scholarly journals Electrochemical-Based Biosensors on Different Zinc Oxide Nanostructures: A Review

Materials ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 2985 ◽  
Author(s):  
Muhammad Luqman Mohd Napi ◽  
Suhana Mohamed Sultan ◽  
Razali Ismail ◽  
Khoo Wei How ◽  
Mohd Khairul Ahmad
Keyword(s):  
Surface Area ◽  
Active Sites ◽  
Hollow Spheres ◽  
Three Dimensional ◽  
Electrochemical Biosensors ◽  
Two Dimensional ◽  
Zno Nanostructures ◽  
Zinc Oxide Nanostructures ◽  
One Dimensional ◽  
Materials Used

Electrochemical biosensors have shown great potential in the medical diagnosis field. The performance of electrochemical biosensors depends on the sensing materials used. ZnO nanostructures play important roles as the active sites where biological events occur, subsequently defining the sensitivity and stability of the device. ZnO nanostructures have been synthesized into four different dimensional formations, which are zero dimensional (nanoparticles and quantum dots), one dimensional (nanorods, nanotubes, nanofibers, and nanowires), two dimensional (nanosheets, nanoflakes, nanodiscs, and nanowalls) and three dimensional (hollow spheres and nanoflowers). The zero-dimensional nanostructures could be utilized for creating more active sites with a larger surface area. Meanwhile, one-dimensional nanostructures provide a direct and stable pathway for rapid electron transport. Two-dimensional nanostructures possess a unique polar surface for enhancing the immobilization process. Finally, three-dimensional nanostructures create extra surface area because of their geometric volume. The sensing performance of each of these morphologies toward the bio-analyte level makes ZnO nanostructures a suitable candidate to be applied as active sites in electrochemical biosensors for medical diagnostic purposes. This review highlights recent advances in various dimensions of ZnO nanostructures towards electrochemical biosensor applications.

Fluoride sensing performance of fluorescent NH2-MIL-53(Al): 2D Nanosheets vs. 3D Bulk

2021 ◽  
Author(s):  
Zixuan Li ◽  
Deyi Zhan ◽  
Abdul Saeed ◽  
Nanjing Zhao ◽  
Junfeng Wang ◽  
...  
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Active Sites ◽  
Metal Organic Frameworks ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Metal Organic ◽  
2D Nanosheets ◽  
Fluoride Sensing ◽  
Sensing Performance

Due to the ultra-thin morphology, larger specific surface area and more exposed active sites, two-dimensional (2D) metal-organic frameworks (MOFs) nanosheets can break the limitations of three-dimensional (3D) MOFs in sensitivity,...

Hydrothermal synthesis of a 3D double-sided comb-like ZnO nanostructure and its growth mechanism analysis

2016 ◽  
Vol 52 (53) ◽  
pp. 8231-8234 ◽  
Author(s):  
Wenqiang Li ◽  
Shiyong Gao ◽  
Lin Li ◽  
Shujie Jiao ◽  
Hongtao Li ◽  
...  
Keyword(s):  
Hydrothermal Synthesis ◽  
Growth Mechanism ◽  
Self Assembly ◽  
Three Dimensional ◽  
Mechanism Analysis ◽  
Two Dimensional ◽  
Zno Nanostructures ◽  
One Dimensional ◽  
Zno Nanostructure ◽  
2D Nanosheets

Self-assembly of two-dimensional (2D) nanosheets and one-dimensional (1D) nanorods into three-dimensional (3D) double-sided comb-like ZnO nanostructures has been successfully performed on Si and ITO substrates.

Transformations of two-dimensional layered zinc phosphates to three-dimensional and one-dimensional structures

2002 ◽  
Vol 12 (4) ◽  
pp. 1044-1052 ◽  
Author(s):  
Amitava Choudhury ◽  
S. Neeraj ◽  
Srinivasan Natarajan ◽  
C. N. R. Rao
Keyword(s):  
Three Dimensional ◽  
Two Dimensional ◽  
One Dimensional ◽  
Zinc Phosphates

Mine Impact Burial Prediction From One to Three Dimensions

2008 ◽  
Vol 62 (1) ◽  
Author(s):  
Peter C. Chu
Keyword(s):  
Three Dimensional ◽  
Time History ◽  
Three Dimensions ◽  
Vertical Position ◽  
Burial Depth ◽  
Prediction Errors ◽  
Two Dimensional ◽  
Dimensional Model ◽  
One Dimensional ◽  
Dimensional Models

The Navy’s mine impact burial prediction model creates a time history of a cylindrical or a noncylindrical mine as it falls through air, water, and sediment. The output of the model is the predicted mine trajectory in air and water columns, burial depth/orientation in sediment, as well as height, area, and volume protruding. Model inputs consist of parameters of environment, mine characteristics, and initial release. This paper reviews near three decades’ effort on model development from one to three dimensions: (1) one-dimensional models predict the vertical position of the mine’s center of mass (COM) with the assumption of constant falling angle, (2) two-dimensional models predict the COM position in the (x,z) plane and the rotation around the y-axis, and (3) three-dimensional models predict the COM position in the (x,y,z) space and the rotation around the x-, y-, and z-axes. These models are verified using the data collected from mine impact burial experiments. The one-dimensional model only solves one momentum equation (in the z-direction). It cannot predict the mine trajectory and burial depth well. The two-dimensional model restricts the mine motion in the (x,z) plane (which requires motionless for the environmental fluids) and uses incorrect drag coefficients and inaccurate sediment dynamics. The prediction errors are large in the mine trajectory and burial depth prediction (six to ten times larger than the observed depth in sand bottom of the Monterey Bay). The three-dimensional model predicts the trajectory and burial depth relatively well for cylindrical, near-cylindrical mines, and operational mines such as Manta and Rockan mines.

Theory of ultrasonic attenuation in one and two dimensional metals

1976 ◽  
Vol 54 (14) ◽  
pp. 1454-1460 ◽  
Author(s):  
T. Tiedje ◽  
R. R. Haering
Keyword(s):  
Ultrasonic Attenuation ◽  
Three Dimensional ◽  
Electronic Systems ◽  
Two Dimensional ◽  
Temperature Dependent ◽  
One Dimensional ◽  
The Difference

The theory of ultrasonic attenuation in metals is extended so that it applies to quasi one and two dimensional electronic systems. It is shown that the attenuation in such systems differs significantly from the well-known results for three dimensional systems. The difference is particularly marked for one dimensional systems, for which the attenuation is shown to be strongly temperature dependent.

Three-dimensional graphene encapsulated hollow CoSe2-SnSe2 nanoboxes for high performance asymmetric supercapacitors

2022 ◽  
Author(s):  
Kainan Li ◽  
Ke Zheng ◽  
Zhifang Zhang ◽  
Kuan Li ◽  
Ziyao Bian ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Active Sites ◽  
Specific Capacity ◽  
Three Dimensional ◽  
Hollow Structure ◽  
Large Specific Surface Area ◽  
Composite Aerogel

Abstract Construction of metal selenides with a large specific surface area and a hollow structure is one of the effective methods to improve the electrochemical performance of supercapacitors. However, the nano-material easily agglomerates due to the lack of support, resulting in the loss of electrochemical performance. Herein, we successfully design a three-dimensional graphene (3DG) encapsulation-protected hollow nanoboxes (CoSe2-SnSe2) composite aerogel (3DG/CoSe2-SnSe2) via a co-precipitation method coupled with self-assembly route, followed by a high temperature selenidation strategy. The obtained aerogel possesses porous 3DG conductive network, large specific surface area and plenty of reactive active sites. It could be used as a flexible and binder-free electrode after a facile mechanical compression process, which provided a high specific capacitance of 460 F g-1 at 0.5 A g-1, good rate capability of 212.7 F g-1 at 10 A g-1, and excellent cycle stability due to the fast electron/ion transfer and electrolyte diffusion. With the as-prepared 3DG/CoSe2-SnSe2 as positive electrodes and the AC (activated carbon) as negative electrodes, an asymmetric supercapacitor (3DG/CoSe2-SnSe2//AC) was fabricated, which delivered a high specific capacity of 38 F g-1 at 1A g-1 and an energy density of 11.89 W h kg-1 at 749.9 W kg-1, as well as a capacitance retention of 91.1% after 3000 cycles. This work provides a new method for preparing electrode material.

scholarly journals Ultrathin Co–Fe hydroxide nanosheet arrays for improved oxygen evolution during water splitting

RSC Advances ◽  
2017 ◽  
Vol 7 (37) ◽  
pp. 22818-22824 ◽  
Author(s):  
Tingting Zhou ◽  
Zhen Cao ◽  
Heng Wang ◽  
Zhen Gao ◽  
Long Li ◽  
...  
Keyword(s):  
Surface Area ◽  
Water Splitting ◽  
Oxygen Evolution ◽  
Active Sites ◽  
Three Dimensional ◽  
Fe Doping ◽  
Nanosheet Arrays ◽  
Fe Hydroxide

The Fe-doping of hierarchical Co hydroxide nanosheet arrays (CoyFe1−y(OH)x NSAs) integrated on a three-dimensional electrode is shown to contribute to both increasing the available surface area and number of active sites.

scholarly journals Three-dimensional Capsular Volume Measurements in Multidirectional Shoulder Instability

2018 ◽  
Vol 21 (3) ◽  
pp. 134-137
Author(s):  
Yong Cheol Jun ◽  
Young Lae Moon ◽  
Moustafa I Elsayed ◽  
Jae Hwan Lim ◽  
Dong Hyuk Cha
Keyword(s):  
Rotator Cuff ◽  
Surface Area ◽  
Three Dimensional ◽  
Volume Measurement ◽  
Control Group ◽  
Two Dimensional ◽  
Cross Sectional ◽  
Volume Measurements ◽  
Glenoid Surface ◽  
3D Software

BACKGROUND: In a previous study undertaken to quantify capsular volume in rotator cuff interval or axillary pouch, significant differences were found between controls and patients with instability. However, the results obtained were derived from two-dimensional cross sectional areas. In our study, we sought correlation between three-dimensional (3D) capsular volumes, as measured by magnetic resonance arthrography (MRA), and multidirectional instability (MDI) of the shoulder.METHODS: The MRAs of 21 patients with MDI of the shoulder and 16 control cases with no instability were retrospectively reviewed. Capsular areas determined by MRA were translated into 3D volumes using 3D software Mimics ver. 16 (Materilise, Leuven, Belgium), and glenoid surface area was measured in axial and coronal MRA views. Then, the ratio between capsular volume and glenoid surface area was calculated, and evaluated with control group.RESULTS: The ratio between 3D capsular volume and glenoid surface area was significantly increased in the MDI group (3.59 ± 0.83 cm³/cm²) compared to the control group (2.53 ± 0.62 cm³/cm²) (p < 0.01).CONCLUSIONS: From these results, we could support that capsular volume enlargement play an important role in MDI of the shoulder using volume measurement.

Sign in / Sign up

Export Citation Format

Share Document