scholarly journals Mechanical Properties of Corner Joints Made of Honeycomb Panels with Double Arrow-Shaped Auxetic Cores

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4212
Author(s):  
Adam Majewski ◽  
Tomasz Krystofiak ◽  
Jerzy Smardzewski
Keyword(s):  
Mechanical Properties ◽  
Joint Stiffness ◽  
Research Area ◽  
Adhesive Joints ◽  
Tension Test ◽  
The Core ◽  
Industry Standard ◽  
3D Printed ◽  
Bending Behavior ◽  
Double Arrow

The development of both light and strong wood-derived materials is an interesting research area, particularly in terms of usability in, e.g., furniture constructions. Honeycomb panels being current industry standard are relatively thick (32 mm and 40 mm), thus their attractiveness in designing furniture is limited. In a few studies, it has been shown that honeycomb panels with paper cores are characterized by unsatisfactory mechanical properties, especially when the composite thickness is less than 20 mm. From the literature, it is also evident that mechanical properties might be improved by introducing auxetic features into the core structure. Even though it is a concept with great potential, there are a few studies dealing with honeycomb panels with auxetic cores made of paper. Furthermore, there is no research on the corner joints made from such material. For this reason, the aim of the study was to test the bending behavior of the corner adhesive joints made of honeycomb panels with double arrow-shaped auxetic cores. Within the research, the core cell was adopted based on literature and preliminary studies, paper auxetic cores were produced by the use of the designed and 3d printed device, and joints stiffness and strength were calculated analytically based on the experiment results. Evaluated corner joints stiffness, both in compression and tension test, is greater for samples made of panels with designed auxetic cores. Surprisingly, in the analyzed range of elasticity, it was statistically proved that the values of joint stiffness coefficient K did not vary significantly between compared joints pairs.

scholarly journals The Mechanical Performance of Re-Bonded and Healed Adhesive Joints Activable through Induction Heating Systems

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6351
Author(s):  
Raffaele Ciardiello
Keyword(s):  
Mechanical Properties ◽  
Electromagnetic Field ◽  
Induction Heating ◽  
Mechanical Performance ◽  
Joint Stiffness ◽  
Fatigue Tests ◽  
Adhesive Joints ◽  
Lap Joint ◽  
Heating Systems ◽  
Maximum Shear Strength

This work aims to study the healing potential properties of a reversible thermoplastic adhesive. The adhesive is activable by using induction heating systems that can induce thermal heat in the particles throughout the electromagnetic field so they can melt the adhesive for bonding or separation procedures. The healing procedure consists of damaging single lap joint (SLJ) specimens with quasi-static and fatigue tests and then using an inductor to generate an electromagnetic field able to heat the adhesive to its melting point in order to heal the damaged SLJ specimens. SLJ tests were performed on damaged and healed specimens to assess, respectively, the residual mechanical properties of the damaged specimens and the mechanical properties after healing. SLJ tests showed that the healing procedure can completely recover the joint stiffness of the damaged adhesive joints, a huge part of the maximum shear strength and the SLJ absorbed energy. This work shows also the possibility of re-bonding completely failed or separated SLJs by using the same procedure. The mechanical properties of SLJs after healing and re-bonding are compared to the SLJ compared on virgin specimens to assess the recovered mechanical properties.

Influence of slicing parameters on surface quality and mechanical properties of 3D-printed CF/PLA composites fabricated by FDM technique

2021 ◽  
pp. 1-18
Author(s):  
N. Vinoth Babu ◽  
N. Venkateshwaran ◽  
N. Rajini ◽  
Sikiru Oluwarotimi Ismail ◽  
Faruq Mohammad ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Surface Quality ◽  
3D Printed

scholarly journals An Overview on the Rheology, Mechanical Properties, Durability, 3D Printing, and Microstructural Performance of Nanomaterials in Cementitious Composites

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2950
Author(s):  
Hongwei Song ◽  
Xinle Li
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Three Dimensional ◽  
Cementitious Materials ◽  
Research Area ◽  
Cementitious Composites ◽  
Split Tensile Strength ◽  
Contour Crafting ◽  
Wide Range ◽  
Active Research

The most active research area is nanotechnology in cementitious composites, which has a wide range of applications and has achieved popularity over the last three decades. Nanoparticles (NPs) have emerged as possible materials to be used in the field of civil engineering. Previous research has concentrated on evaluating the effect of different NPs in cementitious materials to alter material characteristics. In order to provide a broad understanding of how nanomaterials (NMs) can be used, this paper critically evaluates previous research on the influence of rheology, mechanical properties, durability, 3D printing, and microstructural performance on cementitious materials. The flow properties of fresh cementitious composites can be measured using rheology and slump. Mechanical properties such as compressive, flexural, and split tensile strength reveal hardened properties. The necessary tests for determining a NM’s durability in concrete are shrinkage, pore structure and porosity, and permeability. The advent of modern 3D printing technologies is suitable for structural printing, such as contour crafting and binder jetting. Three-dimensional (3D) printing has opened up new avenues for the building and construction industry to become more digital. Regardless of the material science, a range of problems must be tackled, including developing smart cementitious composites suitable for 3D structural printing. According to the scanning electron microscopy results, the addition of NMs to cementitious materials results in a denser and improved microstructure with more hydration products. This paper provides valuable information and details about the rheology, mechanical properties, durability, 3D printing, and microstructural performance of cementitious materials with NMs and encourages further research.

scholarly journals 3D-Printed Nanocellulose-Based Cushioning–Antibacterial Dual-Function Food Packaging Aerogel

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3543
Author(s):  
Wei Zhou ◽  
Jiawei Fang ◽  
Shuwei Tang ◽  
Zhengguo Wu ◽  
Xiaoying Wang
Keyword(s):  
3D Printing ◽  
Food Packaging ◽  
Fruits And Vegetables ◽  
Antibacterial Effect ◽  
Dual Function ◽  
Printing Technology ◽  
E Coli ◽  
3D Printing Technology ◽  
The Core ◽  
3D Printed

Cushioning and antibacterial packaging are the requirements of the storage and transportation of fruits and vegetables, which are essential for reducing the irreversible quality loss during the process. Herein, the composite of carboxymethyl nanocellulose, glycerin, and acrylamide derivatives acted as the shell and chitosan/AgNPs were immobilized in the core by using coaxial 3D-printing technology. Thus, the 3D-printed cushioning–antibacterial dual-function packaging aerogel with a shell–core structure (CNGA/C–AgNPs) was obtained. The CNGA/C–AgNPs packaging aerogel had good cushioning and resilience performance, and the average compression resilience rate was more than 90%. Although AgNPs was slowly released, CNGA/C–AgNPs packaging aerogel had an obvious antibacterial effect on E. coli and S. aureus. Moreover, the CNGA/C–AgNPs packaging aerogel was biodegradable. Due to the customization capabilities of 3D-printing technology, the prepared packaging aerogel can be adapted to more application scenarios by accurately designing and regulating the microstructure of aerogels, which provides a new idea for the development of food intelligent packaging.

scholarly journals Fabrication of Polycaprolactone/Nano Hydroxyapatite (PCL/nHA) 3D Scaffold with Enhanced In Vitro Cell Response via Design for Additive Manufacturing (DfAM)

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1394
Author(s):  
Yong Sang Cho ◽  
So-Jung Gwak ◽  
Young-Sam Cho
Keyword(s):  
Mechanical Properties ◽  
Cell Response ◽  
Structural Characteristics ◽  
Structure Design ◽  
Compressive Modulus ◽  
Control Group ◽  
Design For Additive Manufacturing ◽  
3D Scaffold ◽  
3D Printed

In this study, we investigated the dual-pore kagome-structure design of a 3D-printed scaffold with enhanced in vitro cell response and compared the mechanical properties with 3D-printed scaffolds with conventional or offset patterns. The compressive modulus of the 3D-printed scaffold with the proposed design was found to resemble that of the 3D-printed scaffold with a conventional pattern at similar pore sizes despite higher porosity. Furthermore, the compressive modulus of the proposed scaffold surpassed that of the 3D-printed scaffold with conventional and offset patterns at similar porosities owing to the structural characteristics of the kagome structure. Regarding the in vitro cell response, cell adhesion, cell growth, and ALP concentration of the proposed scaffold for 14 days was superior to those of the control group scaffolds. Consequently, we found that the mechanical properties and in vitro cell response of the 3D-printed scaffold could be improved by kagome and dual-pore structures through DfAM. Moreover, we revealed that the dual-pore structure is effective for the in vitro cell response compared to the structures possessing conventional and offset patterns.

Physical property of 3D-printed sinusoidal pattern using shape memory TPU filament

2020 ◽  
Vol 90 (21-22) ◽  
pp. 2399-2410 ◽  
Author(s):  
Shahbaj Kabir ◽  
Hyelim Kim ◽  
Sunhee Lee
Keyword(s):  
Mechanical Properties ◽  
Tensile Test ◽  
Shape Memory ◽  
Fused Deposition Modeling ◽  
Loss Modulus ◽  
Thermoplastic Polyurethane ◽  
Heating Process ◽  
Fused Deposition ◽  
3D Printed ◽  
Sinusoidal Pattern

This study has investigated the physical properties of 3D-printable shape memory thermoplastic polyurethane (SMTPU) filament and its 3D-printed sinusoidal pattern obtained by fused deposition modeling (FDM) technology. To investigate 3D filaments, thermoplastic polyurethane (TPU) and SMTPU filament were examined by conducting infrared spectroscopy, x-ray diffraction (XRD), dynamic mechanical thermal analysis (DMTA), differential scanning calorimetry (DSC) and a tensile test. Then, to examine the 3D-printed sinusoidal samples, a sinusoidal pattern was developed and 3D-printed. Those samples went through a three-step heating process: (a) untreated state; (b) 5 min heating at 70°C, cooling for 30 min at room temperature; and (c) a repeat of step 2. The results obtained by the three different heating processes of the 3D-printed sinusoidal samples were examined by XRD, DMTA, DSC and the tensile test to obtain the effect of heating or annealing on the structural and mechanical properties. The results show significant changes in structure, crystallinity and thermal and mechanical properties of SMTPU 3D-printed samples due to the heating steps. XRD showed the increase in crystallinity with heating. In DMTA, storage modulus, loss modulus and the tan σ peak position also changed for various heating steps. The DSC result showed that the Tg for different steps of the SMTPU 3D-printed sample remained almost the same at around 51°C. The tensile property of the TPU 3D-printed sinusoidal sample decreased in terms of both load and elongation with increased heating processes, while for the SMTPU 3D-printed sinusoidal sample, the load decreased but elongation increased about 2.5 times.

Effect of molecular weight on mechanical properties and microstructure of 3D printed PEEK

2020 ◽  
Author(s):  
Qinfei Xu ◽  
Yingshuang Shang ◽  
Zilong Jiang ◽  
Zhaoyang Wang ◽  
Chenyi Zhou ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
3D Printed
Sign in / Sign up

Export Citation Format

Share Document