scholarly journals Investigation into the Effect of Thermal Treatment on the Obtaining of Magnetic Phases: Fe5Y, Fe23B6, Y2Fe14B and αFe within the Amorphous Matrix of Rapidly-Quenched Fe61+xCo10−xW1Y8B20 Alloys (Where x = 0, 1 or 2)

Materials ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 835 ◽  
Author(s):  
Petrica Vizureanu ◽  
Marcin Nabiałek ◽  
Andrei Victor Sandu ◽  
Bartłomiej Jeż
Keyword(s):  
Magnetic Properties ◽  
Crystallization Process ◽  
Isothermal Annealing ◽  
Amorphous Matrix ◽  
Magnetic Phase ◽  
X Ray Diffraction ◽  
Production Methods ◽  
Magnetic Phases ◽  
X Ray ◽  
Injection Casting

The paper presents the results of research on the structure and magnetic properties of Fe61+xCo10−xW1Y8B20 alloys (where x = 0, 1 or 2). The alloys were produced using two production methods with similar cooling rates: Injection casting and suction casting. The alloy samples produced were subjected to isothermal annealing at 940 K for 10 min. The structure of the materials was examined using X-ray diffraction. Isothermal annealing has led to the formation of various crystallization products depending on the chemical composition of the alloy and the structure of the alloy in a solidified state. In two cases, the product of crystallization was the hard magnetic phase Y2Fe14B. However, the mechanism of this phase formation was different in both cases. The magnetic properties of alloys were tested using a vibrating sample magnetometer and a Faraday magnetic balance. It is found that the grain crystallite size of the crystalline phases have a decisive influence on the value of the coercive field (especially in the case of hard magnetic phases). It has been shown that privileged areas can already be created during the production process. Their presence determines the crystallization process.

Influence of Alloying Additions on Enhancement of Soft Magnetic Properties Effect and Crystallization in FeXSiB (X=Cu, V, Co, Zr, Nb) Amorphous Alloys

2007 ◽  
Vol 130 ◽  
pp. 171-174 ◽  
Author(s):  
Z. Stokłosa ◽  
G. Badura ◽  
P. Kwapuliński ◽  
Józef Rasek ◽  
G. Haneczok ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Amorphous Alloys ◽  
Crystallization Process ◽  
Annealing Temperature ◽  
Magnetic Measurements ◽  
X Ray Diffraction ◽  
Soft Magnetic ◽  
X Ray ◽  
Second Stage ◽  
Transmission Electron

The crystallization and optimization of magnetic properties effects in FeXSiB (X=Cu, V, Co, Zr, Nb) amorphous alloys were studied by applying X-ray diffraction methods, high resolution transmission electron microscopy (HRTEM), resistometric and magnetic measurements. The temperatures of the first and the second stage of crystallization, the 1h optimization annealing temperature and the Curie temperature were determined for different amorphous alloys. Activation energies of crystallization process were obtained by applying the Kissinger method. The influence of alloy additions on optimization effect and crystallization processes was carefully examined.

FERROMAGNETIC RESONANCE STUDY OF AMORPHOUS AND NANOCRYSTALLINE Fe81B13.5Si3.5C2 RIBBONS

2009 ◽  
Vol 23 (16) ◽  
pp. 3391-3402
Author(s):  
WEERAPHAT PON-ON ◽  
PONGTIP WINOTAI ◽  
I-MING TANG
Keyword(s):  
Ferromagnetic Resonance ◽  
Resonance Line ◽  
Isothermal Annealing ◽  
Amorphous Matrix ◽  
X Ray Diffraction ◽  
X Ray ◽  
Diffusion Controlled ◽  
Nano Grains ◽  
Relative Change ◽  
Kinetics Of

The nanocrystallization process in amorphous Fe 81 B 13.5 Si 3.5 C 2 ribbons caused by isothermal annealing below the crystallization temperature is studied. X-ray diffraction and Mossbauer spectroscopy measurements are used to identify the formation of new Fe containing compounds such as the ribbons annealed at various temperatures. The ferromagnetic resonance measurements for an as-cast ribbon and the 495°, 525°C and 600°C annealed ribbons exhibit a resonance line at 63.64 mT for φ = 0°. The sample annealed at 425°C shows two resonance peaks at 95.45 mT and 295.46 mT. These are due to the nanocrystalline α– Fe(Si) phase. The resonance-line widths are seen to broaden after the ribbons are annealed at 495°C and 525°C, at which time, the amorphous matrix crystallizes into nano-grains of α– Fe(Si) , t– Fe 2 B and t– Fe 3 B phases. The kinetics of the crystallization is discussed in terms of the relative change in the line width of the samples annealed at 495°C for different annealing times. These results yielded an Avrami exponent, n of 0.84 which is consistent with diffusion-controlled growth with a nucleation rate close to zero.

Interdiffusion Kinetics and Magnetic Properties of TA-Permalloy Multilayers

1991 ◽  
Vol 232 ◽  
Author(s):  
I. Hashim ◽  
H. A. Atwater ◽  
K. T. Y. Kung ◽  
R. M. Valletta
Keyword(s):  
Magnetic Properties ◽  
Isothermal Annealing ◽  
Lattice Diffusion ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Short Period ◽  
Interface Roughening ◽  
Interdiffusion Kinetics ◽  
Kinetics Of

ABSTRACTThe interdiffusion kinetics of ultrahigh vacuum deposited Ta/Ni81Fe19 short-period multilayers films have been investigated, and changes in microstructure were related to magnetic properties. Small angle X-ray diffraction and transmission electron microscopy were used to study layer morphology evolution and interdiffusion during post-growth isothermal annealing in the temperature range 300 – 600°C. The kinetic analysis suggests that interface roughening due to grain growth, and grain-boundary mediated diffusion of Ta occurs concurrently at early anneal times in the Ni81Fe19 films. Subsequent grainboundary and lattice diffusion of Ta lead to a reduction of magnetization and increase in coercivity of Ni81Fe19.

scholarly journals Effect of Titanium Substitution on Magnetic Properties and Microstructure of Nanocrystalline Monophase Nd-Fe-B Magnets

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Wang Cong ◽  
Guo ZhiMeng ◽  
Sui YanLi ◽  
Bao XiaoQian ◽  
Chen ZhiAn
Keyword(s):  
Magnetic Properties ◽  
Crystallization Process ◽  
Annealing Treatment ◽  
Rapid Quenching ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Ti Substitution ◽  
Ti Addition ◽  
Titanium Substitution

Nd12.3Fe81.7−xTixB6.0  (x=0.5–3.0)ribbons have been prepared by rapid quenching and subsequent annealing treatment. Effect of Ti substitution and annealing treatment on the microstructure, magnetic properties, and crystallization behavior of the ribbons was systematically investigated by the methods of differential scanning calorimeter (DSC), X-ray diffraction (XRD), transmission electron microscopy (TEM), and vibrating sample magnetometer (VSM). It is found that Ti addition may increase the crystallization temperature and stabilize the amorphous phase. Ti element inhibits the grain growth during crystallization process and finally refines the microstructure. The exchange coupling interactions and magnetic properties of the ribbons increase with increasingxfrom 0.5 to 1 and then decrease with further increasingx≥1.5. Optimum magnetic properties with(BH)max⁡=151.6 kJ/m3,Hci=809.2 kA/m,Jr=1.02 T are achieved in the Nd12.3Fe80.7Ti1B6.0ribbons annealed at 600°C for 10 min.

Magnetic Phase Transition in the Csci Fesi Spacer in Fe/FeSi Multilayers

1995 ◽  
Vol 382 ◽  
Author(s):  
J. Dekoster ◽  
A. Vantomme ◽  
S. Degroote ◽  
R. Moons ◽  
G. Langouche
Keyword(s):  
Phase Transition ◽  
Magnetic Properties ◽  
Magnetic Phase Transition ◽  
Low Temperatures ◽  
Magnetic Phase ◽  
Ferromagnetic Coupling ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ion Channeling ◽  
Spacer Layer

ABSTRACTWe report the formation of the CsCI FeSi phase in Fe/FeSi multilayers with constant Fe thickness and varying FeSi layer thickness. The crystallographic and magnetic properties of this metastable FeSi phase are determined in thick (62 nm) epitaxial silicide layers with ion channeling, X-ray diffraction and Mossbauer spectroscopy measurements which clearly show that the CsCl phase becomes increasingly magnetic upon cooling down to 4.2 K. These results indicate that the transition from antiferromagnetic to ferromagnetic coupling observed at low temperatures in such multilayers is controlled by a magnetic phase transition in the FeSi spacer layer.

scholarly journals Effect of Transition Elements on the Thermal Stability of Glassy Alloys 82Al–16Fe–2TM (TM: Ti, Ni, Cu) Prepared by Mechanical Alloying

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3978
Author(s):  
Nguyen Thi Hoang Oanh ◽  
Do Nam Binh ◽  
Dung Dang Duc ◽  
Quyen Hoang Thi Ngoc ◽  
Nguyen Hoang Viet
Keyword(s):  
Thermal Stability ◽  
Crystallization Process ◽  
Amorphous Matrix ◽  
Intermetallic Phases ◽  
Transition Elements ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Glassy Alloys ◽  
Thermal Stability Of

In the present study, the thermal stability and crystallization behavior of mechanical alloyed metallic glassy Al82Fe16Ti2, Al82Fe16Ni2, and Al82Fe16Cu2 were investigated. The microstructure of the milled powders was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and differential scanning calorimetry (DSC). The results showed remarkable distinction in thermal stability of the alloys by varying only two atomic percentages of transition elements. Among them, Al82Fe16Ti2 alloy shows the highest thermal stability compared to the others. In the crystallization process, exothermal peaks corresponding to precipitation of fcc-Al and intermetallic phases from amorphous matrix were observed.

Crystallite Size and Magnetic Properties of HDDR Powders Obtained from PrFeCoBNb Alloys

2010 ◽  
Vol 660-661 ◽  
pp. 308-313
Author(s):  
S.C. Silva ◽  
José Hélio Duvaizem ◽  
Rubens Nunes de Faria Jr. ◽  
Hidetoshi Takiishi
Keyword(s):  
Electron Microscopy ◽  
Magnetic Properties ◽  
Magnetic Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Crystallite Sizes ◽  
Phase Quantification ◽  
Scanning Electron

The first goal of this work involved the study of HDDR powders obtained from annealed alloys with the general formula: PrxFe77.9-xCo16B6Nb0.1 (x = 12; 12.5; 13; 13.5 and 14). The alloys were processed at desorption / recombination temperature of 840°C. The highest magnetic properties were obtained with 13.5 at. % Pr (Br= 1000mT and µ0iHc= 890mT). The alloy with a minimum praseodymium content (12 at. %) exhibited the lowest magnetic properties (Br= 350mT e iHc= 120mT). The second aim of the work involved the characterization of HDDR powders using X-ray diffraction for phase quantification and mean crystallite sizes determination of the hard magnetic phase. The processed powders were characterized by scanning electron microscopy (SEM).

In Situ TEM Observation of Crystallization Process for LiNbO3 and NaNbO3

2010 ◽  
Vol 63 ◽  
pp. 47-51 ◽  
Author(s):  
Hiromi Nakano ◽  
Yoko Suyama
Keyword(s):  
Crystallization Process ◽  
Amorphous Matrix ◽  
X Ray Diffraction ◽  
Electronic Components ◽  
High Quality ◽  
X Ray ◽  
Transmission Electron ◽  
Small Crystals ◽  
Lower Temperature

Fabrication of advanced electronic components requires high-quality powders. In this work, nano-powders of Li or Na niobates are synthesized from (Li or Na)-Nb ethoxide by a sol-crystal method. A single crystal of (Li or Na)-Nb ethoxide is decomposed to an amorphous matrix below 473 K. Next, small crystals are grown by heating at the appropriate temperature for each specimen. The sol-crystal method provides homogeneous quality and fine grains by heating at lower temperature. Structural analysis of the powders is performed by a transmission electron microscope (TEM) and X-ray diffraction. As a result, LiNbO3 turns to dense-powders, but NaNbO3 forms nano-porous powders. In order to understand this difference, we try to observe in-situ the crystallization and grain growth processes by high-temperature TEM. We successfully observe in-situ this processing and discuss the structural change and formation mechanism of LiNbO3, comparing these features with those of NaNbO3.

scholarly journals Synthesis and Magnetic Properties of Hematite Particles in a “Nanomedusa” Morphology

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Jin Bae Lee ◽  
Hae Jin Kim ◽  
Janez Lužnik ◽  
Andreja Jelen ◽  
Damir Pajić ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Room Temperature ◽  
Magnetic Phase ◽  
Hydrothermal Process ◽  
Ferromagnetic State ◽  
X Ray Diffraction ◽  
Morin Transition ◽  
Preferential Direction ◽  
X Ray ◽  
Transmission Electron

We present the synthesis, characterization, and magnetic properties of hematite particles in a peculiar “nanomedusa” morphology. The particles were prepared from an iron-silica complex by a hydrothermal process in a solution consisting of ethyl acetate and ethanol. The particles’ morphology, structure, and chemical composition were investigated by transmission electron microscopy, powder X-ray diffraction, and scanning electron microscope equipped with an energy-dispersive X-ray spectrometer. The “hairy” particles consist of a spherical-like core of about 100 nm diameter and fibrous exterior composed of thin “legs” of 5 nm diameter grown along one preferential direction. The particles’ cores are crystalline and undergo a magnetic phase transition to a weakly ferromagnetic state at a temperature of 930 K that matches reasonably the Néel temperature of bulk hematite. However, unlike bulk hematite that undergoes Morin transition to an antiferromagnetic state around room temperature and small hematite nanoparticles that are superparamagnetic, the “nanomedusa” particles remain weakly ferromagnetic down to the lowest investigated temperature of 2 K. Each particle thus represents a nanodimensional “hairy” ferromagnet in a very broad temperature interval, extending much above the room temperature. Such high-temperature ferromagnetic nanoparticles are not frequently found among the nanomaterials.

AEM analysis of crystallization in Ti-based amorphous alloys

1983 ◽  
Vol 41 ◽  
pp. 270-271
Author(s):  
A.R. Pelton ◽  
A.F. Marshall ◽  
Y.S. Lee
Keyword(s):  
Magnetic Properties ◽  
Amorphous Alloys ◽  
Amorphous Materials ◽  
Isothermal Annealing ◽  
Amorphous Matrix ◽  
Nucleation And Growth ◽  
Current Interest ◽  
Amorphous Films ◽  
Electrical And Magnetic Properties

Amorphous materials are of current interest due to their desirable mechanical, electrical and magnetic properties. Furthermore, crystallizing amorphous alloys provides an avenue for discerning sequential and competitive phases thus allowing access to otherwise inaccessible crystalline structures. Previous studies have shown the benefits of using AEM to determine crystal structures and compositions of partially crystallized alloys. The present paper will discuss the AEM characterization of crystallized Cu-Ti and Ni-Ti amorphous films.Cu60Ti40: The amorphous alloy Cu60Ti40, when continuously heated, forms a simple intermediate, macrocrystalline phase which then transforms to the ordered, equilibrium Cu3Ti2 phase. However, contrary to what one would expect from kinetic considerations, isothermal annealing below the isochronal crystallization temperature results in direct nucleation and growth of Cu3Ti2 from the amorphous matrix.

Sign in / Sign up

Export Citation Format

Share Document