scholarly journals Experimental Investigation on the Mechanical Properties and Microstructure of Basalt Fiber Reinforced Engineered Cementitious Composite

Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3796
Author(s):  
Qiang Du ◽  
Changlu Cai ◽  
Jing Lv ◽  
Jiao Wu ◽  
Ting Pan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Flexural Strength ◽  
Basalt Fiber ◽  
Sem Analysis ◽  
Splitting Tensile Strength ◽  
Cementitious Composite ◽  
Fiber Reinforced ◽  
Bond Quality ◽  
Engineered Cementitious Composite

This study investigated fundamental mechanical properties of a basalt fiber reinforced engineered cementitious composite (BF-ECC) with different volume fractions of basalt fiber (BF), water–binder ratio (W/B) and fly ash (FA) content. The compressive strength, splitting tensile strength, flexural strength and static modulus of BF-ECC were studied at 3, 28 and 56 days, respectively, to explore their development along the ages. Furthermore, the scanning electron microscopy (SEM) analysis was conducted to evaluate the microstructure of BF-ECC. Experiment results demonstrated that bond quality between the BF and the matrix is good, which leads to a significant increase in the flexural strength and splitting tensile strength. The pozzolanic effect of FA obviously improved the splitting tensile and flexural strength of BF-ECC after 56 days of curing, and the appropriate content of the FA content in the BF-ECC ranges from 50% to 60%.

scholarly journals Mechanical Properties Test and Strength Prediction on Basalt Fiber Reinforced Recycled Concrete

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Min Huang ◽  
Yuru Zhao ◽  
Haonan Wang ◽  
Shihao Lin
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Flexural Strength ◽  
Basalt Fiber ◽  
Fiber Content ◽  
Splitting Tensile Strength ◽  
Recycled Concrete ◽  
Recycled Aggregate ◽  
Fiber Reinforced ◽  
Replacement Ratio

In order to study the mechanical properties of basalt fiber reinforced recycled concrete (BFRRC), nine groups of tests are designed with three different replacement rates of recycled aggregates (40%, 70%, and 100%) and volume fraction of basalt fibers (0.1%, 0.2%, and 0.3%). Another group of tests on ordinary concrete without fiber and recycled aggregate is used as comparison. The workability, cubic compressive strength, splitting tensile strength, and flexural strength of BFRRC are tested and analyzed. The effects of fiber content and recycled aggregate replacement ratio on the mechanical properties of concrete are studied. The strength development of fiber reinforced recycled concrete is predicted by using convolution neural network theory. The test results show that the fluidity of concrete mixtures decreases, while the cohesion and water retention are better than ordinary concrete with the increase of replacement ratio of recycled coarse aggregate and basalt fiber content. The compressive and flexural strength of recycled concrete first decrease and then increase slightly, while the splitting tensile strength of recycled concrete continue to decrease with the increase of replacement ratio of recycled aggregate. The flexural strength and splitting tensile strength of recycled concrete are obviously improved after adding basalt fiber, while the compressive strength increases first and then decreases with the increase of fiber content. A convolution neural network model for predicting the strength of basalt fiber reinforced recycled concrete is established. The predicted results are very close to the measured values and can be used as reference for the mix ratio of basalt fiber reinforced recycled concrete.

scholarly journals Influence of Basalt Fiber on the Physical and Mechanical Properties of Aerated Ceramsite Concrete

2020 ◽  
Vol 44 (6) ◽  
pp. 427-432
Author(s):  
Yonghe Yao ◽  
Yanhong Wang ◽  
Jun Xu ◽  
Yajun Hu
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Apparent Density ◽  
Basalt Fiber ◽  
Volume Ratio ◽  
Physical And Mechanical Properties ◽  
Splitting Tensile Strength ◽  
Technical Performance

In order to improve the technical performance of Aerated Ceramsite Concrete (ACC) so that it could better meet the requirements of lightweight wallboards for prefabricated buildings, this study mixed 0%, 0.05%, 0.10%, 0.15% and 0.20% of the Basalt Fiber (BF) by volume ratio into the ACC of 100mm-thickness LC15 lightweight wallboards, and conducted experiments to test the apparent density, compressive strength, splitting tensile strength, and flexural strength on the 7d, 14d, and 28d of the experiment; then, the microstructure and failure forms of the BF-improved ACC material were observed and analyzed, and the results showed that adding BF can effectively improve the physical and mechanical properties of ACC, and the optimal BF content in the ACC of lightweight wallboards is 0.10%-0.15%.

scholarly journals Experimental Study on the Mechanical Properties of Amorphous Alloy Fiber-Reinforced Concrete

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Chaohua Jiang ◽  
Yizhi Wang ◽  
Wenwen Guo ◽  
Chen Jin ◽  
Min Wei
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Amorphous Alloy ◽  
Flexural Strength ◽  
Concrete Strength ◽  
Splitting Tensile Strength ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced

With great mechanical properties and corrosion resistance, amorphous alloy fiber (AAF) is a highly anticipated material in the fiber-reinforced concrete (FRC) field. In this study, the mechanical properties of AAFRC such as compressive strength, tensile strength, and flexural strength were examined. The comparison and analysis between AAFRC and steel fiber-reinforced concrete (SFRC) were also carried out. The results show that adding fibers significantly improves the concrete strength and toughness index. Compared with plain concrete, the compressive strength, splitting tensile strength, and flexural strength of AAFRC increase by 8.21–16.72%, 10.4–32.8%, and 18.12–45.21%, respectively. Meanwhile, the addition of AAF with a greater tensile strength and larger unit volume quantity improves the splitting tensile strength and flexural strength of concrete more noticeably than that of SF. Adding AAF improves the ductility of concrete more significantly in comparison to the SF. AAFRC shows great interfacial bonding performance as well. A prediction equation for the strength of AAFRC was proposed, which verified good accuracy calibrated based on the test results.

scholarly journals Mechanical and Dynamic Properties of Hybrid Fiber Reinforced Fly-Ash Concrete

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Dan-Yang Su ◽  
Jian-Yong Pang ◽  
Xiao-Wen Huang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Fly Ash ◽  
Dynamic Compression ◽  
Basalt Fiber ◽  
Splitting Tensile Strength ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Fly Ash Concrete

In order to explore the influence of basalt-polypropylene hybrid fiber on the static mechanical properties and dynamic compression properties of fly-ash concrete, 16 groups of basalt-polypropylene hybrid fiber fly-ash concrete (HBPC) and 1 group of benchmark concrete were designed and prepared. The slump, static compressive strength, static splitting tensile strength, and dynamic compressive performance tests were tested. At the same time, the mechanism of the mechanical properties of hybrid fiber reinforced fly-ash concrete was analyzed by means of scanning electron microscopy (SEM). The results show that the failure of the benchmark concrete is mainly brittle failure. Compared with the benchmark concrete, the static compressive strength and splitting tensile strength of HBPC are significantly enhanced. Basalt-polypropylene hybrid fiber, polypropylene fiber, and basalt fiber, are extremely significant factors affecting the slump, static compressive strength, and static splitting tensile strength of HBPC, respectively. The peak stress of the benchmark concrete and HBPC increases with the increase of the loading air pressure, showing a certain strain rate effect. SEM shows that the fibers have good dispersibility in the concrete and good adhesion with the concrete matrix interface, but excessive fibers will cause fiber agglomeration, which increases the internal defects of HBPC.

Effect of using magnetic water on the mechanical properties of concrete exposed to elevated temperature

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Wasim Barham ◽  
Ammar AL-Maabreh ◽  
Omar Latayfeh
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Elevated Temperature ◽  
Flexural Strength ◽  
Tap Water ◽  
Splitting Tensile Strength ◽  
Content Type ◽  
Normal Water ◽  
Magnetic Water

PurposeThe influence of using magnetic water instead of tap water in the mechanical properties of the concrete exposed to elevated temperatures was investigated. Two concrete mixes were used and cast with the same ingredients. Tap water was used in the first mix and magnetic water was used in the second mix. A total of 48 specimens were cast and divided as follows: 16 cylinders for the concrete compressive strength test (8 samples for each mix), 16 cylinders for the splitting tensile strength (8 specimens for each mix) and 16 beams to test the influences of magnetized water on the flexural strength of concrete (8 specimens for each mixture). Specimens were exposed to temperatures of (25 °C, 200 °C, 400 °C and 600 °C). The experimental results showed that magnetic water highly affected the mechanical properties of concrete. Specimens cast and curried out with magnetic water show higher compressive strength, splitting tensile strength and flexural strength compared to normal water specimens at all temperatures. The relative strength range between the two types of water used was 110–123% for compressive strength and 110–133% for splitting strength. For the center point loading test, the relative flexural strength range was 118–140%. The use of magnetic water in mixing concrete contribute to a more complete hydration process.Design/methodology/approachExperimental study was carried out on two concrete mixes to investigate the effect of magnetic water. Mix#1 used normal water as the mixing water, and Mix#2 used magnetic water instead of normal water. After 28 days, all the samples were taken out of the tank and left to dry for seven days, then they were divided into different groups. Each group was exposed to a different temperature where it was placed in a large oven for two hours. Three different tests were carried out on the samples, these tests were concrete compressive strength, flexural strength and splitting tensile strength.FindingsExposure of concrete to high temperatures had a significant influence on concrete mechanical properties. Specimens prepared using magnetic water showed higher compressive strength at all temperature levels. The use of magnetic water in casting and curing concrete can increase the compressive strength by 23%. Specimens prepared using magnetic water show higher splitting tensile strength at all temperatures up to 33%. The use of magnetic water in casting and curing can strengthen and increase concrete resistance to high temperatures, a significant enhancement in flexural strength at all temperatures was found with a value up to 40%.Originality/valuePrevious research proved the advantages of using magnetic water for improving the mechanical properties of concrete under normal conditions. The potential of using magnetic water in the concrete industry in the future requires conducting extensive research to study the behavior of magnetized concrete under severe conditions to which concrete structures may be subjected to. These days, there are attempts to obtain stronger concrete with high resistance to harsh environmental conditions without adding new costly ingredients to its main mixture. No research has been carried out to investigate the effect of magnetic water on the mechanical properties of concrete exposed to elevated temperature. The main objective of this study is to evaluate the effect of using magnetic water on the mechanical properties of hardened concrete subjected to elevated temperature.

Study of Concretes Reinforced by Plastic Fibers Based on Local Materials

2019 ◽  
Vol 42 ◽  
pp. 100-108 ◽  
Author(s):  
Adda Hadj Mostefa ◽  
Merdaci Slimane
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Bond Strength ◽  
Environmental Problem ◽  
Splitting Tensile Strength ◽  
Waste Plastic ◽  
Single Use ◽  
Local Materials

This work is carried out to investigate the performance of concrete reinforced with plastic fibers obtained locally (bottle waste as fiber). Bottle waste plastic was chosen because it is being thrown after single use and cause environmental problem. One way to recycle wasted bottles plastic is grinded into irregular fiber. Then, it was incorporate with the concrete and tests the performance of the concrete. The study was conducted using cylindrical and rectangular (cube) mold of concrete to investigate the performance of the concrete in term of mechanical properties. In this research, the mechanical properties that were measured are compressive strength, splitting tensile strength and flexural strength. The results revealed that the presence of plastic fiber in concrete will increase the concrete performance, as well as the concrete bond strength is improved and the cracks in the concrete decrease the use of fibers and reduce plastic waste.

Mechanical Properties and Applications of Engineered Cementitious Composites (ECC)

2013 ◽  
Vol 405-408 ◽  
pp. 2889-2892 ◽  
Author(s):  
Zhi Qin Zhao ◽  
Ren Juan Sun ◽  
Zi Qiang Feng ◽  
Shan Shan Wei ◽  
Da Wei Huang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Bending Strength ◽  
Construction Material ◽  
Shear Load ◽  
High Ductility ◽  
Cementitious Composite ◽  
Engineered Cementitious Composite ◽  
Scale Field ◽  
Reinforced Cement

Engineered Cementitious Composite (ECC) is a fiber reinforced cement based composite material, which systematically designed on the basis of micromechanics and engineered to achieve high ductility under tensile and shear load. The article introduced the development of ECC as advanced construction material, shown different mechanical properties of ECC, tensile strength, compressive strength, bending strength, shear strength. And in light of recent and future full-scale field applications of ECC were also summarized.

scholarly journals Experimental Study on Mechanical Properties of High Performance Hybrid Fiber Concrete for Shaft Lining

2021 ◽  
Vol 11 (17) ◽  
pp. 7926
Author(s):  
Qian Zhang ◽  
Wenqing Zhang ◽  
Yu Fang ◽  
Yongjie Xu ◽  
Xianwen Huang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Reinforced Concrete ◽  
Reference Group ◽  
Splitting Tensile Strength ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Fiber Concrete ◽  
Shaft Lining

In order to solve the problem of highly brittle shaft lining under dynamic loading, a combination of hybrid fiber concrete mixed with steel and polypropylene fiber is proposed to make shaft lining. C60, the concrete commonly used in shaft lining, was selected as the reference group. The static mechanical properties, dynamic mechanical properties, and crack failure characteristics of the hybrid fiber concrete were experimentally studied. The test results showed that compared to the reference group concrete, the compressive strength of the hybrid fiber-reinforced concrete did not significantly increase, but the splitting tensile strength increased by 60.4%. The split Hopkinson compression bar results showed that the optimal group peak stress and peak strain of the hybrid fiber concrete increased by 58.2% and 79.2%, respectively, and the dynamic toughness increased by 68.1%. The strain distribution before visible cracks was analyzed by the DIC technology. The results showed that the strain dispersion phenomenon of the fiber-reinforced concrete specimen was stronger than that of the reference group concrete. By comparing the crack failure forms of the specimens, it was found that compared to the reference group concrete, the fiber-reinforced concrete specimens showed the characteristics of continuous and slow ductile failure. The above results suggest that HFRC has significantly high dynamic splitting tensile strength and compressive deformation capacity, as well as a certain anti-disturbance effect. It is an excellent construction material for deep mines under complex working conditions.

scholarly journals Use of waste paper ash or wood ash as substitution to fly ash in production of geopolymer concrete

2021 ◽  
Vol 30 (3) ◽  
pp. 464-476
Author(s):  
Haider Owaid ◽  
Haider Al-Baghdadi ◽  
Muna Al-Rubaye
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Fly Ash ◽  
Flexural Strength ◽  
Sodium Hydroxide ◽  
Wood Ash ◽  
Splitting Tensile Strength ◽  
Waste Paper ◽  
Geopolymer Concrete

Large quantities of paper and wood waste are generated every day, the disposal of these waste products is a problem because it requires huge space for their disposal. The possibility of using these wastes can mitigate the environmental problems related to them. This study presents an investigation on the feasibility of inclusion of waste paper ash (WPA) or wood ash (WA) as replacement materials for fly ash (FA) class F in preparation geopolymer concrete (GC). The developed geopolymer concretes for this study were prepared at replacement ratios of FA by WPA or WA of 25, 50, 75 and 100% in addition to a control mix containing 100% of FA. Sodium hydroxide (NaOH) solutions and sodium silicate (Na2SiO3) are used as alkaline activators with 1M and 10M of sodium hydroxide solution.The geopolymer concretes have been evaluated with respect to the workability, the compressive strength, splitting tensile strength and flexural strength. The results indicated that there were no significant differences in the workability of the control GC mix and the developed GC mixes incorporating WPA or WA. Also, the results showed that, by incorporating of 25–50% PWA or 25% WA, the mechanical properties (compressive strength, splitting tensile strength and flexural strength) of GC mixes slightly decreased. While replacement with 75–100% WPA or with 50–100% WA has reduced these mechanical properties of GC mixes. As a result, there is a feasibility of partial replacement of FA by up to 50% WPA or 25% WA in preparation of the geopolymer concrete.

Sign in / Sign up

Export Citation Format

Share Document