scholarly journals MoS2/h-BN/Graphene Heterostructure and Plasmonic Effect for Self-Powering Photodetector: A Review

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1672
Author(s):  
Umahwathy Sundararaju ◽  
Muhammad Aniq Shazni Mohammad Haniff ◽  
Pin Jern Ker ◽  
P. Susthitha Menon
Keyword(s):  
Flexible Electronics ◽  
Hexagonal Boron Nitride ◽  
2D Materials ◽  
Optical Power ◽  
Active Regions ◽  
Green Technology ◽  
Plasmonic Effect ◽  
Zero Bias ◽  
Electrical Signals ◽  
Self Powered

A photodetector converts optical signals to detectable electrical signals. Lately, self-powered photodetectors have been widely studied because of their advantages in device miniaturization and low power consumption, which make them preferable in various applications, especially those related to green technology and flexible electronics. Since self-powered photodetectors do not have an external power supply at zero bias, it is important to ensure that the built-in potential in the device produces a sufficiently thick depletion region that efficiently sweeps the carriers across the junction, resulting in detectable electrical signals even at very low-optical power signals. Therefore, two-dimensional (2D) materials are explored as an alternative to silicon-based active regions in the photodetector. In addition, plasmonic effects coupled with self-powered photodetectors will further enhance light absorption and scattering, which contribute to the improvement of the device’s photocurrent generation. Hence, this review focuses on the employment of 2D materials such as graphene and molybdenum disulfide (MoS2) with the insertion of hexagonal boron nitride (h-BN) and plasmonic nanoparticles. All these approaches have shown performance improvement of photodetectors for self-powering applications. A comprehensive analysis encompassing 2D material characterization, theoretical and numerical modelling, device physics, fabrication and characterization of photodetectors with graphene/MoS2 and graphene/h-BN/MoS2 heterostructures with plasmonic effect is presented with potential leads to new research opportunities.

scholarly journals Chlorosulfuric acid-assisted production of functional 2D materials

2021 ◽  
Vol 5 (1) ◽  
Author(s):  
Mohsen Moazzami Gudarzi ◽  
Maryana Asaad ◽  
Boyang Mao ◽  
Gergo Pinter ◽  
Jianqiang Guo ◽  
...  
Keyword(s):  
Hexagonal Boron Nitride ◽  
2D Materials ◽  
Real Life ◽  
Large Area ◽  
Polar Solvents ◽  
Aspect Ratios ◽  
Two Dimensional Materials ◽  
Liquid Phase Exfoliation

AbstractThe use of two-dimensional materials in bulk functional applications requires the ability to fabricate defect-free 2D sheets with large aspect ratios. Despite huge research efforts, current bulk exfoliation methods require a compromise between the quality of the final flakes and their lateral size, restricting the effectiveness of the product. In this work, we describe an intercalation-assisted exfoliation route, which allows the production of high-quality graphene, hexagonal boron nitride, and molybdenum disulfide 2D sheets with average aspect ratios 30 times larger than that obtained via conventional liquid-phase exfoliation. The combination of chlorosulfuric acid intercalation with in situ pyrene sulfonate functionalisation produces a suspension of thin large-area flakes, which are stable in various polar solvents. The described method is simple and requires no special laboratory conditions. We demonstrate that these suspensions can be used for fabrication of laminates and coatings with electrical properties suitable for a number of real-life applications.

Dynamic coordination of metal-alanine to control the multistimuli-responsiveness of self-powered polymer hydrogels

2021 ◽  
Author(s):  
Huan Chen ◽  
Jintao Jiang ◽  
Zhe Chen ◽  
Binjie Du ◽  
Chenghao Dai ◽  
...  
Keyword(s):  
Next Generation ◽  
Electrical Signals ◽  
Polymer Hydrogels ◽  
Dynamic Coordination ◽  
Smart Sensing ◽  
Self Powered

New self-powered hydrogels that reversibly change electrical signals in response to circumambient multistimuli are of interest for the development of the next-generation smart sensing devices. In this work, a new...

Monodispersed hierarchical ZnGa2O4 microflowers for self-powered solar-blind detection

2016 ◽  
Vol 4 (15) ◽  
pp. 3113-3118 ◽  
Author(s):  
Yue Teng ◽  
Le Xin Song ◽  
Wei Liu ◽  
Zhe Yuan Xu ◽  
Qing Shan Wang ◽  
...  
Keyword(s):  
Response Time ◽  
Bias Voltage ◽  
Dark Current ◽  
Blind Detection ◽  
Current Ratio ◽  
Zero Bias ◽  
Single Crystalline ◽  
Short Response Time ◽  
Solar Blind ◽  
Self Powered

We successfully synthesized ZnGa2O4 microflowers self-assembled by hexagonal single-crystalline nanopetals. The ZnGa2O4 crystal exhibits improved solar-blind detection performance such as short response time, large light to dark current ratio and high photocurrent stability under zero bias voltage.

Self Powered Flexible Electronics Based on Self Poled “Ferroelectretic” Nanogenerator

MRS Advances ◽  
2016 ◽  
Vol 1 (45) ◽  
pp. 3083-3088 ◽  
Author(s):  
Sujoy Kumar Ghosh ◽  
Dipankar Mandal
Keyword(s):  
Composite Film ◽  
Flexible Electronics ◽  
Light Emitting Diode ◽  
Open Circuit ◽  
Pvdf Film ◽  
Light Emitting ◽  
Single Finger ◽  
Finger Touch ◽  
Self Powered ◽  
Pure Pvdf

ABSTRACTA ferroelectric nanogenerator without any electric poling treatment has been realized by incorporation of ytterbium (Yb) salt incorporated porous PVDF composite film. The composite film compose of electroactive β- and γ-phases, demonstrates higher dielectric and ferroelectric polarization responses than pure PVDF film. The 3 V of open circuit voltage with 0.47 µW/cm2 power density was generated by the nanogenerator upon single finger touch. It can also operate capacitor and light emitting diode without any subsidiary batteries.

scholarly journals Highly efficient self-powered perovskite photodiode with an electron-blocking hole-transport NiOx layer

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Amir Muhammad Afzal ◽  
In-Gon Bae ◽  
Yushika Aggarwal ◽  
Jaewoo Park ◽  
Hye-Ryeon Jeong ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Bias Voltage ◽  
High Performance ◽  
Hole Transport ◽  
Transport Layer ◽  
Hole Transport Layer ◽  
Zero Bias ◽  
Decay Times ◽  
Order Of Magnitude ◽  
Self Powered

AbstractHybrid organic–inorganic perovskite materials provide noteworthy compact systems that could offer ground-breaking architectures for dynamic operations and advanced engineering in high-performance energy-harvesting optoelectronic devices. Here, we demonstrate a highly effective self-powered perovskite-based photodiode with an electron-blocking hole-transport layer (NiOx). A high value of responsivity (R = 360 mA W−1) with good detectivity (D = 2.1 × 1011 Jones) and external quantum efficiency (EQE = 76.5%) is achieved due to the excellent interface quality and suppression of the dark current at zero bias voltage owing to the NiOx layer, providing outcomes one order of magnitude higher than values currently in the literature. Meanwhile, the value of R is progressively increased to 428 mA W−1 with D = 3.6 × 1011 Jones and EQE = 77% at a bias voltage of − 1.0 V. With a diode model, we also attained a high value of the built-in potential with the NiOx layer, which is a direct signature of the improvement of the charge-selecting characteristics of the NiOx layer. We also observed fast rise and decay times of approximately 0.9 and 1.8 ms, respectively, at zero bias voltage. Hence, these astonishing results based on the perovskite active layer together with the charge-selective NiOx layer provide a platform on which to realise high-performance self-powered photodiode as well as energy-harvesting devices in the field of optoelectronics.

2D materials inks toward smart flexible electronics

2021 ◽  
Author(s):  
Oyawale Adetunji Moses ◽  
Libo Gao ◽  
Haitao Zhao ◽  
Zhuo Wang ◽  
Mukhtar Lawan Adam ◽  
...  
Keyword(s):  
Flexible Electronics ◽  
2D Materials

scholarly journals Nanogenerator-based dual-functional and self-powered thin patch loudspeaker or microphone for flexible electronics

2017 ◽  
Vol 8 (1) ◽  
Author(s):  
Wei Li ◽  
David Torres ◽  
Ramón Díaz ◽  
Zhengjun Wang ◽  
Changsheng Wu ◽  
...  
Keyword(s):  
Flexible Electronics ◽  
Dual Functional ◽  
Self Powered

scholarly journals Plasmonic 2D Materials: Overview, Advancements, Future Prospects and Functional Applications

2021 ◽  
Author(s):  
Muhammad Aamir Iqbal ◽  
Maria Malik ◽  
Wajeehah Shahid ◽  
Waqas Ahmad ◽  
Kossi A. A. Min-Dianey ◽  
...  
Keyword(s):  
Surface Plasmons ◽  
Light Emission ◽  
Hexagonal Boron Nitride ◽  
2D Materials ◽  
Optoelectronic Device ◽  
Two Dimensional ◽  
Graphene Oxides ◽  
Plasmonic Materials ◽  
Energy Applications ◽  
Device Applications

Plasmonics is a technologically advanced term in condensed matter physics that describes surface plasmon resonance where surface plasmons are collective electron oscillations confined at the dielectric-metal interface and these collective excitations exhibit profound plasmonic properties in conjunction with light interaction. Surface plasmons are based on nanomaterials and their structures; therefore, semiconductors, metals, and two-dimensional (2D) nanomaterials exhibit distinct plasmonic effects due to unique confinements. Recent technical breakthroughs in characterization and material manufacturing of two-dimensional ultra-thin materials have piqued the interest of the materials industry because of their extraordinary plasmonic enhanced characteristics. The 2D plasmonic materials have great potential for photonic and optoelectronic device applications owing to their ultra-thin and strong light-emission characteristics, such as; photovoltaics, transparent electrodes, and photodetectors. Also, the light-driven reactions of 2D plasmonic materials are environmentally benign and climate-friendly for future energy generations which makes them extremely appealing for energy applications. This chapter is aimed to cover recent advances in plasmonic 2D materials (graphene, graphene oxides, hexagonal boron nitride, pnictogens, MXenes, metal oxides, and non-metals) as well as their potential for applied applications, and is divided into several sections to elaborate recent theoretical and experimental developments along with potential in photonics and energy storage industries.

scholarly journals Adhesion and Mechanical Properties of PDMS-Based Materials Probed with AFM: A Review

2018 ◽  
Vol 56 (1) ◽  
pp. 62-78 ◽  
Author(s):  
S. Vlassov ◽  
S. Oras ◽  
M. Antsov ◽  
I. Sosnin ◽  
B. Polyakov ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Flexible Electronics ◽  
Food Industry ◽  
2D Materials ◽  
Organic Polymer ◽  
Adhesive Properties ◽  
Force Microscopy ◽  
Atomic Force ◽  
Dry Adhesives ◽  
Silicon Based

Abstract Polydimethylsiloxane (PDMS) is the most widely used silicon-based organic polymer, and is particularly known for its unusual rheological properties. PDMS has found extensive usage in various fields ranging from microfluidics and flexible electronics to cosmetics and food industry. In certain applications, like e.g. dry adhesives or dry transfer of 2D materials, adhesive properties of PDMS play crucial role. In this review we focus on probing the mechanical and adhesive properties of PDMS by means of atomic force microscopy (AFM). Main advantages and limitations of AFM-based measurements in comparison to macroscopic tests are discussed.

Sign in / Sign up

Export Citation Format

Share Document