scholarly journals Structure Determination of Er Doped Ti-Al-Nb Alloy by Neutron Diffraction Analysis

Materials ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2243
Author(s):  
Yubin Ke ◽  
Juzhou Tao ◽  
Huiping Duan
Keyword(s):  
Neutron Diffraction ◽  
Grain Refinement ◽  
Elastic Anisotropy ◽  
Compressive Loading ◽  
Microscopy Study ◽  
Electron Microscopy Study ◽  
Primary Phase ◽  
Martensitic Phase Transition ◽  
Lattice Strains ◽  
Er Doped

Neutron diffraction experiments with both conventional powder diffraction setup and under in-situ compressive loading were conducted to investigate the structural origins of large strength and toughness enhancements in Ti-16Al-27Nb alloy after Er addition. The primary phase is determined to be the ordered B2 structure form, in agreement with the previous electron microscopy study. Lattice strains of {210} and {100} planes were measured as a function of applied stress, and elastic anisotropy was found for both, and strong plastic nonlinearity was discovered for (210) reflection. The grain refinement during plastic deformation was proposed by both the 2D diffraction intensity distribution and SEM observations, while stress-induced martensitic phase transition was not observed in this study. It is believed that the activation of different slip systems and grain refinement might be the structural origin of the novel mechanical properties of this alloy.

Structural Properties and Stability of Metastable Phases in the Zr-Nb System

2005 ◽  
Vol 480-481 ◽  
pp. 565-572 ◽  
Author(s):  
G. Aurelio ◽  
A. Fernández Guillermet ◽  
G.J. Cuello ◽  
P.B. Bozzano
Keyword(s):  
Neutron Diffraction ◽  
Structural Properties ◽  
Room Temperature ◽  
Microscopy Study ◽  
Electron Microscopy Study ◽  
Lattice Parameters ◽  
Effect Of Temperature ◽  
Neutron Diffraction Data ◽  
Temperature Changes ◽  
Vegard’S Law

The lattice parameters of the bcc (b) and omega (W) phases occurring metastably in a series of Zr-rich Zr-Nb alloys have been determined at and above room temperature (TR) using neutron diffraction techniques. In the first place, the effect of temperature changes upon the lattice parameters of the b and W phases in alloys with 10 and 18 at.% Nb was monitored using neutron thermodiffraction. A method of analysis is applied to the data which involves a confrontation between the observed structural properties and an idealised -or ``reference'- behaviour (RB) which admits a simple mathematical description. A generalised form of Vegard's law is adopted as RB for the b phase, whereas a specific RB is proposed for the W structure. The experimental data are well accounted for by this interpretation scheme, leading to a picture of the isothermal reactions occurring at high temperature which involves the transfer of Nb from the W to the b phase. Finally, the neutron diffraction data on the W phase are combined with an electron microscopy study for the alloy with 10 at.% Nb aged at 773 K, which provides information on the composition of this phase and its evolution towards thermodynamic equilibrium.

scholarly journals Neutron Diffraction Studies of the Zr/Nb Effects on the Nb3Sn Phase Formation of Monofilament Wires

2007 ◽  
Vol 546-549 ◽  
pp. 1901-1906
Author(s):  
Jean Louis Soubeyroux ◽  
C.W. Zhang ◽  
Andre Sulpice ◽  
Lian Zhou ◽  
X.D. Tang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Growth Rate ◽  
Neutron Diffraction ◽  
Microscopy Study ◽  
Neutron Diffraction Study ◽  
Electron Microscopy Study ◽  
Layer Growth ◽  
High Temperature Heat Treatment ◽  
Heating Treatment ◽  
A15 Phase

The layer growth of the A15 (Nb3Sn) superconducting phase produced by the internal tin method on model monofilament wires was studied by neutron diffraction and electron microscopy techniques. Different ratios of the inner part of the wire (Sn/Cu) and the effect of the addition of 1% of zirconium to niobium were studied. The high temperature heat treatment plays a key role on the A15 formation and on the cost of the final wires produced. Different temperatures in the range 650-725°C and different annealing times in the range 8-200 hrs have led to the preparation of 72 different samples. The neutron diffraction study has evidenced the different phases formed during the heating treatment and the electron microscopy study has evidenced a power law for the growth rate of the A15 phase. In both studies the addition of zirconium in niobium is very effective on the growth rate of the A15 phase.

A High Voltage Electron Microscopy Study of Sub-Oxide Formation in Vanadium

1971 ◽  
Vol 29 ◽  
pp. 212-213
Author(s):  
R. H. Geiss ◽  
R. L. Ladd ◽  
K. R. Lawless
Keyword(s):  
High Vacuum ◽  
Microscopy Study ◽  
Electron Microscopy Study ◽  
Ultra High Vacuum ◽  
Pure Oxygen ◽  
Pressure Oxidation ◽  
High Voltage Electron Microscopy ◽  
Oxidation Study ◽  
Voltage Electron ◽  
Good Agreement

Detailed electron microscope and diffraction studies of the sub-oxides of vanadium have been reported by Cambini and co-workers, and an oxidation study, possibly complicated by carbon and/or nitrogen, has been published by Edington and Smallman. The results reported by these different authors are not in good agreement. For this study, high purity polycrystalline vanadium samples were electrochemically thinned in a dual jet polisher using a solution of 20% H2SO4, 80% CH3OH, and then oxidized in an ion-pumped ultra-high vacuum reactor system using spectroscopically pure oxygen. Samples were oxidized at 350°C and 100μ oxygen pressure for periods of 30,60,90 and 160 minutes. Since our primary interest is in the mechanism of the low pressure oxidation process, the oxidized samples were cooled rapidly and not homogenized. The specimens were then examined in the HVEM at voltages up to 500 kV, the higher voltages being necessary to examine thick sections for which the oxidation behavior was more characteristic of the bulk.

Factors influencing adhesive bonding at the bone/implant interface

1992 ◽  
Vol 50 (2) ◽  
pp. 1114-1115
Author(s):  
Julie A. Martini ◽  
Robert H. Doremus
Keyword(s):  
Electron Microscopy ◽  
Adhesive Bonding ◽  
Microscopy Study ◽  
Electron Microscopy Study ◽  
Bone Implant ◽  
Factors Influencing ◽  
Lr White ◽  
Transmission Electron ◽  
New Zealand White Rabbits ◽  
Scanning Electron

Tracy and Doremus have demonstrated chemical bonding between bone and hydroxylapatite with transmission electron microscopy. Now researchers ponder how to improve upon this bond in turn improving the life expectancy and biocompatibility of implantable orthopedic devices.This report focuses on a study of the- chemical influences on the interfacial integrity and strength. Pure hydroxylapatite (HAP), magnesium doped HAP, strontium doped HAP, bioglass and medical grade titanium cylinders were implanted into the tibial cortices of New Zealand white rabbits. After 12 weeks, the implants were retrieved for a scanning electron microscopy study coupled with energy dispersive spectroscopy.Following sacrifice and careful retrieval, the samples were dehydrated through a graduated series starting with 50% ethanol and continuing through 60, 70, 80, 90, 95, and 100% ethanol over a period of two days. The samples were embedded in LR White. Again a graduated series was used with solutions of 50, 75 and 100% LR White diluted in ethanol.

Electron microscopy study of reactively sputter-deposited Ti/N films on silicon

1992 ◽  
Vol 50 (2) ◽  
pp. 1362-1363
Author(s):  
V. C. Kannan ◽  
A. K. Singh ◽  
R. B. Irwin ◽  
S. Chittipeddi ◽  
F. D. Nkansah ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Large Scale ◽  
Hexagonal Phase ◽  
Microscopy Study ◽  
Electron Microscopy Study ◽  
Process Conditions ◽  
Tin Films ◽  
Wide Range ◽  
Fcc Phase ◽  
Circuits Vlsi

Titanium nitride (TiN) films have historically been used as diffusion barrier between silicon and aluminum, as an adhesion layer for tungsten deposition and as an interconnect material etc. Recently, the role of TiN films as contact barriers in very large scale silicon integrated circuits (VLSI) has been extensively studied. TiN films have resistivities on the order of 20μ Ω-cm which is much lower than that of titanium (nearly 66μ Ω-cm). Deposited TiN films show resistivities which vary from 20 to 100μ Ω-cm depending upon the type of deposition and process conditions. TiNx is known to have a NaCl type crystal structure for a wide range of compositions. Change in color from metallic luster to gold reflects the stabilization of the TiNx (FCC) phase over the close packed Ti(N) hexagonal phase. It was found that TiN (1:1) ideal composition with the FCC (NaCl-type) structure gives the best electrical property.

Analytical Electron Microscopy Study of Second-Phase Particles in 7075 and 7475 Aluminum Alloys

1985 ◽  
Vol 43 ◽  
pp. 348-349
Author(s):  
M. Raghavan ◽  
J. Y. Koo ◽  
J. W. Steeds ◽  
B. K. Park
Keyword(s):  
Aluminum Alloys ◽  
Silicon Oxide ◽  
Analytical Electron Microscopy ◽  
Microscopy Study ◽  
Electron Microscopy Study ◽  
Partial Substitution ◽  
Second Phase ◽  
X Ray ◽  
Second Phase Particles ◽  
Almost All

X-ray microanalysis and Convergent Beam Electron Diffraction (CBD) studies were conducted to characterize the second phase particles in two commercial aluminum alloys -- 7075 and 7475. The second phase particles studied were large (approximately 2-5μm) constituent phases and relatively fine ( ∼ 0.05-1μn) dispersoid particles, Figures 1A and B. Based on the crystal structure and chemical composition analyses, the constituent phases found in these alloys were identified to be Al7Cu2Fe, (Al,Cu)6(Fe,Cu), α-Al12Fe3Si, Mg2Si, amorphous silicon oxide and the modified 6Fe compounds, in decreasing order of abundance. The results of quantitative X-ray microanalysis of all the constituent phases are listed in Table I. The data show that, in almost all the phases, partial substitution of alloying elements occurred resulting in small deviations from the published stoichiometric compositions of the binary and ternary compounds.

Electron microscopy study of shock synthesis of silicides

1993 ◽  
Vol 51 ◽  
pp. 1162-1163
Author(s):  
Kenneth S. Vecchio
Keyword(s):  
Shock Wave ◽  
Plastic Deformation ◽  
Close Contact ◽  
Microscopy Study ◽  
High Energy ◽  
Electron Microscopy Study ◽  
Powder Materials ◽  
Porous Powder ◽  
Wave Effects ◽  
Wave Passage

Shock-induced reactions (or shock synthesis) have been studied since the 1960’s but are still poorly understood, partly due to the fact that the reaction kinetics are very fast making experimental analysis of the reaction difficult. Shock synthesis is closely related to combustion synthesis, and occurs in the same systems that undergo exothermic gasless combustion reactions. The thermite reaction (Fe2O3 + 2Al -> 2Fe + Al2O3) is prototypical of this class of reactions. The effects of shock-wave passage through porous (powder) materials are complex, because intense and non-uniform plastic deformation is coupled with the shock-wave effects. Thus, the particle interiors experience primarily the effects of shock waves, while the surfaces undergo intense plastic deformation which can often result in interfacial melting. Shock synthesis of compounds from powders is triggered by the extraordinarily high energy deposition rate at the surfaces of the powders, forcing them in close contact, activating them by introducing defects, and heating them close to or even above their melting temperatures.

Sign in / Sign up

Export Citation Format

Share Document