scholarly journals Experimental Verification and Comparative Analysis of Equivalent Methods on Metal’s Fixed Joint Interface

Materials ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 2381 ◽  
Author(s):  
Renxiu Han ◽  
Guoxi Li ◽  
Jingzhong Gong ◽  
Meng Zhang ◽  
Kai Zhang
Keyword(s):  
Natural Frequencies ◽  
Three Dimensional ◽  
Equivalent Model ◽  
Joint Interface ◽  
Ansys Software ◽  
Theoretical Methods ◽  
Mechanics Model ◽  
Metal Joint ◽  
Three Dimensional Models ◽  
Equivalent Method

In order to effectively improve the dynamic characteristics of the fixed metal joint interface, it is important to establish a correct equivalent model of the metal joint interface. In this paper, three equivalent methods for simulating the metal joint interface are analyzed, including the virtual material method, spring damping method, finite element method, and verification by modal experiment. First, according to the contact mechanics model of the constructed metal joint interface, the physical properties of the three-dimensional models of the fixed joint interface are assigned in the ANSYS software. Then, three methods are used for the modal analysis and compared with a modal experiment. The results show that the modal shapes of the three theoretical methods are consistent with those of the experimental modes. The first five natural frequencies obtained by the virtual material method are closest to the experimental natural frequencies, and the errors are within 10%. The errors of the other two methods are between 9% and 39%. Therefore, the virtual material method is a better equivalent method of the metal joint interface.

scholarly journals Equivalent Method of Joint Interface Based on Persson Contact Theory: Virtual Material Method

Materials ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3150
Author(s):  
Renxiu Han ◽  
Guoxi Li ◽  
Jingzhong Gong ◽  
Meng Zhang ◽  
Kai Zhang
Keyword(s):  
Physical Properties ◽  
Contact Mechanics ◽  
Natural Frequencies ◽  
Dynamic Performance ◽  
Contact Theory ◽  
Joint Interface ◽  
Mechanics Model ◽  
Metal Joint ◽  
Interface Contact ◽  
Equivalent Method

An accurate equivalent method of metal joint interface is of great significance to optimize the dynamic performance of the whole machine. Therefore, it is necessary to establish an accurate equivalent method of joint interface. The virtual material method is a precise equivalent method of joint interface. The traditional virtual material method is based on the M–B fractal contact theory. By modeling the contact mechanics of the joint interface, the physical properties of the virtual material are obtained separately, such as elastic modulus, Poisson’s ratio and density. In this paper, Persson contact theory is used to establish the interface contact mechanics model to find the physical properties of virtual materials. The virtual material methods constructed by two theories are respectively applied to the modal simulation to obtain the natural frequencies of the joint interface. By comparing the natural frequencies obtained by modal experiment and modal simulation, it is found that the natural frequencies obtained by the virtual material method based on Persson contact theory are closer to the results obtained by the modal experiment, and the error is within 5%. The error of the natural frequencies obtained by the virtual material method based on the M–B fractal contact theory is within 10%. Therefore, the Persson contact theory can establish a more accurate equivalent method of metal’s joint interface.

Modeling and simulation of the dynamic behavior of the macaw palm fruit-rachilla system

SIMULATION ◽  
2021 ◽  
pp. 003754972110437
Author(s):  
Mariana Ribeiro Pereira ◽  
Fábio Lúcio Santos ◽  
Nara Silveira Velloso ◽  
Flora Maria de Melo Villar ◽  
Mateus Resende Rodrigues
Keyword(s):  
Dynamic Behavior ◽  
Elasticity Modulus ◽  
Natural Frequencies ◽  
Three Dimensional ◽  
Palm Tree ◽  
Specific Mass ◽  
Palm Fruit ◽  
Modes Of Vibration ◽  
Macaw Palm ◽  
Three Dimensional Models

The macaw palm ( Acrocomia aculeata) is a palm tree native to tropical forests that stand out due to its great potential for oil production. This study was developed with the objective of constructing a high-fidelity model of the macaw palm fruit-rachilla system for the purpose of simulating its dynamic behavior when subjected to mechanical vibrations. The finite element method was used to determine the natural frequencies and modes of vibration of the system. The three-dimensional models of the fruit-rachilla systems were elaborated using CAD3D Fusion 360 software. The modal properties of the fruit-rachilla systems were obtained based on the models developed by varying the elasticity modulus values of the system. The parameters of greatest influence in the estimation of natural frequencies are the elasticity modulus, especially that of the fruit-rachilla joint, and the specific mass. The models that take into account the three-dimensional strains along the rachilla are the least sensitive to variations in the mechanical properties (elasticity modulus and specific mass) and are shown to be more representative of the actual physical system.

Thermal Analysis of Dedicated Computer Based on ANSYS

2011 ◽  
Vol 697-698 ◽  
pp. 277-281
Author(s):  
Y.R. Zhang ◽  
L. Gao ◽  
S.J. Li ◽  
H.X. Bi
Keyword(s):  
Thermal Analysis ◽  
Material Properties ◽  
Theoretical Basis ◽  
Three Dimensional ◽  
Test Results ◽  
Post Processing ◽  
Ansys Software ◽  
Computer Based ◽  
Three Dimensional Models ◽  
Setting Parameters

After creating the three-dimensional models of dedicated computer, models can be smoothly put into ANSYS through interface between Pro/E and ANSYS. By selecting the grid cells, setting parameters of material properties, dividing grids, applying load and boundary conditions and post-processing, the temperature contours of the whole case and its key components are got. Compared with the test results, it was verified that the feasibility and rationality of carrying out thermal simulation by ANSYS software, providing a theoretical basis for the designers to optimize dedicated computer case.

Plastic replicas as three-dimensional models of pulps

1975 ◽  
Vol 39 (8) ◽  
pp. 544-546
Author(s):  
HL Wakkerman ◽  
GS The ◽  
AJ Spanauf
Keyword(s):  
Three Dimensional ◽  
Dimensional Models ◽  
Three Dimensional Models

Validation of a Belt Model for Prediction of Hub Forces from a Rolling Tire4

2009 ◽  
Vol 37 (2) ◽  
pp. 62-102 ◽  
Author(s):  
C. Lecomte ◽  
W. R. Graham ◽  
D. J. O’Boy
Keyword(s):  
Internal Pressure ◽  
Equations Of Motion ◽  
Three Dimensional ◽  
Prediction Method ◽  
Analytical Models ◽  
Beam Model ◽  
Impedance Boundary ◽  
Bending Waves ◽  
Tire Rotation ◽  
Three Dimensional Models

Abstract An integrated model is under development which will be able to predict the interior noise due to the vibrations of a rolling tire structurally transmitted to the hub of a vehicle. Here, the tire belt model used as part of this prediction method is first briefly presented and discussed, and it is then compared to other models available in the literature. This component will be linked to the tread blocks through normal and tangential forces and to the sidewalls through impedance boundary conditions. The tire belt is modeled as an orthotropic cylindrical ring of negligible thickness with rotational effects, internal pressure, and prestresses included. The associated equations of motion are derived by a variational approach and are investigated for both unforced and forced motions. The model supports extensional and bending waves, which are believed to be the important features to correctly predict the hub forces in the midfrequency (50–500 Hz) range of interest. The predicted waves and forced responses of a benchmark structure are compared to the predictions of several alternative analytical models: two three dimensional models that can support multiple isotropic layers, one of these models include curvature and the other one is flat; a one-dimensional beam model which does not consider axial variations; and several shell models. Finally, the effects of internal pressure, prestress, curvature, and tire rotation on free waves are discussed.

In Silico Identification and Molecular Characterization of Extracellular Cathepsin L Proteases from Giardia duodenalis

2020 ◽  
Vol 17 (4) ◽  
pp. 342-351
Author(s):  
Sergio A. Durán-Pérez ◽  
José G. Rendón-Maldonado ◽  
Lucio de Jesús Hernandez-Diaz ◽  
Annete I. Apodaca-Medina ◽  
Maribel Jiménez-Edeza ◽  
...  
Keyword(s):  
In Silico ◽  
Cathepsin L ◽  
Three Dimensional ◽  
Giardia Duodenalis ◽  
Evolutionary Genetics ◽  
Extracellular Proteins ◽  
In Silico Identification ◽  
Dimensional Models ◽  
Three Dimensional Models

Background: The protozoan Giardia duodenalis, which causes giardiasis, is an intestinal parasite that commonly affects humans, mainly pre-school children. Although there are asymptomatic cases, the main clinical features are chronic and acute diarrhea, nausea, abdominal pain, and malabsorption syndrome. Little is currently known about the virulence of the parasite, but some cases of chronic gastrointestinal alterations post-infection have been reported even when the infection was asymptomatic, suggesting that the cathepsin L proteases of the parasite may be involved in the damage at the level of the gastrointestinal mucosa. Objective: The aim of this study was the in silico identification and characterization of extracellular cathepsin L proteases in the proteome of G. duodenalis. Methods: The NP_001903 sequence of cathepsin L protease from Homo sapienswas searched against the Giardia duodenalisproteome. The subcellular localization of Giardia duodenaliscathepsin L proteases was performed in the DeepLoc-1.0 server. The construction of a phylogenetic tree of the extracellular proteins was carried out using the Molecular Evolutionary Genetics Analysis software (MEGA X). The Robetta server was used for the construction of the three-dimensional models. The search for possible inhibitors of the extracellular cathepsin L proteases of Giardia duodenaliswas performed by entering the three-dimensional structures in the FINDSITEcomb drug discovery tool. Results: Based on the amino acid sequence of cathepsin L from Homo sapiens, 8 protein sequences were identified that have in their modular structure the Pept_C1A domain characteristic of cathepsins and two of these proteins (XP_001704423 and XP_001704424) are located extracellularly. Threedimensional models were designed for both extracellular proteins and several inhibitory ligands with a score greater than 0.9 were identified. In vitrostudies are required to corroborate if these two extracellular proteins play a role in the virulence of Giardia duodenalisand to discover ligands that may be useful as therapeutic targets that interfere in the mechanism of pathogenesis generated by the parasite. Conclusion: In silicoanalysis identified two proteins in the Giardia duodenalisprotein repertoire whose characteristics allowed them to be classified as cathepsin L proteases, which may be secreted into the extracellular medium to act as virulence factors. Three-dimensional models of both proteins allowed the identification of inhibitory ligands with a high score. The results suggest that administration of those compounds might be used to block the endopeptidase activity of the extracellular cathepsin L proteases, interfering with the mechanisms of pathogenesis of the protozoan parasite Giardia duodenalis.

Handheld Laser Scanner Research

2019 ◽  
Vol 952 (10) ◽  
pp. 47-54
Author(s):  
A.V. Komissarov ◽  
A.V. Remizov ◽  
M.M. Shlyakhova ◽  
K.K. Yambaev
Keyword(s):  
Point Cloud ◽  
Three Dimensional ◽  
Laser Scanner ◽  
Test Site ◽  
Optical Systems ◽  
Advantages And Disadvantages ◽  
Site Survey ◽  
Laser Scanners ◽  
Three Dimensional Models ◽  
The Stability

The authors consider hand-held laser scanners, as a new photogrammetric tool for obtaining three-dimensional models of objects. The principle of their work and the newest optical systems based on various sensors measuring the depth of space are described in detail. The method of simultaneous navigation and mapping (SLAM) used for combining single scans into point cloud is outlined. The formulated tasks and methods for performing studies of the DotProduct (USA) hand-held laser scanner DPI?8X based on a test site survey are presented. The accuracy requirements for determining the coordinates of polygon points are given. The essence of the performed experimental research of the DPI?8X scanner is described, including scanning of a test object at various scanner distances, shooting a test polygon from various scanner positions and building point cloud, repeatedly shooting the same area of the polygon to check the stability of the scanner. The data on the assessment of accuracy and analysis of research results are given. Fields of applying hand-held laser scanners, their advantages and disadvantages are identified.

scholarly journals Comparative Analysis of Digital Models of Objects of Cultural Heritage Obtained by the “3D SLS” and “SfM” Methods

2021 ◽  
Vol 11 (12) ◽  
pp. 5321
Author(s):  
Marcin Barszcz ◽  
Jerzy Montusiewicz ◽  
Magdalena Paśnikowska-Łukaszuk ◽  
Anna Sałamacha
Keyword(s):  
Cultural Heritage ◽  
Low Cost ◽  
Three Dimensional ◽  
3D Models ◽  
Silk Road ◽  
Digital Models ◽  
Global Pandemic ◽  
University Of Technology ◽  
Three Dimensional Models ◽  
3D Digitisation

In the era of the global pandemic caused by the COVID-19 virus, 3D digitisation of selected museum artefacts is becoming more and more frequent practice, but the vast majority is performed by specialised teams. The paper presents the results of comparative studies of 3D digital models of the same museum artefacts from the Silk Road area generated by two completely different technologies: Structure from Motion (SfM)—a method belonging to the so-called low-cost technologies—and by Structured-light 3D Scanning (3D SLS). Moreover, procedural differences in data acquisition and their processing to generate three-dimensional models are presented. Models built using a point cloud were created from data collected in the Afrasiyab museum in Samarkand (Uzbekistan) during “The 1st Scientific Expedition of the Lublin University of Technology to Central Asia” in 2017. Photos for creating 3D models in SfM technology were taken during a virtual expedition carried out under the “3D Digital Silk Road” program in 2021. The obtained results show that the quality of the 3D models generated with SfM differs from the models from the technology (3D SLS), but they may be placed in the galleries of the vitrual museum. The obtained models from SfM do not have information about their size, which means that they are not fully suitable for archiving purposes of cultural heritage, unlike the models from SLS.

Sign in / Sign up

Export Citation Format

Share Document