scholarly journals Effect of Polymer Addition on Performance of Portland Cement Mortar Exposed to Sulphate Attack

Materials ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 71 ◽  
Author(s):  
Paweł Łukowski ◽  
Dominika Dębska
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Chemical Resistance ◽  
Cement Mortar ◽  
Cement Composites ◽  
Distilled Water ◽  
Sulphate Attack ◽  
Polymer Addition ◽  
Cement Mortars ◽  
Time Changes

Resistance to degradation contributes greatly to the durability of materials. The chemical resistance of polymer-cement composites is not yet fully recognized. The goal of the research presented in this paper was to assess the performance of polymer-cement mortars under sulphate aggression, as compared to unmodified cement mortar. Mortars with polymer-to-cement ratios from 0 to 0.20 were stored in either a 5% MgSO4 solution or distilled water for 42 months. During this time, changes in elongation, mass, and compressive strength were determined. The results of these investigations, together with the visual and microscopic observations, allowed us to conclude that polymer–cement composites demonstrated better resistance to the attack of sulphate ions than unmodified cement mortar, even when using Portland cement with enhanced sulphate resistance.

Effect of Zeolite on Early Strength of Portland Cement Mortars

2019 ◽  
Vol 798 ◽  
pp. 358-363
Author(s):  
Raphat Tanasalagul ◽  
Thammaros Pantongsuk ◽  
Thapanee Srichumpong ◽  
Jaroon Junsomboon ◽  
Wichit Prakaypan ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Cement Mortar ◽  
Testing Machine ◽  
Type I ◽  
X Ray Diffraction ◽  
Cement Mortars ◽  
Binder Ratio ◽  
Early Strength ◽  
Water To Binder Ratio

Portland cement consists essentially of compounds of lime mixed with silica and alumina whereas zeolite is a kind of minerals containing high content of reactive silica and alumina. Therefore, there is a probability to apply zeolite in cement mortar in order to develop mortar properties. The purpose of this research was to study and analyze the efficiency of zeolite addition on properties of cement mortar. X-ray diffraction (XRD), universal testing machine (UTM) and scanning electron microscope (SEM) were used to characterize for mortar specimens. Mechanical property test was compressive strength according to ASTM C109 and carried out on 5 x 5 x 5 cm3 cube specimens at 1, 7 and 28 curing days. In this research, cement mortars were prepared by mixing type I Portland cement, fly ash, sand and zeolite. Zeolite was varied as 0, 0.25, 0.50 and 0.75 wt.% to cement and w/b (water to binder ratio) was 0.48. The results presented that the compressive strength of mortar with small amount of zeolite was improved since 1day age obviously comparing to that of mortar without zeolite. It was confirmed that zeolite would help strengthening the cement mortars at early strength.

scholarly journals Influence of a Retarding Admixture on the Behavior of Mortars Made from Different Types of Cement

2018 ◽  
Vol 7 (4.20) ◽  
pp. 334
Author(s):  
Tumadhir Merawi Borhan ◽  
Munaf A. Al-Ramahee ◽  
Noor Al-Hassnawi ◽  
Zaid Ali AlZaidi
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Cement Mortar ◽  
Setting Time ◽  
Length Change ◽  
Setting Times ◽  
White Cement ◽  
Cement Mortars ◽  
Different Types ◽  
Positive Effect

The effect of retarding admixture on the fresh and hardened behaviour of different types of cement mortars and pastes when using a retarding admixture was investigated in this study. The types of cement used are; White cement (WhC), Ordinary Portland cement (OPC) and Sulphate Resistant Portland cement (SRC). Different cement mortar and paste mixes were cast, for this purpose, with and without the admixture. Initial and final setting times, compressive strength, length change, absorption and density for these mixes were examined at the curing ages of 3,7,28,45 days. The results showed that the addition of retarding admixture delayed the setting time significantly of WhC paste. The retarding admixture has a positive effect on the compressive strength of the mortar specimens for all types of cement used. regarding the length change test, the admixture was found to reduce the initial expansion for all types of cement at all ages. The results also showed an increase in the density and decrease in water absorption, especially at the later ages for all types of cement.  Among all cement types used, WhC was noticeably the most affected type by using the retarding admixture compared to other types of cement used.  

STUDIES ON THE ACTION OF SULPHATES ON PORTLAND CEMENT: II. STEAM-CURING OF PORTLAND CEMENT MORTAR AND CONCRETE AS A REMEDY FOR SULPHATE (ALKALI) ACTION

1929 ◽  
Vol 1 (4) ◽  
pp. 359-384 ◽  
Author(s):  
T. Thorvaldson ◽  
V. A. Vigfusson ◽  
D. Wolochow
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Portland Cement ◽  
Laboratory Study ◽  
Cement Mortar ◽  
Steam Curing ◽  
Cement Mortars ◽  
Sodium Magnesium ◽  
The Stability

A study was made of the effect of steam-curing at various temperatures between 50° and 200 °C. on the resistance of Portland cement mortars to the action of solutions of the sulphates of sodium, magnesium and calcium. The methods used consisted in comparing the expansion of steam-cured and untreated mortar specimens during exposure to the solutions, and in determining the changes in the tensile strength of the more resistant mortars after long periods of exposure.A laboratory study of steam-curing as a remedy for the action of sulphates ("alkali") on Portland cement mortars, was made by determining the effect on the stability of the mortar as indicated by changes in volume and in tensile strength on exposure to sulphate solutions at 21 °C. The effect of steam-curing on the tensile and compressive strength of mortars and concrete was also studied.

Incorporation of Iraqi Rocks in the Production of Eco-Friendly Cement Mortar

2020 ◽  
Vol 38 (10A) ◽  
pp. 1522-1530
Author(s):  
Rawnaq S. Mahdi ◽  
Aseel B. AL-Zubidi ◽  
Hassan N. Hashim
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Compressive Strength ◽  
Water Absorption ◽  
Structural Properties ◽  
Mechanical Milling ◽  
Cement Mortar ◽  
Cement Mortars

This work reports on the incorporation of Flint and Kaolin rocks powders in the cement mortar in an attempt to improve its mechanical properties and produce an eco-friendly mortar. Flint and Kaolin powders are prepared by dry mechanical milling. The two powders are added separately to the mortars substituting cement partially. The two powders are found to improve the mechanical properties of the mortars. Hardness and compressive strength are found to increase with the increase of powders constituents in the cement mortars. In addition, the two powders affect water absorption and thermal conductivity of the mortar specimens which are desirable for construction applications. Kaolin is found to have a greater effect on the mechanical properties, water absorption, and thermal conductivity of the mortars than Flint. This behavior is discussed and analyzed based on the compositional and structural properties of the rocks powders.

scholarly journals Assessment of the influence of fine aggregates on Portland cement mortar compressive strength

2021 ◽  
pp. 100182
Author(s):  
Alberto Muciño ◽  
Lauro Bucio ◽  
Eligio Orozco ◽  
Sofía Vargas ◽  
Nora A. Pérez
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Cement Mortar ◽  
Fine Aggregates

scholarly journals Properties of Calcium Sulfoaluminate Cement Mortar Modified by Hydroxyethyl Methyl Celluloses with Different Degrees of Substitution

Molecules ◽  
2021 ◽  
Vol 26 (8) ◽  
pp. 2136
Author(s):  
Shaokang Zhang ◽  
Ru Wang ◽  
Linglin Xu ◽  
Andreas Hecker ◽  
Horst-Michael Ludwig ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Bond Strength ◽  
Cement Mortar ◽  
Retention Rate ◽  
Methyl Cellulose ◽  
Tensile Bond Strength ◽  
Calcium Sulfoaluminate Cement ◽  
Calcium Sulfoaluminate ◽  
Cement Mortars

This paper studies the influence of hydroxyethyl methyl cellulose (HEMC) on the properties of calcium sulfoaluminate (CSA) cement mortar. In order to explore the applicability of different HEMCs in CSA cement mortars, HEMCs with higher and lower molar substitution (MS)/degree of substitution (DS) and polyacrylamide (PAAm) modification were used. At the same time, two kinds of CSA cements with different contents of ye’elimite were selected. Properties of cement mortar in fresh and hardened states were investigated, including the fluidity, consistency and water-retention rate of fresh mortar and the compressive strength, flexural strength, tensile bond strength and dry shrinkage rate of hardened mortar. The porosity and pore size distribution were also analyzed by mercury intrusion porosimetry (MIP). Results show that HEMCs improve the fresh state properties and tensile bond strength of both types of CSA cement mortars. However, the compressive strength of CSA cement mortars is greatly decreased by the addition of HEMCs, and the flexural strength is decreased slightly. The MIP measurement shows that HEMCs increase the amount of micron-level pores and the porosity. The HEMCs with different MS/DS have different effects on the improvement of tensile bond strength in different CSA cement mortars. PAAm modification can improve the tensile bond strength of HEMC-modified CSA cement mortar.

Preparation and Mechanical Properties of Polyethylene-Portland Cement Composites

2009 ◽  
Vol 1242 ◽  
Author(s):  
Rivas-Vázquez L.P. ◽  
Suárez-Orduña R. ◽  
Valera-Zaragoza M. ◽  
Máas-Díaz A. De la L. ◽  
Ramírez-Vargas E.
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Portland Cement ◽  
Plastic Waste ◽  
Cement Composites ◽  
Compression Tests ◽  
Standard Samples ◽  
Cement Ratio ◽  
Reinforcing Fibers ◽  
Waste Polyethylene

ABSTRACTThe effects of waste polyethylene aggregate as admixture agent in Portland cement at different addition polyethylene/cement ratios from 0.0156 to 0.3903 were investigated. The reinforced samples were prepared according the ASTM C 150 Standard (samples of 5 × 5 × 5 cm). The reinforcing fibers were milling at a size of 1/25 in diameter, form waste and used them to evaluate the effects in mechanical properties in cement-based composites. The evaluation of polyethylene as additive was based on results of density and compression tests. The 28-day compressive strength of cement reforced with plastic waste at a replacement polyethylene/cement ratio of 0.0468 was 23.5 MPa compared to the control concrete (7.5 MPa). The density of cement replaced with polyethylene varies from 2.114 (0% polyethylene) to 1.83 g/cm3 by the influence of polyethylene.

Estimation of Portland cement mortar compressive strength using microcores. Influence of shape and size

2014 ◽  
Vol 55 ◽  
pp. 359-364 ◽  
Author(s):  
F.J. Alejandre ◽  
V. Flores-Alés ◽  
R. Villegas ◽  
J. García-Heras ◽  
E. Morón
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Cement Mortar ◽  
Shape And Size

Influence of Mix Fly and Bottom Ashes from Biomass on Selected Properties of Cement Mortars

2019 ◽  
Vol 828 ◽  
pp. 14-17
Author(s):  
Malgorzata Ulewicz ◽  
Jakub Jura
Keyword(s):  
Electron Microscopy ◽  
Compressive Strength ◽  
Industrial Waste ◽  
Cement Mortar ◽  
Raw Materials ◽  
Bottom Ash ◽  
Waste Materials ◽  
X Ray ◽  
Cement Mortars ◽  
Fluorescence Spectrometer

The preliminary results of utilization of fly and bottom ash from combustion of biomass for the produce of cement mortars has been presented. Currently, this waste are deposited in industrial waste landfills. The chemical composition of waste materials was determined using X-ray fluorescence (spectrometer ARL Advant 'XP). ). In the studies sand was replaced by mix of fly and bottom ash from the combustion of biomass in an amount of 10-30% by weight of cement CEM I 42.5 R (Cemex). The obtained cement mortar concrete were subjected to microscopic examination (LEO Electron Microscopy Ltd.) and their compressive strength (PN-EN-196-1), frost resistance (PN-EN 1015-11 and PN-B -04500 ) and absorbability (PN-85/B-04500) were identified. The obtained results showed, the replacement of the cement by mix ashes from combustion of biomass reduce consumption of raw materials and will have a good influence on the environment.

Sign in / Sign up

Export Citation Format

Share Document