scholarly journals Aging of Bioactive Glass-Based Foams: Effects on Structure, Properties, and Bioactivity

Materials ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1485 ◽  
Author(s):  
Pier Francesco Menci ◽  
Andrea Mari ◽  
Cindy Charbonneau ◽  
Louis-Philippe Lefebvre ◽  
Luigi De Nardo
Keyword(s):  
Bioactive Glass ◽  
Chemical Species ◽  
Accelerated Tests ◽  
Aging Effects ◽  
Bioactive Glasses ◽  
Structural Support ◽  
Dental Procedures ◽  
Recent Advancement ◽  
Aging Mechanisms ◽  
Structure Properties

Bioactive glasses (BG) possess significant bone-bonding and osteogenic properties that support their use for bone defects repair in orthopaedic and dental procedures. Recent advancement enables the manufacturing of BG-based scaffolds providing structural support during bone regeneration. Despite the wide number of studies on BG and BG-based materials, little information on their aging mechanisms and shelf life is available in the literature. In this study, the evolution of chemical species on BG-based foams was investigated via accelerated tests in the presence of CO2 and humidity. The aging process led to the formation of carbonates (Na2CO3 and CaCO3) and hydrocarbonates (NaHCO3). The amount and composition of nucleated species evolved with time, affecting the structure, properties, and bioactivity of the scaffolds. This study provides a first structured report of aging effects on the structure and chemico-physical properties of bioactive glass-based scaffolds, offering an insight about the importance of their storage and packaging.

Study of the Bioactive Behavior of Thermally Treated Modified 58S Bioactive Glass

2008 ◽  
Vol 396-398 ◽  
pp. 131-134 ◽  
Author(s):  
Ourania Menti Goudouri ◽  
Xanthippi Chatzistavrou ◽  
Eleana Kontonasaki ◽  
Nikolaos Kantiranis ◽  
Lambrini Papadopoulou ◽  
...  
Keyword(s):  
Thermal Treatment ◽  
Bioactive Glass ◽  
Sol Gel ◽  
Bioactive Glasses ◽  
X Ray ◽  
Characteristic Temperatures ◽  
Calcium Silicates ◽  
Crystal Phases ◽  
Thermally Treated

Thermal treatment of bioactive glasses can affect their microstructure and thus their bioactivity. The aim of this study was the characterization of the thermally treated sol-gel-derived bioactive glass 58S at characteristic temperatures and the dependence of its bioactive behavior on the specific thermal treatment. The thermal behavior of the bioactive glass was studied by thermal analysis (TG/DTA). Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Diffractometry (XRD) were used for the characterization of the bioactive glass. The bioactive behavior in Simulated Body Fluid (SBF) was examined by Scanning Electron Microscopy (SEM-EDS) and FTIR. The major crystal phases after thermal treatment were Calcium Silicates, Wollastonite and Pseudowollastonite, while all thermally treated samples developed apatite after 48 hours in SBF. A slight enhancement of bioactivity was observed for the samples heated at the temperature range 910-970oC.

scholarly journals A thermodynamic discourse on the dissolution behavior of bioactive glasses

2016 ◽  
Vol 2 (1) ◽  
Author(s):  
Barbara Pföss ◽  
Reinhard Conradt
Keyword(s):  
Bioactive Glass ◽  
Body Fluid ◽  
Solid Material ◽  
Aqueous System ◽  
Dissolution Behavior ◽  
Glassy Material ◽  
Bioactive Glasses ◽  
Gibbs Energies ◽  
The Impact ◽  
Glass Compositions

AbstractThe interaction between bioactive glass and body fluid is crucial for the special properties of this material, therefore a large number of experimental data is available in literature. However, a frame for systematic interpretation of these results in terms of understanding the mechanisms at the interface between glass and body medium and the relation between glass composition and dissolution behavior is still missing. For two multicomponent bioactive glasses, 45S5 and 13-93, the Gibbs energies of the glassy material on one side and their aqueous system on the other side were calculated individually. The difference between solid material and aqueous system further constitutes the pH dependent Gibbs energy of hydration, ∆Ghydr. The impact of glass compositions and glassy or crystalline state on ∆Ghydr is demonstrated referring to chemical durability. Along considerations regarding the aqueous system, the thermodynamic calculations proof the precipitation of hydroxyapatite inwater and simulated body fluid for a systemcontaining P2O5 and Ca2+. In the course of deriving the Gibbs energies for bioactive glass compositions via constitutional compounds, bioactive behavior is discussed from the point of coexisting equilibrium phases in the system of Na2O-CaO-SiO2.

scholarly journals A New Generation of Electrospun Fibers Containing Bioactive Glass Particles for Wound Healing

Materials ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 5651
Author(s):  
Rachele Sergi ◽  
Valeria Cannillo ◽  
Aldo R. Boccaccini ◽  
Liliana Liverani
Keyword(s):  
Mechanical Properties ◽  
Wound Healing ◽  
Bioactive Glass ◽  
Flexible Structures ◽  
Biological Properties ◽  
Cellular Viability ◽  
Bioactive Glasses ◽  
Electrospinning Technique ◽  
Potential Applications ◽  
Biological Performance

Chitosan fibers blended with polyethylene oxide (CHIT_PEO) and crosslinked with genipin were fabricated by electrospinning technique. Subsequently, CHIT_PEO bioactive glass composite electrospun mats were fabricated with the aim to achieve flexible structures with adequate mechanical properties and improved biological performance respect to CHIT_PEO fibers, for potential applications in wound healing. Three different compositions of bioactive glasses (BG) were selected and investigated: 45S5 BG, a Sr and Mg containing bioactive glass (BGMS10) and a Zn-containing bioactive glass (BGMS_2Zn). Particulate BGs (particles size < 20 μm) were separately added to the starting CHIT_PEO solution before electrospinning. The two recently developed bioactive glasses (BGMS10 and BGMS_2Zn) showed very promising biological properties in terms of bioactivity and cellular viability; thus, such compositions were added for the first time to CHIT_PEO solution to fabricate composite electrospun mats. The incorporation of bioactive glass particles and their distribution into CHIT_PEO fibers were assessed by SEM and FTIR analyses. Furthermore, CHIT_PEO composite electrospun mats showed improved mechanical properties in terms of Young’s Modulus compared to neat CHIT_PEO fibers; on the contrary, the values of tensile strain at break (%) were comparable. Biological performance in terms of cellular viability was investigated by means of WST-8 assay and CHIT_PEO composite electrospun mats showed cytocompatibility and the desired cellular viability.

scholarly journals Hierarchical Structures and Shaped Particles of Bioactive Glass and ItsIn VitroBioactivity

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
U. Boonyang ◽  
F. Li ◽  
A. Stein
Keyword(s):  
Body Temperature ◽  
Simulated Body Fluid ◽  
Bioactive Glass ◽  
Body Fluid ◽  
Colloidal Crystals ◽  
Hierarchical Structures ◽  
The Other ◽  
Bioactive Glasses ◽  
Ordered Macroporous

In this study, bioactive glass particles with controllable structure and porosity were prepared using dual-templating methods. Block copolymers used as one template component produced mesopores in the calcined samples. Polymer colloidal crystals as the other template component yielded either three-dimensionally ordered macroporous (3DOM) products or shaped bioactive glass nanoparticles. Thein vitrobioactivity of these bioactive glasses was studied by soaking the samples in simulated body fluid (SBF) at body temperature (37°C) for varying lengths of time and monitoring the formation of bone-like apatite on the surface of the bioactive glass. A considerable bioactivity was found that all of bioactive glass samples have the ability to induce the formation of an apatite layer on its surface when in contact with SBF. The development of bone-like apatite is faster for 3DOM bioactive glasses than for nanoparticles.

Hybrid Bioactive Glass-Polyvinyl Alcohol Prepared by Sol-Gel

2008 ◽  
Vol 587-588 ◽  
pp. 62-66 ◽  
Author(s):  
Hermes S. Costa ◽  
Alexandra A.P. Mansur ◽  
Edel Figueiredo Barbosa-Stancioli ◽  
Marivalda Pereira ◽  
Herman S. Mansur
Keyword(s):  
Mechanical Properties ◽  
Polyvinyl Alcohol ◽  
Bioactive Glass ◽  
Sol Gel ◽  
Degree Of Hydrolysis ◽  
Bioactive Glasses ◽  
Composite Foams ◽  
Composition Ratios ◽  
Hybrid Scaffolds ◽  
Hydrolysis Of

Bioactive glasses are materials that have been used for the repair and reconstruction of diseased bone tissues, as they exhibit direct bonding with human bone tissues. However, bioactive glasses have low mechanical properties compared to cortical and cancellous bone. On the other hand, composite materials of biodegradable polymers with inorganic bioactive glasses are of particular interest to engineered scaffolds because they often show an excellent balance between strength and toughness and usually improved characteristics compared to their individual components. Composite bioactive glass-polyvinyl alcohol foams for use as scaffolds in tissue engineering were previously developed using the sol-gel route. The goal of this work was the synthesis of composite foams modified with higher amounts of PVA. Samples were characterized by morphological and chemical analysis. The mechanical behavior of the obtained materials was also investigated. The degree of hydrolysis of PVA, concentration of PVA solution and different PVA-bioactive glass composition ratios affect the synthesis procedure. Foams with up to 80 wt% polymer content were obtained. The hybrid scaffolds obtained exhibited macroporous structure with pore size varying from 50 to 600 µm and improved mechanical properties.

scholarly journals Effect of Melt-Derived Bioactive Glass Particles on the Properties of Chitosan Scaffolds

2019 ◽  
Vol 10 (3) ◽  
pp. 38 ◽  
Author(s):  
Hamasa Faqhiri ◽  
Markus Hannula ◽  
Minna Kellomäki ◽  
Maria Teresa Calejo ◽  
Jonathan Massera
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Calcium Phosphate ◽  
Bioactive Glass ◽  
Pore Size ◽  
Glass Content ◽  
Micro Computed Tomography ◽  
Glass Composite ◽  
Composite Scaffolds ◽  
Bioactive Glasses

This study reports on the processing of three-dimensional (3D) chitosan/bioactive glass composite scaffolds. On the one hand, chitosan, as a natural polymer, has suitable properties for tissue engineering applications but lacks bioactivity. On the other hand, bioactive glasses are known to be bioactive and to promote a higher level of bone formation than any other biomaterial type. However, bioactive glasses are hard, brittle, and cannot be shaped easily. Therefore, in the past years, researchers have focused on the processing of new composites. Difficulties in reaching composite materials made of polymer (synthetic or natural) and bioactive glass include: (i) The high glass density, often resulting in glass segregation, and (ii) the fast bioactive glass reaction when exposed to moisture, leading to changes in the glass reactivity and/or change in the polymeric matrix. Samples were prepared with 5, 15, and 30 wt% of bioactive glass S53P4 (BonAlive ®), as confirmed using thermogravimetric analysis. MicrO–Computed tomography and optical microscopy revealed a flaky structure with porosity over 80%. The pore size decreased when increasing the glass content up to 15 wt%, but increased back when the glass content was 30 wt%. Similarly, the mechanical properties (in compression) of the scaffolds increased for glass content up to 15%, but decreased at higher loading. Ions released from the scaffolds were found to lead to precipitation of a calcium phosphate reactive layer at the scaffold surface. This is a first indication of the potential bioactivity of these materials. Overall, chitosan/bioactive glass composite scaffolds were successfully produced with pore size, machinability, and ability to promote a calcium phosphate layer, showing promise for bone tissue engineering and the mechanical properties can justify their use in non-load bearing applications.

scholarly journals A Comparison of Bioactive Glass Scaffolds Fabricated ‎by Robocasting from Powders Made by Sol–Gel and Melt-Quenching Methods

Processes ◽  
2020 ◽  
Vol 8 (5) ◽  
pp. 615
Author(s):  
Basam A. E. Ben-Arfa ◽  
Robert C. Pullar
Keyword(s):  
Mechanical Properties ◽  
Bioactive Glass ◽  
Bone Growth ◽  
Sol Gel ◽  
Glass Network ◽  
Silica Content ◽  
Bioactive Glasses ◽  
Phosphorous Content ◽  
High Silica ◽  
45S5 Bioglass

Bioactive glass scaffolds are used in bone and tissue biomedical implants, and there is great interest in their fabrication by additive manufacturing/3D printing techniques, such as robocasting. Scaffolds need to be macroporous with voids ≥100 m to allow cell growth and vascularization, biocompatible and bioactive, with mechanical properties matching the host tissue (cancellous bone for bone implants), and able to dissolve/resorb over time. Most bioactive glasses are based on silica to form the glass network, with calcium and phosphorous content for new bone growth, and a glass modifier such as sodium, the best known being 45S5 Bioglass®. 45S5 scaffolds were first robocast in 2013 from melt-quenched glass powder. Sol–gel-synthesized bioactive glasses have potential advantages over melt-produced glasses (e.g., greater porosity and bioactivity), but until recently were never robocast as scaffolds, due to inherent problems, until 2019 when high-silica-content sol–gel bioactive glasses (HSSGG) were robocast for the first time. In this review, we look at the sintering, porosity, bioactivity, biocompatibility, and mechanical properties of robocast sol–gel bioactive glass scaffolds and compare them to the reported results for robocast melt-quench-synthesized 45S5 Bioglass® scaffolds. The discussion includes formulation of the printing paste/ink and the effects of variations in scaffold morphology and inorganic additives/dopants.

Hydroxyapatite Formation on Cellular Alumina Coated with Bioactive Glasses

2006 ◽  
Vol 309-311 ◽  
pp. 1027-1030
Author(s):  
Cheol Y. Kim ◽  
Dong Hyun Kim
Keyword(s):  
Compressive Strength ◽  
Bioactive Glass ◽  
Body Fluid ◽  
Bioactive Glasses ◽  
Simulate Body Fluid ◽  
Bioactive Ceramics ◽  
Hydroxyapatite Formation

Various works have been done to produce a cellular form of bioactive ceramics for a scaffold. However, the most of these cellular implants have low compressive strength. In this study, therefore, glass-infiltrated cellular alumina with compressive strength of 7.3MPa was first prepared. Bioactive glass was then coated on the cellular alumina. When the specimen was reacted in simulate body fluid, hydroxyapatite developed on the bioactive glass coat in 18 hours.

A comparative in vivo evaluation of bioactive glasses and bioactive glass-based composites for bone tissue repair

2017 ◽  
Vol 79 ◽  
pp. 286-295 ◽  
Author(s):  
Devis Bellucci ◽  
Alexandre Anesi ◽  
Roberta Salvatori ◽  
Luigi Chiarini ◽  
Valeria Cannillo
Keyword(s):  
Bioactive Glass ◽  
Bone Tissue ◽  
Tissue Repair ◽  
Bioactive Glasses ◽  
In Vivo Evaluation

Bioactive glass–gelatin hybrids: building scaffolds with enhanced calcium incorporation and controlled porosity for bone regeneration

2016 ◽  
Vol 4 (14) ◽  
pp. 2486-2497 ◽  
Author(s):  
Jonathan Lao ◽  
Xavier Dieudonné ◽  
Franck Fayon ◽  
Valérie Montouillout ◽  
Edouard Jallot
Keyword(s):  
Bone Formation ◽  
Bioactive Glass ◽  
Bone Regeneration ◽  
Bioactive Glasses ◽  
Wide Range ◽  
Controlled Porosity

Thanks to their active promotion of bone formation, bioactive glasses (BG) offer unique properties for bone regeneration, but their brittleness prevents them from being used in a wide range of applications.

Sign in / Sign up

Export Citation Format

Share Document