scholarly journals Toughened Poly(Lactic Acid)—PLA Formulations by Binary Blends with Poly(Butylene Succinate-co-Adipate)—PBSA and Their Shape Memory Behaviour

Materials ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 622 ◽  
Author(s):  
Diego Lascano ◽  
Luis Quiles-Carrillo ◽  
Rafael Balart ◽  
Teodomiro Boronat ◽  
Nestor Montanes
Keyword(s):  
Lactic Acid ◽  
Shape Memory ◽  
Mechanical Performance ◽  
Extrusion Process ◽  
International Standards ◽  
Bending Test ◽  
Poly Lactic Acid ◽  
Scanning Calorimetry ◽  
Butylene Succinate ◽  
Shape Memory Behaviour

This study reports the effect of poly(butylene succinate-co-adipate) (PBSA) on the mechanical performance and shape memory behavior of poly(lactic acid) (PLA) specimens that were manufactured by injection molding and hot-press molding. The poor miscibility between PLA and PBSA was minimized by the addition of an epoxy styrene-acrylic oligomer (ESAO), which was commercially named Joncryl®. It was incorporated during the extrusion process. Tensile, impact strength, and hardness tests were carried out following international standards. PLA/PBSA blends with improved mechanical properties were obtained, which highlighted the sample that was compatibilized with ESAO, leading to a remarkable enhancement in elongation at break, but showing poor shape memory behaviour. Field Emission Scanning Electron Microscopy (FESEM) images showed how the ductile properties were improved, while PBSA loading increased, thus leading to minimizing the brittleness of neat PLA. The differential scanning calorimetry (DSC) analysis revealed the low miscibility between these two polymers and the improving effect of PBSA in PLA crystallization. The bending test carried out on the sheets of PLA/PBSA blends showed the direct influence that the PBSA has on the reduction of the shape memory that is intrinsically offered by neat PLA.

scholarly journals Hybrid Biocomposites Based on Poly(Lactic Acid) and Silica Aerogel for Food Packaging Applications

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4910 ◽  
Author(s):  
Alejandro Aragón-Gutierrez ◽  
Marina P. Arrieta ◽  
Mar López-González ◽  
Marta Fernández-García ◽  
Daniel López
Keyword(s):  
Thermal Stability ◽  
Lactic Acid ◽  
Silica Aerogel ◽  
Food Packaging ◽  
Mechanical Performance ◽  
Composite Films ◽  
Barrier Properties ◽  
Extrusion Process ◽  
Poly Lactic Acid ◽  
Barrier Performance

Bionanocomposites based on poly (lactic acid) (PLA) and silica aerogel (SiA) were developed by means of melt extrusion process. PLA-SiA composite films were plasticized with 15 wt.% of acetyl (tributyl citrate) (ATBC) to facilitate the PLA processability as well as to attain flexible polymeric formulations for films for food packaging purposes. Meanwhile, SiA was added in four different proportions (0.5, 1, 3 and 5 wt.%) to evaluate the ability of SiA to improve the thermal, mechanical, and barrier performance of the bionanocomposites. The mechanical performance, thermal stability as well as the barrier properties against different gases (carbon dioxide, nitrogen, and oxygen) of the bionanocomposites were evaluated. It was observed that the addition of 3 wt.% of SiA to the plasticized PLA-ATBC matrix showed simultaneously an improvement on the thermal stability as well as the mechanical and barrier performance of films. Finally, PLA-SiA film formulations were disintegrated in compost at the lab-scale level. The combination of ATBC and SiA sped up the disintegration of PLA matrix. Thus, the bionanocomposites produced here show great potential as sustainable polymeric formulations with interest in the food packaging sector.

scholarly journals The effect of beta-tricalcium phosphate on mechanical and thermal performances of poly(lactic acid)

2016 ◽  
Vol 50 (30) ◽  
pp. 4189-4198 ◽  
Author(s):  
JM Ferri ◽  
I Gisbert ◽  
D García-Sanoguera ◽  
MJ Reig ◽  
R Balart
Keyword(s):  
Thermal Analysis ◽  
Lactic Acid ◽  
Tricalcium Phosphate ◽  
Mechanical Performance ◽  
Poly Lactic Acid ◽  
Mechanical Resistance ◽  
Dynamical Response ◽  
Scanning Calorimetry ◽  
Base Materials ◽  
Beta Tricalcium Phosphate

Orthophosphates are bioactive crystals with similar structure, in terms of elemental composition and crystal nature, to human bone. In this work, biocomposite materials were prepared with poly(lactic acid) (PLA) as matrix, and beta-tricalcium phosphate (β-TCP) as osteoconductive filler by extrusion-compounding followed by conventional injection molding. The β-TCP load content was varied in the 10–40 wt% range and the influence of the β-TCP load on mechanical performance of PLA/β-TCP composites was evaluated. Mechanical properties of composites were obtained by standardized tensile, flexural, impact, and hardness tests. Thermal analysis of composites was carried out by means of differential scanning calorimetry; degradation at high temperatures was studied by thermogravimetric analysis; and the effect of the β-TCP load on dynamical response of composites was studied by mechanical thermal analysis in torsion mode. The best-balanced properties were obtained for PLA composites containing 30 wt% β-TCP with a remarkable increase in the Young’s modulus. These materials offer interesting properties to be used as base materials for medical applications such as interference screws due to high stiffness and mechanical resistance.

Effect of low nanoclay content on the physico-mechanical properties of poly(lactic acid) nanocomposites

2018 ◽  
Vol 27 (2) ◽  
pp. 43-54 ◽  
Author(s):  
JR Robledo-Ortíz ◽  
AS Martín del Campo ◽  
EJ López-Naranjo ◽  
M Arellano ◽  
CF Jasso-Gastinel ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Impact Strength ◽  
Flexural Strength ◽  
Mechanical Performance ◽  
Flexural Modulus ◽  
Poly Lactic Acid ◽  
Scanning Calorimetry ◽  
Degradation Temperature ◽  
Nanoclay Content ◽  
The Impact

In this work, three different nanoclays (1.44P, 1.34MN, and Cloisite 15A) were used to reinforce an injection grade poly(lactic acid) (PLA). The nanocomposites (NCs) were prepared using three different nanoclay concentration levels (1, 3, and 5 wt%) in a twin-screw extruder. To evaluate their mechanical performance (static and dynamic tests) and thermal properties, the respective samples were obtained by injection molding. Results showed that the three nanoclays significantly increased the tensile and flexural modulus of the injection grade PLA. The 1.34MN NCs also showed improvement in the tensile strength. An increment in flexural strength was obtained with 1.34MN and 1.44P nanoclays, while with nanoclay 15A, the flexural strength decreased. Additionally, the use of 5 wt% of 1.44P nanoclay allowed an increase in impact strength while using 1.34MN and 15A nanoclays, the impact strength was similar to the one observed for pure PLA. In general, mechanodynamic analysis results showed that storage modulus increased with nanoclay content; while thermogravimetric analysis indicated that none of the nanoclays has a significant effect over the degradation temperature of pure PLA. Differential scanning calorimetry results showed that the crystallinity of PLA is enhanced with nanoclay inclusion. For 1.34MN NCs, X-ray diffraction observations exposed that the mineral clay relative intensity peaks disappeared indicating nanoclay exfoliation, which contributes to the increase in tensile and flexural strength in the NCs. Nevertheless for 1.44P and 15A nanoclays, an increase in the interlayer distance (intercalation) was detected.

scholarly journals High-Toughness Poly(lactic Acid)/Starch Blends Prepared through Reactive Blending Plasticization and Compatibilization

Molecules ◽  
2020 ◽  
Vol 25 (24) ◽  
pp. 5951
Author(s):  
Huan Hu ◽  
Ang Xu ◽  
Dianfeng Zhang ◽  
Weiyi Zhou ◽  
Shaoxian Peng ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Performance Test ◽  
Mechanical Performance ◽  
Raw Materials ◽  
Amorphous Region ◽  
Poly Lactic Acid ◽  
Esterification Reaction ◽  
Melt Blending ◽  
Scanning Calorimetry ◽  
Starch Blends

In this study, poly(lactic acid) (PLA)/starch blends were prepared through reactive melt blending by using PLA and starch as raw materials and vegetable oil polyols, polyethylene glycol (PEG), and citric acid (CA) as additives. The effects of CA and PEG on the toughness of PLA/starch blends were analyzed using a mechanical performance test, scanning electron microscope analysis, differential scanning calorimetry, Fourier-transform infrared spectroscopy, X-ray diffraction, rheological analysis, and hydrophilicity test. Results showed that the elongation at break and impact strength of the PLA/premixed starch (PSt)/PEG/CA blend were 140.51% and 3.56 kJ·m−2, which were 13.4 and 1.8 times higher than those of pure PLA, respectively. The essence of the improvement in the toughness of the PLA/PSt/PEG/CA blend was the esterification reaction among CA, PEG, and starch. During the melt-blending process, the CA with abundant carboxyl groups reacted in the amorphous region of the starch. The shape and crystal form of the starch did not change, but the surface activity of the starch improved and consequently increased the adhesion between starch and PLA. As a plasticizer for PLA and starch, PEG effectively enhanced the mobility of the molecular chains. After PEG was dispersed, it participated in the esterification reaction of CA and starch at the interface and formed a branched/crosslinked copolymer that was embedded in the interface of PLA and starch. This copolymer further improved the compatibility of the PLA/starch blends. PEGs with small molecules and CA were used as compatibilizers to reduce the effect on PLA biodegradability. The esterification reaction on the starch surface improved the compatibilization and toughness of the PLA/starch blend materials and broadens their application prospects in the fields of medicine and high-fill packaging.

scholarly journals Binary Green Blends of Poly(lactic acid) with Poly(butylene adipate-co-butylene terephthalate) and Poly(butylene succinate-co-butylene adipate) and Their Nanocomposites

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2489
Author(s):  
Serena Coiai ◽  
Maria Laura Di Lorenzo ◽  
Patrizia Cinelli ◽  
Maria Cristina Righetti ◽  
Elisa Passaglia
Keyword(s):  
Lactic Acid ◽  
Mechanical Performance ◽  
Impact Resistance ◽  
Barrier Properties ◽  
Morphological Properties ◽  
Poly Lactic Acid ◽  
Butylene Succinate ◽  
Butylene Terephthalate ◽  
Green Materials ◽  
The Impact

Poly(lactic acid) (PLA) is the most widely produced biobased, biodegradable and biocompatible polyester. Despite many of its properties are similar to those of common petroleum-based polymers, some drawbacks limit its utilization, especially high brittleness and low toughness. To overcome these problems and improve the ductility and the impact resistance, PLA is often blended with other biobased and biodegradable polymers. For this purpose, poly(butylene adipate-co-butylene terephthalate) (PBAT) and poly(butylene succinate-co-butylene adipate) (PBSA) are very advantageous copolymers, because their toughness and elongation at break are complementary to those of PLA. Similar to PLA, both these copolymers are biodegradable and can be produced from annual renewable resources. This literature review aims to collect results on the mechanical, thermal and morphological properties of PLA/PBAT and PLA/PBSA blends, as binary blends with and without addition of coupling agents. The effect of different compatibilizers on the PLA/PBAT and PLA/PBSA blends properties is here elucidated, to highlight how the PLA toughness and ductility can be improved and tuned by using appropriate additives. In addition, the incorporation of solid nanoparticles to the PLA/PBAT and PLA/PBSA blends is discussed in detail, to demonstrate how the nanofillers can act as morphology stabilizers, and so improve the properties of these PLA-based formulations, especially mechanical performance, thermal stability and gas/vapor barrier properties. Key points about the biodegradation of the blends and the nanocomposites are presented, together with current applications of these novel green materials.

scholarly journals Improving Mechanical Properties for Extrusion-Based Additive Manufacturing of Poly(Lactic Acid) by Annealing and Blending with Poly(3-Hydroxybutyrate)

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1529 ◽  
Author(s):  
Sisi Wang ◽  
Lode Daelemans ◽  
Rudinei Fiorio ◽  
Maling Gou ◽  
Dagmar R. D’hooge ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Additive Manufacturing ◽  
Mechanical Performance ◽  
Softening Temperature ◽  
Xrd Analysis ◽  
Sem Analysis ◽  
Poly Lactic Acid ◽  
Second Phase ◽  
X Ray Diffraction ◽  
Scanning Calorimetry

Based on differential scanning calorimetry (DSC), X-ray diffraction (XRD) analysis, polarizing microscope (POM), and scanning electron microscopy (SEM) analysis, strategies to close the gap on applying conventional processing optimizations for the field of 3D printing and to specifically increase the mechanical performance of extrusion-based additive manufacturing of poly(lactic acid) (PLA) filaments by annealing and/or blending with poly(3-hydroxybutyrate) (PHB) were reported. For filament printing at 210 °C, the PLA crystallinity increased significantly upon annealing. Specifically, for 2 h of annealing at 100 °C, the fracture surface became sufficiently coarse such that the PLA notched impact strength increased significantly (15 kJ m−2). The Vicat softening temperature (VST) increased to 160 °C, starting from an annealing time of 0.5 h. Similar increases in VST were obtained by blending with PHB (20 wt.%) at a lower printing temperature of 190 °C due to crystallization control. For the blend, the strain at break increased due to the presence of a second phase, with annealing only relevant for enhancing the modulus.

scholarly journals Improving the Toughness and Thermal Resistance of Polyoxymethylene/Poly(lactic acid) Blends: Evaluation of Structure–Properties Correlation for Reactive Processing

Polymers ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 307 ◽  
Author(s):  
Jacek Andrzejewski ◽  
Katarzyna Skórczewska ◽  
Arkadiusz Kloziński
Keyword(s):  
Lactic Acid ◽  
Thermal Resistance ◽  
High Efficiency ◽  
Mechanical Performance ◽  
Softening Temperature ◽  
Thermomechanical Properties ◽  
Poly Lactic Acid ◽  
Reactive Processing ◽  
Scanning Calorimetry ◽  
The Impact

The study focuses on the development of polyoxymethylene (POM)/poly(lactic acid) (PLA) blends with increased impact and thermal resistance. The study was conducted in two phases; in the first part, a series of unmodified blends with PLA content of 25, 50, and 75 wt.% was prepared, while the second part focused on the modification of the PLA/POM (50/50) blends. An ethylene/butyl acrylate/glycidyl methacrylate terpolymer (E/BA/GMA) elastomer (EBA) was used to improve the impact strength of the prepared blends, while reactive blending was used to improve interfacial interactions. We used a multifunctional epoxy chain extender (CE) as the compatibilizer. Static tensile tests and notched Izod measurement were used to evaluate the mechanical performance of the prepared samples. The thermomechanical properties were investigated using dynamic mechanical thermal analysis (DMTA) analysis and heat deflection temperature (HDT)/Vicat softening temperature (VST) methods. The crystallinity was measured using differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXS) measurements, while the rheology was evaluated using a rotational rheometer. The paper also includes a structure analysis performed using the SEM method. The structural tests show partial miscibility of the POM/PLA systems, resulting in the perfect compatibility of both phases. The impact properties of the final blends modified by the EBA/CE system were found to be similar to pure POM resin, while the E modulus was visibly improved. Favorable changes were also noticeable in the case of the thermomechanical properties. The results of most of the conducted measurements and microscopic observations confirm the high efficiency of the reaction for PLA as well as for the modified POM/PLA mixtures.

scholarly journals Preparation, Mechanical, and Thermal Properties of Biodegradable Polyesters/Poly(Lactic Acid) Blends

2010 ◽  
Vol 2010 ◽  
pp. 1-8 ◽  
Author(s):  
Peng Zhao ◽  
Wanqiang Liu ◽  
Qingsheng Wu ◽  
Jie Ren
Keyword(s):  
Lactic Acid ◽  
Gel Permeation Chromatography ◽  
Poly Lactic Acid ◽  
Mechanical And Thermal Properties ◽  
Scanning Calorimetry ◽  
Butylene Succinate ◽  
Biodegradable Polyesters ◽  
H Nmr ◽  
Melt Polycondensation ◽  
Twin Screw

Series of biodegradable polyesters poly(butylene adipate) (PBA), poly(butylene succinate) (PBS), and poly(butylene adipate-co-butylene terephthalate) (PBAT) were synthesized successfully by melt polycondensation. The polyesters were characterized by Fourier transform infrared spectroscopy (FTIR),1H-NMR, differential scanning calorimetry (DSC), and gel permeation chromatography (GPC), respectively. The blends of poly(lactic acid) (PLA) and biodegradable polyester were prepared using a twin screw extruder. PBAT, PBS, or PBA can be homogenously dispersed in PLA matrix at a low content (5–20 wt%), yielding the blends with much higher elongation at break than homo-PLA. DSC analysis shows that the isothermal and nonisothermal crystallizabilities of PLA component are promoted in the presence of a small amount of PBAT.

scholarly journals Poly (Lactic Acid)/Thermoplastic Starch Films: Effect of Cardoon Seed Epoxidized Oil on Their Chemicophysical, Mechanical, and Barrier Properties

Coatings ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 574 ◽  
Author(s):  
Rosa Turco ◽  
Rodrigo Ortega-Toro ◽  
Riccardo Tesser ◽  
Salvatore Mallardo ◽  
Sofia Collazo-Bigliardi ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Thermoplastic Starch ◽  
Extrusion Process ◽  
Light Transmittance ◽  
Poly Lactic Acid ◽  
Vapor Permeability ◽  
Physical Interaction ◽  
Scanning Calorimetry

In this work, biodegradable films based on poly (lactic acid) (PLA) and corn thermoplastic starch (TPS), additivated with epoxidized cardoon oil plasticizer (ECO) at 3% by weight with respect to PLA mass fraction, were prepared by melt extrusion process and compression molding. The effect of ECO on structural, thermal, mechanical, barrier, and spectral optical properties of the films was investigated. Spectroscopic analysis evidenced the development of physical interaction between oil and polymers, mainly PLA. In addition, no oil migration occurrence was detected after six months of film preparation, as evidenced by oil mass evaluation by precipitation as well as by 1H-NMR methods, thus highlighting the good inclusion of oil inside the polymeric network. The plasticizing action of the oil induced a lean improvement of the interfacial adhesion between hydrophobic PLA and hydrophilic TPS, particularly accentuated in PLA80_ECO composition, as evidenced by morphological analysis of blend fracture surfaces. TGA data underlined that, differently from TPS-based films, PLA-based systems followed one degradative thermal profile suggesting a slight compatibilization effect of epoxidized oil in these films. The shifting of Tg values, by differential scanning calorimetry (DSC) analysis, indicated a weak miscibility at molecular level. Generally, in the investigated blends, the phase separation between PLA and TPS polymers was responsible for the mechanical properties failing; in particular, the tensile strength evidenced a negative deviation from the rule of mixtures, particularly marked in TPS-based blends, where no physical entanglements occurred between the polymers since their immiscibility even in presence of ECO. The epoxidized oil strongly improved the barrier properties (water vapor permeability (WVP) and oxygen permeability (O2P)) of all the films, likely developing a physical barrier to water and oxygen diffusion and solubilization. With respect to neat PLA, PL80 and PL80_ECO films evidenced the improvement of surface wettability, due to the presence of polar groups both in TPS (hydroxyl residues) and in epoxidized oil (oxirane rings). Finally, following to the conditioning in climatic chamber at T = 25 °C and RH = 50%, PLA80 film became opaque due to TPS water absorption, causing a light transmittance decreasing, as evidenced by spectral optical analysis.

Effect of Polyethylene Glycol in Nanocellulose/PLA Composites

2019 ◽  
Vol 821 ◽  
pp. 89-95
Author(s):  
Wanasorn Somphol ◽  
Thipjak Na Lampang ◽  
Paweena Prapainainar ◽  
Pongdhorn Sae-Oui ◽  
Surapich Loykulnant ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Lactic Acid ◽  
Polyethylene Glycol ◽  
Aspect Ratio ◽  
Mechanical Performance ◽  
Tensile Modulus ◽  
Poly Lactic Acid ◽  
Solvent Casting ◽  
Casting Method ◽  
Mediated Oxidation

Poly (lactic acid) or PLA was reinforced by nanocellulose and polyethylene glycol (PEG), which were introduced into PLA matrix from 0 to 3 wt.% to enhance compatibility and strength of the PLA. The nanocellulose was prepared by TEMPO-mediated oxidation from microcrystalline cellulose (MCC) powder and characterized by TEM, AFM, and XRD to reveal rod-like shaped nanocellulose with nanosized dimensions, high aspect ratio and high crystallinity. Films of nanocellulose/PEG/PLA nanocomposites were prepared by solvent casting method to evaluate the mechanical performance. It was found that the addition of PEG in nanocellulose-containing PLA films resulted in an increase in tensile modulus with only 1 wt% of PEG, where higher PEG concentrations negatively impacted the tensile strength. Furthermore, the tensile strength and modulus of nanocellulose/PEG/PLA nanocomposites were higher than the PLA/PEG composites due to the existence of nanocellulose chains. Visual traces of crazing were detailed to describe the deformation mechanism.

Sign in / Sign up

Export Citation Format

Share Document