scholarly journals Optimization of Maleinized Linseed Oil Loading as a Biobased Compatibilizer in Poly(Butylene Succinate) Composites with Almond Shell Flour

Materials ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 685 ◽  
Author(s):  
Patricia Liminana ◽  
David Garcia-Sanoguera ◽  
Luis Quiles-Carrillo ◽  
Rafael Balart ◽  
Nestor Montanes
Keyword(s):  
Linseed Oil ◽  
Hydroxyl Groups ◽  
Almond Shell ◽  
Butylene Succinate ◽  
Reactive Compatibilization ◽  
Plasticization Effect ◽  
Polymer Filler ◽  
Compatibilizing Effect ◽  
Compatibilizer Agent ◽  
Scanning Electron

Green composites of poly(butylene succinate) (PBS) were manufactured with almond shell flour (ASF) by reactive compatibilization with maleinized linseed oil *MLO) by extrusion and subsequent injection molding. ASF was kept constant at 30 wt %, while the effect of different MLO loading on mechanical, thermal, thermomechanical, and morphology properties was studied. Uncompatibilized PBS/ASF composites show a remarkable decrease in mechanical properties due to the nonexistent polymer‒filler interaction, as evidenced by field emission scanning electron microscopy (FESEM). MLO provides a plasticization effect on PBS/ASF composites but, in addition, acts as a compatibilizer agent since the maleic anhydride groups contained in MLO are likely to react with hydroxyl groups in both PBS end chains and ASF particles. This compatibilizing effect is observed by FESEM with a reduction of the gap between the filler particles and the surrounding PBS matrix. In addition, the Tg of PBS increases from −28 °C to −12 °C with an MLO content of 10 wt %, thus indicating compatibilization. MLO has been validated as an environmentally friendly additive to PBS/ASF composites to give materials with high environmental efficiency.

scholarly journals Effect of Almond Shell Waste on Physicochemical Properties of Polyester-Based Biocomposites

Polymers ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 835 ◽  
Author(s):  
Marina Ramos ◽  
Franco Dominici ◽  
Francesca Luzi ◽  
Alfonso Jiménez ◽  
Maria Carmen Garrigós ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Linseed Oil ◽  
Melt Blending ◽  
Almond Shell ◽  
Scanning Calorimetry ◽  
Shell Waste ◽  
Lignocellulosic Filler ◽  
Shell Powder ◽  
Compatibilizing Effect ◽  
Scanning Electron

Polyester-based biocomposites containing INZEA F2® biopolymer and almond shell powder (ASP) at 10 and 25 wt % contents with and without two different compatibilizers, maleinized linseed oil and Joncryl ADR 4400®, were prepared by melt blending in an extruder, followed by injection molding. The effect of fine (125–250 m) and coarse (500–1000 m) milling sizes of ASP was also evaluated. An improvement in elastic modulus was observed with the addition of< both fine and coarse ASP at 25 wt %. The addition of maleinized linseed oil and Joncryl ADR 4400 produced some compatibilizing effect at low filler contents while biocomposites with a higher amount of ASP still presented some gaps at the interface by field emission scanning electron microscopy. Some decrease in thermal stability was shown which was related to the relatively low thermal stability and disintegration of the lignocellulosic filler. The added modifiers provided some enhanced thermal resistance to the final biocomposites. Thermal analysis by differential scanning calorimetry and thermogravimetric analysis suggested the presence of two different polyesters in the polymer matrix, with one of them showing full disintegration after 28 and 90 days for biocomposites containing 25 and 10 wt %, respectively, under composting conditions. The developed biocomposites have been shown to be potential polyester-based matrices for use as compostable materials at high filler contents.

scholarly journals The Effect of Varying Almond Shell Flour (ASF) Loading in Composites with Poly(Butylene Succinate (PBS) Matrix Compatibilized with Maleinized Linseed Oil (MLO)

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2179 ◽  
Author(s):  
Patricia Liminana ◽  
Luis Quiles-Carrillo ◽  
Teodomiro Boronat ◽  
Rafael Balart ◽  
Nestor Montanes
Keyword(s):  
Mechanical Properties ◽  
Linseed Oil ◽  
Thermomechanical Analysis ◽  
Hydroxyl Groups ◽  
Positive Contribution ◽  
Almond Shell ◽  
Scanning Calorimetry ◽  
Butylene Succinate ◽  
Compatibilization Effect ◽  
Industrial Level

In this work poly(butylene succinate) (PBS) composites with varying loads of almond shell flour (ASF) in the 10–50 wt % were manufactured by extrusion and subsequent injection molding thus showing the feasibility of these combined manufacturing processes for composites up to 50 wt % ASF. A vegetable oil-derived compatibilizer, maleinized linseed oil (MLO), was used in PBS/ASF composites with a constant ASF to MLO (wt/wt) ratio of 10.0:1.5. Mechanical properties of PBS/ASF/MLO composites were obtained by standard tensile, hardness, and impact tests. The morphology of these composites was studied by field emission scanning electron microscopy—FESEM) and the main thermal properties were obtained by differential scanning calorimetry (DSC), dynamical mechanical-thermal analysis (DMTA), thermomechanical analysis (TMA), and thermogravimetry (TGA). As the ASF loading increased, a decrease in maximum tensile strength could be detected due to the presence of ASF filler and a plasticization effect provided by MLO which also provided a compatibilization effect due to the interaction of succinic anhydride polar groups contained in MLO with hydroxyl groups in both PBS (hydroxyl terminal groups) and ASF (hydroxyl groups in cellulose). FESEM study reveals a positive contribution of MLO to embed ASF particles into the PBS matrix, thus leading to balanced mechanical properties. Varying ASF loading on PBS composites represents an environmentally-friendly solution to broaden PBS uses at the industrial level while the use of MLO contributes to overcome or minimize the lack of interaction between the hydrophobic PBS matrix and the highly hydrophilic ASF filler.

scholarly journals Microporous structures in natural polymer

2018 ◽  
Vol 44 ◽  
pp. 00014
Author(s):  
Maciej Borowczak ◽  
Stanisław Frąckowiak
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Surface Structure ◽  
Process Parameters ◽  
Natural Polymer ◽  
Butylene Succinate ◽  
Biodegradable Poly ◽  
Solvent Systems ◽  
Scanning Electron

Electrospinning of biodegradable poly (butylene succinate) has been performed from different solvent systems. Alternation of process parameters resulted in respective changes of the surface structure topography which was evaluated by using scanning electron microscopy (SEM).

Reactive compatibilization of poly(l-lactide)/poly(butylene succinate) blends through polyester maleation: from materials to properties

2014 ◽  
Vol 63 (9) ◽  
pp. 1724-1731 ◽  
Author(s):  
Olivier Persenaire ◽  
Robert Quintana ◽  
Yahia Lemmouchi ◽  
John Sampson ◽  
Stuart Martin ◽  
...  
Keyword(s):  
Butylene Succinate ◽  
Reactive Compatibilization

scholarly journals Triple-Shape Memory Behavior of Modified Lactide/Glycolide Copolymers

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2984
Author(s):  
Anna Smola-Dmochowska ◽  
Natalia Śmigiel-Gac ◽  
Bożena Kaczmarczyk ◽  
Michał Sobota ◽  
Henryk Janeczek ◽  
...  
Keyword(s):  
Glass Transition ◽  
Transition Temperature ◽  
Glass Transition Temperature ◽  
Shape Memory ◽  
Hydroxyl Groups ◽  
Butylene Succinate ◽  
Shape Memory Behavior ◽  
Triple Shape Memory ◽  
High Flexibility ◽  
Bioresorbable Implants

The paper presents the formation and properties of biodegradable thermoplastic blends with triple-shape memory behavior, which were obtained by the blending and extrusion of poly(l-lactide-co-glycolide) and bioresorbable aliphatic oligoesters with side hydroxyl groups: oligo (butylene succinate-co-butylene citrate) and oligo(butylene citrate). Addition of the oligoesters to poly (l-lactide-co-glycolide) reduces the glass transition temperature (Tg) and also increases the flexibility and shape memory behavior of the final blends. Among the tested blends, materials containing less than 20 wt % of oligo (butylene succinate-co-butylene citrate) seem especially promising for biomedical applications as materials for manufacturing bioresorbable implants with high flexibility and relatively good mechanical properties. These blends show compatibility, exhibiting one glass transition temperature and macroscopically uniform physical properties.

scholarly journals Polylactide (PLA) and Its Blends with Poly(butylene succinate) (PBS): A Brief Review

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1193 ◽  
Author(s):  
Shen Su ◽  
Rodion Kopitzky ◽  
Sengül Tolga ◽  
Stephan Kabasci
Keyword(s):  
Material Properties ◽  
Chemical Structure ◽  
Building Blocks ◽  
Processing Parameters ◽  
International Standards ◽  
Butylene Succinate ◽  
Reactive Compatibilization ◽  
Application Potential ◽  
Specific Material

Polylactide (PLA), poly(butylene succinate) (PBS) and blends thereof have been researched in the last two decades due to their commercial availability and the upcoming requirements for using bio-based chemical building blocks. Blends consisting of PLA and PBS offer specific material properties. However, their thermodynamically favored biphasic composition often restricts their applications. Many approaches have been taken to achieve better compatibility for tailored and improved material properties. This review focuses on the modification of PLA/PBS blends in the timeframe from 2007 to early 2019. Firstly, neat polymers of PLA and PBS are introduced in respect of their origin, their chemical structure, thermal and mechanical properties. Secondly, recent studies for improving blend properties are reviewed mainly under the focus of the toughness modification using methods including simple blending, plasticization, reactive compatibilization, and copolymerization. Thirdly, we follow up by reviewing the effect of PBS addition, stereocomplexation, nucleation, and processing parameters on the crystallization of PLA. Next, the biodegradation and disintegration of PLA/PBS blends are summarized regarding the European and International Standards, influencing factors, and degradation mechanisms. Furthermore, the recycling and application potential of the blends are outlined.

Surface Modification of 1-Butyl-3-Methylimidazolium Chloride -Treated Lignocellulosic Materials

2020 ◽  
Vol 1010 ◽  
pp. 526-531
Author(s):  
Asanah Radhi ◽  
Abdullah Othman ◽  
Muhammad Afif Aziz ◽  
Nik Raihan Nik Yusoff
Keyword(s):  
Electron Microscopy ◽  
Surface Modification ◽  
Functional Group ◽  
Hydroxyl Groups ◽  
Lignocellulosic Materials ◽  
X Ray Diffraction ◽  
X Ray ◽  
Hexadecyl Trimethylammonium Bromide ◽  
Thermal Stability Of ◽  
Scanning Electron

Lignocellulosic materials are generally considered hydrophilic due to the high density of hydroxyl groups. The use of lignocellulosic materials in hydrophobic systems thus require surface modification. Therefore, in this study, cellulose (MCC) and sawdust (SD) have been pretreated with ionic liquid, 1-butyl-3-methylimidazolium chloride (BMIMCl) prior to surface modification with cationic surfactant, hexadecyl trimethylammonium bromide (CTAB). The effect of BMIMCl pretreatment prior to surface modification has been investigated. Crystallinity, functional group changes, morphology and thermal stability of the sawdust and cellulose upon BMIMCl pretreatment and surface modification have been studied using x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and thermogravimetric Analysis (TGA). XRD results showed that the structure of lignocellulosic materials became more amorphous upon pretreatment with BMIMCl. FTIR results indicated that the modification of lignocellulosic is more efficient in BMIMCl-pretreated samples. Percentage of decomposition is higher for the BMIMCl-pretreated and CTAB modified samples.

scholarly journals Oil-Based Fungal Pigment from Scytalidium cuboideum as a Textile Dye

2020 ◽  
Vol 6 (2) ◽  
pp. 53
Author(s):  
Mardonio E. Palomino Agurto ◽  
Sarath M. Vega Gutierrez ◽  
R. C. Van Court ◽  
Hsiou-Lien Chen ◽  
Seri C. Robinson
Keyword(s):  
Textile Industry ◽  
Linseed Oil ◽  
Natural Fibers ◽  
Strength Loss ◽  
Textile Dye ◽  
Crystal Formation ◽  
Fabric Surface ◽  
Pigment Film ◽  
Sem Investigation ◽  
Scanning Electron

Identification of effective natural dyes with the potential for low environmental impact has been a recent focus of the textile industry. Pigments derived from spalting fungi have previously shown promise as textile dyes; however, their use has required numerous organic solvents with human health implications. This research explored the possibility of using linseed oil as a carrier for the pigment from Scytalidium cuboideum as a textile dye. Colored linseed oil effectively dyed a range of fabrics, with natural fibers showing better coloration. Scanning electron microscopy (SEM) revealed a pigment film over the fabric surface. While mechanical testing showed no strength loss in treated fabric, colorfastness tests showed significant changes in color in response to laundering and bleach exposure with variable effects across fabric varieties. SEM investigation confirmed differences in pigmented oil layer loss and showed variation in pigment crystal formation between fabric varieties. Heating of the pigmented oil layer was found to result in a bright, shiny fabric surface, which may have potential for naturally weatherproof garments.

Sign in / Sign up

Export Citation Format

Share Document