scholarly journals The Structural and Mechanical Properties of the UHMWPE Films Mixed with the PE-Wax

Materials ◽  
2020 ◽  
Vol 13 (15) ◽  
pp. 3422 ◽  
Author(s):  
Tarek Dayyoub ◽  
Leonid K. Olifirov ◽  
Dilyus I. Chukov ◽  
Sergey D. Kaloshkin ◽  
Evgeniy Kolesnikov ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
High Molecular Weight ◽  
Large Scale ◽  
Scanning Calorimetry ◽  
Average Value ◽  
Mechanical And Tribological Properties ◽  
Cavitation Phenomenon ◽  
The Coefficient Of Friction ◽  
Wax Content

Since obtaining a highly oriented structure based on a large-scale commercial ultra-high molecular weight polyethylene (UHMWPE) is considered very difficult due to its high molecular weight and melting index, modifying the structure of these cheap commercial UHMWPE brands into a supra-molecular structure with fiber-forming properties by adding a small amount of polyethylene wax (PE-wax) will provide the possibility to obtain highly oriented UHMWPE products with enhanced mechanical and tribological properties. In this work, highly oriented UHMWPE/PE-wax films were prepared. The PE-wax affected the UHMWPE as an intermolecular lubricant. The obtained lamellar structure of the UHMWPE/PE-wax composites had a better processability. The UHMWPE and UHMWPE/PE-wax structures for the xerogels and the films were studied by using differential scanning calorimetry and scanning electron microscopy. The PE-wax presence enhanced the mechanical properties of the UHMWPE/PE-wax films to a high degree. The highest average value of the tensile strength was 1320 MPa (an increase of 78%) obtained by adding a PE-wax content of 1.0 wt.%, and the highest average value of the Young’s modulus was 56.8 GPa (an increase of 71%) obtained by adding a PE-wax content of 2.0 wt.%. The addition of the PE-wax increased the work of fracture values of the UHMWPE/PE-wax films up to 233%. The formation of the cavities was observed in the virgin UHMWPE films more than in the UHMWPE/PE-wax films, and the whitening of the oriented films was related to the crystallization process more than to the cavitation phenomenon. The coefficient of friction of the oriented UHMWPE/PE-wax films improved by 33% in comparison with the isotropic UHMWPE, and by 7% in comparison with the oriented virgin UHMWPE films.

High Molecular Weight Polyethylene Nanospheres: Synthesis Physical and Mechanical Properties

2008 ◽  
Vol 8 (6) ◽  
pp. 3123-3135 ◽  
Author(s):  
Pradip Paik ◽  
Kamal K. Kar
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
Particle Size ◽  
Electron Microscope ◽  
Elastic Modulus ◽  
High Molecular Weight ◽  
Melting Temperature ◽  
Ion Beam ◽  
Atomic Scale ◽  
Scanning Calorimetry

The high molecular weight (MW) polyethylene (PE) particles of particle size varied from macro to micron to nanometer were synthesized by Grignard reagent. The microscopy analysis (scanning electron microscope, SEM; transmission electron microscope, TEM; and atomic force microscope, AFM) shows the spherical shape of PE particles. The effects of particle size, varies from macro to nanometer scale on crystal structure, crystallinity (χc), glass transition temperature (Tg), melting temperature (Tm), surface roughness and mechanical properties were studied. Differential scanning calorimetry (DSC) experiments show that the nanoparticles of PE are highly crystalline (χc ≈ 72%). The crystal length of PE nanoparticles is found to be approximately 14 Å. Although the Gibbs-Thomson equation is explained the depression of melting temperature (ΔTm) by 5 °C, the impervious results of Tg are still not fully understood. The low roughness value (2 Å) proves the presence of "atomic-scale-chain" folding at the surface of PE nanoparticles. A novel protocol is developed, and the elastic modulus of individual nanospherical PE particles is computed from 'force-distance' mapping curves of AFM. Hemispherical tungsten (W) tip was fabricated from focused ion beam and used as an indenter to measure the mechanical properties. It is found that the nano sized PE particles have higher elastic modulus (E = 1.2–1.4 GPa) compared to the bulk or macro sized PE (E = 0.6–0.7 GPa). The results corroborate the robustness of our experiments, since, the analogous results for macro sized particles match well with the literature.

scholarly journals Melt- vs. Non-Melt Blending of Complexly Processable Ultra-High Molecular Weight Polyethylene/Cellulose Nanofiber Bionanocomposite

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 404
Author(s):  
Nur Sharmila Sharip ◽  
Hidayah Ariffin ◽  
Tengku Arisyah Tengku Yasim-Anuar ◽  
Yoshito Andou ◽  
Yuki Shirosaki ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
Tensile Strength ◽  
Yield Strength ◽  
Young’S Modulus ◽  
High Molecular Weight ◽  
Melt Processing ◽  
Cellulose Nanofiber ◽  
Melt Blending ◽  
Ultra High Molecular Weight

The major hurdle in melt-processing of ultra-high molecular weight polyethylene (UHMWPE) nanocomposite lies on the high melt viscosity of the UHMWPE, which may contribute to poor dispersion and distribution of the nanofiller. In this study, UHMWPE/cellulose nanofiber (UHMWPE/CNF) bionanocomposites were prepared by two different blending methods: (i) melt blending at 150 °C in a triple screw kneading extruder, and (ii) non-melt blending by ethanol mixing at room temperature. Results showed that melt-processing of UHMWPE without CNF (MB-UHMWPE/0) exhibited an increment in yield strength and Young’s modulus by 15% and 25%, respectively, compared to the Neat-UHMWPE. Tensile strength was however reduced by almost half. Ethanol mixed sample without CNF (EM-UHMWPE/0) on the other hand showed slight decrement in all mechanical properties tested. At 0.5% CNF inclusion, the mechanical properties of melt-blended bionanocomposites (MB-UHMWPE/0.5) were improved as compared to Neat-UHMWPE. It was also found that the yield strength, elongation at break, Young’s modulus, toughness and crystallinity of MB-UHMWPE/0.5 were higher by 28%, 61%, 47%, 45% and 11%, respectively, as compared to the ethanol mixing sample (EM-UHMWPE/0.5). Despite the reduction in tensile strength of MB-UHMWPE/0.5, the value i.e., 28.4 ± 1.0 MPa surpassed the minimum requirement of standard specification for fabricated UHMWPE in surgical implant application. Overall, melt-blending processing is more suitable for the preparation of UHMWPE/CNF bionanocomposites as exhibited by their characteristics presented herein. A better mechanical interlocking between UHMWPE and CNF at high temperature mixing with kneading was evident through FE-SEM observation, explains the higher mechanical properties of MB-UHMWPE/0.5 as compared to EM-UHMWPE/0.5.

scholarly journals The Effect of Stereocomplex Polylactide Particles on the Stereocomplexation of High Molecular Weight Polylactide Blends

Polymers ◽  
2021 ◽  
Vol 13 (12) ◽  
pp. 2018
Author(s):  
Muhammad Samsuri ◽  
Ihsan Iswaldi ◽  
Purba Purnama
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
High Molecular Weight ◽  
Nucleating Agent ◽  
Solution Casting ◽  
Casting Method ◽  
Crystalline Fraction ◽  
Crystalline Structures ◽  
Solution Casting Method

Stereocomplexation is one of several approaches for improving polylactide (PLA) properties. The high molecular weight of poly L-lactide (PLLA) and poly D-lactide (PDLA) homopolymers are a constraint during the formation of stereocomplex PLAs (s-PLAs). The presence of s-PLA particles in PLA PLLA/PDLA blends can initiate the formation of s-PLA crystalline structures. We used the solution casting method to study the utilization of s-PLA materials from high molecular weight PLLA/PDLA blends for increasing s-PLA formation. The s-PLA particles initiated the formation of high molecular weight PLLA/PDLA blends, obtaining 49.13% s-PLA and 44.34% of the total crystalline fraction. In addition, the mechanical properties were enhanced through s-PLA crystalline formation and the increasing of total crystallinity of the PLLA/PDLA blends. The s-PLA particles supported initiation for s-PLA formation and acted as a nucleating agent for PLA homopolymers. These unique characteristics of s-PLA particles show potential to overcome the molecular weight limitation for stereocomplexation of PLLA/PDLA blends.

scholarly journals Physicochemical and Antifungal Properties of Clotrimazole in Combination with High-Molecular Weight Chitosan as a Multifunctional Excipient

Marine Drugs ◽  
2020 ◽  
Vol 18 (12) ◽  
pp. 591
Author(s):  
Bożena Grimling ◽  
Bożena Karolewicz ◽  
Urszula Nawrot ◽  
Katarzyna Włodarczyk ◽  
Agata Górniak
Keyword(s):  
Molecular Weight ◽  
High Molecular Weight ◽  
Weight Ratio ◽  
Scanning Calorimetry ◽  
Minimal Inhibitory Concentrations ◽  
Dissolution Tests ◽  
Effective Combination ◽  
The Impact ◽  
High Molecular Weight Chitosan

Chitosans represent a group of multifunctional drug excipients. Here, we aimed to estimate the impact of high-molecular weight chitosan on the physicochemical properties of clotrimazole–chitosan solid mixtures (CL–CH), prepared by grinding and kneading methods. We characterised these formulas by infrared spectroscopy, differential scanning calorimetry, and powder X-ray diffractometry, and performed in vitro clotrimazole dissolution tests. Additionally, we examined the antifungal activity of clotrimazole–chitosan mixtures against clinical Candida isolates under neutral and acid conditions. The synergistic effect of clotrimazole and chitosan S combinations was observed in tests carried out at pH 4 on Candida glabrata strains. The inhibition of C. glabrata growth reached at least 90%, regardless of the drug/excipient weight ratio, and even at half of the minimal inhibitory concentrations of clotrimazole. Our results demonstrate that clotrimazole and high-molecular weight chitosan could be an effective combination in a topical antifungal formulation, as chitosan acts synergistically with clotrimazole against non-albicans candida strains.

Effect of N2 Ion Bombardment on Optical and Mechanical Properties of Ultra-High Molecular Weight Polyethylene (UHMWPE)

2013 ◽  
Vol 341 ◽  
pp. 169-180 ◽  
Author(s):  
A.M. Abdul-Kader ◽  
Y.A. El-Gendy ◽  
Awad A. Al-Rashdi ◽  
A.M. Salem
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
High Molecular Weight ◽  
Ion Beam ◽  
Surface Hardness ◽  
Conjugation Length ◽  
High Fluences ◽  
Pristine Sample ◽  
Optical And Mechanical Properties ◽  
Ultra High Molecular Weight

The effect of ion beam bombardment on the optical and mechanical properties of ultra-high molecular weight polyethylene (UHMWPE) was investigated. UHMWPE polymer samples were bombarded with 150 keV N2ions under vacuum at room temperature to high fluences ranging from 1x1016to 2x1017ions cm-2. The untreated as well as treated samples were investigated by ultraviolet-visible (UV-Vis) spectrophotometer and Vickers micro-hardness techniques. The direct and indirect optical band gap decreased from 2.9 and 1.65 eV for pristine sample to 1.7 and 1 eV for those bombarded with N2ion beam at the highest fluence, respectively. With increasing ion fluence, an increase in the number of carbon atoms per conjugation length, N and number of carbon atoms per cluster, M in a formed cluster were observed. A significant improvement in surface hardness was obtained by increasing the ion fluence.

Semi-bio-based aromatic polyamides from 2,5-furandicarboxylic acid: toward high-performance polymers from renewable resources

RSC Advances ◽  
2016 ◽  
Vol 6 (90) ◽  
pp. 87013-87020 ◽  
Author(s):  
Kaiju Luo ◽  
Yan Wang ◽  
Junrong Yu ◽  
Jing Zhu ◽  
Zuming Hu
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Molecular Weight ◽  
High Molecular Weight ◽  
Renewable Resources ◽  
High Performance ◽  
Good Thermal Stability ◽  
Aromatic Polyamides ◽  
High Performance Polymers ◽  
Furandicarboxylic Acid

Aromatic furanic polyamides with relatively high molecular weight were synthesized, and good thermal stability and mechanical properties were demonstrated.

Sign in / Sign up

Export Citation Format

Share Document