scholarly journals Encased Gold Nanoparticle Synthesis as a Probe for Oleuropein Self-Assembled Structure Formation

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 50
Author(s):  
Aila Jimenez-Ruiz ◽  
Rafael Prado-Gotor ◽  
José G. Fernández-Bolaños ◽  
Alejandro González-Benjumea ◽  
José María Carnerero
Keyword(s):  
Marked Decrease ◽  
Aqueous Media ◽  
Nanoparticle Synthesis ◽  
Reaction Medium ◽  
Concentrated Solutions ◽  
Protection Mechanisms ◽  
Self Assembled ◽  
Concentration Threshold ◽  
Gold Nanoparticle Synthesis ◽  
First Time

Stable oleuropein-coated gold nanoparticles in aqueous media were synthesized for the first time. Oleuropein (OLE) concentration in the reaction medium was found to greatly influence the outcome and stability of the resulting nanocolloid, with a marked decrease in particle size being found for the more concentrated oleuropein solutions. The protection mechanisms involved in the stabilized nanosystems were analyzed. Oleuropein self-assembled structures were found to be formed at a concentration threshold of [OLE] > 5 × 10−5 M, and observed through the use of CryoSEM imaging. Those structures were responsible for both the increased stability and the decrease in size observed at the more concentrated solutions.

scholarly journals Self-assembled PEG–carboxymethylcellulose nanoparticles/α-cyclodextrin hydrogels for injectable and thermosensitive drug delivery

RSC Advances ◽  
2017 ◽  
Vol 7 (5) ◽  
pp. 2905-2912 ◽  
Author(s):  
Lin Dai ◽  
Rui Liu ◽  
Li-Qiu Hu ◽  
Jun-Hui Wang ◽  
Chuan-Ling Si
Keyword(s):  
Drug Delivery ◽  
Inclusion Complex ◽  
Betulinic Acid ◽  
Aqueous Media ◽  
Self Assembled ◽  
First Time

Novel cellulose hydrogels based on the inclusion complex between α-cyclodextrin and binary-drug loaded nanoparticles (carboxymethylcellulose–betulinic acid/hydroxycamptothecine nanoparticles) were prepared in aqueous media for the first time.

Professional pathology in the production of aluminum in the Kola Arctic

2020 ◽  
pp. 767-767
Author(s):  
S. A. Syurin ◽  
S. A. Gorbanev
Keyword(s):  
Working Conditions ◽  
Occupational Diseases ◽  
Scientific Explanation ◽  
Marked Decrease ◽  
The Arctic ◽  
Aluminium Production ◽  
First Time

In 2007-2017, 22 occupational diseases were diagnosed for the first time in 18 workers engaged in aluminium production in the Arctic. A marked decrease in occupational morbidity in 2010-2017 was found, which was not associated with changes in working conditions and therefore requires an appropriate scientific explanation.

An Expeditious One-Pot Three-Component Synthesis of 4-Aryl-3,4-dihydrobenzo[g] quinoline-2,5,10(1H)-triones under Green Conditions

2020 ◽  
Vol 23 (23) ◽  
pp. 2626-2634
Author(s):  
Saiedeh Kamalifar ◽  
Hamzeh Kiyani
Keyword(s):  
Reaction Medium ◽  
Meldrum's Acid ◽  
Meldrum’S Acid ◽  
One Pot ◽  
One Pot Synthesis ◽  
Substituted Benzaldehydes ◽  
High Yields ◽  
First Time ◽  
Green Conditions

: An efficient and facial one-pot synthesis of 4-aryl-3,4-dihydrobenzo[g]quinoline- 2,5,10(1H)-triones was developed for the first time. The process proceeded via the three-component cyclocondensation of 2-amino-1,4-naphthoquinone with Meldrum’s acid and substituted benzaldehydes under green conditions. The fused 3,4-dihydropyridin-2(1H)- one-ring naphthoquinones have been synthesized with good to high yields in refluxing ethanol as a green reaction medium. This protocol is simple and effective as well as does not involve the assistance of the catalyst, additive, or hazardous solvents.

Green Synthesis and Spectroscopic Studies of Ag-rGO Nanocomposites for Highly Selective Mercury (II) Sensing

2018 ◽  
Vol 9 (1) ◽  
pp. 101-108 ◽  
Author(s):  
Shubhangi J. Mane-Gavade ◽  
Sandip R. Sabale ◽  
Xiao-Ying Yu ◽  
Gurunath H. Nikam ◽  
Bhaskar V. Tamhankar
Keyword(s):  
Green Synthesis ◽  
Color Change ◽  
Limit Of Detection ◽  
Aqueous Media ◽  
Suitable Condition ◽  
Cost Effective ◽  
Spectroscopic Studies ◽  
Calibration Plot ◽  
First Time

Introduction: Herein we report the green synthesis and characterization of silverreduced graphene oxide nanocomposites (Ag-rGO) using Acacia nilotica gum for the first time. Experimental: We demonstrate the Hg2+ ions sensing ability of the Ag-rGO nanocomposites form aqueous medium. The developed colorimetric sensor method is simple, fast and selective for the detection of Hg2+ ions in aqueous media in presence of other associated ions. A significant color change was noticed with naked eye upon Hg2+ addition. The color change was not observed for cations including Sr2+, Ni2+, Cd2+, Pb2+, Mg2+, Ca2+, Fe2+, Ba2+ and Mn2+indicating that only Hg2+ shows a strong interaction with Ag-rGO nanocomposites. Under the most suitable condition, the calibration plot (A0-A) against concentration of Hg2+ was linear in the range of 0.1-1.0 ppm with a correlation coefficient (R2) value 0.9998. Results & Conclusion The concentration of Hg2+ was quantitatively determined with the Limit of Detection (LOD) of 0.85 ppm. Also, this method shows excellent selectivity towards Hg2+ over nine other cations tested. Moreover, the method offers a new cost effective, rapid and simple approach for the detection of Hg2+ in water samples.

scholarly journals Synthesis of novel adsorbent based on tetrasulfide-functionalized fibrous silica KCC-1 for removal of Hg(II) cations

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Azam Marjani ◽  
Reza Khan Mohammadi
Keyword(s):  
Effective Interaction ◽  
Sol Gel ◽  
Aqueous Media ◽  
Synthesis Method ◽  
Mercury Ions ◽  
Toxic Heavy Metals ◽  
Uptake Capacity ◽  
Hydrothermal Preparation ◽  
Ultrasonic Assisted ◽  
First Time

AbstractHg(II) has been identified to be one of the extremely toxic heavy metals because of its hazardous effects and this fact that it is even more hazardous to animals than other pollutants such as Ag, Au, Cd, Ni, Pb, Co, Cu, and Zn. Accordingly, for the first time, tetrasulfide-functionalized fibrous silica KCC-1 (TS-KCC-1) spheres were synthesized by a facile, conventional ultrasonic-assisted, sol–gel-hydrothermal preparation approach to adsorb Hg(II) from aqueous solution. Tetrasulfide groups (–S–S–S–S–) were chosen as binding sites due to the strong and effective interaction of mercury ions (Hg(II)) with sulfur atoms. Hg(II) uptake onto TS-KCC-1 in a batch system has been carried out. Isotherm and kinetic results showed a very agreed agreement with Langmuir and pseudo-first-order models, respectively, with a Langmuir maximum uptake capacity of 132.55 mg g–1 (volume of the solution = 20.0 mL; adsorbent dose = 5.0 mg; pH = 5.0; temperature: 198 K; contact time = 40 min; shaking speed = 180 rpm). TS-KCC-1was shown to be a promising functional nanoporous material for the uptake of Hg(II) cations from aqueous media. To the best of our knowledge, there has been no report on the uptake of toxic Hg(II) cations by tetrasulfide-functionalized KCC-1 prepared by a conventional ultrasonic-assisted sol–gel-hydrothermal synthesis method.

scholarly journals Continuous synthesis of gold nanoparticles in micro- and millifluidic systems

2018 ◽  
Vol 6 (3) ◽  
Author(s):  
He Huang ◽  
Hendrik du Toit ◽  
Luca Panariello ◽  
Luca Mazzei ◽  
Asterios Gavriilidis
Keyword(s):  
Gold Nanoparticles ◽  
Nanoparticle Synthesis ◽  
Reactor Operation ◽  
Design Procedures ◽  
Time Control ◽  
Starting Point ◽  
Quantitative Understanding ◽  
Gold Nanomaterials ◽  
Gold Nanoparticle Synthesis ◽  
Flow Devices

Abstract Gold nanomaterials have diverse applications ranging from healthcare and nanomedicine to analytical sciences and catalysis. Microfluidic and millifluidic reactors offer multiple advantages for their synthesis and manufacturing, including controlled or fast mixing, accurate reaction time control and excellent heat transfer. These advantages are demonstrated by reviewing gold nanoparticle synthesis strategies in flow devices. However, there are still challenges to be resolved, such as reactor fouling, particularly if robust manufacturing processes are to be developed to achieve the desired targets in terms of nanoparticle size, size distribution, surface properties, process throughput and robustness. Solutions to these challenges are more effective through a coordinated approach from chemists, engineers and physicists, which has at its core a qualitative and quantitative understanding of the synthesis processes and reactor operation. This is important as nanoparticle synthesis is complex, encompassing multiple phenomena interacting with each other, often taking place at short timescales. The proposed methodology for the development of reactors and processes is generic and contains various interconnected considerations. It aims to be a starting point towards rigorous design procedures for the robust and reproducible continuous flow synthesis of gold nanoparticles. Graphical Abstract:

Sign in / Sign up

Export Citation Format

Share Document