scholarly journals Effect of Fibers on High-Temperature Mechanical Behavior and Microstructure of Reactive Powder Concrete

Materials ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 329 ◽  
Author(s):  
Muhammad Abid ◽  
Xiaomeng Hou ◽  
Wenzhong Zheng ◽  
Raja Hussain
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
High Temperature ◽  
Reactive Powder Concrete ◽  
Peak Strain ◽  
Fiber Reinforced ◽  
Split Tensile Strength ◽  
X Ray ◽  
Reactive Powder

This study was aimed to investigate the effect of steel, polypropylene (PP), and hybrid (steel + PP) fibers on high-temperature mechanical properties of reactive powder concrete (RPC). The mechanical properties considered are cubic compressive strength, axial or prismatic compressive strength, split-tensile strength, flexural strength, elastic modulus, peak strain, and stress-strain behavior. The strength recession due to high temperature was investigated at micro level by scanning electron microscope, energy dispersive X-ray spectroscopy, X-ray diffraction, mercury intrusion porosity, thermogravimetric, and differential scanning calorimetry analyses. The high-temperature tests were carried out at target temperatures of 120, 300, 500, 700, and 900 °C. The hot-state compressive strength of RPC started to decrease at 120 °C; however, a partial recovery at 300 °C and a gradual decrease above 300 °C were observed. The degradation of split-tensile strength, flexural strength, and elastic modulus were gradual with increasing temperature despite the effect of different fibers. Whereas, the peak strain was gradually increasing up to 700 °C. However, after 700 °C, it remained unchanged. Steel fiber reinforced RPC (SRPC) and hybrid fiber reinforced RPC (HRPC) showed a ductile behavior. PP fiber reinforced RPC (PRPC) showed a quite brittle behavior up to 300 °C; however, further heating made the microstructure porous and it became ductile too. Overall the performance of SRPC and HRPC were superior to PRPC because of higher modulus of elasticity, higher strength, and better fire resistance of steel fibers. Fiber reinforced RPC was found to have better fire resistance than traditional types of concrete based on comparative studies with the provisions of design codes and earlier research. The constitutive equations developed can be utilized in computer programs for structural design of RPC structures exposed to fire.

Tensile Properties of Steel Fiber-Reinforced Reactive Powder Concrete after High Temperature

2011 ◽  
Vol 413 ◽  
pp. 270-276 ◽  
Author(s):  
Wen Zhong Zheng ◽  
Hai Yan Li ◽  
Ying Wang ◽  
Heng Yan Xie
Keyword(s):  
Tensile Strength ◽  
High Temperature ◽  
Steel Fiber ◽  
Heating Temperature ◽  
Fiber Content ◽  
Reactive Powder Concrete ◽  
Fiber Reinforced ◽  
Critical Temperatures ◽  
Reactive Powder ◽  
The Relationship

87 prismatic flexural steel fiber-reinforced reactive powder concrete (RPC) specimens with the size of 40mm×40mm×160mm were tested as well as 87 dumbbell-shaped axis tensile RPC specimens after being exposed to different high temperatures. The effect of steel fiber content and heating temperature on the flexural and tensile strength of steel fiber-reinforced RPC was analyzed. With the steel fiber content increasing, the flexural and tensile strength of steel fiber-reinforced RPC after high temperature improve significantly, and they increase first and then decrease with the heating temperature elevated, and the critical temperatures are 200¡æ and 120¡æ, respectively. Equations are established to express the relationship between the flexural and tensile strength of steel fiber-reinforced RPC and the heating temperature. The theoretical curves are in good agreement with the test data.

Experimental Study on Mechanical Properties of Synthetic Macro-Fiber Reinforced Reactive Powder Concrete

2014 ◽  
Vol 496-500 ◽  
pp. 2402-2406
Author(s):  
Kui He ◽  
Hui Yang ◽  
Fang Fang Jia ◽  
Er Po Wang ◽  
Zhen Bao Lu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Compressive Strength ◽  
Fracture Mechanics ◽  
Flexural Strength ◽  
Fracture Energy ◽  
Ductile Fracture ◽  
Reactive Powder Concrete ◽  
Fiber Reinforced ◽  
Reactive Powder

Workability, strength and fracture mechanics of polypropylene macro-fiber reinforced Reactive powder concrete (RPC) were studied in this work. The results showed that the incorporation of macro-fiber could influence the workability of RPC, the slump of RPC decreased with the increasing of macro-fiber content; compressive strength decreased while splitting strength increased with the increasing of macro-fiber, meanwhile the flexural strength invariant. Macro-fiber could strongly enhance the flexural toughness of RPC and changed the failure mode from brittle to ductile; fracture energy tends to increase linearly with the increasing of macro-fiber.

scholarly journals Experimental Behaviour of Fiber Reinforced Reactive Powder Concrete

2019 ◽  
Vol 9 (1S3) ◽  
pp. 454-459 ◽  
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Polypropylene Fiber ◽  
Chloride Diffusion ◽  
Sisal Fiber ◽  
Reactive Powder Concrete ◽  
Coir Fiber ◽  
Split Tensile Strength ◽  
Reactive Powder

In this paper various mix proportions of Reactive Powder Concretes were formulated using ordinary Portland cement, Fly ash, Micro silica, Silica Fume, Quartz powder etc and these concretes were subjected to strength test. The best mix was selected for further in depth study with fibers like Sisal fiber, Coir fiber, Hair fiber and Polypropylene fiber mixed Reactive Powder Concrete and the various tests have been performed Cube Compressive strength, Cylinder Compressive strength, Flexural strength, Split Tensile strength, Shear test, Water absorption, Sorptivity and Chloride diffusion etc. As a result, fiber incorporated concrete shows increasing Flexural strength, splitting tensile strength, and shear strength up to 30% as compared to control RPC and gives minimal decrease in compressive strength by the addition of fibers. These characteristics make it as a promising material for casting non structural elements such as pressure pipes, flooring tiles, Partition panels, door and window frames. It can also be used as repair materials.

scholarly journals Experimental Investigation on Mechanical Properties of Hybrid Fiber Reinforced Quaternary Cement Concrete

2015 ◽  
Vol 10 (4) ◽  
pp. 155892501501000
Author(s):  
Ramesh Kanagavel ◽  
K. Arunachalam
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Impact Resistance ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Cement Concrete ◽  
Split Tensile Strength ◽  
Polypropylene Fiber Reinforced Concrete

Mechanical properties of quaternary blending cement concrete reinforced with hybrid fibers are evaluated in this experimental study. The steel fibers were added at volume fractions of 0.5%, 1%, and 1.5 % and polypropylene fibers were added at 0.25% and 0.5% by weight of cementitious materials in the concrete mix individually and in hybrid form to determine the compressive strength, split tensile strength, flexural strength and impact resistance for all the mixes. The experimental results revealed that fiber addition improves the mechanical properties and also the ductility and energy absorption of the concrete. The results also demonstrate that the hybrid steel – polypropylene fiber reinforced concrete performs better in compressive strength, split tensile strength, flexural strength and impact resistance than mono steel and mono polypropylene fiber reinforced concrete.

scholarly journals Experimental Investigation on Mechanical Properties of Hybrid Fiber Reinforced Quaternary Cement Concrete

2016 ◽  
Vol 11 (3) ◽  
pp. 155892501601100 ◽  
Author(s):  
Ramesh Kanagavel ◽  
K. Arunachalam
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Impact Resistance ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Cement Concrete ◽  
Split Tensile Strength ◽  
Polypropylene Fiber Reinforced Concrete

Mechanical properties of quaternary blending cement concrete reinforced with hybrid fibers are evaluated in this experimental study. The steel fibers were added at volume fractions of 0.5%, 1%, and 1.5 % and polypropylene fibers were added at 0.25% and 0.5% by weight of cementitious materials in the concrete mix individually and in hybrid form to determine the compressive strength, split tensile strength, flexural strength and impact resistance for all the mixes. The experimental results revealed that fiber addition improves the mechanical properties and also the ductility and energy absorption of the concrete. The results also demonstrate that the hybrid steel – polypropylene fiber reinforced concrete performs better in compressive strength, split tensile strength, flexural strength and impact resistance than mono steel and mono polypropylene fiber reinforced concrete.

scholarly journals An Experimental Model on the Mechanical Properties of Reactive Powder Concrete by using Cement Replacement of Glass Powder

2019 ◽  
Vol 8 (9S3) ◽  
pp. 398-402
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Glass Powder ◽  
Fine Sand ◽  
Reactive Powder Concrete ◽  
Building Structures ◽  
Split Tensile Strength ◽  
Super Plasticizer ◽  
Advance Material ◽  
Reactive Powder

Reactive Powder Concrete is a creating composite material that enables the solid business to advance material utilizes Generate financial advantages and building structures which are solid, strong and delicate to condition. RPC is another ultra-elite cement with extensive variety of capacities. RPC was created in the 1990s by Bouygues' research center in France. RPC speaks to another class of Portland concrete based material with compressive qualities of 120-200 MPa go. By presenting fine steel filaments. It has no coarse materials and contains little steel filaments that give extra strength. RPC incorporate Portland concrete, silica rage, fine sand, super plasticizer, water and steel strands. In this investigation, RPC by utilizing cement substitution of glass powder up to 30%. Likewise mechanical properties, compressive strength and split tensile strength were considered.

scholarly journals Effect of Steel Fibers and Temperature on the Mechanical Properties of Reactive Powder Concrete

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Mahmoud Ahmed Ali Abdelrahim ◽  
Aboelwafa Elthakeb ◽  
Usama Mohamed ◽  
Mohamed Taha Noaman
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Elevated Temperatures ◽  
Fine Sand ◽  
Splitting Tensile Strength ◽  
Steel Fibers ◽  
Reactive Powder Concrete ◽  
Strain Relationship ◽  
Reactive Powder

Abstract Reactive Powder Concrete (RPC) is a concrete of the modern generation it mainly contains a high percentage of cement and a small percentage of water For cement as well as the presence of fine sand, ground quartz and silica dust. This research aims Studying the behavior and mechanical characteristics of RPC exposed to elevated temperatures. The key variables in this study are steel fibers content and the high temperatures of different levels 25, 200, 300, 400 ºC. Mechanical properties of concrete behavior including compressive strength, splitting tensile strength, stress-strain relationship (modulus of elasticity), and flexural strength. The test findings indicated that the Output strength of RPC specimens decreased when the high temperature increases. At a temperature of 400 °C, all samples lost the compressive strength and splitting tensile strength.

Sign in / Sign up

Export Citation Format

Share Document