scholarly journals High Capacity Nanocomposite Layers Based on Nanoparticles of Carbon Materials and Ruthenium Dioxide for Potassium Sensitive Electrode

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1308
Author(s):  
Nikola Lenar ◽  
Robert Piech ◽  
Beata Paczosa-Bator
Keyword(s):  
Contact Angle ◽  
Carbon Nanomaterials ◽  
Carbon Materials ◽  
Electrochemical Impedance ◽  
Electrochemical Techniques ◽  
High Capacity ◽  
Water Layer ◽  
Ruthenium Dioxide ◽  
Ion Selective Electrodes ◽  
Wide Range

This work presents the new concept of designing ion-selective electrodes based on the use of new composite materials consisting of carbon nanomaterials and ruthenium dioxide. Using two different materials varying in microstructure and properties, we could obtain one material for the mediation layer that adopted features coming of both components. Ruthenium dioxide characterized by high electrical capacity and mixed electronic-ionic transduction and nano-metric carbon materials were reportedly proved to improve the properties of ion-selective electrodes. Initially, only the materials and then the final electrodes were tested in the scope of the presented work, using scanning and transmission electron microscope, contact angle microscope, and various electrochemical techniques, including electrochemical impedance spectroscopy and chronopotentiometry. The obtained results confirmed beneficial influence of the designed nanocomposites on the ion-selective electrodes’ properties. Nanosized structure, high capacity (characterized by the electrical capacitance value from approximately 5.5 mF for GR + RuO2 and CB + RuO2, up to 14 mF for NT + RuO2) and low hydrophilicity (represented by the contact angle from 60° for GR+RuO2, 80° for CB+RuO2, and up to 100° for NT + RuO2) of the mediation layer materials, allowed us to obtain water layer-free potassium-selective electrodes, characterized by rapid and stable potentiometric response in a wide range of concentrations-from 10−1 to 10−6 M K+.

Evaluation of Ni0.5Zn0.5Fe2O4 nanoparticles as anti-corrosion pigment in organic coatings for carbon steel

2017 ◽  
Vol 64 (6) ◽  
pp. 644-653 ◽  
Author(s):  
A.U. Chaudhry ◽  
Vikas Mittal ◽  
M.I. Hashmi ◽  
Brajendra Mishra
Keyword(s):  
Carbon Steel ◽  
Electrochemical Impedance ◽  
Electrochemical Techniques ◽  
Open Circuit ◽  
Corrosion Layer ◽  
Organic Coatings ◽  
Metallic Oxide ◽  
Corrosion Properties ◽  
Content Type ◽  
Wide Range

Purpose Inorganic oxide addition can be synergistically beneficial in organic coatings if it can impart anti-corrosion properties and also act as an additive to enhance physical and/or chemical properties. The aim of this study was to evaluate the anti-corrosion benefits of nano nickel zinc ferrite (NZF) in the polymer film. Design/methodology/approach The time-dependent anti-corrosion ability of NZF (0.12-1.0 per cent w/w NZF/binder), applied on API 5L X-80 carbon steel, was characterized by electrochemical techniques such as open circuit potential, electrochemical impedance spectroscopy, linear polarization resistance and potentiodynamic. Characterization of corrosion layer was done by removing coatings after 216 h of immersion in 3.5 per cent w/v NaCl. Optical microscopy, field emission scanning electron microscopy and X-ray diffraction techniques were used to characterize the corroded surface. Findings Corrosion measurements confirm the electrochemical activity by metallic cations on the steel surface during corrosion process which results in improvement of anti-corrosion properties of steel. Moreover, surface techniques show compact corrosion layer coatings and presence of different metallic oxide phases for nanocomposite coatings. Originality/value The suggested protection mechanism was explained by the leaching and precipitation of metallic ion on the corroded surface which in turn slowed down the corrosion activity. Furthermore, improvement in barrier properties of rubber-based coatings was confirmed by the enhanced pore resistance. This work indicates that along with a wide range of applications of NZF, anti-corrosion properties can be taken as an addition.

scholarly journals Potentiometric Sensor with High Capacity Composite Composed of Ruthenium Dioxide and Poly(3,4-ethylenedioxythiophene) Polystyrene Sulfonate

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1891
Author(s):  
Nikola Lenar ◽  
Robert Piech ◽  
Beata Paczosa-Bator
Keyword(s):  
Composite Material ◽  
High Capacity ◽  
Contact Layer ◽  
Ruthenium Dioxide ◽  
Polystyrene Sulfonate ◽  
Electrical Capacitance ◽  
Great Performance ◽  
Wide Range ◽  
Electrical Capacity ◽  
First Time

This work presents the first-time application of the ruthenium dioxide–poly(3,4-ethylenedioxythiophene) polystyrene sulfonate high-capacity composite material as a mediation layer in potassium selective electrodes, which turned out to significantly enhance the electrical and analytical parameters of the electrodes. The idea was to combine the properties of two different types of materials: a conducting polymer, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate, and a metal oxide, ruthenium dioxide, in order to obtain the material for a solid-contact layer of great electrical and physicochemical parameters. The preparation method for composite material proposed in this work is fast and easy. The mediation layer material was examined using a scanning electron microscope and chronopotentiometry in order to confirm that all requirements for mediation layers materials were fulfilled. Ruthenium dioxide–poly(3,4-ethylenedioxythiophene) polystyrene sulfonate nancomposite material turned out to exhibit remarkably high electrical capacitance (of approximately 17.5 mF), which ensured great performance of designed K+-selective sensors. Electrodes of electrical capacity equal to 7.2 mF turned out to exhibit fast and stable (with only 0.077 mV potential change per hour) potentiometric responses in the wide range of potassium ion concentrations (10−6 M to 10−1 M). The electrical capacity of ruthenium dioxide–poly(3,4-ethylenedioxythiophene) polystyrene sulfonate-contacted electrodes characterized by electrical capacitance parameters was the highest reported so far for this type of sensor.

scholarly journals Electrochemical biosensors and nanobiosensors

2016 ◽  
Vol 60 (1) ◽  
pp. 69-80 ◽  
Author(s):  
Jules L. Hammond ◽  
Nello Formisano ◽  
Pedro Estrela ◽  
Sandro Carrara ◽  
Jan Tkac
Keyword(s):  
Electrochemical Sensors ◽  
Electrochemical Impedance ◽  
Low Cost ◽  
Electrochemical Techniques ◽  
Glucose Monitoring ◽  
Great Promise ◽  
Diabetic Patients ◽  
Portable Devices ◽  
Widespread Application ◽  
Wide Range

Electrochemical techniques have great promise for low-cost miniaturised easy-to-use portable devices for a wide range of applications–in particular, medical diagnosis and environmental monitoring. Different techniques can be used for biosensing, with amperometric devices taking the central role due to their widespread application in glucose monitoring. In fact, glucose biosensing takes an approximately 70% share of the biosensor market due to the need for diabetic patients to monitor their sugar levels several times a day, making it an appealing commercial market. In this review, we present the basic principles of electrochemical biosensor devices. A description of the different generations of glucose sensors is used to describe in some detail the operation of amperometric sensors and how the introduction of mediators can enhance the performance of the sensors. Electrochemical impedance spectroscopy is a technique being increasingly used in devices due to its ability to detect variations in resistance and capacitance upon binding events. Novel advances in electrochemical sensors, due to the use of nanomaterials such as carbon nanotubes and graphene, are presented as well as future directions that the field is taking.

Vegetable Extracts as Inhibitors of Carbon Steel Corrosion in Acidic Environment

2016 ◽  
Vol 1139 ◽  
pp. 46-51
Author(s):  
Lidia Benea ◽  
Eliza Dănăilă ◽  
Valentin Marian Dumitraşcu
Keyword(s):  
Carbon Steel ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Electrochemical Techniques ◽  
Steel Corrosion ◽  
Electrolytic Cell ◽  
Open Circuit ◽  
Acidic Environment ◽  
Green Inhibitor ◽  
Wide Range

Vegetable extracts have become important as an environmentally acceptable, readily available and renewable source for wide range of inhibitors. They are the rich sources of ingredients which have very high inhibition efficiency. The aim of the present work is to study the corrosion inhibition characteristics of aqueous extract of USINHIB (the abbreviation attributed to garlic extract, derived from romanian language, which was used as vegetable inhibitor), which have been studied as an eco-friendly green inhibitor for corrosion control of carbon steel in 0.5 M hydrochloric acid. The inhibitive effect of naturally available vegetable extract USINHIB toward the corrosion of carbon steel in 0.5 M HCl solution has been investigated by electrochemical techniques. Open circuit potential, potentiodynamic polarization, electrochemical impedance spectroscopy and cyclic voltammetry in presence and absence of vegetable inhibitor were used to provide detailed information about the corrosion of steel surface which occurs in acidic environment. The three electrode electrolytic cell was used. The obtained results showed the increase in the inhibition efficiency.

Wetting of glass surface using natural surfactants

2020 ◽  
Vol 12 ◽  
Author(s):  
Nihar Ranjan Biswal
Keyword(s):  
Contact Angle ◽  
Glass Surface ◽  
Pure Water ◽  
Amyl Alcohol ◽  
Synthetic Surfactant ◽  
Wide Range ◽  
Different Types ◽  
Natural Surfactants ◽  
Triton X ◽  
Solid Liquid

Background: Surfactant adsorption at the interfaces (solid–liquid, liquid–air, or liquid–liquid) is receiving considerable attention from a long time due to its wide range of practical applications. Objective: Specifically wettability of solid surface by liquids is mainly measured by contact angle and has many practical importances where solid–liquid systems are used. Adsorption of surfactants plays an important role in the wetting process. The wetting behaviours of three plant-based natural surfactants (Reetha, Shikakai, and Acacia) on the glass surface are compared with one widely used nonionic synthetic surfactant (Triton X-100) and reported in this study. Methods: The dynamic contact angle study of three different types of plant surfactants (Reetha, Shikakai and Acacia) and one synthetic surfactant (Triton X 100) on the glass surface has been carried out. The effect of two different types of alcohols such as Methanol and amyl alcohol on wettability of shikakai, as it shows little higher value of contact angle on glass surface has been measured. Results: The contact angle measurements show that there is an increase in contact angle from 47° (pure water) to 67.72°, 65.57°, 68.84°, and 68.79° for Reetha, Acacia, Shikakai, and Triton X-100 respectively with the increase in surfactant concentration and remain constant at CMC. The change in contact angle of Shikakai-Amyl alcohol mixtures are slightly different than that of methanol-Shikakai mixture, mostly there is a gradual increase in contact angle with the increasing in alcohol concentration. Conclusion: There is no linear relationship between cos θ and inverse of surface tension. There was a linear increase in surface free energy results with increase in concentration as more surfactant molecules were adsorbing at the interface enhancing an increase in contact angle.

scholarly journals Hydrophobic Modification of Graphene Oxide and Its Effect on the Corrosion Resistance of Silicone-Modified Epoxy Resin

Metals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 89
Author(s):  
Wei Yuan ◽  
Qian Hu ◽  
Jiao Zhang ◽  
Feng Huang ◽  
Jing Liu
Keyword(s):  
Contact Angle ◽  
Corrosion Resistance ◽  
Graphene Oxide ◽  
Physical Properties ◽  
Epoxy Resin ◽  
Electrochemical Impedance ◽  
Salt Spray ◽  
X Ray ◽  
Modified Graphene Oxide ◽  
Modified Epoxy

This study modified graphene oxide (GO) with hydrophilic octadecylamine (ODA) via covalent bonding to improve its dispersion in silicone-modified epoxy resin (SMER) coatings. The structural and physical properties of ODA-GO were characterized by field-emission scanning electron microscopy (FE-SEM), X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and contact angle tests. The ODA-GO composite materials were added to SMER coatings by physical mixing. FE-SEM, water absorption, and contact angle tests were used to evaluate the physical properties of the ODA-GO/SMER coatings, while salt spray, electrochemical impedance spectroscopy (EIS), and scanning Kelvin probe (SKP) methods were used to test the anticorrosive performance of ODA-GO/SMER composite coatings on Q235 steel substrates. It was found that ODA was successfully grafted onto the surfaces of GO. The resulting ODA-GO material exhibited good hydrophobicity and dispersion in SMER coatings. The anticorrosive properties of the ODA-GO/SMER coatings were significantly improved due to the increased interfacial adhesion between the nanosheets and SMER, lengthening of the corrosive solution diffusion path, and increased cathodic peeling resistance. The 1 wt.% ODA-GO/SMER coating provided the best corrosion resistance than SMER coatings with other amounts of ODA-GO (including no addition). After immersion in 3.5 wt.% NaCl solution for 28 days, the low-frequency end impedance value of the 1 wt.% ODA-GO/SMER coating remained high, at 6.2 × 108 Ω·cm2.

Performance of coatings containing treated silica fume in the corrosion protection of reinforced concrete

2018 ◽  
Vol 47 (4) ◽  
pp. 350-359 ◽  
Author(s):  
Nivin M. Ahmed ◽  
Mostafa G. Mohamed ◽  
Reham H. Tammam ◽  
Mohamed R. Mabrouk
Keyword(s):  
Reinforced Concrete ◽  
Silica Fume ◽  
Corrosion Protection ◽  
Electrochemical Impedance ◽  
Electrochemical Techniques ◽  
Dual Function ◽  
Core Shell ◽  
Protection Efficiency ◽  
Content Type ◽  
Anticorrosive Pigments

Purpose This study aims to apply novel anticorrosive pigments containing silica fume-phosphates (Si-Ph), which were prepared using core-shell technique by covering 80-90 per cent silica fume (core) with 10-20 per cent phosphates (shell) previously, to play dual functions simultaneously as anticorrosive pigments in coating formulations and as an anticorrosive admixture in concrete even if it is not present in the concrete itself. Two comparisons were held out to show the results of coatings on rebars containing core-shell pigments in concrete, and concrete admixtured with silica fume can perform a dual function as anticorrosive pigment and concrete admixture. The evaluation of corrosion protection efficiency of coatings containing core-shell pigments and those containing phosphates was performed. Design/methodology/approach Simple chemical techniques were used to prepare core-shell pigments, and their characterization was carried out in a previous work. These pigments were incorporated in solvent-based paint formulations based on epoxy resin. Different electrochemical techniques such as open-circuit potential and electrochemical impedance spectroscopy were used to evaluate the anticorrosive efficiency of the new pigments. Findings The electrochemical measurements showed that concrete containing coated rebars with core-shell pigments exhibited almost similar results to that of concrete admixtured with silica fume. Also, the anticorrosive performance of coatings containing Si-Ph pigments offered protection efficiency almost similar to that of phosphates, proving that these new pigments can perform both roles as anticorrosive pigment and concrete admixture. Originality/value Although the new Si-Ph pigments contain more than 80 per cent waste material, its performance can be compared to original phosphate pigments in the reinforced concrete.

scholarly journals Mechanochemically Synthetized PAN-Based Co-N-Doped Carbon Materials as Electrocatalyst for Oxygen Evolution Reaction

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 290
Author(s):  
Paulette Gómez-López ◽  
José Ángel Salatti-Dorado ◽  
Daily Rodríguez-Padrón ◽  
Manuel Cano ◽  
Clemente G. Alvarado-Beltrán ◽  
...  
Keyword(s):  
Oxygen Evolution ◽  
Photoelectron Spectroscopy ◽  
Carbon Nanomaterials ◽  
Carbon Materials ◽  
Catalytic Performance ◽  
X Ray Diffraction ◽  
New Class ◽  
Electrocatalytic Performance ◽  
Alkaline Environments ◽  
Metal Doped

We report a new class of polyacrylonitrile (PAN)-based Co-N-doped carbon materials that can act as suitable catalyst for oxygen evolution reactions (OER). Different Co loadings were mechanochemically added into post-consumed PAN fibers. Subsequently, the samples were treated at 300 °C under air (PAN-A) or nitrogen (PAN-N) atmosphere to promote simultaneously the Co3O4 species and PAN cyclization. The resulting electrocatalysts were fully characterized and analyzed by X-ray diffraction (XRD) and photoelectron spectroscopy (XPS), transmission (TEM) and scanning electron (SEM) microscopies, as well as nitrogen porosimetry. The catalytic performance of the Co-N-doped carbon nanomaterials were tested for OER in alkaline environments. Cobalt-doped PAN-A samples showed worse OER electrocatalytic performance than their homologous PAN-N ones. The PAN-N/3% Co catalyst exhibited the lowest OER overpotential (460 mV) among all the Co-N-doped carbon nanocomposites, reaching 10 mA/cm2. This work provides in-depth insights on the electrocatalytic performance of metal-doped carbon nanomaterials for OER.

scholarly journals Is contact angle a cause or an effect? – A cautionary tale

2020 ◽  
Vol 146 ◽  
pp. 03004
Author(s):  
Douglas Ruth
Keyword(s):  
Contact Angle ◽  
Solid Surface ◽  
Contact Angles ◽  
Two Dimensions ◽  
Experimental Results ◽  
Flow In Porous Media ◽  
Two Dimensional ◽  
Wide Range ◽  
Fluid Drop ◽  
Surrounding Fluid

The most influential parameter on the behavior of two-component flow in porous media is “wettability”. When wettability is being characterized, the most frequently used parameter is the “contact angle”. When a fluid-drop is placed on a solid surface, in the presence of a second, surrounding fluid, the fluid-fluid surface contacts the solid-surface at an angle that is typically measured through the fluid-drop. If this angle is less than 90°, the fluid in the drop is said to “wet” the surface. If this angle is greater than 90°, the surrounding fluid is said to “wet” the surface. This definition is universally accepted and appears to be scientifically justifiable, at least for a static situation where the solid surface is horizontal. Recently, this concept has been extended to characterize wettability in non-static situations using high-resolution, two-dimensional digital images of multi-component systems. Using simple thought experiments and published experimental results, many of them decades old, it will be demonstrated that contact angles are not primary parameters – their values depend on many other parameters. Using these arguments, it will be demonstrated that contact angles are not the cause of wettability behavior but the effect of wettability behavior and other parameters. The result of this is that the contact angle cannot be used as a primary indicator of wettability except in very restricted situations. Furthermore, it will be demonstrated that even for the simple case of a capillary interface in a vertical tube, attempting to use simply a two-dimensional image to determine the contact angle can result in a wide range of measured values. This observation is consistent with some published experimental results. It follows that contact angles measured in two-dimensions cannot be trusted to provide accurate values and these values should not be used to characterize the wettability of the system.

Untangling Respective Effects of Heteroatom-doped Carbon Materials in Batteries, Supercapacitors and ORR to Design High-Performance Materials

2021 ◽  
Author(s):  
Xin Feng ◽  
Ying Bai ◽  
Mingquan Liu ◽  
Ying Li ◽  
Haoyi Yang ◽  
...  
Keyword(s):  
High Performance ◽  
Carbon Materials ◽  
Wide Range

Heteroatom-doped carbon materials (HDCMs) have been widely studied as one of the most prominent material candidates for a wide range of applications, such as batteries, supercapacitors (SCs) and ORR. In...

Sign in / Sign up

Export Citation Format

Share Document