scholarly journals Waste Rubber Recycling: A Review on the Evolution and Properties of Thermoplastic Elastomers

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 782 ◽  
Author(s):  
Ali Fazli ◽  
Denis Rodrigue
Keyword(s):  
Mechanical Performance ◽  
Construction Material ◽  
Polymeric Materials ◽  
Thermoplastic Elastomers ◽  
Waste Materials ◽  
Polymer Waste ◽  
Waste Rubber ◽  
Wide Range ◽  
Rubber Recycling ◽  
Thermoplastic Resins

Currently, plastics and rubbers are broadly being used to produce a wide range of products for several applications like automotive, building and construction, material handling, packaging, toys, etc. However, their waste (materials after their end of life) do not degrade and remain for a long period of time in the environment. The increase of polymeric waste materials’ generation (plastics and rubbers) in the world led to the need to develop suitable methods to reuse these waste materials and decrease their negative effects by simple disposal into the environment. Combustion and landfilling as traditional methods of polymer waste elimination have several disadvantages such as the formation of dust, fumes, and toxic gases in the air, as well as pollution of underground water resources. From the point of energy consumption and environmental issues, polymer recycling is the most efficient way to manage these waste materials. In the case of rubber recycling, the waste rubber can go through size reduction, and the resulting powders can be melt blended with thermoplastic resins to produce thermoplastic elastomer (TPE) compounds. TPE are multi-functional polymeric materials combining the processability of thermoplastics and the elasticity of rubbers. However, these materials show poor mechanical performance as a result of the incompatibility and immiscibility of most polymer blends. Therefore, the main problem associated with TPE production from recycled materials via melt blending is the low affinity and interaction between the thermoplastic matrix and the crosslinked rubber. This leads to phase separation and weak adhesion between both phases. In this review, the latest developments related to recycled rubbers in TPE are presented, as well as the different compatibilisation methods used to improve the adhesion between waste rubbers and thermoplastic resins. Finally, a conclusion on the current situation is provided with openings for future works.

The Noell Conversion Process – a gasification process for the pollutant-free disposal of sewage sludge and the recovery of energy and materials

2000 ◽  
Vol 41 (8) ◽  
pp. 37-44 ◽  
Author(s):  
M. Jaeger ◽  
M. Mayer
Keyword(s):  
Sewage Sludge ◽  
Thermal Treatment ◽  
Construction Material ◽  
Advanced Technology ◽  
Conversion Process ◽  
Waste Materials ◽  
Gasification Process ◽  
Free Disposal ◽  
Dioxins And Furans ◽  
Wide Range

The Noell Conversion Process was developed to guarantee the safe disposal of sewage sludge and other waste materials by means of thermal treatment, evenwith very strict emission standards. The center piece of this process is a pressurized entrained flow gasifier. The reactin conditions in this gasifier does not only suppresses the formation of dioxins and furans, but also completely destroys any dioxins and furans contained in the waste materials. Another advantage of the Noell Conversion Process referring the thermal treatment of sewage sludge is the recovery of marketable substances such as synthesis gas, sulphur and vitrified slag. To demonstrate this advanced technology in the field of sewage sludge treatment, Noell-KRC has built a pilot plant in Freiberg/Germany. This plant was designed for a throughput of 0.5 Mg/h (dry base) of sewage sludge. During the operation of the plant from 1996 until 1998, it was possible to demonstrate that there are no problems with emissions of heavy metals like Mercury or organic components like Dioxins and Furans. The H2 rich gas produced in the process can be utilized as a power source. The vitrified slag produced in the process is of a quality suitable for use as a construction material with a wide range of applications.

Insulation Materials for Wire and Cable Applications

2002 ◽  
Vol 75 (4) ◽  
pp. 701-712 ◽  
Author(s):  
J. L. Mead ◽  
Z. Tao ◽  
H. S. Liu
Keyword(s):  
Material Selection ◽  
Polymeric Materials ◽  
Dielectric Strength ◽  
Thermoplastic Elastomers ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Flame Resistance ◽  
Wide Range ◽  
Materials Used ◽  
Styrene Butadiene

Abstract A wide range of polymers has been used for wire and cable insulation. Older materials include natural, butyl, and styrene-butadiene rubber. Newer materials include crosslinked polyethylene, silicone rubber, ethylene-propylene elastomers, and thermoplastic elastomers. Properties of importance to electrical insulation ability include dielectric constant, resistivity, dielectric loss, and dielectric strength. Flame resistance is also important in certain applications. This paper reviews the different polymeric materials used in cable constructions and the important electrical properties for material selection.

scholarly journals Effects of a Twin-Screw Extruder Equipped with a Molten Resin Reservoir on the Mechanical Properties and Microstructure of Recycled Waste Plastic Polyethylene Pellet Moldings

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1058
Author(s):  
Hikaru Okubo ◽  
Haruka Kaneyasu ◽  
Tetsuya Kimura ◽  
Patchiya Phanthong ◽  
Shigeru Yao
Keyword(s):  
Mechanical Properties ◽  
Mechanical Performance ◽  
Value Added ◽  
Industrial Applications ◽  
Twin Screw Extruder ◽  
Screw Extruder ◽  
Polymer Properties ◽  
Wide Range ◽  
Twin Screw ◽  
Recycled Plastics

Each year, increasing amounts of plastic waste are generated, causing environmental pollution and resource loss. Recycling is a solution, but recycled plastics often have inferior mechanical properties to virgin plastics. However, studies have shown that holding polymers in the melt state before extrusion can restore the mechanical properties; thus, we propose a twin-screw extruder with a molten resin reservoir (MSR), a cavity between the screw zone and twin-screw extruder discharge, which retains molten polymer after mixing in the twin-screw zone, thus influencing the polymer properties. Re-extruded recycled polyethylene (RPE) pellets were produced, and the tensile properties and microstructure of virgin polyethylene (PE), unextruded RPE, and re-extruded RPE moldings prepared with and without the MSR were evaluated. Crucially, the elongation at break of the MSR-extruded RPE molding was seven times higher than that of the original RPE molding, and the Young’s modulus of the MSR-extruded RPE molding was comparable to that of the virgin PE molding. Both the MSR-extruded RPE and virgin PE moldings contained similar striped lamellae. Thus, MSR re-extrusion improved the mechanical performance of recycled polymers by optimizing the microstructure. The use of MSRs will facilitate the reuse of waste plastics as value-added materials having a wide range of industrial applications.

scholarly journals Review of the relationship between aggregates geology and Los Angeles and micro-Deval tests

2021 ◽  
Vol 80 (3) ◽  
pp. 1963-1980
Author(s):  
Solomon Adomako ◽  
Christian John Engelsen ◽  
Rein Terje Thorstensen ◽  
Diego Maria Barbieri
Keyword(s):  
Los Angeles ◽  
Crystal Size ◽  
Grain Shape ◽  
Mechanical Performance ◽  
Pore Space ◽  
Construction Material ◽  
Engineering Properties ◽  
Coarse Grained ◽  
The Impact ◽  
The Relationship

AbstractRock aggregates constitute the enormous volume of inert construction material used around the globe. The petrologic description as igneous, sedimentary, and metamorphic types establishes the intrinsic formation pattern of the parent rock. The engineering properties of these rocks vary due to the differences in the transformation process (e.g. hydrothermal deposits) and weathering effect. The two most common mechanical tests used to investigate the performance of aggregates are the Los Angeles (LA) and micro-Deval (MD) tests. This study reviewed the geological parameters (including mineralogy, grain and crystal size, grain shape, and porosity) and the relationship to Los Angeles and micro-Deval tests. It was found that high content of primary minerals in rocks (e.g. quartz and feldspar) is a significant parameter for performance evaluation. Traces of secondary and accessory minerals also affect the performance of rocks, although in many cases it is based on the percentage. Furthermore, some studies showed that the effect of mineralogic composition on mechanical strength is not sufficient to draw final conclusions of mechanical performance; therefore, the impact of other textural characteristics should be considered. The disposition of grain size and crystal size (e.g. as result of lithification) showed that rocks composed of fine-grain textural composition of ≤ 1 mm enhanced fragmentation and wear resistance than medium and coarse grained (≥ 1 mm). The effect of grain shape was based on convex and concave shapes and flat and elongated apexes of tested samples. The equidimensional form descriptor of rocks somehow improved resistance to impact from LA than highly flat and elongated particles. Lastly, the distribution of pore space investigated by means of the saturation method mostly showed moderate (R = 0.50) to strong (R = 0.90) and positive correlations to LA and MD tests.

scholarly journals Crushed Bricks: Demolition Waste as a Sustainable Raw Material for Geopolymers

2021 ◽  
Vol 13 (14) ◽  
pp. 7572
Author(s):  
Gigliola D’Angelo ◽  
Marina Fumo ◽  
Mercedes del Rio Merino ◽  
Ilaria Capasso ◽  
Assunta Campanile ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Building Materials ◽  
Mechanical Performance ◽  
Raw Materials ◽  
Construction Material ◽  
Raw Material ◽  
The European Union ◽  
Total Energy Consumption ◽  
Demolition Waste ◽  
Crushed Brick

Demolition activity plays an important role in the total energy consumption of the construction industry in the European Union. The indiscriminate use of non-renewable raw materials, energy consumption, and unsustainable design has led to a redefinition of the criteria to ensure environmental protection. This article introduces an experimental plan that determines the viability of a new type of construction material, obtained from crushed brick waste, to be introduced into the construction market. The potential of crushed brick waste as a raw material in the production of building precast products, obtained by curing a geopolymeric blend at 60 °C for 3 days, has been exploited. Geopolymers represent an important alternative in reducing emissions and energy consumption, whilst, at the same time, achieving a considerable mechanical performance. The results obtained from this study show that the geopolymers produced from crushed brick were characterized by good properties in terms of open porosity, water absorption, mechanical strength, and surface resistance values when compared to building materials produced using traditional technologies.

scholarly journals Modelling the elastic mechanical properties of bioactive glass-derived scaffolds

2020 ◽  
Vol 6 (1) ◽  
pp. 50-56
Author(s):  
Francesco Baino ◽  
Elisa Fiume
Keyword(s):  
Elastic Properties ◽  
Poisson’S Ratio ◽  
Mechanical Performance ◽  
Solid Material ◽  
Poisson's Ratio ◽  
Predictive Capability ◽  
Shear Moduli ◽  
Wide Range ◽  
Constitutive Parameters ◽  
The Relationship

AbstractPorosity is known to play a pivotal role in dictating the functional properties of biomedical scaffolds, with special reference to mechanical performance. While compressive strength is relatively easy to be experimentally assessed even for brittle ceramic and glass foams, elastic properties are much more difficult to be reliably estimated. Therefore, describing and, hence, predicting the relationship between porosity and elastic properties based only on the constitutive parameters of the solid material is still a challenge. In this work, we quantitatively compare the predictive capability of a set of different models in describing, over a wide range of porosity, the elastic modulus (7 models), shear modulus (3 models) and Poisson’s ratio (7 models) of bioactive silicate glass-derived scaffolds produced by foam replication. For these types of biomedical materials, the porosity dependence of elastic and shear moduli follows a second-order power-law approximation, whereas the relationship between porosity and Poisson’s ratio is well fitted by a linear equation.

scholarly journals Recent Advances in Fabrication of Non-Isocyanate Polyurethane-Based Composite Materials

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3497
Author(s):  
Piotr Stachak ◽  
Izabela Łukaszewska ◽  
Edyta Hebda ◽  
Krzysztof Pielichowski
Keyword(s):  
Raw Materials ◽  
Synthesis Method ◽  
Polymeric Materials ◽  
Original Research ◽  
Significant Group ◽  
Oh Groups ◽  
New Class ◽  
Hazardous Chemical ◽  
Wide Range

Polyurethanes (PUs) are a significant group of polymeric materials that, due to their outstanding mechanical, chemical, and physical properties, are used in a wide range of applications. Conventionally, PUs are obtained in polyaddition reactions between diisocyanates and polyols. Due to the toxicity of isocyanate raw materials and their synthesis method utilizing phosgene, new cleaner synthetic routes for polyurethanes without using isocyanates have attracted increasing attention in recent years. Among different attempts to replace the conventional process, polyaddition of cyclic carbonates (CCs) and polyfunctional amines seems to be the most promising way to obtain non-isocyanate polyurethanes (NIPUs) or, more precisely, polyhydroxyurethanes (PHUs), while primary and secondary –OH groups are being formed alongside urethane linkages. Such an approach eliminates hazardous chemical compounds from the synthesis and leads to the fabrication of polymeric materials with unique and tunable properties. The main advantages include better chemical, mechanical, and thermal resistance, and the process itself is invulnerable to moisture, which is an essential technological feature. NIPUs can be modified via copolymerization or used as matrices to fabricate polymer composites with different additives, similar to their conventional counterparts. Hence, non-isocyanate polyurethanes are a new class of environmentally friendly polymeric materials. Many papers on the matter above have been published, including both original research and extensive reviews. However, they do not provide collected information on NIPU composites fabrication and processing. Hence, this review describes the latest progress in non-isocyanate polyurethane synthesis, modification, and finally processing. While focusing primarily on the carbonate/amine route, methods of obtaining NIPU are described, and their properties are presented. Ways of incorporating various compounds into NIPU matrices are characterized by the role of PHU materials in copolymeric materials or as an additive. Finally, diverse processing methods of non-isocyanate polyurethanes are presented, including electrospinning or 3D printing.

scholarly journals Nanocomposites Materials of PLA Reinforced with Nanoclays Using a Masterbatch Technology: A Study of the Mechanical Performance and Its Sustainability

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2133
Author(s):  
Helena Oliver-Ortega ◽  
Josep Tresserras ◽  
Fernando Julian ◽  
Manel Alcalà ◽  
Alba Bala ◽  
...  
Keyword(s):  
Food Packaging ◽  
Mechanical Performance ◽  
Polymeric Materials ◽  
Barrier Properties ◽  
Food Tray ◽  
Environmental Concerns ◽  
Poly Lactic Acid ◽  
The Matrix ◽  
Surface Modified ◽  
Being Moved

Packaging consumes around 40% of the total plastic production. One of the most important fields with high requirements is food packaging. Food packaging products have been commonly produced with petrol polymers, but due to environmental concerns, the market is being moved to biopolymers. Poly (lactic acid) (PLA) is the most promising biopolymer, as it is bio-based and biodegradable, and it is well established in the market. Nonetheless, its barrier properties need to be enhanced to be competitive with other polymers such as polyethylene terephthalate (PET). Nanoclays improve the barrier properties of polymeric materials if correct dispersion and exfoliation are obtained. Thus, it marks a milestone to obtain an appropriate dispersion. A predispersed methodology is proposed as a compounding process to improve the dispersion of these composites instead of common melt procedures. Afterwards, the effect of the polarity of the matrix was analyzing using polar and surface modified nanoclays with contents ranging from 2 to 8% w/w. The results showed the suitability of the predispersed and concentrated compound, technically named masterbatch, to obtain intercalated structures and the higher dispersion of polar nanoclays. Finally, the mechanical performance and sustainability of the prepared materials were simulated in a food tray, showing the best assessment of these materials and their lower fingerprint.

scholarly journals High strength and conductive hydrogel with fully interpenetrated structure from alginate and acrylamide

e-Polymers ◽  
2021 ◽  
Vol 21 (1) ◽  
pp. 391-397
Author(s):  
Tao Liu ◽  
Ripeng Zhang ◽  
Jianzhi Liu ◽  
Ling Zhao ◽  
Yueqin Yu
Keyword(s):  
Mechanical Performance ◽  
Three Dimensional ◽  
High Strength ◽  
Extreme Environment ◽  
Natural Polymers ◽  
Conductive Hydrogel ◽  
Wide Range ◽  
Interpenetrated Structure ◽  
Conductive Hydrogels ◽  
Conductive Properties

Abstract Highly stretched and conductive hydrogels, especially synthetized from natural polymers, are beneficial for highly stretched electronic equipment which is applied in extreme environment. We designed and prepared robust and tough alginate hydrogels (GMA-SA-PAM) using the ingenious strategy of fully interpenetrating cross-linking, in which the glycidyl methacrylate (GMA) was used to modify sodium alginate (SA) and then copolymerized with acrylamide (AM) and methylenebisacrylamide (BIS) as cross-linkers. The complete cross-linked structures can averagely dissipate energy and the polymer structures can maintain hydrogels that are three-dimensional to greatly improve the mechanical performance of hydrogels. The GMA-SA-PAM hydrogels display ultra-stretchable (strain up to ∼407% of tensile strain) and highly compressible (∼57% of compression strain) properties. In addition, soaking the GMA-SA-PAM hydrogel in 5 wt% NaCl solution also endows the conductivity of the hydrogel (this hydrogel was named as GSP-Na) with excellent conductive properties (5.26 S m−1). The GSP-Na hydrogel with high stability, durability, as well as wide range extent sensor is also demonstrated by researching the electrochemical signals and showing the potential for applications in wearable and quickly responded electronics.

Evaluation Indexes System for Assessing Road Construction with Recycled Waste Materials to Achieve Better Environmental Impacts

2011 ◽  
Vol 250-253 ◽  
pp. 1001-1006 ◽  
Author(s):  
De Zhen Chen ◽  
Cui Jie Geng ◽  
Wen Zhou Sun
Keyword(s):  
Energy Consumption ◽  
Environmental Impact ◽  
Waste Disposal ◽  
Large Scale ◽  
Construction Material ◽  
Bottom Ash ◽  
Road Construction ◽  
Waste Materials ◽  
Evaluation Indexes ◽  
Recycled Waste

Evaluation indexes system has been put forward in this paper for quantifying thesystematical energy consumption, resources consumption, total emissions’ change and waste disposal capacity in road construction with recycled waste materials involved. With help of this evaluation indexes system, the contributions to environmental improvement caused by recycling waste materials in road construction can be quantified through calculating savings on environmental impact potentials, savings on energy consumption, on virgin materials’ consumption and waste disposal capacity provided by road construction. Based on the construction project of a road section numbered No.20 EWK0+400 ~ EWK0+600 of North highway to Shanghai Pudong international airport, which was the first trial project of using several kinds of recycled waste materials including bottom ash from incinerators to replace commonly used materials such as gravel in large scale in road pavement, the results of the four indexes, namely, savings on energy consumption and virgin materials’ consumption, environmental impact potentials as well as waste disposal capacity were obtained. It was found out that with multi recycled waste materials replacing part of the common construction material, systematical energy consumption can be reduced by 30%, a large amount of virgin resource consumption can be avoid and road construction also provides a remarkable large “dumping site” for solid wastes; while at the same time environmental impact potentials were saved for most impact categories except for increase in Ecotoxicity, water chronic, which was caused by heavy metals’ leaching and can be prevented by pre-treatment. Those results are useful for guiding the utilization of recycled waste materials, as well as for developing new technology process and advanced materials in road construction.

Sign in / Sign up

Export Citation Format

Share Document