scholarly journals The Effect of ZnO on the Failure of PET by Environmental Stress Cracking

Materials ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 2844
Author(s):  
Ana Beatriz de Sousa Barros ◽  
Rômulo de Freitas Farias ◽  
Danilo Diniz Siqueira ◽  
Carlos Bruno Barreto Luna ◽  
Edcleide Maria Araújo ◽  
...  
Keyword(s):  
Tensile Properties ◽  
Melt Crystallization ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
Stress Cracking ◽  
Environmental Stress Cracking ◽  
Naoh Solution ◽  
Pet Crystallization ◽  
Harmful Effects ◽  
Thermal Stability Of

The aim of the present work is to evaluate the effect of NaOH solution as a stress cracking agent on the thermal and tensile properties of PET and PET/ZnO composites. The solutions were applied during tensile testing and the effects were monitored by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and testing the actual mechanical properties. The rate of crystallization was increased when the samples were exposed to NaOH, as observed by both cold and melt crystallization; this is possibly due to the reduction in molar mass of the PET molecules caused by NaOH. During melting, the DSC peaks became more complex, which is probably due to the distinct macromolecular mass, as well as crystallites with different sizes and levels of perfection. According to TGA analyses, no drastic changes were observed on the thermal stability of PET due to the action of NaOH. The tensile properties were shown to decrease drastically upon exposure to NaOH, which is the main symptom of stress cracking, leading to increased fragility, as also observed in the scanning electron microscopy (SEM) images. The presence of ZnO improved PET crystallization and provided some protection against the harmful effects of NaOH.

Preparation, characterization, and properties of polystyrene/Na-montmorillonite composites

2018 ◽  
Vol 32 (8) ◽  
pp. 1078-1091 ◽  
Author(s):  
Sibel Erol Dağ ◽  
Pınar Acar Bozkurt ◽  
Fatma Eroğlu ◽  
Meltem Çelik
Keyword(s):  
Electron Microscopy ◽  
Interlayer Spacing ◽  
Decomposition Temperature ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
Specific Pore Volume ◽  
Transmission Electron ◽  
Thermal Stability Of

A series of polystyrene (PS)/unmodified Na-montmorillonite (Na-MMT) composites were prepared via in situ radical polymerization. The prepared composites were characterized using various techniques. The presence of various functional groups in the unmodified Na-MMT and PS/unmodified Na-MMT composite was confirmed by Fourier transform infrared spectroscopy. Morphology and particle size of prepared composites was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). According to the XRD and TEM results, the interlayer spacing of MMT layers was expanded. SEM images showed a spongy and porous-shaped morphology of composites. TEM revealed the Na-MMT intercalated in PS matrix. The thermal stability of PS/unmodified Na-MMT composites was significantly improved as compared to PS, which is confirmed using thermogravimetric analysis (TGA). The TGA curves indicated that the decomposition temperature of composites is higher at 24–51°C depending on the composition of the mixture than that of pure PS. The differential scanning calorimetry (DSC) results showed that the glass transition temperature of composites was higher as compared to PS. The moisture retention, water uptake, Brunauer–Emmett–Teller specific surface area, and specific pore volume of composites were also investigated. Water resistance of the composites can be greatly improved.

scholarly journals Thermal and Structural Analysis of Epoxidized Jatropha Oil and Alkaline Treated Kenaf Fiber Reinforced Poly(Lactic Acid) Biocomposites

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2604
Author(s):  
Siti Hasnah Kamarudin ◽  
Luqman Chuah Abdullah ◽  
Min Min Aung ◽  
Chantara Thevy Ratnam
Keyword(s):  
Lactic Acid ◽  
Thermal Properties ◽  
Alkaline Treatment ◽  
Poly Lactic Acid ◽  
Jatropha Oil ◽  
Scanning Calorimetry ◽  
Kenaf Fiber ◽  
Chain Mobility ◽  
Naoh Solution ◽  
Thermal Stability Of

New environmentally friendly plasticized poly(lactic acid) (PLA) kenaf biocomposites were obtained through a melt blending process from a combination of epoxidized jatropha oil, a type of nonedible vegetable oil material, and renewable plasticizer. The main objective of this study is to investigate the effect of the incorporation of epoxidized jatropha oil (EJO) as a plasticizer and alkaline treatment of kenaf fiber on the thermal properties of PLA/Kenaf/EJO biocomposites. Kenaf fiber was treated with 6% sodium hydroxide (NaOH) solution for 4 h. The thermal properties of the biocomposites were analyzed using a differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). It must be highlighted that the addition of EJO resulted in a decrease of glass transition temperature which aided PLA chain mobility in the blend as predicted. TGA demonstrated that the presence of treated kenaf fiber together with EJO in the blends reduced the rate of decomposition of PLA and enhanced the thermal stability of the blend. The treatment showed a rougher surface fiber in scanning electron microscopy (SEM) micrographs and had a greater mechanical locking with matrix, and this was further supported with Fourier-transform infrared spectroscopy (FTIR) analysis. Overall, the increasing content of EJO as a plasticizer has improved the thermal properties of PLA/Kenaf/EJO biocomposites.

Thermal Stability of N-Heterocycle-Stabilized Iodanes – A Systematic Investigation

2019 ◽  
Author(s):  
Andreas Boelke ◽  
Yulia A. Vlasenko ◽  
Mekhman S. Yusubov ◽  
Boris Nachtsheim ◽  
Pavel Postnikov
Keyword(s):  
Thermal Stability ◽  
Differential Scanning Calorimetry ◽  
Thermogravimetric Analysis ◽  
Systematic Investigation ◽  
Scanning Calorimetry ◽  
Thermal Stability Of

<p>The thermal stability of pseudocyclic and cyclic <i>N</i>-heterocycle-stabilized (hydroxy)aryl- and mesityl(aryl)-l<sup>3</sup>-iodanes (NHIs) through thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) is investigated. NHIs bearing <i>N</i>-heterocycles with a high N/C-ratio such as triazoles show among the lowest descomposition temperatures and the highest decomposition energies. A comparison of NHIs with known (pseudo)cyclic benziodoxolones is made and we further correlated their thermal stability with reactivity in a model oxygenation. </p>

The Development of Pemetrexed Diacid-Loaded Gelatin-Cloisite 30B (MMT) Nanocomposite for Improved Oral Efficacy Against Cancer: Characterization, In-Vitro and Ex-Vivo Assessment

2020 ◽  
Vol 17 (3) ◽  
pp. 246-256
Author(s):  
Kriti Soni ◽  
Ali Mujtaba ◽  
Md. Habban Akhter ◽  
Kanchan Kohli
Keyword(s):  
Drug Release ◽  
Oral Delivery ◽  
Ex Vivo ◽  
Confocal Laser ◽  
Release Mechanism ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
Cloisite 30B ◽  
Ft Ir

Aim: The intention of this investigation was to develop Pemetrexed Diacid (PTX)-loaded gelatine-cloisite 30B (MMT) nanocomposite for the potential oral delivery of PTX and the in vitro, and ex vivo assessment. Background: Gelatin/Cloisite 30 B (MMT) nanocomposites were prepared by blending gelatin with MMT in aqueous solution. Methods: PTX was incorporated into the nanocomposite preparation. The nanocomposites were investigated by Fourier Transmission Infra Red Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC), Scanning Electron Microscope (SEM) X-Ray Diffraction (XRD) and Confocal Laser Microscopy (CLSM). FT-IR of nanocomposite showed the disappearance of all major peaks which corroborated the formation of nanocomposites. The nanocomposites were found to have a particle size of 121.9 ± 1.85 nm and zeta potential -12.1 ± 0.63 mV. DSC thermogram of drug loaded nanocomposites indicated peak at 117.165 oC and 205.816 oC, which clearly revealed that the drug has been incorporated into the nanocomposite because of cross-linking of cloisite 30 B and gelatin in the presence of glutaraldehyde. Results: SEM images of gelatin show a network like structure which disappears in the nanocomposite. The kinetics of the drug release was studied in order to ascertain the type of release mechanism. The drug release from nanocomposites was in a controlled manner, followed by first-order kinetics and the drug release mechanism was found to be of Fickian type. Conclusion: Ex vivo gut permeation studies revealed 4 times enhancement in the permeation of drug present in the nanocomposite as compared to plain drug solution and were further affirmed by CLSM. Thus, gelatin/(MMT) nanocomposite could be promising for the oral delivery of PTX in cancer therapy and future prospects for the industrial pharmacy.

Sign in / Sign up

Export Citation Format

Share Document