scholarly journals Long-Term Concrete Shrinkage Influence on the Performance of Reinforced Concrete Structures

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 254
Author(s):  
Alinda Dey ◽  
Akshay Vijay Vastrad ◽  
Mattia Francesco Bado ◽  
Aleksandr Sokolov ◽  
Gintaris Kaklauskas
Keyword(s):  
Reinforced Concrete ◽  
Reinforced Concrete Structures ◽  
Tension Stiffening ◽  
Model Code ◽  
Concrete Shrinkage ◽  
Time Period ◽  
Governing Factor ◽  
Model Code 2010 ◽  
Mathematical Process

The contribution of concrete to the tensile stiffness (tension stiffening) of a reinforced concrete (RC) member is a key governing factor for structural serviceability analyses. However, among the current tension stiffening models, few consider the effect brought forth by concrete shrinkage, and none studies take account of the effect for very long-term shrinkage. The present work intends to tackle this exact issue by testing multiple RC tensile elements (with different bar diameters and reinforcement ratios) after a five-year shrinking time period. The experimental deformative and tension stiffening responses were subjected to a mathematical process of shrinkage removal aimed at assessing its effect on the former. The results showed shrinkage distinctly lowered the cracking load of the RC members and caused an apparent tension stiffening reduction. Furthermore, both of these effects were exacerbated in the members with higher reinforcement ratios. The experimental and shrinkage-free behaviors of the RC elements were finally compared to the values predicted by the CEB-fib Model Code 2010 and the Euro Code 2. Interestingly, as a consequence of the long-term shrinkage, the codes expressed a smaller relative error when compared to the shrinkage-free curves versus the experimental ones.

Improvement Of Curvilinear Diagrams Of Concrete Deformation

2019 ◽  
pp. 99-104
Keyword(s):  
Reinforced Concrete ◽  
Peak Load ◽  
Experimental Studies ◽  
Concrete Structures ◽  
Deformation Model ◽  
Reinforced Concrete Structures ◽  
Significant Difference ◽  
Deformation Diagrams

Problems when calculating reinforced concrete structures based on the concrete deformation under compression diagram, which is presented both in Russian and foreign regulatory documents on the design of concrete and reinforced concrete structures are considered. The correctness of their compliance for all classes of concrete remains very approximate, especially a significant difference occurs when using Euronorm due to the different shape and sizes of the samples. At present, there are no methodical recommendations for determining the ultimate relative deformations of concrete under axial compression and the construction of curvilinear deformation diagrams, which leads to limited experimental data and, as a result, does not make it possible to enter more detailed ultimate strain values into domestic standards. The results of experimental studies to determine the ultimate relative deformations of concrete under compression for different classes of concrete, which allowed to make analytical dependences for the evaluation of the ultimate relative deformations and description of curvilinear deformation diagrams, are presented. The article discusses various options for using the deformation model to assess the stress-strain state of the structure, it is concluded that it is necessary to use not only the finite values of the ultimate deformations, but also their intermediate values. This requires reliable diagrams "s–e” for all classes of concrete. The difficulties of measuring deformations in concrete subjected to peak load, corresponding to the prismatic strength, as well as main cracks that appeared under conditions of long-term step loading are highlighted. Variants of more accurate measurements are proposed. Development and implementation of the new standard GOST "Concretes. Methods for determination of complete diagrams" on the basis of the developed method for obtaining complete diagrams of concrete deformation under compression for the evaluation of ultimate deformability of concrete under compression are necessary.

scholarly journals Punching strength of reinforced concrete flat slabs without shear reinforcement

2012 ◽  
Vol 5 (5) ◽  
pp. 659-691 ◽  
Author(s):  
P. V. P. Sacramento ◽  
M. P. Ferreira ◽  
D. R. C. Oliveira ◽  
G. S. S. A. Melo
Keyword(s):  
Reinforced Concrete ◽  
Shear Crack ◽  
Theoretical Method ◽  
Shear Reinforcement ◽  
Model Code ◽  
Flat Slabs ◽  
Codes Of Practice ◽  
Eurocode 2 ◽  
Model Code 2010 ◽  
Theoretical Results

Punching strength is a critical point in the design of flat slabs and due to the lack of a theoretical method capable of explaining this phenomenon, empirical formulations presented by codes of practice are still the most used method to check the bearing capacity of slab-column connections. This paper discusses relevant aspects of the development of flat slabs, the factors that influence the punching resistance of slabs without shear reinforcement and makes comparisons between the experimental results organized in a database with 74 slabs carefully selected with theoretical results using the recommendations of ACI 318, EUROCODE 2 and NBR 6118 and also through the Critical Shear Crack Theory, presented by Muttoni (2008) and incorporated the new fib Model Code (2010).

Automated structural assessment of existing reinforced concrete underpasses

2021 ◽  
Author(s):  
Danny Jilissen ◽  
Rob Vergoossen ◽  
Yuguang Yang ◽  
Eva Lantsoght
Keyword(s):  
Reinforced Concrete ◽  
The Netherlands ◽  
Analytical Model ◽  
Load Distribution ◽  
Traffic Load ◽  
Sensitivity Analyses ◽  
Fem Model ◽  
Structural Assessment ◽  
Model Code ◽  
Model Code 2010

<p>Due to the large number of underpasses in the Netherlands that have to be assessed, a project at the Delft University of Technology in cooperation with Royal HaskoningDHV was started. Research was conducted into the automation of the structural assessment of existing reinforced concrete underpasses in the Netherlands. The developed Automated Structural Assessment Tool (ASA Tool) consists of an analytical model and a 2.5D FEM model. The analytical model uses traffic load distribution following the Guyon-Massonnet-Bares method for bending and a method based on <i>fib </i>Model Code 2010 for shear. The script-based 2.5D FEM model uses 2D shell elements and performs a linear elastic analysis. The input and output can be linked to a database for assessment of large batches. Sensitivity analyses showed that in-plane load distribution following <i>fib </i>Model Code 2010 combined with vertical load distribution according to EN 1991-2:2003 results in underestimated shear forces.</p>

Performance of Fibre Reinforced Concrete Structures - Modelling of Damage and Reliability

2016 ◽  
Vol 711 ◽  
pp. 690-697
Author(s):  
Radomír Pukl ◽  
Tereza Sajdlová ◽  
Jan Červenka ◽  
Vladimir Červenka
Keyword(s):  
Finite Element ◽  
Reinforced Concrete ◽  
Construction Material ◽  
Experimental Investigations ◽  
Fibre Reinforced Concrete ◽  
Shear Cracks ◽  
Element Analysis ◽  
Steel Fibre Reinforced Concrete ◽  
Model Code ◽  
Model Code 2010

Steel fibre reinforced concrete (FRC) has higher ductility, it can save amount of convention reinforcement, labour and in consequence costs of the structure. However, broader use of SFRC as construction material is limited among others by lack of design codes. According to the previous study, reliability and safety of ordinary reinforced engineering can be verified using non-linear finite element analysis and several safety formats that are proposed in fib Model Code 2010. In the presented paper, safety formats are applied for fibre reinforced structures such as tunnel lining precast segment and individual approaches are compared. As tensile and shear cracks or compressive crushing can develop in the fibre reinforced concrete under severe conditions, the design combining numerical and experimental investigations together with safety formats is appropriate method how to obtain safe and reliable structure. Finite element method and advanced material models taking into account FRC properties such as shape of tensile softening branch, high toughness and ductility are described in the paper. Since the variability of FRC material properties is rather high, full probabilistic analysis seems to be the most appropriate format for evaluation of structural performance, reliability and safety.

scholarly journals Long-Term Efficiency of Two Organic Corrosion Inhibitors for Reinforced Concrete

2010 ◽  
Vol 636-637 ◽  
pp. 1059-1064 ◽  
Author(s):  
E.V. Pereira ◽  
R.B. Figueira ◽  
Manuela M. Salta ◽  
I.T.E. Fonseca
Keyword(s):  
Reinforced Concrete ◽  
Environmental Conditions ◽  
Corrosion Inhibitors ◽  
Electrochemical Techniques ◽  
Concrete Structures ◽  
Concrete Slabs ◽  
Reinforced Concrete Structures ◽  
Reinforcement Corrosion ◽  
Organic Corrosion Inhibitors

In this paper the efficiency of two organic corrosion inhibitors, a migratory and an admixture inhibitor, was evaluated by electrochemical techniques in solutions simulating the interstitial electrolyte of concrete and on concrete slabs exposed to natural environmental conditions over a five-year period. From obtained results, the usefulness of the two products is discussed aiming its application in new structures to prevent chlorides induced corrosion and as a curative method for repairing reinforced concrete structures contaminated with chlorides and affected by reinforcement corrosion.

scholarly journals Reinforced concrete structures strengthened with CFRP (ACI x FIB) - Recommendations for bending design criteria

2022 ◽  
Vol 15 (2) ◽  
Author(s):  
Igor Del Gaudio Orlando ◽  
Túlio Nogueira Bittencourt ◽  
Leila Cristina Meneghetti
Keyword(s):  
Reinforced Concrete ◽  
Limit State ◽  
Concrete Structures ◽  
Experimental Tests ◽  
Fiber Reinforced Polymers ◽  
Design Criteria ◽  
Ultimate Limit State ◽  
Reinforced Concrete Structures ◽  
Carbon Fiber Reinforced Polymers ◽  
Model Code

abstract: This work deals with the evaluation of the design criteria and security check (Ultimate Limit State - ULS) of the American (ACI-440.2R, 2017) and European (FIB Model Code, 2010) standards of reinforced concrete structures strengthened with Carbon Fiber Reinforced Polymers (CFRP), by the technique of Externally Bonded Reinforcement (EBR). It is intended to evaluate if, for a given database of 64 experimental tests of beams and slabs, the obtained results respect the safety conditions according to the mentioned standards, to increase the efficiency of this reinforcement technique and to lead to the establishment of regulatory design criteria in Brazil. Results show a conservative match among experimental and theoretical values calculated according to the two guidelines and it is concluded that a future regulation in Brazil on this subject should be based on the FIB Model Code.

Sign in / Sign up

Export Citation Format

Share Document