scholarly journals The Tribaloy T-800 Coatings Deposited by Laser Engineered Net Shaping (LENSTM)

Materials ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1366 ◽  
Author(s):  
Durejko ◽  
Łazińska ◽  
Dworecka-Wójcik ◽  
Lipiński ◽  
Varin ◽  
...  
Keyword(s):  
Brittle Fracture ◽  
Thermal Stresses ◽  
High Hardness ◽  
High Sensitivity ◽  
Laves Phase ◽  
Direct Result ◽  
Laser Engineered Net Shaping ◽  
Wide Range ◽  
Net Shaping ◽  
Technological Limitations

A Tribaloy family of alloys (CoMoCrSi) are characterized by a substantial resistance to wear and corrosion within a wide range of temperatures. These properties are a direct result of their microstructure including the presence of Laves phase in varying proportions. Tribaloy T-800 exhibits the highest content of Laves phase of all other commercial Tribaloy alloys, which provides high hardness and wear resistance. On the other hand, a large content of the Laves phase brings about a high sensitivity to brittle fracture of this alloy. The main objective of this work was a development of the Tribaloy T-800 coatings on the Ni-based superalloy substrate (RENE 77), which employs a Laser Engineered Net Shaping (LENSTM) technique. Technological limitations in this process are susceptibility of T-800 to brittle fracture as well as significant thermal stresses due to rapid cooling, which is an inherent attribute of laser techniques. Therefore, in this work, a number of steps that optimized the LENSTM process and improved the metallurgical soundness of coatings are presented. Employing volume and local substrate pre-heating resulted in the formation of high quality coatings devoid of cracks and flaws.

Experimental Study of Machining of Smart Materials Using Submerged Abrasive Waterjet Micromachining Process

2018 ◽  
Author(s):  
Sagil James ◽  
Anurag Mahajan
Keyword(s):  
Experimental Study ◽  
Smart Materials ◽  
Thermal Stresses ◽  
Piezoelectric Materials ◽  
High Hardness ◽  
Machining Process ◽  
Critical Parameters ◽  
Abrasive Waterjet ◽  
Parameter Study ◽  
Wide Range

Smart materials are new generation materials which possess great properties to mend themselves with a change in environment. Smart materials find applications in a wide range of industries including biomedical, aerospace, defense and energy sector and so on. These materials possess unique properties including high hardness, high strength, high melting point and low creep behavior. Manufacturing of these materials is a huge challenge, particularly at the micron scale. Abrasive waterjet micromachining (AWJMM) is a non-traditional material removal process which has the capability of machining extremely hard and brittle materials such as glasses and ceramics. AWJMM process is usually performed with nozzle and workpiece placed in air. However, machining in the air causes spreading of the waterjet resulting in low machining quality. Performing the AWJMM process with a submerged nozzle and workpiece could eliminate this problem and also reduce noise, splash, and airborne debris particles during the machining process. This research investigates Submerged Abrasive Waterjet Machining (SAWJMM) process for micromachining smart ceramic materials. The research involves experimental study on micromachining of smart materials using an in-house fabricated SAWJMM setup. The effect of critical parameters including stand-off distance, abrasive grain size and material properties on the cavity size, kerf angle and MRR during SAWJMM and AWJMM processes are studied. The study found that SAWJMM process is capable of successfully machining smart materials including shape memory alloys and piezoelectric materials at the micron scale. The machined surfaced are free of thermal stresses and did not show any cracking around the edges. The critical process parameter study revealed that stand-off distance and abrasive grit size significantly affect the machining results.

scholarly journals Gold–Carbon Nanocomposites for Environmental Contaminant Sensing

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 719
Author(s):  
Shahrooz Rahmati ◽  
William Doherty ◽  
Arman Amani Babadi ◽  
Muhamad Syamim Akmal Che Mansor ◽  
Nurhidayatullaili Muhd Julkapli ◽  
...  
Keyword(s):  
Environmental Pollutants ◽  
High Sensitivity ◽  
Environmental Crisis ◽  
World Population ◽  
Chemical Contaminants ◽  
Carbon Nanocomposites ◽  
Minimal Sample ◽  
Wide Range ◽  
And Control ◽  
Analytical Tools

The environmental crisis, due to the rapid growth of the world population and globalisation, is a serious concern of this century. Nanoscience and nanotechnology play an important role in addressing a wide range of environmental issues with innovative and successful solutions. Identification and control of emerging chemical contaminants have received substantial interest in recent years. As a result, there is a need for reliable and rapid analytical tools capable of performing sample analysis with high sensitivity, broad selectivity, desired stability, and minimal sample handling for the detection, degradation, and removal of hazardous contaminants. In this review, various gold–carbon nanocomposites-based sensors/biosensors that have been developed thus far are explored. The electrochemical platforms, synthesis, diverse applications, and effective monitoring of environmental pollutants are investigated comparatively.

scholarly journals Pulsed Electromagnetic Cross-Well Exploration for Monitoring Permafrost and Examining the Processes of Its Geocryological Changes

Geosciences ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 60
Author(s):  
Viacheslav Glinskikh ◽  
Oleg Nechaev ◽  
Igor Mikhaylov ◽  
Kirill Danilovskiy ◽  
Vladimir Olenchenko
Keyword(s):  
High Performance ◽  
Geophysical Methods ◽  
Three Dimensional ◽  
High Sensitivity ◽  
Data Interpretation ◽  
Industrial Facilities ◽  
Wide Range ◽  
Vector Finite Element ◽  
A New Technique ◽  
Pulsed Electromagnetic

This paper is dedicated to the topical problem of examining permafrost’s state and the processes of its geocryological changes by means of geophysical methods. To monitor the cryolithozone, we proposed and scientifically substantiated a new technique of pulsed electromagnetic cross-well sounding. Based on the vector finite-element method, we created a mathematical model of the cross-well sounding process with a pulsed source in a three-dimensional spatially heterogeneous medium. A high-performance parallel computing algorithm was developed and verified. Through realistic geoelectric models of permafrost with a talik under a highway, constructed following the results of electrotomography field data interpretation, we numerically simulated the pulsed sounding on the computing resources of the Siberian Supercomputer Center of SB RAS. The simulation results suggest the proposed system of pulsed electromagnetic cross-well monitoring to be characterized by a high sensitivity to the presence and dimensions of the talik. The devised approach can be oriented to addressing a wide range of issues related to monitoring permafrost rocks under civil and industrial facilities, buildings, and constructions.

scholarly journals Overview of Popular Techniques of Raman Spectroscopy and Their Potential in the Study of Plant Tissues

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1537
Author(s):  
Aneta Saletnik ◽  
Bogdan Saletnik ◽  
Czesław Puchalski
Keyword(s):  
Raman Spectroscopy ◽  
Cell Walls ◽  
Structural Changes ◽  
Spatial Information ◽  
Technological Development ◽  
Analytical Techniques ◽  
High Sensitivity ◽  
Plant Tissues ◽  
Wide Range ◽  
Identification Technique

Raman spectroscopy is one of the main analytical techniques used in optical metrology. It is a vibration, marker-free technique that provides insight into the structure and composition of tissues and cells at the molecular level. Raman spectroscopy is an outstanding material identification technique. It provides spatial information of vibrations from complex biological samples which renders it a very accurate tool for the analysis of highly complex plant tissues. Raman spectra can be used as a fingerprint tool for a very wide range of compounds. Raman spectroscopy enables all the polymers that build the cell walls of plants to be tracked simultaneously; it facilitates the analysis of both the molecular composition and the molecular structure of cell walls. Due to its high sensitivity to even minute structural changes, this method is used for comparative tests. The introduction of new and improved Raman techniques by scientists as well as the constant technological development of the apparatus has resulted in an increased importance of Raman spectroscopy in the discovery and defining of tissues and the processes taking place in them.

Measurement of pulmonary edema in intact dogs by transthoracic gamma-ray attenuation

1979 ◽  
Vol 47 (6) ◽  
pp. 1228-1233 ◽  
Author(s):  
D. S. Simon ◽  
J. F. Murray ◽  
N. C. Staub
Keyword(s):  
Pulmonary Edema ◽  
Time Course ◽  
Gamma Ray ◽  
High Sensitivity ◽  
Lung Edema ◽  
Lung Water ◽  
Vascular Congestion ◽  
Isolated Lung ◽  
Wide Range ◽  
Gamma Ray Attenuation

We evaluated the attenuation of the 122 keV gamma ray of cobalt-57 across the thorax of anesthetized dogs as a method for following the time course of lung water changes in acute pulmonary edema induced by either increased microvascular permeability or increased microvascular hydrostatic pressure. The gamma rays traversed the thorax centered on the seventh rib laterally where the lung mass in the beam path was greatest. Calibration measurements in isolated lung lobes demonstrated the high sensitivity and inherent accuracy of the method over a wide range of lung water contents. In control dogs reproducibility averaged +/-3%. Increased permeability edema led to large rapid increases in the transthoracic gamma ray attenuation (TGA), while increased pressure caused an immediate, modest increase in TGA (vascular congestion) followed by a slow further increase over 2 h. There was a fairly good correlation between the increase in extravascular lung water and the change in TGA. The method is simple, safe, and noninvasive and appears to be useful for following the time course of lung water accumulation in generalized lung edema in anesthetized animals.

scholarly journals Measurement and analysis of gas-puff density distributions for plasma radiation source z pinches

2001 ◽  
Vol 19 (4) ◽  
pp. 579-595 ◽  
Author(s):  
D. MOSHER ◽  
B.V. WEBER ◽  
B. MOOSMAN ◽  
R.J. COMMISSO ◽  
P. COLEMAN ◽  
...  
Keyword(s):  
Radiation Source ◽  
Gas Flow ◽  
Initial Density ◽  
High Sensitivity ◽  
Plasma Radiation ◽  
Analysis Techniques ◽  
Density Distributions ◽  
Radiation Properties ◽  
Wide Range ◽  
Measurement And Analysis

High-sensitivity interferometry measurements of initial density distributions are reviewed for a wide range of gas-puff nozzles used in plasma radiation source (PRS) z-pinch experiments. Accurate gas distributions are required for determining experimental load parameters, modeling implosion dynamics, understanding the radiation properties of the stagnated pinch, and for predicting PRS performance in future experiments. For a number of these nozzles, a simple ballistic-gas-flow model (BFM) has been used to provide good physics-based analytic fits to the measured r, z density distributions. These BFM fits provide a convenient means to smoothly interpolate radial density distributions between discrete axial measurement locations for finer-zoned two-dimensional MHD calculations, and can be used to determine how changes in nozzle parameters and load geometry might alter implosion dynamics and radiation performance. These measurement and analysis techniques are demonstrated for a nested-shell nozzle used in Double Eagle and Saturn experiments. For this nozzle, the analysis suggests load modifications that may increase the K-shell yield.

Physical and Technological Limitations of Optical Information Processing and Computing

MRS Bulletin ◽  
1988 ◽  
Vol 13 (8) ◽  
pp. 36-41 ◽  
Author(s):  
Armand R. Tanguay
Keyword(s):  
Information Processing ◽  
Spread Spectrum ◽  
Beam Steering ◽  
Optical Processing ◽  
Robotic Vision ◽  
Wide Range ◽  
Simple Processing ◽  
Technological Barriers ◽  
Processing Architectures ◽  
Technological Limitations

Over the past four decades, the growth of information processing and computational capacity has been truly remarkable, paced to a large extent by equally remarkable progress in the integration and ultra-miniaturization of semiconductor devices. And yet it is becoming increasingly apparent that currently envisioned electronic processors and computers are rapidly approaching technological barriers that delimit processing speed, computational sophistication, and throughput per unit dissipated power. This realization has in turn led to intensive efforts to circumvent such bottlenecks through appropriate advances in processor architecture, multiprocessor distributed tasking, and software-defined algorithms.An alternative strategy that may yield significant computational enhancements for certain broad classes of problems involves the utilization of multidimensional optical components capable of modulating and/or redirecting information-carrying light wave-fronts. Such an optical processing or computing approach relies for its competitive advantage principally on massive parallelism in conjunction with relative ease of implementation of complex (weighted) interconnections among many (perhaps simple) processing elements. A wide range of computational problems exist that lend themselves quite naturally to optical processing architectures, including pattern recognition, earth resources data acquisition and analysis, texture discrimination, synthetic aperture radar (SAR) image formation, radar ambiguity function generation, spread spectrum identification and analysis, systolic array processing, phased array beam steering, and artificial (robotic) vision.

Sign in / Sign up

Export Citation Format

Share Document