scholarly journals Effect of Printing Parameters on Dimensional Error and Surface Roughness Obtained in Direct Ink Writing (DIW) Processes

Materials ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2157
Author(s):  
Irene Buj-Corral ◽  
Alejandro Domínguez-Fernández ◽  
Ana Gómez-Gejo
Keyword(s):  
Desirability Function ◽  
Roughness Parameter ◽  
Ceramic Materials ◽  
Machining Processes ◽  
Dimensional Error ◽  
Hip Prostheses ◽  
Layer Height ◽  
Direct Ink Writing ◽  
Bed Temperature ◽  
Printing Speed

Prostheses made from ceramic materials have the advantages of producing little debris and having good durability, compared with those made from metal and plastic. For example, hip prostheses require a porous external area that allows their fixation by means of osseointegration and a solid internal area that will be in contact with the femoral head. The manufacturing of complex ceramic shapes, by means of machining processes, for example, is complicated and can lead to breakage of the parts because of their fragility. The direct ink writing (DIW) process allows the printing of ceramic pastes into complex shapes that achieve their final strength after a heat treatment operation. This paper studies both the dimensional error and surface finish of porous zirconia prismatic parts prior to sintering. The variables considered are infill, layer height, printing speed, extrusion multiplier and bed temperature. The responses are the dimensional error of the lateral walls of the samples and an areal roughness parameter, the arithmetical mean height, Sa. Mathematical models are found for each response, and multiobjective optimization is carried out by means of the desirability function. The dimensional error depends mainly on the interaction between layer height and infill, while the roughness on the interaction between infill and printing speed. Thus, infill is an important factor for both responses. In the future, the behavior of compact printed parts will be addressed.

Diamond Coated End Mills in Machining Silicon Carbide

2012 ◽  
Vol 576 ◽  
pp. 531-534 ◽  
Author(s):  
Mohamed Konneh ◽  
Mohammad Iqbal ◽  
Nik Mohd Azwan Faiz
Keyword(s):  
Surface Roughness ◽  
Silicon Carbide ◽  
High Performance ◽  
Removal Rate ◽  
Roughness Parameter ◽  
Surface Damage ◽  
Ceramic Materials ◽  
Real Problem ◽  
Machining Parameters ◽  
Machining Processes

Silicon Carbide (SiC) is a type of ceramic that belongs to the class of hard and brittle material. Machining of ceramic materials can result in surface alterations including rough surface, cracks, subsurface damage and residual stresses. Efficient milling of high performance ceramic involves the selection of appropriate operating parameters to maximize the material removal rate (MRR) while maintaining the low surface finish and limiting surface damage. SiC being a ceramic material, its machining poses a real problem due to its low fracture toughness, making it very sensitive to crack. The paper discusses milling of silicon carbide using diamond coated end mill under different machining conditions in order to determine the surface roughness parameter, Rt after the machining processes and to establish a relationship between the machining parameters and response variables. Based on the surface roughness carried out the lowest Rt obtained is 0.46 µm.

Mechanical properties of an additive manufactured CF-PLA/ABS hybrid composite sheet

2019 ◽  
pp. 089270571986940
Author(s):  
Syed Waqar Ahmed ◽  
Ghulam Hussain ◽  
Khalid A Al-Ghamdi ◽  
Khurram Altaf
Keyword(s):  
Fused Deposition Modeling ◽  
Mechanical Performance ◽  
Hybrid Composites ◽  
Desirability Function ◽  
Acrylonitrile Butadiene Styrene ◽  
Composite Sheet ◽  
Layer Height ◽  
Fused Deposition ◽  
Laminar Composites ◽  
Printing Speed

Laminar composites have widespread applications in the automotive and aircraft industry. This research was aimed to investigate the suitability of fused deposition modeling to produce multi-material laminar composites. Composites comprising of two dissimilar laminates, named as hybrid composites, were printed from acrylonitrile butadiene styrene filament and carbon fiber-reinforced polylactic acid filament (a composite filament) by varying different printing parameters. Tensile tests were conducted to examine the mechanical performance of the produced composite sheet. A detailed analysis of the results revealed that a high ultimate tensile strength is primarily achieved by setting low values of printing speed, layer height, and clad ratio while high elongation is obtained by employing low printing speed, medium layer height, and high clad ratio. The optimum printing conditions were sought out through desirability function with an objective to simultaneously enhance all the considered properties. Further, the composite sheet exhibited a reasonably good combination of tensile properties as compared to its monolithic constituent sheets. Based on the results, it is concluded that the bi-material laminating approach employed herein can produce printed structures with desired properties.

Effects of process parameters on compressive property of FDM with ABS

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Supphachai Nathaphan ◽  
Worrasid Trutassanawin
Keyword(s):  
Yield Stress ◽  
Process Parameters ◽  
Dimensional Accuracy ◽  
Optimum Process ◽  
Content Type ◽  
Layer Height ◽  
Compressive Yield Stress ◽  
Bed Temperature ◽  
Nozzle Temperature ◽  
Printing Speed

Purpose This work aims to investigate the interaction effects of printing process parameters of acrylonitrile butadiene styrene (ABS) parts fabricated by fused deposition modeling (FDM) technology on both the dimensional accuracy and the compressive yield stress. Another purpose is to determine the optimum process parameters to achieve the maximum compressive yield stress and dimensional accuracy at the same time. Design/methodology/approach The standard cylindrical specimens which produced from ABS by using an FDM 3D printer were measured dimensions and tested compressive yield stresses. The effects of six process parameters on the dimensional accuracy and compressive yield stress were investigated by separating the printing orientations into horizontal and vertical orientations before controlling five factors: nozzle temperature, bed temperature, number of shells, layer height and printing speed. After that, the optimum process parameters were determined to accomplish the maximum compressive yield stress and dimensional accuracy simultaneously. Findings The maximum compressive properties were achieved when layer height, printing speed and number of shells were maintained at the lowest possible values. The bed temperature should be maintained 109°C and 120°C above the glass transition temperature for horizontal and vertical orientations, respectively. Practical implications The optimum process parameters should result in better FDM parts with the higher dimensional accuracy and compressive yield stress, as well as minimal post-processing and finishing techniques. Originality/value The important process parameters were prioritized as follows: printing orientation, layer height, printing speed, nozzle temperature and bed temperature. However, the number of shells was insignificant to the compressive property and dimensional accuracy. Nozzle temperature, bed temperature and number of shells were three significant process parameters effects on the dimensional accuracy, while layer height, printing speed and nozzle temperature were three important process parameters influencing compressive yield stress. The specimen fabricated in horizontal orientation supported higher compressive yield stress with wide processing ranges of nozzle and bed temperatures comparing to the vertical orientation with limited ranges.

scholarly journals Effect of Printing Parameters on Dimensional Error, Surface Roughness and Porosity of FFF Printed Parts with Grid Structure

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1213
Author(s):  
Irene Buj-Corral ◽  
Ali Bagheri ◽  
Maurici Sivatte-Adroer
Keyword(s):  
Flow Rate ◽  
Desirability Function ◽  
Low Cost ◽  
Multi Objective Optimization ◽  
Grid Structure ◽  
Fused Filament Fabrication ◽  
Dimensional Error ◽  
Layer Height ◽  
Multi Objective ◽  
Printing Parameters

Extrusion printing processes allow for manufacturing complex shapes in a relatively cheap way with low-cost machines. The present study analyzes the effect of printing parameters on dimensional error, roughness, and porosity of printed PLA parts obtained with grid structure. Parts are obtained by means of the fused filament fabrication (FFF) process. Four variables are chosen: Layer height, temperature, speed, and flow rate. A two-level full factorial design with a central point is used to define the experimental tests. Dimensional error and porosity are measured with a profile projector, while roughness is measured with a contact roughness meter. Mathematical regression models are found for each response, and multi-objective optimization is carried out by means of the desirability function. Dimensional error and roughness depend mainly on layer height and flow rate, while porosity depends on layer height and printing speed. Multi-objective optimization shows that recommended values for the variables are layer height 0.05 mm, temperature 195 ºC, speed 50 mm/min, and flow rate 0.93, when dimensional error and roughness are to be minimized, and porosity requires a target value of 60%. The present study will help to select appropriate printing parameters for printing porous structures such as those found in prostheses, by means of extrusion processes.

scholarly journals Modeling of the Influence of Input AM Parameters on Dimensional Error and Form Errors in PLA Parts Printed with FFF Technology

Polymers ◽  
2021 ◽  
Vol 13 (23) ◽  
pp. 4152
Author(s):  
Carmelo J. Luis-Pérez ◽  
Irene Buj-Corral ◽  
Xavier Sánchez-Casas
Keyword(s):  
Surface Roughness ◽  
Process Parameters ◽  
Desirability Function ◽  
Nozzle Diameter ◽  
Simultaneous Optimization ◽  
Acetabular Cup ◽  
Fused Filament Fabrication ◽  
Dimensional Error ◽  
Layer Height ◽  
Form Errors

As is widely known, additive manufacturing (AM) allows very complex parts to be manufactured with porous structures at a relatively low cost and in relatively low manufacturing times. However, it is necessary to determine in a precise way the input values that allow better results to be obtained in terms of microgeometry, form errors, and dimensional error. In an earlier work, the influence of the process parameters on surface roughness obtained in fused filament fabrication (FFF) processes was analyzed. This present study focuses on form errors as well as on dimensional error of hemispherical cups, with a similar shape to that of the acetabular cup of hip prostheses. The specimens were 3D printed in polylactic acid (PLA). Process variables are nozzle diameter, temperature, layer height, print speed, and extrusion multiplier. Their influence on roundness, concentricity, and dimensional error is considered. To do this, adaptive neuro-fuzzy inference systems (ANFIS) models were used. It was observed that dimensional error, roundness, and concentricity depend mainly on the nozzle diameter and on layer height. Moreover, high nozzle diameter of 0.6 mm and high layer height of 0.3 mm are not recommended. A desirability function was employed along with the ANFIS models in order to determine the optimal manufacturing conditions. The main aim of the multi-objective optimization study was to minimize average surface roughness (Ra) and roundness, while dimensional error was kept within the interval Dimensional Error≤0.01. When the simultaneous optimization of both the internal and the external surface of the parts is performed, it is recommended that a nozzle diameter of 0.4 mm be used, to have a temperature of 197 °C, a layer height of 0.1 mm, a print speed of 42 mm/s, and extrusion multiplier of 94.8%. This study will help to determine the influence of the process parameters on the quality of the manufactured parts.

Investigation and Characterization of Clay Mixture Feedstock for Extrusion-Based Additive Manufacturing

2020 ◽  
Author(s):  
Tawaddod Alkindi ◽  
Mozah Alyammahi ◽  
Rahmat Agung Susantyoko
Keyword(s):  
Cost Efficiency ◽  
Ceramic Materials ◽  
3D Printer ◽  
Mixing Processes ◽  
Ceramic Components ◽  
Computer Controlled ◽  
Continuous Material ◽  
Printing Speed

Abstract The extrusion-based AM technique has been recently employed for rapid ceramic components fabrication due to scalability and cost-efficiency. This paper investigated aspects of the extrusion technique to print ceramic materials. Specifically, we assessed and developed a process recipe of the formulations (the composition of water and ethanol-based clay mixtures) and mixing processes. Different clay paste formulations were prepared by varying clay, water, ethanol ratios. The viscosity of clay paste was measured using a DV3T Viscometer. Afterward, the produced clay paste was used as a feedstock for WASP Delta 60100 3D printer for computer-controlled extrusion deposition. We evaluated the quality of the clay paste based on (i) pumpability, (ii) printability, and (iii) buildability. Pressure and flow rate were monitored to assess the pumpability. The nozzle was monitored for continuous material extrusion to assess printability. The maximum layer-without-collapse height was monitored to assess the buildability. This study correlated the mixture composition and process parameters, to the viscosity of the mixture, at the same printing speed. We found that 85 wt% clay, 5 wt% water, 10 wt% ethanol paste formulation, with the viscosity of 828000 cP, 202400 cP, 40400 cP at 1, 5, and 50 rpm, respectively, demonstrates good pumpability, as well as best printability and buildability.

scholarly journals Fatigue Performance of ABS Specimens Obtained by Fused Filament Fabrication

Materials ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 2521 ◽  
Author(s):  
Miquel Domingo-Espin ◽  
J. Antonio Travieso-Rodriguez ◽  
Ramon Jerez-Mesa ◽  
Jordi Lluma-Fuentes
Keyword(s):  
Acrylonitrile Butadiene Styrene ◽  
Experimental Phase ◽  
Fused Filament Fabrication ◽  
Layer Height ◽  
Bending Stresses ◽  
Best Parameter ◽  
End Use ◽  
Design And Manufacture ◽  
Printing Speed ◽  
Butadiene Styrene

In this paper, the fatigue response of fused filament fabrication (FFF) Acrylonitrile butadiene styrene (ABS) parts is studied. Different building parameters (layer height, nozzle diameter, infill density, and printing speed) were chosen to study their influence on the lifespan of cylindrical specimens according to a design of experiments (DOE) using the Taguchi methodology. The same DOE was applied on two different specimen sets using two different infill patterns—rectilinear and honeycomb. The results show that the infill density is the most important parameter for both of the studied patterns. The specimens manufactured with the honeycomb pattern show longer lifespans. The best parameter set associated to that infill was chosen for a second experimental phase, in which the specimens were tested under different maximum bending stresses so as to construct the Wöhler curve associated with this 3D printing configuration. The results of this study are useful to design and manufacture ABS end-use parts that are expected to work under oscillating periodic loads.

Micro Machining of Nonconductive Al2O3 Ceramic on Developed TW-ECSM Setup

2012 ◽  
pp. 167-177
Author(s):  
Alakesh Manna ◽  
Amandeep Kundal
Keyword(s):  
Weight Ratio ◽  
High Hardness ◽  
High Strength ◽  
Ceramic Materials ◽  
Actual Condition ◽  
Test Results ◽  
Machining Performance ◽  
Machining Processes ◽  
Al2o3 Ceramic ◽  
Advanced Ceramic

Advanced ceramic materials are gradually becoming very important for their superior properties such as high hardness, wear resistance, chemical resistance, and high strength to weight ratio. But machining of advanced ceramic like Al2O3-ceramics is very difficult by any well known and common machining processes. Normally, cleavages and triangular fractures generate when machining of these materials is done by traditional machining methods. It is essential to develop an efficient and accurate machining method for processing advanced ceramic materials. For effective machining of Al2O3-ceramics, a traveling wire electrochemical spark machining (TW-ECSM) setup has been developed. The developed TW-ECSM setup has been utilized to machine Al2O3 ceramic materials and subsequently test results are utilized to analyze the machining performance characteristic. Different SEM photographs show the actual condition of the micro machined surfaces. The practical research analysis and test results on the machining of Al2O3 ceramics by developed TWECSM setup will provide a new guideline to the researchers and manufacturing engineers.

Micro Machining of Nonconductive Al2O3 Ceramic on Developed TW-ECSM Setup

2011 ◽  
Vol 1 (2) ◽  
pp. 46-55
Author(s):  
Alakesh Manna ◽  
Amandeep Kundal
Keyword(s):  
Weight Ratio ◽  
High Hardness ◽  
High Strength ◽  
Ceramic Materials ◽  
Actual Condition ◽  
Test Results ◽  
Machining Performance ◽  
Machining Processes ◽  
Al2o3 Ceramic ◽  
Advanced Ceramic

Advanced ceramic materials are gradually becoming very important for their superior properties such as high hardness, wear resistance, chemical resistance, and high strength to weight ratio. But machining of advanced ceramic like Al2O3-ceramics is very difficult by any well known and common machining processes. Normally, cleavages and triangular fractures generate when machining of these materials is done by traditional machining methods. It is essential to develop an efficient and accurate machining method for processing advanced ceramic materials. For effective machining of Al2O3-ceramics, a traveling wire electrochemical spark machining (TW-ECSM) setup has been developed. The developed TW-ECSM setup has been utilized to machine Al2O3 ceramic materials and subsequently test results are utilized to analyze the machining performance characteristic. Different SEM photographs show the actual condition of the micro machined surfaces. The practical research analysis and test results on the machining of Al2O3 ceramics by developed TWECSM setup will provide a new guideline to the researchers and manufacturing engineers.

scholarly journals The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites

Designs ◽  
2019 ◽  
Vol 3 (4) ◽  
pp. 50 ◽  
Author(s):  
Athanasios Goulas ◽  
Shiyu Zhang ◽  
Darren A. Cadman ◽  
Jan Järveläinen ◽  
Ville Mylläri ◽  
...  
Keyword(s):  
3D Printing ◽  
Process Parameters ◽  
Relative Permittivity ◽  
Main Process ◽  
Fused Filament Fabrication ◽  
Layer Height ◽  
Additive Manufacturing Technology ◽  
The Impact ◽  
Printing Speed ◽  
Hatch Spacing

Fused filament fabrication (FFF) is a well-known and greatly accessible additive manufacturing technology, that has found great use in the prototyping and manufacture of radiofrequency componentry, by using a range of composite thermoplastic materials that possess superior properties, when compared to standard materials for 3D printing. However, due to their nature and synthesis, they are often a great challenge to print successfully which in turn affects their microwave properties. Hence, determining the optimum printing strategy and settings is important to advance this area. The manufacturing study presented in this paper shows the impact of the main process parameters: printing speed, hatch spacing, layer height and material infill, during 3D printing on the relative permittivity (εr), and loss tangent (tanδ) of the resultant additively manufactured test samples. A combination of process parameters arising from this study, allowed successful 3D printing of test samples, that marked a relative permittivity of 9.06 ± 0.09 and dielectric loss of 0.032 ± 0.003.

Sign in / Sign up

Export Citation Format

Share Document