scholarly journals Performance of Fly Ash Geopolymer Concrete Incorporating Bamboo Ash at Elevated Temperature

Materials ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3404 ◽  
Author(s):  
Ishak ◽  
Lee ◽  
Singh ◽  
Ariffin ◽  
Lim ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Control Sample ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Air Cooling ◽  
Geopolymer Concrete ◽  
Water Cooling ◽  
Control Samples

This paper presents the experimental results on the behavior of fly ash geopolymer concrete incorporating bamboo ash on the desired temperature (200 °C to 800 °C). Different amounts of bamboo ash were investigated and fly ash geopolymer concrete was considered as the control sample. The geopolymer was synthesized with sodium hydroxide and sodium silicate solutions. Ultrasonic pulse velocity, weight loss, and residual compressive strength were determined, and all samples were tested with two different cooling approaches i.e., an air-cooling (AC) and water-cooling (WC) regime. Results from these tests show that with the addition of 5% bamboo ash in fly ash, geopolymer exhibited a 5 MPa (53%) and 5.65 MPa (66%) improvement in residual strength, as well as 940 m/s (76%) and 727 m/s (53%) greater ultrasonic pulse velocity in AC and WC, respectively, at 800 °C when compared with control samples. Thus, bamboo ash can be one of the alternatives to geopolymer concrete when it faces exposure to high temperatures.

scholarly journals Empirical Investigation on Compressive Strength of Geopolymer and Conventional Concretes by Nondestructive Method

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
B. Ravali ◽  
K. Bala Gopi Krishna ◽  
D. Ravi Kanth ◽  
K. J. Brahma Chari ◽  
S. Venkatesa Prabhu ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Nondestructive Method ◽  
Geopolymer Concrete ◽  
River Sand ◽  
Rebound Hammer ◽  
Compressive Strength Of Concrete

Need of construction is increasing due to increase in population growth rate. The geopolymer concrete is eco-friendly than ordinary concrete. Current experimental investigation was conducted on ordinary and geopolymer concrete using nondestructive testing (NDT) tests like ultrasonic pulse velocity (UPV) test and rebound hammer (RH) test. Cube specimens of dimensions 150 mm × 150 mm × 150 mm are used to conduct these tests at 7, 14, and 28 days. Proportions considered for concrete are cement-fly ash-river sand (100-0-100% and 60-40-100%), cement-fly ash-robo sand (100-0-100% and 60-40-100%) whereas geopolymer concrete fly ash-metakaolin is taken in proportions of 100-0%, 60-40%, and 50-50%. Alkaline activators (sodium hydroxide and sodium silicate with molarity 12M) were used in preparing geopolymer concrete. The major objective of the current study is to obtain relation between compressive strength of concrete and UPV values.

An Ultrasonic Pulse Velocity Test on Fly-Ash Based Geopolymer Concrete in Frequency Domains

2014 ◽  
Vol 700 ◽  
pp. 310-313 ◽  
Author(s):  
Jee Sang Kim ◽  
Tae Hong Kim
Keyword(s):  
Compressive Strength ◽  
Construction Material ◽  
High Strength ◽  
Ultrasonic Pulse Velocity ◽  
Peak Frequency ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
P Wave ◽  
Geopolymer Concrete ◽  
Existing Structures

The Non-Destructive Test techniques on concrete, which can assess the properties of materials without damages, have been developed as the deteriorations of existing structures increase. Among them, the ultrasonic pulse velocity (USPV) method is widely used because it can investigate the states of one material for a long time and repeatedly. However, there have been few researches on the NDT application to geopolymer concrete which is environment friendly construction material without any cement. This paper investigates the variations of ultrasonic pulse velocity and peak frequency of geopolymer concrete under monotonically increasing loads to assess the material conditions with various compressive strength levels by measuring P-wave signals. The pulse velocities and peak frequencies were higher in high strength geopolymer concrete specimens. There are not explicit relations between strength levels and peak frequencies but the peak frequencies are strongly influenced by the applied stress levels. In addition, a predicting equation for compressive strength of geopolymer concrete is derived based on experimental data in similar form for normal concrete.

scholarly journals Effect of alkali content and slag content on the fresh and hardened properties of air-cured alkali activated mortar containing fly ash

2021 ◽  
Author(s):  
Thushara Raju ◽  
Namitha S ◽  
Muhammed Nabil K ◽  
Mohammed Rafeeque N. V ◽  
Reshma Sundhar ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Construction Material ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Alkali Content ◽  
Hardened Properties ◽  
Alkali Activated ◽  
Slag Content

Alkali Activated Material (AAM) is introduced as a pioneering construction material in the construction diligence to trim down the utilization of Ordinary Portland Cement (OPC) and to curtail the amount of carbon dioxide released during the production of OPC. Modestly refined industrial by products or natural materials rich in alumino silicates are the binding agents used in AAM. Generally, heat curing is needed for the alkali activated mortar to achieve the required hardened properties and this difficulty can be overcome by adding slag to the mix. In this experimental analysis, the alkali activated mortar mixes with different proportions of glassy granulated slag and Class F fly ash were prepared without the usage of superplasticizers, with alkali to binder (a/b) ratios of 0.7, 0.8 and 0.9. The rheological characteristics of mortar were studied using flow table apparatus and hardened properties were studied using compressive strength test and ultrasonic pulse velocity (UPV) test by testing cylindrical specimens of size 25 mm diameter and 50 mm height. The mortar specimens were air-cured, and the compressive strength and UPV test were conducted after 3 and 7 days. The test results showed that due to the presence of higher alkali content and the decrease in slag content, the workability of alkali activated mortar was improved, but the measure of strength decreased. The mix with 100% slag and a/b ratio of 0.8 had the best UPV value, indicating its quality among the various mortar mixes studied. This study portrays the significance of optimising the alkali and slag content in tailor making an alkali activated mortar system with good hardened properties.

scholarly journals Characteristics of Preplaced Aggregate Concrete Fabricated with Alkali-Activated Slag/Fly Ash Cements

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 591
Author(s):  
Salman Siddique ◽  
Hyeju Kim ◽  
Hyemin Son ◽  
Jeong Gook Jang
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Water Absorption ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Cement Grout ◽  
Aggregate Concrete ◽  
Alkali Activated ◽  
Alkali Activated Cement

This study assesses the characteristics of preplaced aggregate concrete prepared with alkali-activated cement grout as an adhesive binder. Various binary blends of slag and fly ash without fine aggregate as a filler material were considered along with different solution-to-solid ratios. The properties of fresh and hardened grout along with the properties of hardened preplaced concrete were investigated, as were the compressive strength, ultrasonic pulse velocity, density, water absorption and total voids of the preplaced concrete. The results indicated that alkali-activated cement grout has better flowability characteristics and compressive strength than conventional cement grout. As a result, the mechanical performance of the preplaced aggregate concrete was significantly improved. The results pertaining to the water absorption and porosity revealed that the alkali-activated preplaced aggregate concrete is more resistant to water permeation. The filling capacity based on the ultrasonic pulse velocity value is discussed to comment on the wrapping ability of alkali-activated cement grout.

scholarly journals Eco-Friendly Chopped Tire Rubber as Reinforcements in Fly Ash Geopolymer Concrete

2020 ◽  
Keyword(s):  
Fly Ash ◽  
Mechanical Performance ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Industrial Wastes ◽  
Fine Aggregate ◽  
Geopolymer Concrete ◽  
Tire Rubber ◽  
Naoh Solution

<p>One of the major challenges faced by researchers is to recycle industrial wastes in a manner that reduces their environmental impact in nature. An experimental study was carried out to determine the suitability of using chopped tire rubber as reinforcements in green and sustainable geopolymer concrete, with the purpose of using them as nonstructural products. The geopolymer mixture was made by mixing of fly ash powder, fine aggregate, and Superplasticizer in Na2SiO3/NaOH solution. Mixtures were divided into four different groups, with constant water to fly ash ratio of 0.12 and alkaline dosage of 45% by weight of fly ash, based on the recycled chopped tire rubber (CTR) content: 0, 10, 20, and 30% by volume of fine aggregate with two maximum sizes (2 and 4mm). Hardened properties of resulted geopolymer like compressive strength, density; and ultrasonic pulse velocity were examined at 28d. Besides that, X-Ray diffractometer and Scanning Electron Microscope were used in order to observe the microstructure of the resulted geopolymer concrete. In view of the consequences for this study, it is preferable to replace no more than 10% of fine aggregate in geopolymer concrete by CTR. In addition, according to SEM photographs, increasing the CTR content more voids will be pronounced and thus, decreasing the mechanical performance.</p>

Effect of Treated Sago Pith Waste Ash and Silica Fume to the Mechanical Properties of Fly Ash-Based Geopolymer Brick

2021 ◽  
Vol 879 ◽  
pp. 100-114
Author(s):  
Izwan B. Johari ◽  
Md Azlin Md Said ◽  
Mohd Amirul B. Mohd Snin ◽  
Nur Farah Aqilah Bt. Ayob ◽  
Nur Syafiqah Bt. Jamaluddin ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Silica Fume ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Partial Replacement ◽  
Rebound Hammer ◽  
Compressive Strength Test ◽  
Sago Pith Waste

This paper investigates the effect of partial replacement of fly ash with sago pith waste ash and silica fume in fabricating the geopolymer mortar concrete. The mixtures of geopolymer mortar concrete were prepared by replacing sago pith waste ash and silica fume at 5% of total weight of fly ash. There were six specimens of geopolymer mortar cubes and bricks fabricated in this study. The specimens are tested with compressive strength test, rebound hammer test and ultrasonic pulse velocity test. The results from the tests are compared with some existing published works as to clarify the effect of replacing the fly ash with sago waste and silica fume on the strength of concrete. Comparisons had been made and concluded that the molarity of alkaline solution, Al3O2 and CaO influenced the development of compressive strength along the curing time of fly ash based geopolymer concrete.

The Effect of Chloride Environment on Mechanical Properties Geopolymer Binder with Fly Ash

2013 ◽  
Vol 594-595 ◽  
pp. 648-655 ◽  
Author(s):  
Muhammad Sigit Darmawan ◽  
Ridho Bayuaji ◽  
Boedi Wibowo ◽  
Nur Ahmad Husin ◽  
Srie Subekti
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fly Ash ◽  
Design Method ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
National Standard ◽  
Vacuum Saturation ◽  
Chloride Environment

This study is conducted to determine the effect of five variables on mechanical properties of geopolymer binders. These five variables are chloride environment, NaOH molarity, Na2SiO3/NaOH ratio, fly ash/alkaline activator (FA/AA) ratio and superplasticizer (SP) addition. The mechanical properties considered are compressive strength, porosity and density. Taguchi experimental design method is used to compile the binder composition of geopolymer to achieve the maximum compressive strength. Specimens binder used is a cylinder with 25 mm diameter and 50 mm height. Compressive strength test is performed at 28 days using SNI 03-6825-2002 (Indonesian National Standard) and porosity of the binder is determined using vacuum saturation apparatus similar to that developed by RILEM. The density of the binder is measured using Ultrasonic Pulse Velocity (UPV). This study concludes that the chloride environment has a beneficial effect on the compressive strength of the binder. In addition, the FA/AA ratio and NaOH molarity give a significant effect on the compressive strength of geopolymer binders.

scholarly journals A Study on Cement-free Geopolymer Concrete incorporated with industrial waste Cured at Open Environment for different molarities of sodium hydroxide

2021 ◽  
Keyword(s):  
Compressive Strength ◽  
Sodium Hydroxide ◽  
Ultrasonic Pulse Velocity ◽  
Strength Properties ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Cement Industry ◽  
Geopolymer Concrete ◽  
Regression Equations ◽  
Waste Products

<p>Nowadays, the increase in population and industrial growth that generates lot of waste products which creates disposal problems and severe environmental hazards. The cement industry is one of the important sectors which liberates greenhouse gas such as carbon dioxide. The consumption of waste products which eradicate the disposal issues and also it diminishes the emission of greenhouse gases to the environment. This is an important reason for the introduction of cement-free Geopolymer Concrete. This paper was invented to understand the suitability of Geopolymer Concrete cured at ambient temperature in the construction industry and the effect of molarity on strength properties. Totally, five types of Geopolymer Concrete mixes were prepared by altering the molarities of sodium hydroxide like 4M, 6M, 8M, 10M and 12M. The compressive strengths (1, 3, 7, 14 and 28 days), splitting tensile strengths (7, 14 and 28 days) and flexural strengths at 28 days were studied for aforesaid molarities. Generally, the rise in molarity increases the compressive strength. The ultimate strength was achieved up to 57.53MPa at 28 days for 8M Geopolymer Concrete. For the validation of compressive strength predicted by Destructive test (DT), the Non-Destructive tests (NDT) (Rebound Hammer and Ultrasonic pulse velocity) were carried out at resembled age of curing. Regression analysis is also done between compressive strength established by DT and NDT results. The arrived linear regression equations were well correlated with the experimental results and the co-efficient (R2) values varied from 0.8970-0.9967.</p>

Sign in / Sign up

Export Citation Format

Share Document