scholarly journals Interference Alignment for Cognitive Radio Communications and Networks: A Survey

2019 ◽  
Vol 8 (4) ◽  
pp. 50 ◽  
Author(s):  
Yusuf Abdulkadir ◽  
Oluyomi Simpson ◽  
Yichuang Sun
Keyword(s):  
Cognitive Radio ◽  
Frequency Spectrum ◽  
Degrees Of Freedom ◽  
Signal To Noise Ratio ◽  
Interference Alignment ◽  
Radio Spectrum ◽  
High Signal ◽  
Radio Communications ◽  
Main Research ◽  
Transmission Strategy

Interference alignment (IA) is an innovative wireless transmission strategy that has shown to be a promising technique for achieving optimal capacity scaling of a multiuser interference channel at asymptotically high-signal-to-noise ratio (SNR). Transmitters exploit the availability of multiple signaling dimensions in order to align their mutual interference at the receivers. Most of the research has focused on developing algorithms for determining alignment solutions as well as proving interference alignment’s theoretical ability to achieve the maximum degrees of freedom in a wireless network. Cognitive radio, on the other hand, is a technique used to improve the utilization of the radio spectrum by opportunistically sensing and accessing unused licensed frequency spectrum, without causing harmful interference to the licensed users. With the increased deployment of wireless services, the possibility of detecting unused frequency spectrum becomes diminished. Thus, the concept of introducing interference alignment in cognitive radio has become a very attractive proposition. This paper provides a survey of the implementation of IA in cognitive radio under the main research paradigms, along with a summary and analysis of results under each system model.

scholarly journals Cognitive Interference Alignment Schemes for IoT Oriented Heterogeneous Two-Tier Networks

Sensors ◽  
2018 ◽  
Vol 18 (8) ◽  
pp. 2548 ◽  
Author(s):  
Run Tian ◽  
Lin Ma ◽  
Zhe Wang ◽  
Xuezhi Tan
Keyword(s):  
Spectrum Sharing ◽  
Network Performance ◽  
Signal To Noise Ratio ◽  
Interference Management ◽  
Interference Alignment ◽  
Network Capacity ◽  
High Signal ◽  
Noise Power ◽  
Optimal Capacity ◽  
Iot Devices

This paper considers interference management and capacity improvement for Internet of Things (IoT) oriented two-tier networks by exploiting cognition between network tiers with interference alignment (IA). More specifically, we target our efforts on the next generation two-tier networks, where a tier of femtocell serving multiple IoT devices shares the licensed spectrum with a tier of pre-existing macrocell via a cognitive radio. Aiming to manage the cross-tier interference caused by cognitive spectrum sharing as well as ensure an optimal capacity of the femtocell, two novel self-organizing cognitive IA schemes are proposed. First, we propose an interference nulling based cognitive IA scheme. In such a scheme, both co-tier and cross-tier interferences are aligned into the orthogonal subspace at each IoT receiver, which means all the interference can be perfectly eliminated without causing any performance degradation on the macrocell. However, it is known that the interference nulling based IA algorithm achieves its optimum only in high signal to noise ratio (SNR) scenarios, where the noise power is negligible. Consequently, when the imposed interference-free constraint on the femtocell can be relaxed, we also present a partial cognitive IA scheme that further enhances the network performance under a low and intermediate SNR. Additionally, the feasibility conditions and capacity analyses of the proposed schemes are provided. Both theoretical and numerical results demonstrate that the proposed cognitive IA schemes outperform the traditional orthogonal precoding methods in terms of network capacity, while preserving for macrocell users the desired quality of service.

scholarly journals Cooperative Spectrum Sensing Based on Multi-Features Combination Network in Cognitive Radio Network

Entropy ◽  
2022 ◽  
Vol 24 (1) ◽  
pp. 129
Author(s):  
Mingdong Xu ◽  
Zhendong Yin ◽  
Yanlong Zhao ◽  
Zhilu Wu
Keyword(s):  
Cognitive Radio ◽  
Spectrum Sensing ◽  
Cognitive Radio Network ◽  
Cooperative Spectrum Sensing ◽  
Signal To Noise Ratio ◽  
Primary User ◽  
Radio Spectrum ◽  
Local Information ◽  
Channel State ◽  
Single Node

cognitive radio, as a key technology to improve the utilization of radio spectrum, acquired much attention. Moreover, spectrum sensing has an irreplaceable position in the field of cognitive radio and was widely studied. The convolutional neural networks (CNNs) and the gate recurrent unit (GRU) are complementary in their modelling capabilities. In this paper, we introduce a CNN-GRU network to obtain the local information for single-node spectrum sensing, in which CNN is used to extract spatial feature and GRU is used to extract the temporal feature. Then, the combination network receives the features extracted by the CNN-GRU network to achieve multifeatures combination and obtains the final cooperation result. The cooperative spectrum sensing scheme based on Multifeatures Combination Network enhances the sensing reliability by fusing the local information from different sensing nodes. To accommodate the detection of multiple types of signals, we generated 8 kinds of modulation types to train the model. Theoretical analysis and simulation results show that the cooperative spectrum sensing algorithm proposed in this paper improved detection performance with no prior knowledge about the information of primary user or channel state. Our proposed method achieved competitive performance under the condition of large dynamic signal-to-noise ratio.

scholarly journals Simulation and Analysis of the OFDM Transceiver Based Commutation System

2020 ◽  
Vol 26 (12) ◽  
pp. 131-140
Author(s):  
Areej Munadel ◽  
Ekhlas Kadhum Hamza
Keyword(s):  
Cognitive Radio ◽  
Signal To Noise Ratio ◽  
Radio Spectrum ◽  
Cyclic Prefix ◽  
Probability Of Detection ◽  
Energy Detector ◽  
Signal To Noise ◽  
Wireless Applications ◽  
Low Snr

As a result of the increase in wireless applications, this led to a spectrum problem, which was often a significant restriction. However, a wide bandwidth (more than two-thirds of the available) remains wasted due to inappropriate usage. As a consequence, the quality of the service of the system was impacted. This problem was resolved by using cognitive radio that provides opportunistic sharing or utilization of the spectrum. This paper analyzes the performance of the cognitive radio spectrum sensing algorithm for the energy detector, which implemented by using a MATLAB Mfile version (2018b). The signal to noise ratio SNR vs. Pd probability of detection for OFDM and SNR vs. BER with CP cyclic prefix with energy detector is calculated and analyzed. In this paper, the proposed work produces more accurate results compared to the existing techniques at low SNR values.

Improved MB Cognitive Radio Spectrum Sensing Using Wavelet Spectrum Filtering

2019 ◽  
Vol 28 (08) ◽  
pp. 1950136
Author(s):  
Ricardo Tadashi Kobayashi ◽  
Aislan Gabriel Hernandes ◽  
Mario Lemes Proença ◽  
Taufik Abrao
Keyword(s):  
Cognitive Radio ◽  
Spectrum Sensing ◽  
Orthogonal Frequency Division Multiplexing ◽  
High Performance ◽  
Signal To Noise Ratio ◽  
Analytical Description ◽  
Radio Spectrum ◽  
Wavelet Spectrum ◽  
Edge Location ◽  
Cr System

In cognitive radio (CR), the sensed aggregate bandwidth could be as large as several GHz. This is especially challenging if the bandwidths and central frequencies of the sensed signals are unknown and need to be estimated. This work discusses a new improved method for MB spectrum sensing (iMB-SS) based on edge detection and using Wavelet Spectrum Filtering. The proposed iMB-SS method uses a Welch power spectrum density (PSD) estimate and a multi-scale Wavelet approach to reveal the spectrum transition (edges), which is deployed to characterize the spectrum occupancy in CR scenarios where the operation frequencies of the primary users (PUs) are unknown. The focus of this work lies in improving the performance of the MB spectrum sensor, particularly by refining the spectral edge location and reducing misleading detection. A comprehensive analytical description and numerical analysis have been carried out by focusing on orthogonal-frequency-division-multiplexing (OFDM) signal applications in CR networks. Numerical results corroborate the effectiveness of the proposed iMB-SS approach. The simulated results for the multiple-PU’s OFDM-based transmission CR system demonstrate that the proposed iMB-SS method can achieve high performance even under low signal-to-noise ratio (SNR) regime, turning it out as an attractive choice for SS in the MB CR systems.

A compact guided-wave EMAT with pulsed electromagnet for ferromagnetic tube inspection

2020 ◽  
Vol 64 (1-4) ◽  
pp. 951-958
Author(s):  
Tianhao Liu ◽  
Yu Jin ◽  
Cuixiang Pei ◽  
Jie Han ◽  
Zhenmao Chen
Keyword(s):  
Power Plants ◽  
Signal To Noise Ratio ◽  
Small Diameter ◽  
Performance Testing ◽  
Guided Wave ◽  
High Signal ◽  
Receiver Coil ◽  
Signal To Noise ◽  
Corrosion Defects

Small-diameter tubes that are widely used in petroleum industries and power plants experience corrosion during long-term services. In this paper, a compact inserted guided-wave EMAT with a pulsed electromagnet is proposed for small-diameter tube inspection. The proposed transducer is noncontact, compact with high signal-to-noise ratio and unattractive to ferromagnetic tubes. The proposed EMAT is designed with coils-only configuration, which consists of a pulsed electromagnet and a meander pulser/receiver coil. Both the numerical simulation and experimental results validate its feasibility on generating and receiving L(0,2) mode guided wave. The parameters for driving the proposed EMAT are optimized by performance testing. Finally, feasibility on quantification evaluation for corrosion defects was verified by experiments.

Application of Novel Low Current OBIRCH Amplifier and Nanoprobing to Identify Subtle Leakages in Advanced Node Technologies

2018 ◽  
Author(s):  
Satish Kodali ◽  
Liangshan Chen ◽  
Yuting Wei ◽  
Tanya Schaeffer ◽  
Chong Khiam Oh
Keyword(s):  
Signal To Noise Ratio ◽  
Semiconductor Industry ◽  
Fault Isolation ◽  
Ring Oscillator ◽  
High Signal ◽  
The Novel ◽  
Resistance Change ◽  
Three Samples ◽  
Relative Threshold ◽  
First Time

Abstract Optical beam induced resistance change (OBIRCH) is a very well-adapted technique for static fault isolation in the semiconductor industry. Novel low current OBIRCH amplifier is used to facilitate safe test condition requirements for advanced nodes. This paper shows the differences between the earlier and novel generation OBIRCH amplifiers. Ring oscillator high standby leakage samples are analyzed using the novel generation amplifier. High signal to noise ratio at applied low bias and current levels on device under test are shown on various samples. Further, a metric to demonstrate the SNR to device performance is also discussed. OBIRCH analysis is performed on all the three samples for nanoprobing of, and physical characterization on, the leakage. The resulting spots were calibrated and classified. It is noted that the calibration metric can be successfully used for the first time to estimate the relative threshold voltage of individual transistors in advanced process nodes.

scholarly journals VS2 as saturable absorber for Q-switched pulse generation

Nanophotonics ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 2569-2576 ◽  
Author(s):  
Lu Li ◽  
Lihui Pang ◽  
Qiyi Zhao ◽  
Yao Wang ◽  
Wenjun Liu
Keyword(s):  
Saturable Absorber ◽  
Nonlinear Optical ◽  
Modulation Depth ◽  
Signal To Noise Ratio ◽  
Transition Metal Dichalcogenides ◽  
Laser Cavity ◽  
Pulse Generation ◽  
High Signal ◽  
Power Pulse ◽  
Metal Dichalcogenides

AbstractTransition metal dichalcogenides have been widely utilized as nonlinear optical materials for laser pulse generation applications. Herein, we study the nonlinear optical properties of a VS2-based optical device and its application as a new saturable absorber (SA) for high-power pulse generation. Few-layer VS2 nanosheets are deposited on the tapered region of a microfiber to form an SA device, which shows a modulation depth of 40.52%. After incorporating the microfiber-VS2 SA into an Er-doped fiber laser cavity, passively Q-switched pulse trains could be obtained with repetition rates varying from 95 to 233 kHz. Under the pump power of 890 mW, the largest output power and shortest pulse duration are measured to be 43 mW and 854 ns, respectively. The high signal-to-noise ratio of 60 dB confirms the excellent stability of the Q-switching state. To the best of our knolowdge, this is the first illustration of using VS2 as an SA. Our experimental results demonstrate that VS2 nanomaterials have a large potential for nonlinear optics applications.

scholarly journals Detection and localization of multiple small damages in beam

2021 ◽  
Vol 13 (1) ◽  
pp. 168781402098732
Author(s):  
Ayisha Nayyar ◽  
Ummul Baneen ◽  
Syed Abbas Zilqurnain Naqvi ◽  
Muhammad Ahsan
Keyword(s):  
Frequency Response ◽  
Natural Frequencies ◽  
Signal To Noise Ratio ◽  
Moving Average ◽  
A Priori ◽  
Damage Index ◽  
High Signal ◽  
Frequency Range ◽  
Spatial Locality ◽  
System Frequency

Localizing small damages often requires sensors be mounted in the proximity of damage to obtain high Signal-to-Noise Ratio in system frequency response to input excitation. The proximity requirement limits the applicability of existing schemes for low-severity damage detection as an estimate of damage location may not be known  a priori. In this work it is shown that spatial locality is not a fundamental impediment; multiple small damages can still be detected with high accuracy provided that the frequency range beyond the first five natural frequencies is utilized in the Frequency response functions (FRF) curvature method. The proposed method presented in this paper applies sensitivity analysis to systematically unearth frequency ranges capable of elevating damage index peak at correct damage locations. It is a baseline-free method that employs a smoothing polynomial to emulate reference curvatures for the undamaged structure. Numerical simulation of steel-beam shows that small multiple damages of severity as low as 5% can be reliably detected by including frequency range covering 5–10th natural frequencies. The efficacy of the scheme is also experimentally validated for the same beam. It is also found that a simple noise filtration scheme such as a Gaussian moving average filter can adequately remove false peaks from the damage index profile.

scholarly journals Multi-Winner Spectrum Allocation in Cognitive Radio Networks: A Single-Sided Auction Theoretic Modelling Approach with Sequential Bidding

Electronics ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 602
Author(s):  
Monisha Devi ◽  
Nityananda Sarma ◽  
Sanjib K. Deka
Keyword(s):  
Cognitive Radio ◽  
Communication Networks ◽  
Spectrum Sharing ◽  
Single Channel ◽  
Group Formation ◽  
Radio Spectrum ◽  
Spectrum Allocation ◽  
Allocation Mechanism ◽  
Sealed Bid ◽  
Sequential Bidding

Cognitive radio (CR) has evolved as a novel technology for overcoming the spectrum-scarcity problem in wireless communication networks. With its opportunistic behaviour for improving the spectrum-usage efficiency, CR enables the desired secondary users (SUs) to dynamically utilize the idle spectrum owned by primary users. On sensing the spectrum to identify the idle frequency bands, proper spectrum-allocation mechanisms need to be designed to provide an effectual use of the radio resource. In this paper, we propose a single-sided sealed-bid sequential-bidding-based auction framework that extends the channel-reuse property in a spectrum-allocation mechanism to efficiently redistribute the unused channels. Existing auction designs primarily aim at maximizing the auctioneer’s revenue, due to which certain CR constraints remain excluded in their models. We address two such constraints, viz. the dynamics in spectrum opportunities and varying availability time of vacant channels, and formulate an allocation problem that maximizes the utilization of the radio spectrum. The auctioneer strategises winner determination based on bids collected from SUs and sequentially leases the unused channels, while restricting the channel assignment to a single-channel-multi-user allocation. To model the spectrum-sharing mechanism, we initially developed a group-formation algorithm that enables the members of a group to access a common channel. Furthermore, the spectrum-allocation and pricing algorithms are operated under constrained circumstances, which guarantees truthfulness in the model. An analysis of the simulation results and comparison with existing auction models revealed the effectiveness of the proposed approach in assigning the unexploited spectrum.

scholarly journals Understanding PI-QUAL for prostate MRI quality: a practical primer for radiologists

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Francesco Giganti ◽  
Alex Kirkham ◽  
Veeru Kasivisvanathan ◽  
Marianthi-Vasiliki Papoutsaki ◽  
Shonit Punwani ◽  
...  
Keyword(s):  
Diffusion Weighted Imaging ◽  
Signal To Noise Ratio ◽  
High Signal ◽  
Diagnostic Quality ◽  
Prostate Mri ◽  
Prostate Imaging ◽  
Dynamic Contrast Enhanced ◽  
Diffusion Weighted ◽  
Contrast Enhanced

AbstractProstate magnetic resonance imaging (MRI) of high diagnostic quality is a key determinant for either detection or exclusion of prostate cancer. Adequate high spatial resolution on T2-weighted imaging, good diffusion-weighted imaging and dynamic contrast-enhanced sequences of high signal-to-noise ratio are the prerequisite for a high-quality MRI study of the prostate. The Prostate Imaging Quality (PI-QUAL) score was created to assess the diagnostic quality of a scan against a set of objective criteria as per Prostate Imaging-Reporting and Data System recommendations, together with criteria obtained from the image. The PI-QUAL score is a 1-to-5 scale where a score of 1 indicates that all MR sequences (T2-weighted imaging, diffusion-weighted imaging and dynamic contrast-enhanced sequences) are below the minimum standard of diagnostic quality, a score of 3 means that the scan is of sufficient diagnostic quality, and a score of 5 implies that all three sequences are of optimal diagnostic quality. The purpose of this educational review is to provide a practical guide to assess the quality of prostate MRI using PI-QUAL and to familiarise the radiologist and all those involved in prostate MRI with this scoring system. A variety of images are also presented to demonstrate the difference between suboptimal and good prostate MR scans.

Sign in / Sign up

Export Citation Format

Share Document