scholarly journals Combined Manufacturing Process of Copper Electrodes for Micro Texturing Applications (AMSME)

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2497
Author(s):  
Carlos J. Sánchez ◽  
Pedro M. Hernández ◽  
María D. Martínez ◽  
María D. Marrero ◽  
Jorge Salguero
Keyword(s):  
Additive Manufacturing ◽  
Surface Texturing ◽  
Surface Finishing ◽  
Minimum Thickness ◽  
Laboratory Equipment ◽  
Digital Light Processing ◽  
Copper Electrodes ◽  
Electro Discharge Machining ◽  
Detailed Surface ◽  
Made In

Surface texturing has brought significant improvements in the functional properties of parts and components. Sinker electro discharge machining (SEDM) is one of the processes which generates great texturing results at different scale. An electrode is needed to reproduce the geometry to be textured. Some geometries are difficult or impossible to achieve on an electrode using conventional and even unconventional machining methods. This work sets out the advances made in the manufacturing of copper electrodes for electro erosion by additive manufacturing, and their subsequent application to the functional texturing of Al-Cu UNS A92024-T3 alloy. A combined procedure of digital light processing (DLP) additive manufacturing, sputtering and micro-electroforming (AMSME), has been used to produce electrodes. Also, a specific laboratory equipment has been developed to reproduce details on a microscopic scale. Shells with outgoing spherical geometries pattern have been manufactured. AMSME process has shown ability to copper electrodes manufacturing. A highly detailed surface on a micrometric scale have been achieved. Copper shells with minimum thickness close to 300 µm have been tested in sinker electro discharge machining (SEDM) and have been shown very good performance in surface finishing operations. The method has shown great potential for use in surfaces texturing.

scholarly journals Rapid fabrication of MOF-based mixed matrix membranes through digital light processing

2021 ◽  
Author(s):  
Alexey Pustovarenko ◽  
Beatriz Seoane ◽  
Edy Abou-Hamad ◽  
Helen E King ◽  
Bert Weckhuysen ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Processing Speed ◽  
Mixed Matrix Membranes ◽  
Scientific Interest ◽  
Mixed Matrix ◽  
Digital Light Processing ◽  
Additive Manufacturing Technology ◽  
Rapid Fabrication ◽  
Manufacturing Methods

3D printing, also known as additive manufacturing technology, has greatly expanded across multiple sectors of technology replacing classical manufacturing methods by combining processing speed and high precision. The scientific interest...

scholarly journals Gold, Silver, and Electrum Electroless Plating on Additively Manufactured Laser Powder-Bed Fusion AlSi10Mg Parts: A Review

Coatings ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 422
Author(s):  
Dana Ashkenazi ◽  
Alexandra Inberg ◽  
Yosi Shacham-Diamand ◽  
Adin Stern
Keyword(s):  
Additive Manufacturing ◽  
Low Cost ◽  
Ion Beam ◽  
Surface Finishing ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Finishing Process ◽  
Gold Silver ◽  
3D Printed

Additive manufacturing (AM) revolutionary technologies open new opportunities and challenges. They allow low-cost manufacturing of parts with complex geometries and short time-to-market of products that can be exclusively customized. Additive manufactured parts often need post-printing surface modification. This study aims to review novel environmental-friendly surface finishing process of 3D-printed AlSi10Mg parts by electroless deposition of gold, silver, and gold–silver alloy (e.g., electrum) and to propose a full process methodology suitable for effective metallization. This deposition technique is simple and low cost method, allowing the metallization of both conductive and insulating materials. The AlSi10Mg parts were produced by the additive manufacturing laser powder bed fusion (AM-LPBF) process. Gold, silver, and their alloys were chosen as coatings due to their esthetic appearance, good corrosion resistance, and excellent electrical and thermal conductivity. The metals were deposited on 3D-printed disk-shaped specimens at 80 and 90 °C using a dedicated surface activation method where special functionalization of the printed AlSi10Mg was performed to assure a uniform catalytic surface yielding a good adhesion of the deposited metal to the substrate. Various methods were used to examine the coating quality, including light microscopy, optical profilometry, XRD, X-ray fluorescence, SEM–energy-dispersive spectroscopy (EDS), focused ion beam (FIB)-SEM, and XPS analyses. The results indicate that the developed coatings yield satisfactory quality, and the suggested surface finishing process can be used for many AM products and applications.

Optimal space filling for additive manufacturing

2016 ◽  
Vol 22 (4) ◽  
pp. 660-675 ◽  
Author(s):  
Sajan Kapil ◽  
Prathamesh Joshi ◽  
Hari Vithasth Yagani ◽  
Dhirendra Rana ◽  
Pravin Milind Kulkarni ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Manufacturing Process ◽  
Layered Manufacturing ◽  
Closed Curve ◽  
Numerical Control ◽  
Surface Finishing ◽  
Content Type ◽  
Single Pass ◽  
Connected Area ◽  
Area Filling

Purpose In additive manufacturing (AM) process, the physical properties of the products made by fractal toolpaths are better as compared to those made by conventional toolpaths. Also, it is desirable to minimize the number of tool retractions. The purpose of this study is to describe three different methods to generate fractal-based computer numerical control (CNC) toolpath for area filling of a closed curve with minimum or zero tool retractions. Design/methodology/approach This work describes three different methods to generate fractal-based CNC toolpath for area filling of a closed curve with minimum or zero tool retractions. In the first method, a large fractal square is placed over the outer boundary and then rest of the unwanted curve is trimmed out. To reduce the number of retractions, ends of the trimmed toolpath are connected in such a way that overlapping within the existing toolpath is avoided. In the second method, the trimming of the fractal is similar to the first method but the ends of trimmed toolpath are connected such that the overlapping is found at the boundaries only. The toolpath in the third method is a combination of fractal and zigzag curves. This toolpath is capable of filling a given connected area in a single pass without any tool retraction and toolpath overlap within a tolerance value equal to stepover of the toolpath. Findings The generated toolpath has several applications in AM and constant Z-height surface finishing. Experiments have been performed to verify the toolpath by depositing material by hybrid layered manufacturing process. Research limitations/implications Third toolpath method is suitable for the hybrid layered manufacturing process only because the toolpath overlapping tolerance may not be enough for other AM processes. Originality/value Development of a CNC toolpath for AM specifically hybrid layered manufacturing which can completely fill any arbitrary connected area in single pass while maintaining a constant stepover.

Manufacture of Lenses and Diffraction Gratings Using DLP As an Additive Manufacturing Technology

2018 ◽  
Author(s):  
Laura Daniela Vallejo Melgarejo ◽  
Jose García ◽  
Ronald G. Reifenberger ◽  
Brittany Newell
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Diffraction Grating ◽  
Diffraction Gratings ◽  
Optical Microscope ◽  
Manufacturing Technology ◽  
Manufacturing Processes ◽  
Digital Light Processing ◽  
Additive Manufacturing Technology ◽  
Potential Use

This document condenses the results obtained when 3D printing lenses and their potential use as diffraction gratings using Digital Light Processing (DLP), as an additive manufacturing technique. This project investigated the feasibility of using DLP additive manufacturing for producing custom designed lenses and gratings. DLP was identified as the preferred manufacturing technology for gratings fabrication. Diffraction gratings take advantage of the anisotropy, inherent in additive manufacturing processes, to produce a collated pattern of multiple fringes on a substrate with completely smooth surfaces. The gratings are transmissive and were manufactured with slit separations of 10, 25 and 50 μm. More than 50 samples were printed at various build angles and mechanically treated for maximum optical transparency. The variables of the irradiance equation were obtained from photographs taken with an optical microscope. These values were used to estimate theoretical irradiance patterns of a diffraction grating and compared against the experimental 3-D printed grating. The resulting patterns were found to be remarkably similar in amplitude and distance between peaks when compared to theoretical values.

scholarly journals Study of Physical and Degradation Properties of 3D-Printed Biodegradable, Photocurable Copolymers, PGSA-co-PEGDA and PGSA-co-PCLDA

Polymers ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1263 ◽  
Author(s):  
June-Yo Chen ◽  
Joanne Hwang ◽  
Wai-Sam Ao-Ieong ◽  
Yung-Che Lin ◽  
Yi-Kong Hsieh ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Weight Ratio ◽  
Polymeric Materials ◽  
Pure Substance ◽  
Digital Light Processing ◽  
Glycol Diacrylate ◽  
Young’S Moduli ◽  
Potential Applications ◽  
Degradation Properties

As acrylated polymers become more widely used in additive manufacturing, their potential applications toward biomedicine also raise the demand for biodegradable, photocurable polymeric materials. Polycaprolactone diacrylate (PCLDA) and poly(ethylene glycol) diacrylate (PEGDA) are two popular choices of materials for stereolithography (SLA) and digital light processing additive manufacturing (DLP-AM), and have been applied to many biomedical related research. However, both materials are known to degrade at a relatively low rate in vivo, limiting their applications in biomedical engineering. In this work, biodegradable, photocurable copolymers are introduced by copolymerizing PCLDA and/or PEGDA with poly(glycerol sebacate) acrylate (PGSA) to form a network polymer. Two main factors are discussed: the effect of degree of acrylation in PGSA and the weight ratio between the prepolymers toward the mechanical and degradation properties. It is found that by blending prepolymers with various degree of acrylation and at various weight ratios, the viscosity of the prepolymers remains stable, and are even more 3D printable than pure substances. The formation of various copolymers yielded a database with selectable Young’s moduli between 0.67–10.54 MPa, and the overall degradation rate was significantly higher than pure substance. In addition, it is shown that copolymers fabricated by DLP-AM fabrication presents higher mechanical strength than those fabricated via direct UV exposure. With the tunable mechanical and degradation properties, the photocurable, biodegradable copolymers are expected to enable a wider application of additive manufacturing toward tissue engineering.

In Implementing a Metal 3D AM Machine

2018 ◽  
Vol 786 ◽  
pp. 356-363
Author(s):  
Tero Jokelainen ◽  
Kimmo Mäkelä ◽  
Aappo Mustakangas ◽  
Jari Mäkelä ◽  
Kari Mäntyjärvi
Keyword(s):  
Additive Manufacturing ◽  
Selective Laser Melting ◽  
Dimensional Accuracy ◽  
Acceptance Test ◽  
Aisi 316L ◽  
Laser Melting ◽  
Geometrical Accuracy ◽  
Machine Performance ◽  
Geometrical Features ◽  
Made In

Additive Manufacturing (AM) does not yet have a standardized way to measure performance. Here a AM machines dimensional accuracy is measured trough acceptance test (AT) and AM machines capability is tested trough test parts. Test parts are created with specific geometrical features using a 3D AM machine. Performance of the machine is then evaluated trough accuracy of test parts geometry. AM machine here uses selective laser melting (SLM) process. This machine has done Factory acceptance test (FAT) to ascertain this machine ́s geometrical accuracy with material AISI 316L. Manufacturer promises accuracy of ±0.05 mm. These parts are used as comparison to AT parts made in this study. After installation two AT parts are manufactured with AM machine. One with AISI 316L and one AlSi10Mg. Dimensional accuracy of geometrical features on these parts are then compared to FAT part and to one another. Machines capability is measured trough two test parts done with material AlSi10Mg. Two of the test parts are done at the same time using same model as the FAT. Parts are printed without supports and with features facing same directions. Features of these parts were then evaluated. Another test to find out AM machines capability was to create part consisting of pipes doing 90˚ angle resulting in horizontal and vertical holes. Dimensional accuracy and circularity of holes was measured. Through these tests machines capability is benchmarked.

scholarly journals Impact of Honeycomb Polylactide Infill% in FDM Printed PLA/Nylon for Improved Mechanical Properties

2020 ◽  
Vol 8 (5) ◽  
pp. 3662-3668
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Conventional Process ◽  
Improved Accuracy ◽  
Made In

In conventional manufacturing procedures liable upon the forces acting on the materials may lead to breakage during motion of the part undergoing construct which is inevitable to no change its shape and position. In pretty much every case, materials have anisotropic by its nature and virtue. As additive manufacturing (AM) techniques embedded undergoing processes with improved accuracy of the parts being developed. Since there is far disadvantage of the quality of the AM product, constantly improvements made the process of AM is being escalating than conventional process. The assessment of the product and the complexity of the parts can’t be resolved or found before it developing a methodology which impact mechanical properties of the printed parts. An effort has been made in the present work to improve the products mechanical properties by increasing the infill percentage. Study has been carried out as in view of increased infill with elaborated percentages of 15%, 30%, 40% and 50% to enhance the mechanical properties of the parts.

Hybrid Metal 3D Printing for Selective Polished Surface

2021 ◽  
Vol 1027 ◽  
pp. 136-140
Author(s):  
Sze Yi Mak ◽  
Kwong Leong Tam ◽  
Ching Hang Bob Yung ◽  
Wing Fung Edmond Yau
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Surface Finishing ◽  
Polished Surface ◽  
Post Processing ◽  
One Stop ◽  
Metal 3D Printing ◽  
Critical Challenge ◽  
Metal Additive

Metal additive manufacturing has found broad applications in diverse disciplines. Post processing to homogenize and improve surface finishing remains a critical challenge to additive manufacturing. We propose a novel one-stop solution of adopting hybrid metal 3D printing to streamlining the additive manufacturing workflow as well as to improve surface roughness quality of selective interior surface of the printed parts. This work has great potential in medical and aerospace industries where complicated and high-precision additive manufacturing is anticipated.

scholarly journals DLP 3D Printing Meets Lignocellulosic Biopolymers: Carboxymethyl Cellulose Inks for 3D Biocompatible Hydrogels

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1655 ◽  
Author(s):  
Giuseppe Melilli ◽  
Irene Carmagnola ◽  
Chiara Tonda-Turo ◽  
Fabrizio Pirri ◽  
Gianluca Ciardelli ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Carboxymethyl Cellulose ◽  
Biomedical Applications ◽  
Digital Light Processing ◽  
Chemically Modified ◽  
Significant Step ◽  
3D Printed ◽  
Biomedical Field

The development of new bio-based inks is a stringent request for the expansion of additive manufacturing towards the development of 3D-printed biocompatible hydrogels. Herein, methacrylated carboxymethyl cellulose (M-CMC) is investigated as a bio-based photocurable ink for digital light processing (DLP) 3D printing. CMC is chemically modified using methacrylic anhydride. Successful methacrylation is confirmed by 1H NMR and FTIR spectroscopy. Aqueous formulations based on M-CMC/lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) photoinitiator and M-CMC/Dulbecco’s Modified Eagle Medium (DMEM)/LAP show high photoreactivity upon UV irradiation as confirmed by photorheology and FTIR. The same formulations can be easily 3D-printed through a DLP apparatus to produce 3D shaped hydrogels with excellent swelling ability and mechanical properties. Envisaging the application of the hydrogels in the biomedical field, cytotoxicity is also evaluated. The light-induced printing of cellulose-based hydrogels represents a significant step forward in the production of new DLP inks suitable for biomedical applications.

Sign in / Sign up

Export Citation Format

Share Document