scholarly journals Antioxidants and Collagen-Crosslinking: Benefit on Bond Strength and Clinical Applicability

Materials ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 5483
Author(s):  
Franziska Beck ◽  
Nicoleta Ilie
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Adhesive Bonding ◽  
Resin Composite ◽  
Bonding Process ◽  
Collagen Network ◽  
Control Groups ◽  
Collagen Crosslinking ◽  
One Year ◽  
Self Etch

Antioxidants are known for their potential of strengthening the collagen network when applied to dentin. They establish new intra-/intermolecular bonds in the collagen, rendering it less perceptive to enzymatic hydrolysis. The study evaluated the benefit on shear bond strength (SBS) of a resin–composite to dentin when antioxidants with different biomolecular mechanisms or a known inhibitor of enzymatic activity are introduced to the bonding process in a clinically inspired protocol. Specimens (900) were prepared consistent with the requirements for a macro SBS-test. Four agents (Epigallocatechingallate (EGCG), Chlorhexidindigluconate (CHX), Proanthocyanidin (PA), and Hesperidin (HPN)) were applied on dentin, either incorporated in the primer of a two-step self-etch adhesive or as an aqueous solution before applying the adhesive. Bonding protocol executed according to the manufacturer’s information served as control. Groups (n = 20) were tested after one week, one month, three months, six months, or one year immersion times (37 °C, distilled water). After six-month immersion, superior SBS were identified in PA compared to all other agents (p < 0.01) and a higher reliability in both primer and solution application when compared to control. After one year, both PA incorporated test groups demonstrated the most reliable outcome. SBS can benefit from the application of antioxidants. The use of PA in clinics might help extending the lifespan of resin-based restorations.

scholarly journals COMPARATIVE EVALUATION OF THE SHEAR BOND STRENGTH OF THREE SELF-ETCH DENTIN BONDING AGENTS TO DENTIN: AN IN-VITRO STUDY

2020 ◽  
Vol 8 (10) ◽  
pp. 454-459
Author(s):  
Bhalla V. ◽  
◽  
K. Goud M. ◽  
Chockattu S. ◽  
Khera A ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Testing Machine ◽  
Group Analysis ◽  
In Vitro Study ◽  
Bonding Agents ◽  
Mandibular Molar ◽  
Self Etch

Background:Dentin bonding is an ever-evolving field in adhesive dentistry. With the introduction of newer systems into the market, there is a crucial need to test their efficiency in terms of bond strength. Dual-cured adhesives in theory may provide for a better degree of conversion as compared to conventional light-cured adhesives .Thus, the aim of this study was to compare the shear bond strength of three different self-etch adhesives namely ClearfilSE bond (Kuraray), Tetric N Bond Universal (IvoclarVivadent) and Futura Bond DC (Voco) to dentin. Materials & Methods: Ninety extracted non-carious, intact human mandibular molar teeth were selected for this study. Each tooth was decoronated using a double-sided diamond disc with water coolant to a depth of 2mm from the cusp tip .The cut dentin surface was then abraded against 600-grit wet silicon carbide papers for 60 seconds to produce a uniform smear layer. The root portion of each tooth was mounted on a plastic ring using cold cure acrylic resin. Specimens were then divided into three adhesive groups of 30 teeth each, Group A: ClearfilSE Bond (Kuraray), Group B: Tetric N Bond Universal (IvoclarVivadent), Group C :Futura Bond DC (Voco). All bonding agents were used according to the manufacturers’ instructions, in combination with the resin composite Tetric N Ceram (IvoclarVivadent). The samples were thermocycled, followed by shear bond strength testing using a Universal testing machine (Hounsfield). Data were subjected to statistical analysis using one-way analysis of variance (ANOVA) (P<0.05) and Post hoc Tukey’s test for inter- and intra- group analysis respectively. Results: Clearfil SE Bond yielded the highest shear bond strength values (30.9 ±4.66 MPa) which were statistically significant, followed byTetric N Bond Universal group (29.8 ±4.34) and the lowest shear bond strength values were recorded for Futura Bond DC (18.2 ±3.13). Conclusion: Clearfil SE bond and Tetric N bond Universal can be considered as better options than Futura Bond DC.

scholarly journals The Effect of SnCl2/AmF Pretreatment on Short- and Long-Term Bond Strength to Eroded Dentin

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Katrin Zumstein ◽  
Anne Peutzfeldt ◽  
Adrian Lussi ◽  
Simon Flury
Keyword(s):  
Bond Strength ◽  
Failure Mode ◽  
Resin Composite ◽  
Adhesive System ◽  
Adhesive Systems ◽  
Short And Long Term ◽  
One Year ◽  
And Storage ◽  
Self Etch

This study investigated the effect of SnCl2/AmF pretreatment on short- and long-term bond strength of resin composite to eroded dentin mediated by two self-etch, MDP-containing adhesive systems. 184 dentin specimens were produced from extracted human molars. Half the specimens (n=92) were artificially eroded, and half were left untreated. For both substrates, half the specimens were pretreated with SnCl2/AmF, and half were left untreated. The specimens were treated with Clearfil SE Bond or Scotchbond Universal prior to application of resin composite. Microtensile bond strength (μTBS) was measured after 24 h or 1 year. Failure mode was detected and EDX was performed. μTBS results were statistically analyzed (α=0.05). μTBS was significantly influenced by the dentin substrate (eroded < noneroded dentin) and storage time (24 h > 1 year; p<0.0001) but not by pretreatment with SnCl2/AmF or adhesive system. The predominant failure mode was adhesive failure at the dentin-adhesive interface. The content of Sn was generally below detection limit. Pretreatment with SnCl2/AmF did not influence short- and long-term bond strength to eroded dentin. Bond strength was reduced after storage for one year, was lower to eroded dentin than to noneroded dentin, and was similar for the two adhesive systems.

scholarly journals Aplikasi klorheksidin glukonat 2%pada dentin tidak mempengaruhi kuat rekat geserkomposit resinyangmenggunakansistem adesif self etch (2% Chlorhexidine gluconate application on dentine does not affect bond strength of resin composite using self etch adhesive system)

2014 ◽  
Vol 13 (1) ◽  
pp. 7
Author(s):  
Dewi Puspitasari ◽  
Andi Soufyan ◽  
Ellyza Herda
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Composite Resin ◽  
Resin Composite ◽  
Testing Machine ◽  
Adhesive System ◽  
Chlorhexidine Gluconate ◽  
Adhesive Systems ◽  
Group I ◽  
Self Etch

Composite resin is a widely used aesthetic restoration. The restoration can fail due to secondary caries. Chlorhexidinegluconate 2% is used as a cavity disinfectant to eliminate microorganisms on the prepared cavity and to prevent thesecondary caries. The purpose of this study was to analyze the effect of chlorhexidine gluconate 2% to the bondstrength of composite resin with self etch system adhesive on dentine. Sixteen specimens of buccal dentine of premolarscrown are divided into 2 different groups. Group I: Clearfil SE Bond self-etch primer was applied for 20 seconds,Clearfil SE Bond bonding was applied for 5 seconds and polymerized for 10 seconds. Composite resin was constructedincrementally and polymerized for 20 seconds. Group II: prior to self etch primer application as in group I,chlorhexidine gluconate 2% was applied for 15 seconds. Shear bond strength was tested using Testing machine andanalyzed with unpaired T test. The highest shear bond strength was obtained by applying chlorhexidine gluconate 2%.The study concludes that chlorhexidine gluconate 2% application to dentine did not affect significantly to the bondstrength composite resin using self etch adhesive systems.

scholarly journals Comparison of the Shear bonding Strength of ION-Z GIC to a Resin Composite Using Different Adhesive Systems: RCT Study

2020 ◽  
Author(s):  
Sana Lala ◽  
Thuraya Lazkani
Keyword(s):  
Bond Strength ◽  
Bonding Strength ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Testing Machine ◽  
Group Iii ◽  
Group I ◽  
Significant Difference ◽  
Self Etch ◽  
Shear Bonding Strength

Abstract Background:In restorative dentistry we usually use Sandwich Technique for posterior restorations where GIC is placed below and a resin composite is placed over it. The bonding strength between these two materials are low. We are looking for the best adhesive system to put it in between. We think that the self-etching bond will give the best bonding strength between them whereas total etch will give lower bonding strength than self-etching system. Methods:ION-Z GIC was bonded to resin composite by using two different bonding agents. The thirty specimens used were prepared by using acrylic blocks with holes in each hole to retain the ION-Z GIC. The specimens were randomly divided into three groups:Group I: Control group.Group II: Total-etch adhesive was applied and cured over ION-Z GIC.Group III: Self-etch adhesive was applied and cured.The composite resin placed over the ION-Z GIC and cured. The shear bond strength was measured by shearing of the bonded specimens on Universal Testing Machine (Model 114) using speed of 0.1mm / minute. The reading was tabulated and subjected to statistical analysis using ANOVA and Tukey's test.Results:The test showed statistically significant difference between Group III and Group I and between Group III and Group II. Group III had the highest shear bonding strength.Conclusion:Self-etch adhesive agent produces have better shear bond strength to ION-Z than total-etch adhesive and to the group without any bonding agent.

Effect of Argon Plasma Surface Treatment on Bond Strength of Resin Composite Repair

2019 ◽  
Vol 44 (2) ◽  
pp. E75-E82 ◽  
Author(s):  
APA Ayres ◽  
R Hirata ◽  
BM Fronza ◽  
BB Lopes ◽  
GMB Ambrosano ◽  
...  
Keyword(s):  
Bond Strength ◽  
Surface Treatment ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Argon Plasma ◽  
Composite Plates ◽  
Composite Surface ◽  
Group 4 ◽  
One Year ◽  
Aged Composite

SUMMARY Objectives: This study evaluated the effect of argon plasma treatment (PLA) and its combination with sandblasting (SAN), silanization (SIL), and hydrophobic bonding resin (HBR) application on the micro-shear bond strength of water-aged restorative resin composite to a newly placed composite, simulating restoration repair. Methods and Materials: Forty-five light-cured composite plates (20-mm long × 20-mm wide × 4-mm thick) were fabricated using a hybrid composite and stored at 37°C in distilled water for six months. The aged composite surfaces were treated according to the following experimental groups, varying both treatment and order of application: 1) SAN + SIL + HBR (control), 2) SAN + PLA for 30 seconds + SIL + HBR, 3) SAN + SIL + PLA + HBR, 4) PLA + SIL + HBR, 5) PLA + SIL, 6) PLA + HBR, 7) SIL + PLA + HBR, 8) SIL + PLA, and 9) PLA. After the surface treatments, four fresh resin composite cylinders (1.5-mm high × 1.5-mm diameter) of the same composite were built on each aged composite surface using a silicone mold. After water storage for 24 hours or one year, the specimens were submitted to shear bond strength testing. Data were statistically analyzed by two-way analysis of variance and Tukey's test (5%). Results: Groups 1, 2, and 4 presented significantly higher bond strength means at 24 hours, although group 4 did not differ from group 7. Groups 5, 8, and 9 demonstrated significantly lower means than the other groups. Even though groups 1 and 2 had a significant bond strength reduction after 1 year, they still demonstrated higher bond strength at one year of storage. Conclusions: While PLA application combined with surface treatment methods demonstrated high bond strength results, this treatment alone was not as beneficial as other methods that included SAN, SIL and HBR.

scholarly journals Comparison of the Shear bonding Strength of ION-Z GIC to a Resin Composite Using Different Adhesive Systems: RCT Study

2021 ◽  
Author(s):  
Sana Lala ◽  
Thuraya Lazkani
Keyword(s):  
Bond Strength ◽  
Bonding Strength ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Testing Machine ◽  
Group Iii ◽  
Group I ◽  
Significant Difference ◽  
Self Etch ◽  
Shear Bonding Strength

Abstract Background:In restorative dentistry we usually use Sandwich Technique for posterior restorations where GIC is placed below and a resin composite is placed over it. The bonding strength between these two materials are low. We are looking for the best adhesive system to put it in between. We think that the self-etching bond will give the best bonding strength between them whereas total etch will give lower bonding strength than self-etching system. Methods:ION-Z GIC was bonded to resin composite by using two different bonding agents. The thirty specimens used were prepared by using acrylic blocks with holes in each hole to retain the ION-Z GIC. The specimens were randomly divided into three groups:Group I: Control group.Group II: Total-etch adhesive was applied and cured over ION-Z GIC.Group III: Self-etch adhesive was applied and cured.The composite resin placed over the ION-Z GIC and cured. The shear bond strength was measured by shearing of the bonded specimens on Universal Testing Machine (Model 114) using speed of 0.1mm / minute. The reading was tabulated and subjected to statistical analysis using ANOVA and Tukey's test.Results:The test showed statistically significant difference between Group III and Group I and between Group III and Group II. Group III had the highest shear bonding strength.Conclusion:Self-etch adhesive agent produces have better shear bond strength to ION-Z than total-etch adhesive and to the group without any bonding agent.

scholarly journals Pengaruh bahan bonding self-etch terhadap kekuatan perlekatan antara pasak glass fiber dengan resin komposit

2012 ◽  
Vol 1 (1) ◽  
pp. 1
Author(s):  
Astrid Yudhit ◽  
Rusfian Dayuni Ariski S
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Testing Machine ◽  
Bonding Agent ◽  
Tensile Shear ◽  
Fiber Post ◽  
Glass Fiber Post ◽  
Self Etch

Nowadays, glass fiber post and composite resin cores have been used in endodontic treatment for esthetics achievement. The success of this treatment was affected by some factors such as bond strength between post and cores. The aim of this study is to investigate the effect of self etch bonding agent that use as adhesive materials between glass fiber post and resin composite by its bond strength. Totally twenty samples is used in this study, and divided in two groups (n=10 for each group), bonding group agents and without bonding agent group (control). The tensile-shear bond strength tested with Universal Testing Machine. Then, the bond strength values were analyzed statistically with t-test (p≤ 0,05). The result shows that bonds strength values in bonding agent groups were higher than without bonding agent groups. But, there is no significantly different between groups. In conclusion, bonding agent did not have effect on tensile-shear bond strength between glass fiber post and resin composite.

scholarly journals Self-Etch Silane Primer: Reactivity and Bonding with a Lithium Disilicate Ceramic

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 641 ◽  
Author(s):  
Maria Dimitriadi ◽  
Spiros Zinelis ◽  
Maria Zafiropoulou ◽  
Nikolaos Silikas ◽  
George Eliades
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Lithium Disilicate ◽  
Storage Conditions ◽  
31P Nmr Spectroscopy ◽  
Optical Profilometry ◽  
Ceramic Surfaces ◽  
The Stability ◽  
Self Etch

The aim of the study was to evaluate the stability, reactivity, and bond strength with a lithium disilicate ceramic of a self-etch silane primer (Monobond Etch and Prime/MEP). The stability was evaluated by 1H-,31P-NMR spectroscopy (before/after aging), and the reactivity by micro MIR-FTIR spectroscopy on Ge surfaces (0, 1, 24 h) using a prehydrolyzed silane primer (Calibra Silane Coupling Agent/CLB), as a control. The effect of MEP vs. 5% HF-etching on ceramic roughness was assessed by optical profilometry. The shear bond strength (SBS) of a resin composite bonded to polished ceramic surfaces treated with MEP, HF without silane (HF+NS), HF+CLB, and HF+MEP (n = 20) was evaluated after storage in water (A: 37 °C/1 week, B: 5000×/5–55 °C and C: 100 °C/24 h). Aging did not affect the silanol groups of MEP, but only the phosphate co-monomer. Silanols were reactive forming siloxanes, but exhibited lower consumption rate than CLB. HF-etching induced significantly higher values than MEP, in all the roughness parameters tested (Sa, Sz, Sdr, Sc, Sv), with the greatest differences found in Sdr and Sv. For SBS, MEP was inferior to all treatments/storage conditions, except of HF+NS in A, where the values were similar. However, on a HF-etched substrate, MEP provided highest strength and reliability.

scholarly journals Effect of eggshell powder application on the shear bond strength of bulk-fill resin composite to bleached enamel

2021 ◽  
Vol 45 (1) ◽  
Author(s):  
Lamiaa M. Moharam ◽  
Shahinaz N. Hassan
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Resin Composite ◽  
Control Group ◽  
Mean Values ◽  
Anterior Teeth ◽  
Mi Paste Plus ◽  
Mi Paste ◽  
Post Hoc ◽  
Self Etch

Abstract Objective To investigate experimental eggshell powder (ESP) solution application effect on shear bond strength (SBS) test timing of bulk-fill resin composite to bleached enamel. Methods Eighty bovine-extracted anterior teeth were alienated to eight groups (n = 10), representing shear bond strength test timing periods (immediate or delayed) and the remineralizing agents investigated (MI paste Plus and ESP solution). Enamel surfaces were bleached using in-office chemical bleaching agent and the two remineralizing agents were applied then self-etch adhesive and bulk-fill resin composite were performed at 24 h and 14 d before SBS test was done. One-way ANOVA followed by Tukey post hoc test was performed for statistical analysis. Results The control groups showed the highest mean values, while the bleached enamel groups recorded the least mean values. ESP bleached enamel group recorded a significantly higher mean SBS values than MI paste Plus bleached group. Delayed SBS groups showed higher mean values than immediate SBS groups except for control group. Conclusions ESP had a positive and significant effect on SBS of bulk-fill resin composite to bleached enamel surface. Delaying the bonding procedure and restoration of the bleached teeth using resin composite restorations results in a better bond durability.

scholarly journals Effect of Different Adhesion Protocols on the Shear Bond Strength of Universal Adhesive Systems to Sound and Artificial Caries-Affected Dentin

2021 ◽  
Author(s):  
Omnia M. Sami ◽  
Essam A. Naguib ◽  
Rasha H. Afifi ◽  
Shaymaa M. Nagi
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Failure Modes ◽  
Resin Composite ◽  
Single Bond ◽  
Adhesive Systems ◽  
Universal Adhesive ◽  
Etch And Rinse ◽  
Significant Difference ◽  
Self Etch

Abstract Objective Bonding to different dentin substrates influences resin composite restoration outcomes. This study investigated the influence of different adhesion protocols on the shear bond strength of universal adhesive systems to sound and artificial caries-affected dentin (CAD). Materials and Methods Occlusal enamel of 80 premolars were wet grinded to obtain flat midcoronal dentin. Specimens were equally divided according to the substrate condition: sound and CAD by subjecting to pH-cycling for 14 days. Each dentin substrate was bonded with the adhesive systems used in this study: Single Bond universal adhesive or Prime&Bond universal (applied either in etch-and-rinse or self-etch adhesion protocol). Adhesive systems were utilized according to manufacturers’ instructions, then resin composite was built up. Specimens were tested for shear bond strength. The data were analyzed by three-way analysis of variance, and failure modes were determined using stereomicroscope. Results There was no statistically significant difference between the two tested adhesive systems on artificially created CAD with different adhesion protocols. On sound dentin, Single Bond universal, either in the etch-and-rinse or self-etch adhesion protocols, revealed higher statistically significant shear bond strength mean values compared with CAD. Conclusion Single Bond universal adhesive in an etch-and-rinse adhesion protocol improved only bonding to sound dentin, while no added positive effect for the etching step with Prime&Bond universal adhesive was found when bonded to both sound and CAD substrates. The influence of CAD on the performance of the universal adhesives was material-dependent.

Sign in / Sign up

Export Citation Format

Share Document