixtures containing RAP. The objective of this study was to evaluate the intermediate temperature cracking resistance of asphalt mixtures and recovered asphalt binders containing RAP. Seven plant-produced asphalt mixtures from three transportation agencies with various RAP contents and the extracted asphalt binders were evaluated with respect to intermediate temperature cracking resistance. Asphalt binder experiments included chemical and rheological characterization of recovered asphalt binders. Chemical characterization consisted of Fourier transform infrared spectroscopy and saturates/aromatics/resins/asphaltenes component analysis. Linear amplitude sweep and time sweep tests were also performed to characterize the rheological properties of asphalt binders. Asphalt mixture experiments included four-point bending beam fatigue and semi-circular bend tests. Results indicated that, as expected, asphalt mixtures with high RAP contents resulted in asphalt binders and mixtures with reduced cracking resistance. Relationships between the asphalt binder chemical and rheological parameters and asphalt mixture cracking resistance were also investigated. Asphalt binder rheological and chemical parameters were well correlated. Asphalt binder rheological parameters showed reasonable to strong relationships with the four-point bending beam fatigue test result. The work presented in this paper is part of FHWA Transportation Pooled Fund Project TPF-5(294) “Develop Mix Design and Analysis Procedure for Asphalt Mixtures Containing High RAP and/or RAS Contents.”

Sign in / Sign up

Export Citation Format

Share Document