scholarly journals Preparation and Characterization of Ethylenediamine-Polyurea Microcapsule Epoxy Self-Healing Coating

Materials ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 326 ◽  
Author(s):  
Yanxuan Ma ◽  
Yingrui Zhang ◽  
Jiatong Liu ◽  
Yi Sun ◽  
Yajie Ge ◽  
...  
Keyword(s):  
Electrochemical Impedance ◽  
Spherical Shape ◽  
Core Material ◽  
Self Healing ◽  
Characterization Methods ◽  
Chemical Structures ◽  
Size And Morphology ◽  
Eis Measurements ◽  
External Corrosion ◽  
The Fourier Transform

Polyurea microcapsules with Ethylenediamine (EDA) as the core material were synthesized. A set of characterization methods, including optical and scanning electron microscopy (OM and SEM), the Fourier transform infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA) were used to confirm the microcapsule morphology and chemical structures. The influence of emulsifier content and stirring rate on size and morphology of the microcapsules was investigated, and the self-healing performance of EDA-Polyurea microcapsule/epoxy coatings was evaluated by electrochemical impedance spectroscopy (EIS) measurements. The results showed that the microcapsules obtained had good spherical shape with a mean diameter of 0.54–0.70 μm. Compared with pure core material, the microcapsule showed excellent thermostability, and the content of core materials was up to 56.00 wt%. The epoxy coating with 5.0 wt% EDA-Polyurea microcapsules achieved average corrosion resistance efficiencies of 90.00%, significantly enhancing the capability of the scratched coating to resist external corrosion.

scholarly journals Performance of corrosion protection of carbon steel with cerium modified phosphate–permanganate coatings and a layer of silane doped with cerium

Chemija ◽  
2019 ◽  
Vol 30 (3) ◽  
Author(s):  
O. Girčienė ◽  
L. Gudavičiūtė ◽  
A. Martušienė ◽  
V. Jasulaitienė ◽  
A. Selskienė ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Photoelectron Spectroscopy ◽  
Electrochemical Impedance ◽  
Corrosion Behaviour ◽  
Low Frequency ◽  
Cerium Nitrate ◽  
Self Healing ◽  
Nacl Solution ◽  
Composition And Structure ◽  
Eis Measurements

This work was aimed to evaluate the effect of bis-[triethoxysilylpropyl] tetrasulfide (BTESPT) doped with cerium nitrate, as a corrosion inhibitor, on improved corrosion resistance of samples of carbon steel with a phosphate–permanganate layer in a 0.5 M NaCl solution. The main goal of the present work was to compare self-healing capacities of cerium conversion coatings and cerium as an additive inhibitor to silane. The composition and structure of the investigated samples were characterized by scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS) techniques, while the corrosion behaviour was investigated applying voltametric and electrochemical impedance spectroscopy (EIS) measurements. The results of EIS measurements performed during 24 h immersion of the investigated samples into the 0.5 M NaCl solution revealed that the layer of silane doped with Ce was more protective than that of the non-modified one. It has been determined that the presence of cerium nitrate in the silane coating can lead to high values of low frequency impedance due to the healing of the defect.

scholarly journals Self-healing performance of smart coatings modified with different corrosion inhibitors

2020 ◽  
Author(s):  
Sehrish Habib ◽  
Eman Fayyed ◽  
Muddasir Nawaz ◽  
Adnan Khan ◽  
Abdul Shakoor ◽  
...  
Keyword(s):  
Corrosion Inhibition ◽  
Corrosion Inhibitors ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Protective Layer ◽  
Sem Analysis ◽  
Self Healing ◽  
Defect Site ◽  
Corrosion Inhibition Efficiency ◽  
Eis Measurements

Corrosion results in considerable materials and equipment failure. According to one survey, about 1/4 to 1/3 of the total interruption in industries is due to detrimental effects of corrosion. It is, therefore, important to prevent corrosion to guarantee the reliability of the assets. The present work is aimed to explore the purpose of CeO2 as a carrier for corrosion inhibitors and its capability to release inhibitors, to achieve decent corrosion protection efficiency in epoxy-based polymeric nanocomposite coatings. Amine-based corrosion inhibitors (N-methylthiourea NMTU and Dodecylamine DDA) were used for CeO2 nano container modification, and corrosion inhibition efficiency has been explored utilizing electrochemical impedance spectroscopy (EIS) in 3.5 wt% NaCl solution. Loading of inhibitor into nanocontainer has been confirmed through Fouriertransform infrared spectroscopy (FTIR) and Brunauer-Emmett-Teller (BET). It was observed that 25% and 29.75% w/w of NMTU and DDA were loaded into nanocontainers, confirmed through Thermogravimetric analysis (TGA). Scanning electron microscopy (SEM) analysis endorsed the formation of a protective layer on a scratch area to protect steel from the external environment. This protective layer played a very important role in protecting steel from progressing corrosion on the defect site from the aggressiveness of the solution. EIS measurements revealed the decent corrosion inhibition efficiency of these inhibitors in order of DDA>NMTU. As a result, they are a favorable solution for longer endurance of coated piping steel and decreased operation expense contributing to economic savings, materials reliability and safety.

scholarly journals Ecofriendly Synthesis of Silver Nanoparticles by Terrabacter humi sp. nov. and Their Antibacterial Application against Antibiotic-Resistant Pathogens

2020 ◽  
Vol 21 (24) ◽  
pp. 9746
Author(s):  
Shahina Akter ◽  
Sun-Young Lee ◽  
Muhammad Zubair Siddiqi ◽  
Sri Renukadevi Balusamy ◽  
Md. Ashrafudoulla ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Spherical Shape ◽  
Optimal Growth ◽  
Rrna Genes ◽  
Rrna Gene ◽  
Strictly Aerobic ◽  
Drug Resistant ◽  
Protein Coding ◽  
A Genome ◽  
The Fourier Transform

It is essential to develop and discover alternative eco-friendly antibacterial agents due to the emergence of multi-drug-resistant microorganisms. In this study, we isolated and characterized a novel bacterium named Terrabacter humi MAHUQ-38T, utilized for the eco-friendly synthesis of silver nanoparticles (AgNPs) and the synthesized AgNPs were used to control multi-drug-resistant microorganisms. The novel strain was Gram stain positive, strictly aerobic, milky white colored, rod shaped and non-motile. The optimal growth temperature, pH and NaCl concentration were 30 °C, 6.5 and 0%, respectively. Based on 16S rRNA gene sequence, strain MAHUQ-38T belongs to the genus Terrabacter and is most closely related to several Terrabacter type strains (98.2%–98.8%). Terrabacter humi MAHUQ-38T had a genome of 5,156,829 bp long (19 contigs) with 4555 protein-coding genes, 48 tRNA and 5 rRNA genes. The culture supernatant of strain MAHUQ-38T was used for the eco-friendly and facile synthesis of AgNPs. The transmission electron microscopy (TEM) image showed the spherical shape of AgNPs with a size of 6 to 24 nm, and the Fourier transform infrared (FTIR) analysis revealed the functional groups responsible for the synthesis of AgNPs. The synthesized AgNPs exhibited strong anti-bacterial activity against multi-drug-resistant pathogens, Escherichia coli and Pseudomonas aeruginosa. Minimal inhibitory/bactericidal concentrations against E. coli and P. aeruginosa were 6.25/50 and 12.5/50 μg/mL, respectively. The AgNPs altered the cell morphology and damaged the cell membrane of pathogens. This study encourages the use of Terrabacter humi for the ecofriendly synthesis of AgNPs to control multi-drug-resistant microorganisms.

scholarly journals Zn-Co-CeO2 vs. Zn-Co Coatings: Effect of CeO2 Sol in the Enhancement of the Corrosion Performance of Electrodeposited Composite Coatings

Metals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 704
Author(s):  
Marija Riđošić ◽  
Nebojša D. Nikolić ◽  
Asier Salicio-Paz ◽  
Eva García-Lecina ◽  
Ljiljana S. Živković ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Healing Rate ◽  
Electrochemical Impedance ◽  
Composite Coatings ◽  
Self Healing ◽  
Kelvin Probe ◽  
Artificial Defect ◽  
Volta Potential ◽  
Superior Corrosion Resistance ◽  
The Stability

Electrodeposition and characterization of novel ceria-doped Zn-Co composite coatings was the main goal of this research. Electrodeposited composite coatings were compared to pure Zn-Co coatings obtained under the same conditions. The effect of two ceria sources, powder and home-made sol, on the morphology and corrosion resistance of the composite coatings was determined. During the electrodeposition process the plating solution was successfully agitated in an ultrasound bath. The source of the particles was found to influence the stability and dispersity of plating solutions. The application of ceria sol resulted in an increase of the ceria content in the resulting coating and favored the refinement from cauliflower-like morphology (Zn-Co) to uniform and compact coral-like structure (Zn-Co-CeO2 sol). The corrosion resistance of the composite coatings was enhanced compared to bare Zn-Co as evidenced by electrochemical impedance spectroscopy and scanning Kelvin probe results. Zn-Co doped with ceria particles originating from ceria sol exhibited superior corrosion resistance compared to Zn-Co-CeO2 (powder) coatings. The self-healing rate of artificial defect was calculated based on measured Volta potential difference for which Zn-Co-CeO2 (sol) coatings exhibited a self-healing rate of 73.28% in a chloride-rich environment.

scholarly journals Oxidation Behavior of an Austenitic Steel (Fe, Cr and Ni), the 310 H, in a Deaerated Supercritical Water Static System

Metals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 571
Author(s):  
Aurelia Elena Tudose ◽  
Ioana Demetrescu ◽  
Florentina Golgovici ◽  
Manuela Fulger
Keyword(s):  
Stainless Steel ◽  
Supercritical Water ◽  
Nuclear Reactor ◽  
Electrochemical Impedance ◽  
Electrochemical Methods ◽  
Metallographic Analysis ◽  
Gravimetric Analysis ◽  
Static System ◽  
Eis Measurements ◽  
Supercritical Temperature

The aim of this work was to study the corrosion behavior of a Fe-Cr-Ni alloy (310 H stainless steel) in water at a supercritical temperature of 550 °C and a pressure of 250 atm for up to 2160 h. At supercritical temperature, water is a highly aggressive environment, and the corrosion of structural materials used in a supercritical water-cooled nuclear reactor (SCWR) is a critical problem. Selecting proper candidate materials is one key issue for the development of SCWRs. After exposure to deaerated supercritical water, the oxides formed on the 310 H SS surface were characterized using a gravimetric analysis, a metallographic analysis, and electrochemical methods. Gravimetric analysis showed that, due to oxidation, all the tested samples gained weight, and oxidation of 310H stainless steel at 550 °C follows parabolic rate, indicating that it is driven by a diffusion process. The data obtained by microscopic metallography concord with those obtained by gravimetric analysis and show that the oxides layer has a growing tendency in time. At the same time, the results obtained by electrochemical impedance spectroscopy (EIS) measurements indicate the best corrosion resistance of Cr, and (Fe, Mn) Cr2O4 oxides developed on the samples surface after 2160 h of oxidation. Based on the results obtained, a strong correlation between gravimetric analysis, metallographic analysis, and electrochemical methods was found.

scholarly journals Experimental, DFT and MD Assessments of Bark Extract of Tamarix aphylla as Corrosion Inhibitor for Carbon Steel Used in Desalination Plants

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3679
Author(s):  
Ismat H. Ali
Keyword(s):  
Corrosion Inhibitor ◽  
Potentiodynamic Polarization ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Effect Of Temperature ◽  
Bark Extract ◽  
Plant Sample ◽  
Gravimetric Analysis ◽  
Sample Collection ◽  
Eis Measurements

This study aimed to examine the extract of barks of Tamarix aphylla as a corrosion inhibitor. The methodology briefly includes plant sample collection, extraction of the corrosion inhibitor, gravimetric analysis, plotting potentiodynamic polarization plots, electrochemical impedance spectroscopic measurements, optimization of conditions, and preparation of the inhibitor products. The results show that the values of inhibition efficiency (IE%) increased as the concentrations of the inhibitor increased, with a maximum achievable inhibition efficiency of 85.0%. Potentiodynamic polarization (PP) tests revealed that the extract acts as a dual-type inhibitor. The results obtained from electrochemical impedance spectroscopy (EIS) measurements indicate an increase in polarisation resistance, confirming the inhibitive capacity of the tested inhibitor. The adsorption of the inhibitor on the steel surface follows the Langmuir adsorption isotherm model and involves competitive physio-sorption and chemisorption mechanisms. The EIS technique was utilized to investigate the effect of temperature on corrosion inhibition within the 298–328 K temperature range. Results confirm that the inhibition efficiency (IE%) of the inhibitor decreased slightly as the temperature increased. Lastly, the thermodynamic parameters for the inhibitor were calculated.

scholarly journals Polar poly(n-butyl acrylate)-g-polyacrylonitrile elastomer with high temperature elasticity and healability as flexible electronic substrate

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Yuzhu Zheng ◽  
Deli Xu ◽  
Shiyou Tian ◽  
Manli Li ◽  
Wenwen Wang ◽  
...  
Keyword(s):  
High Temperature ◽  
Graft Copolymer ◽  
Butyl Acrylate ◽  
Uniaxial Tensile ◽  
Uniaxial Tensile Test ◽  
Self Healing ◽  
Chemical Structures ◽  
Flexible Electronic ◽  
Ag Nanowires ◽  
Cyano Groups

AbstractIn this work, graft copolymer poly (n-butyl acrylate)-g-polyacrylonitrile with poly (n-butyl acrylate) as backbones and polyacrylonitrile as side chains (PnBA-g-PAN) was synthesized by macromonomer method and emulsion polymerization. The macromonomer was synthesized by atom transfer radical polymerization and end-group modification. The chemical structures and thermal properties of macromonomer and graft copolymer were investigated by FTIR, GPC, NMR and TGA, etc. The mechanical properties of graft copolymer elastomer was also measured by uniaxial tensile test. Rheological properties at different temperature and mechanical property demonstrated that graft copolymer elastomer possessed elasticity until 180 oC because of cyclization of cyano groups. Ag nanowires@PnBA-g-PAN composite elastomer was developed, and the resulted material exhibited autonomic healing property on account of segments’ flexibility and dynamic interaction between Ag nanowires (AgNWs) and cyano groups. This is a general method for generation of elastomer with high temperature elasticity and fast self-healing. The composite elastomer has potential application in flexible electronic conductor.

scholarly journals Synthesis and Characterization of Partially Renewable Oleic Acid-Based Ionomers for Proton Exchange Membranes

Polymers ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 130
Author(s):  
Carlos Corona-García ◽  
Alejandro Onchi ◽  
Arlette A. Santiago ◽  
Araceli Martínez ◽  
Daniella Esperanza Pacheco-Catalán ◽  
...  
Keyword(s):  
Oleic Acid ◽  
Proton Conductivity ◽  
Electrochemical Impedance ◽  
Proton Exchange Membranes ◽  
Proton Exchange ◽  
Molar Ratio ◽  
Aromatic Diamines ◽  
Chemical Structures ◽  
Long Chain

The future availability of synthetic polymers is compromised due to the continuous depletion of fossil reserves; thus, the quest for sustainable and eco-friendly specialty polymers is of the utmost importance to ensure our lifestyle. In this regard, this study reports on the use of oleic acid as a renewable source to develop new ionomers intended for proton exchange membranes. Firstly, the cross-metathesis of oleic acid was conducted to yield a renewable and unsaturated long-chain aliphatic dicarboxylic acid, which was further subjected to polycondensation reactions with two aromatic diamines, 4,4′-(hexafluoroisopropylidene)bis(p-phenyleneoxy)dianiline and 4,4′-diamino-2,2′-stilbenedisulfonic acid, as comonomers for the synthesis of a series of partially renewable aromatic-aliphatic polyamides with an increasing degree of sulfonation (DS). The polymer chemical structures were confirmed by Fourier transform infrared (FTIR) and nuclear magnetic resonance (1H, 13C, and 19F NMR) spectroscopy, which revealed that the DS was effectively tailored by adjusting the feed molar ratio of the diamines. Next, we performed a study involving the ion exchange capacity, the water uptake, and the proton conductivity in membranes prepared from these partially renewable long-chain polyamides, along with a thorough characterization of the thermomechanical and physical properties. The highest value of the proton conductivity determined by electrochemical impedance spectroscopy (EIS) was found to be 1.55 mS cm−1 at 30 °C after activation of the polymer membrane.

Electrochemical Performance Optimization of Li2NixFe1−xSiO4 Cathode Materials for Lithium-Ion Batteries

2017 ◽  
Vol 14 (2) ◽  
Author(s):  
Atef Y. Shenouda ◽  
M. M. S. Sanad
Keyword(s):  
Performance Optimization ◽  
Electrochemical Impedance ◽  
Coulombic Efficiency ◽  
Sol Gel ◽  
Lithium Ion ◽  
Electrochemical Impedance Spectra ◽  
Cell Parameters ◽  
Sol Gel Process ◽  
Eis Measurements ◽  
And Function

Li2NixFe1−xSiO4 (x = 0, 0.2, 0.4, 0.6, 0.8, and 1) samples were prepared by sol–gel process. The crystal structure of prepared samples of Li2NixFe1−xSiO4 was characterized by XRD. The different crystallographic parameters such as crystallite size and lattice cell parameters have been calculated. Scanning electron microscope (SEM) and Fourier transform infrared spectroscopy (FTIR) investigations were carried out explaining the morphology and function groups of the synthesized samples. Furthermore, electrochemical impedance spectra (EIS) measurements are applied. The obtained results indicated that the highest conductivity is achieved for Li2Ni0.4Fe0.6SiO4 electrode compound. It was observed that Li/Li2Ni0.4Fe0.6SiO4 battery has initial discharge capacity of 164 mAh g−1 at 0.1 C rate. The cycle life performance of all Li2NixFe1−xSiO4 batteries was ranged between 100 and 156 mAh g−1 with coulombic efficiency range between 70.9% and 93.9%.

scholarly journals Preparation and Properties of Self-Healing and Self-Lubricating Epoxy Coatings with Polyurethane Microcapsules Containing Bifunctional Linseed Oil

Polymers ◽  
2019 ◽  
Vol 11 (10) ◽  
pp. 1578 ◽  
Author(s):  
Haijuan Yang ◽  
Qiufeng Mo ◽  
Weizhou Li ◽  
Fengmei Gu
Keyword(s):  
Interfacial Polymerization ◽  
Electrochemical Impedance ◽  
Linseed Oil ◽  
Salt Spray ◽  
Average Diameter ◽  
Organic Coating ◽  
Epoxy Coating ◽  
The Self ◽  
Self Healing ◽  
Pure Epoxy

An organic coating is commonly used to protect metal from corrosion, but it is prone to failure due to microcracks generated by internal stress and external mechanical action. The self-healing and self-lubricating achieved in the coating is novel, which allows an extension of life by providing resistance to damage and repair after damage. In this study, a new approach to microencapsulating bifunctional linseed oil with polyurethane shell by interfacial polymerization. Moreover, the self-healing and self-lubricating coatings with different concentrations of microcapsules were developed. The well-dispersed microcapsules showed a regular spherical morphology with an average diameter of ~64.9 μm and a core content of 74.0 wt.%. The results of the salt spray test demonstrated that coatings containing microcapsules still possess anticorrosion, which is improved with the increase of microcapsules content, after being scratched. The results of electrochemical impedance spectroscopy showed a |Z|f=0.01Hz value of 104 Ω·cm2 for pure epoxy coating after being immersed for 3 days, whereas the coating with 20 wt.% microcapsules was the highest, 1010 Ω·cm2. The results of friction wear showed that the tribological performance of the coating was enhanced greatly as microcapsule concentration reached 10 wt.% or more, which showed a 86.8% or more reduction in the friction coefficient compared to the pure epoxy coating. These results indicated that the coatings containing microcapsules exhibited excellent self-healing and self-lubricating properties, which are positively correlated with microcapsules content.

Sign in / Sign up

Export Citation Format

Share Document