scholarly journals The Effects of Fineness and TEA-Based Chemical Admixture on Early Strength Development of Concrete in Construction Site Applications

Materials ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2027
Author(s):  
Taegyu Lee ◽  
Jaehyun Lee ◽  
Hyeonggil Choi ◽  
Dong-Eun Lee
Keyword(s):  
Portland Cement ◽  
Ordinary Portland Cement ◽  
Concrete Strength ◽  
Raw Material ◽  
Strength Development ◽  
Type I ◽  
Chemical Admixtures ◽  
Chemical Admixture ◽  
Early Strength ◽  
Time Required

This study examines effects of cement fineness and chemical admixtures of early strength agents on the early strength development of concrete. Three cement types were selected, namely ASTM type-I ordinary Portland cement (OPC), fineness ordinary Portland cement (FOPC), and ASTM type-III early Portland cement (EPC), and the mixing proportions of concrete were set by adding a triethanolamine-based chemical admixture to FOPC. The evaluation items considered in this study included raw material analysis, compressive strength, and maturity (D∙h). The time required for the development of concrete strength of 5 MPa in the three cement types was estimated and compared. The results revealed that using FOPC enhances the strength development of concrete owing to its higher fineness and SO3 content compared to OPC. In addition, it has been observed that using both FOPC and TCA yields a similar performance to that observed using EPC, in light of the improved early strength development at low temperatures.

scholarly journals Effect of Formwork Removal Time Reduction on Construction Productivity Improvement by Mix Design of Early Strength Concrete

2020 ◽  
Vol 10 (20) ◽  
pp. 7046
Author(s):  
Taegyu Lee ◽  
Jaehyun Lee ◽  
Jinsung Kim ◽  
Hyeonggil Choi ◽  
Dong-Eun Lee
Keyword(s):  
Portland Cement ◽  
Concrete Strength ◽  
Raw Material ◽  
Temperature History ◽  
Unit Weight ◽  
Productivity Improvement ◽  
Study Materials ◽  
Removal Time ◽  
Early Strength ◽  
Time Required

In this study, we examined the effects of cement fineness, SO3 content, an accelerating agent, and chemical admixtures mixed with unit weights of cement on concrete early strength using concrete mixtures. C24 (characteristic value of concrete, 24 MPa) was used in the experiment conducted. Ordinary Portland cement (OPC), high fineness and SO3 OPC (HFS_OPC), and Early Portland cement (EPC) were selected as the study materials. The unit weights of cement were set to OPC 330, 350, and 380. Further, a concrete mixture was prepared with a triethanolamine (TEA)-based chemical admixture to HFS. A raw material analysis was conducted, and the compressive strength, temperature history, and maturity (D∙h) were examined. Then, the vertical formwork removal time was evaluated according to the criterion of each country. Finally, the time required to develop concrete strength of 5 MPa was estimated. Results showed that the early strength of concrete mixed with HFS and EPC was greater than that exhibited by concrete with an increased unit weight of cement with OPC. In addition, when HFS was used with EPC, its strength developed early, similar to the trend exhibited by EPC, even at low temperatures.

scholarly journals Strength development of cement-treated sand using different cement types cured at different temperatures

2018 ◽  
Vol 195 ◽  
pp. 01006
Author(s):  
Lanh Si Ho ◽  
Kenichiro Nakarai ◽  
Kenta Eguchi ◽  
Takashi Sasaki ◽  
Minoru Morioka
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Ordinary Portland Cement ◽  
Cement Content ◽  
Bound Water ◽  
Pozzolanic Reaction ◽  
Strength Development ◽  
Different Temperatures ◽  
Early Strength

This study aimed to investigate the strength development of cement-treated sand using different cement types: ordinary Portland cement (OPC), high early strength Portland cement (HPC), and moderate heat Portland cement (MPC) cured at different temperatures. The cementtreated sand specimens were prepared with 8% of cement content and cured under sealed conditions at 20οC and 40οC, and mortar specimens were also prepared for reference. The results showed that the compressive strength of cement-treated sand increased in order of MPC, OPC, and HPC under high curing temperatures. It was interesting that the compressive strength of the specimens using HPC was much larger than that of the specimen using OPC and MPC under 20οC due to the larger amount of chemically bound water. Additionally, it was revealed that under high curing temperatures, the pozzolanic reaction was accelerated in the cement-treated sand; this may be caused by the high proportions of sand in the mixtures.

scholarly journals Improving Marine Concrete Performance Based on Multiple Criteria Using Early Portland Cement and Chemical Superplasticizer Admixture

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 4903
Author(s):  
Taegyu Lee ◽  
Jaehyun Lee ◽  
Jaewook Jeong ◽  
Jaemin Jeong
Keyword(s):  
Portland Cement ◽  
Concrete Strength ◽  
Strength Development ◽  
Construction Productivity ◽  
Concrete Mix Design ◽  
Granulated Blast Furnace Slag ◽  
Chloride Resistance ◽  
Combined Use ◽  
Concrete Mix ◽  
Early Strength

This study sought to examine the performance design of concrete mix proportions to ensure chloride resistance and early strength with respect to C35 (35 MPa), which is the minimum compressive strength class of concrete used in a marine environment. For the proposed concrete mixture, C24 (24 MPa) was selected and binders for concrete were manufactured using a blend of OPC (ordinary Portland cement), EPC (early Portland cement), and GGBS (ground granulated blast-furnace slag). The results of the experiment confirmed that the combined use of EPC and GGBS greatly improve the early-strength development and chloride resistance of concrete. An analysis revealed that the time for removal of forms can be reduced by 5–9 h from the aspect of early concrete strength. Moreover, in terms of construction productivity, EPC and GGBS were reduced by up to 16.39 h/cycle compared to other concretes. Regarding economic and environmental impacts, EPC and GGBS were more effective than C35 concrete. This study is significant as its findings help make it possible to examine the most economical concrete mix design in relation to strength development according to the application of EPC, GGBS, and PC-based admixtures.

scholarly journals A Review of the Mechanical Properties and Durability of Ecological Concretes in a Cold Climate in Comparison to Standard Ordinary Portland Cement-Based Concrete

Materials ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 3467
Author(s):  
Ankit Kothari ◽  
Karin Habermehl-Cwirzen ◽  
Hans Hedlund ◽  
Andrzej Cwirzen
Keyword(s):  
Carbon Dioxide ◽  
Portland Cement ◽  
Ordinary Portland Cement ◽  
Cementitious Materials ◽  
Cold Climate ◽  
Supplementary Cementitious Materials ◽  
Short Exposure ◽  
Chemical Admixtures ◽  
Composite Cements ◽  
Alkali Activated

Most of the currently used concretes are based on ordinary Portland cement (OPC) which results in a high carbon dioxide footprint and thus has a negative environmental impact. Replacing OPCs, partially or fully by ecological binders, i.e., supplementary cementitious materials (SCMs) or alternative binders, aims to decrease the carbon dioxide footprint. Both solutions introduced a number of technological problems, including their performance, when exposed to low, subfreezing temperatures during casting operations and the hardening stage. This review indicates that the present knowledge enables the production of OPC-based concretes at temperatures as low as −10 °C, without the need of any additional measures such as, e.g., heating. Conversely, composite cements containing SCMs or alkali-activated binders (AACs) showed mixed performances, ranging from inferior to superior in comparison with OPC. Most concretes based on composite cements require pre/post heat curing or only a short exposure to sub-zero temperatures. At the same time, certain alkali-activated systems performed very well even at −20 °C without the need for additional curing. Chemical admixtures developed for OPC do not always perform well in other binder systems. This review showed that there is only a limited knowledge on how chemical admixtures work in ecological concretes at low temperatures and how to accelerate the hydration rate of composite cements containing high amounts of SCMs or AACs, when these are cured at subfreezing temperatures.

scholarly journals Strength Development and Elemental Distribution of Dolomite/Fly Ash Geopolymer Composite under Elevated Temperature

Materials ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 1015 ◽  
Author(s):  
Emy Aizat Azimi ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Petrica Vizureanu ◽  
Mohd Arif Anuar Mohd Salleh ◽  
Andrei Victor Sandu ◽  
...  
Keyword(s):  
Elevated Temperature ◽  
Fly Ash ◽  
Portland Cement ◽  
Ordinary Portland Cement ◽  
Raw Materials ◽  
Liquid Sodium ◽  
Strength Development ◽  
Elemental Distribution ◽  
Distribution Analysis ◽  
Geopolymer Composites

A geopolymer has been reckoned as a rising technology with huge potential for application across the globe. Dolomite refers to a material that can be used raw in producing geopolymers. Nevertheless, dolomite has slow strength development due to its low reactivity as a geopolymer. In this study, dolomite/fly ash (DFA) geopolymer composites were produced with dolomite, fly ash, sodium hydroxide, and liquid sodium silicate. A compression test was carried out on DFA geopolymers to determine the strength of the composite, while a synchrotron Micro-Xray Fluorescence (Micro-XRF) test was performed to assess the elemental distribution in the geopolymer composite. The temperature applied in this study generated promising properties of DFA geopolymers, especially in strength, which displayed increments up to 74.48 MPa as the optimum value. Heat seemed to enhance the strength development of DFA geopolymer composites. The elemental distribution analysis revealed exceptional outcomes for the composites, particularly exposure up to 400 °C, which signified the homogeneity of the DFA composites. Temperatures exceeding 400 °C accelerated the strength development, thus increasing the strength of the DFA composites. This appears to be unique because the strength of ordinary Portland Cement (OPC) and other geopolymers composed of other raw materials is typically either maintained or decreases due to increased heat.

A trial construction of high durability railway viaducts with local aggregates

2019 ◽  
Author(s):  
Kotaro Kawamura ◽  
Joe Takemura ◽  
Shigenobu Iguchi ◽  
Tsutomu Yoshida ◽  
Masashi Kobayashi
Keyword(s):  
Fly Ash ◽  
Side Effects ◽  
Portland Cement ◽  
Ordinary Portland Cement ◽  
The Other ◽  
Strength Concrete ◽  
High Durability ◽  
Sound Barrier ◽  
Early Strength ◽  
Structural Measure

<p>We are carrying out a construction project of new railroad viaducts. These new railroad viaducts are constructing using about 110,000 m<span>3</span> volume concrete. In this construction place, it is difficult for us to get low ASR-reactive aggregates and it is expected to be supplied with snowmelt water on the viaducts in winter. Then we tested ASR-reactive these local aggregates and found an effective mixed ratio of fly-ash is 20% of cement. On the other hand, various side effects were also expected by using fly-ash. For example, initial cracking due to contraction, early strength concrete, bleeding, etc. Therefore, we repeated various tests and examined and carried out a method that could ensure the same construction method and quality as when using ordinary Portland cement, even with fly-ash. Also, we adopted a structure that is unlikely to be affected by rainwater as a structural measure. For example, the entire adoption of a ramen type viaduct that has eliminated bearings, adoption of FRP sound barrier, etc. Then we made it possible to build highly durable railway viaducts by these various measures of materials and structures.</p>

scholarly journals Chloride Ingress in Chemically Activated Calcined Clay-Based Cement

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Joseph Mwiti Marangu ◽  
Joseph Karanja Thiong’o ◽  
Jackson Muthengia Wachira
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Ordinary Portland Cement ◽  
Strength Development ◽  
Chloride Ingress ◽  
Calcined Clay ◽  
Apparent Diffusion Coefficients ◽  
Apparent Diffusion ◽  
Lower Porosity ◽  
Lower Chloride

Chloride-laden environments pose serious durability concerns in cement based materials. This paper presents the findings of chloride ingress in chemically activated calcined Clay-Ordinary Portland Cement blended mortars. Results are also presented for compressive strength development and porosity tests. Sampled clays were incinerated at a temperature of 800°C for 4 hours. The resultant calcined clay was blended with Ordinary Portland Cement (OPC) at replacement level of 35% by mass of OPC to make test cement labeled PCC35. Mortar prisms measuring 40 mm × 40 mm × 160 mm were cast using PCC35 with 0.5 M Na2SO4 solution as a chemical activator instead of water. Compressive strength was determined at 28th day of curing. As a control, OPC, Portland Pozzolana Cement (PPC), and PCC35 were similarly investigated without use of activator. After the 28th day of curing, mortar specimens were subjected to accelerated chloride ingress, porosity, compressive strength tests, and chloride profiling. Subsequently, apparent diffusion coefficients (Dapp) were estimated from solutions to Fick’s second law of diffusion. Compressive strength increased after exposure to the chloride rich media in all cement categories. Chemically activated PCC35 exhibited higher compressive strength compared to nonactivated PCC35. However, chemically activated PCC35 had the least gain in compressive strength, lower porosity, and lower chloride ingress in terms of Dapp, compared to OPC, PPC, and nonactivated PCC35.

scholarly journals Effect of Metakaolin on early Strength of GGBS Ternary Concrete

2014 ◽  
Vol 584-586 ◽  
pp. 1551-1557
Author(s):  
Noor Azline Mohd Nasir ◽  
M.J. McCarthy
Keyword(s):  
Adverse Effect ◽  
Portland Cement ◽  
Strength Development ◽  
Replacement Level ◽  
Cement Replacement ◽  
Experimental Programme ◽  
Early Strength

The article reports a laboratory experimental programme that investigated effect of metakaolin on the early strength of concrete made with ternary combinations of Portland cement (CEM I) with ground granulated blast slag (GGBS) and metakaolin (MK). The various level of cement combinations (65%CEM I+30%GGBS+5%MK, 45%CEM I+45%GGBS+10%MK and 45%CEM I+40%GGBS+15%MK) was examined in comparison to CEM I and equivalent GGBS binary concretes for up to 28 days. Results show that the reduction in early strength is greater with the higher cement replacement level. However, the ternary concrete containing 15%MK has minor increase in early strength compared to those with 10%MK but a significant increase in strength is examined at later age (28 days). It is concluded that the presence of MK compensates the adverse effect of GGBS at early strength development and improves the strength at later ages.

Estimation and Measurement of Porosity Change in Cement Paste

2010 ◽  
Author(s):  
Eunyong Lee ◽  
Haeryong Jung ◽  
Ki-jung Kwon ◽  
Do-Gyeum Kim
Keyword(s):  
Ionic Strength ◽  
Portland Cement ◽  
Cement Paste ◽  
Thermodynamic Model ◽  
Ordinary Portland Cement ◽  
Type I ◽  
Hydration Products ◽  
Cement Pastes ◽  
Porosity Change ◽  
Dissolution Reaction

Laboratory-scale experiments were performed to understand the porosity change of cement pastes. The cement pastes were prepared using commercially available Type-I ordinary Portland cement (OPC). As the cement pastes were exposed in water, the porosity of the cement pastes sharply increased; however, the slow decrease of porosity was observed as the dissolution period was extended more than 50 days. As expected, the dissolution reaction was significantly influenced by w/c raito and the ionic strength of solution. A thermodynamic model was applied to simulate the porosity change of the cement pastes. It was highly influenced by the depth of the cement pastes. There was porosity increase on the surface of the cement pastes due to dissolution of hydration products, such as portlandite, ettringite, and CSH. However, the decrease of porosity was estimated inside the cement pastes due to the precipitation of cement minerals.

Sign in / Sign up

Export Citation Format

Share Document