scholarly journals Sol-Gel Derived Tertiary Bioactive Glass–Ceramic Nanorods Prepared via Hydrothermal Process and Their Composites with Poly(Vinylpyrrolidone-Co-Vinylsilane)

2020 ◽  
Vol 11 (2) ◽  
pp. 35
Author(s):  
Dibakar Mondal ◽  
Andrei Zaharia ◽  
Kibret Mequanint ◽  
Amin S. Rizkalla
Keyword(s):  
Bioactive Glass ◽  
Bone Repair ◽  
Cell Attachment ◽  
Sol Gel ◽  
Hydrothermal Process ◽  
Ammonium Phosphate ◽  
Fibroblast Cell ◽  
Positive Control ◽  
Hydrothermal Temperature ◽  
Bioactive Composites

Bioactive glass (BG) nanoparticles have wide applications in bone repair due to their bone-bonding and biodegradable nature. In this work, nanometric rod-shaped ternary SiO2-CaO-P2O5 bioactive glass particles were prepared through sol-gel chemistry followed by a base-induced hydrothermal process at 130 °C and 170 °C for various times up to 36 h. This facile, low-temperature and surfactant-free hydrothermal process has shown to be capable of producing uniform nanorods and nanowires. One-dimensional growth of nanorods and the characteristics of siloxane bridging networks were dependent on the hydrothermal temperature and time. Hardened bioactive composites were prepared from BG nanorods and cryo-milled poly(vinylpyrrolidone-co-triethoxyvinylsilane) in the presence of ammonium phosphate as potential bone graft biomaterials. Covalent crosslinking has been observed between the organic and inorganic components within these composites. The ultimate compressive strength and modulus values increased with increasing co-polymer content, reaching 27 MPa and 500 MPa respectively with 30% co-polymer incorporation. The materials degraded in a controlled non-linear manner when incubated in phosphate-buffered saline from 6 h to 14 days. Fibroblast cell attachment and spreading on the composite were not as good as the positive control surfaces and suggested that they may require protein coating in order to promote favorable cell interactions.

In vitro Biocompatibility Tests of Glass Ionomer Cements Impregnated with Collagen or Bioactive glass to Fibroblasts

2012 ◽  
Vol 36 (3) ◽  
pp. 269-274 ◽  
Author(s):  
C Subbarao ◽  
P Neelakantan ◽  
CV Subbarao
Keyword(s):  
Bioactive Glass ◽  
Cell Attachment ◽  
Glass Ionomer Cement ◽  
Mineral Trioxide Aggregate ◽  
Fibroblast Cell ◽  
Glass Ionomer ◽  
Significant Difference ◽  
Electron Microscopes ◽  
Ionomer Cement

Aim and Design: To evaluate the biocompatibility of glass ionomer cement (GIC) impregnated with collagen or bioactive glass to BHK-21 fibroblasts in vitro. Mineral Trioxide Aggregate was used as the standard for comparison. Human maxillary central incisors (n=70) were instrumented with a rotary NiTi system and filled. Following resection of the apical 3mm, root end cavities were prepared and restored with conventional GIC (group 1) or GIC with 0.01%, 0.1% or 1% collagen (groups 2, 3, 4 respectively) or, 10%, 30 % or 50% bioactive glass (groups 5,6,7 respectively), or Mineral Trioxide Aggregate (group 8). The root slices were incubated in tissue culture plates with BHK-21 fibroblast cell line. Phase contrast and scanning electron microscopes were used to score cell quantity, morphology and cell attachment. The data were statistically analyzed by one way ANOVA with Post Hoc Tukey HSD test (p = 0.05). Results and conclusions: Group 5 showed the highest scores which was significantly higher than all other groups (p<0.05) except group 8, with which there was no significant difference (p>0.05). Glass ionomer cement with 10% bioactive glass showed better adhesion and spreading of cells than glass ionomer cement with 0.01% collagen. The biocompatibility of collagen and bioactive glass was concentration dependent. The addition of bio active glass improved the biocompatibility of glass ionomer cement to fibroblasts better than addition of collagen.

A Review of Coating Preparing Techniques of Bioactive Glass

2013 ◽  
Vol 833 ◽  
pp. 202-207 ◽  
Author(s):  
Chuan Zhong Chen ◽  
Xiang Guo Meng ◽  
Hui Jun Yu ◽  
Han Yang ◽  
Ting He ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Bioactive Glass ◽  
Electrophoretic Deposition ◽  
Bone Repair ◽  
Sol Gel ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Research Progress ◽  
Ti Alloys ◽  
Preparation Techniques

Bioactive glass, because of the good bioactivity and biocompatibility, is considered to be the most ideal material for bone repair and replacement. However, the mechanical properties of the bioactive glass are great different from that of human bone. Coating bioactive glass on the surface of Ti or Ti-alloys that possess excellent mechanical properties can offset the disadvantage. In this paper, the research progress in the coating preparing techniques such as enameling, sol-gel, electrophoretic deposition, plasma spraying and pulsed laser deposition is summarized, the advantages and existent problems of the coating preparation techniques are discussed, and the development foreground is forecast.

scholarly journals Attachment and Proliferation of Human-Adipose-Tissue-Derived Stem Cells on Bioactive Glass/PVA Hybrid Scaffolds

2011 ◽  
Vol 2011 ◽  
pp. 1-7 ◽  
Author(s):  
Viviane Gomide ◽  
Alessandra Arcoverde Cavalcanti Zonari ◽  
Natalia Martins Breyner ◽  
Alfredo Miranda de Goes ◽  
Marivalda M. Pereira
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Adipose Tissue ◽  
Bioactive Glass ◽  
Pore Structure ◽  
Bone Repair ◽  
Sol Gel ◽  
Human Adipose Tissue ◽  
Porous Scaffolds

Bioactive glass/polymer hybrids are promising materials for biomedical applications because they combine the bioactivity of bioceramics with the flexibility of polymers. These advantages may be used in porous scaffolds for tissue-engineering applications. In previous works, hybrid foams bioactive glass/polyvinyl alcohol (PVA) were prepared by the sol-gel process. The hybrid foam 50% PVA/50% bioactive glass was chosen in the composition range studied as the scaffold with better compromise in terms of pore structure and mechanical behavior. The aim of the present study was to evaluate the adhesion, viability, and growth behavior of human-adipose-tissue-derived stem cells on bioactive glass/PVA foams in vitro and their potential as scaffold for application in bone-tissue engineering. The pore structure of the hybrid samples used in the study was analyzed by microcomputed tomography, showing a modal pore diameter of 284 μm and modal interconnect diameter of 138 μm. We found that cells are capable of adhesion, proliferation, growth, and ECM production on the scaffolds tested. The results show that the hybrid bioactive glass/PVA is a promising material for bone repair, providing a good environment for the adhesion and proliferation of human-adipose-tissue-derived stem cells in vitro.

In Vitro and In Vivo Evaluation of Bioactive Glass/PVA Porous Hybrids for Application in Bone Reconstruction

2008 ◽  
Vol 396-398 ◽  
pp. 671-674
Author(s):  
Viviane Gomide ◽  
Natália Ocarino ◽  
Rogéria Serakides ◽  
Maria de Fatima Leite ◽  
Marivalda Pereira
Keyword(s):  
Bioactive Glass ◽  
Bone Repair ◽  
Sol Gel ◽  
Bone Matrix ◽  
In Vivo Studies ◽  
Adult Rats ◽  
Osteoblast Culture ◽  
Hybrid Foams

Bioactive glass/polymer hybrids are promising materials for biomedical applications because they combine the bioactivity of these bioceramics with the flexibility of polymers. In previous work hybrid foams with 50% bioactive glass and 50% polyvinyl alcohol (PVA) were prepared by the sol-gel process for application as scaffold for bone tissue engineering. In this work the hybrid samples were tested in osteoblast culture to evaluate adhesion and proliferation. Samples were also implanted subcutaneously in the dorsal region of adult rats. The hybrid 50% PVA/bioactive glass foam was chosen as the best scaffold in the composition range studied and it is a promising material for bone repair, providing a good environment for the adhesion and proliferation of osteoblasts in vitro. Concerning the in vivo studies we can assure that the “foreing body” reaction was moderate and that the presence of osteoid indicated bone matrix formation.

scholarly journals Simple and Acid-Free Hydrothermal Synthesis of Bioactive Glass 58SiO2-33CaO-9P2O5 (wt%)

Crystals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 283
Author(s):  
Ta Anh Tuan ◽  
Elena V. Guseva ◽  
Nguyen Anh Tien ◽  
Ho Tan Dat ◽  
Bui Xuan Vuong
Keyword(s):  
Bioactive Glass ◽  
Inductively Coupled Plasma ◽  
Sol Gel ◽  
Hydrothermal Process ◽  
Optical Emission ◽  
Emission Spectrometry ◽  
Ionic Exchange ◽  
Gel Method ◽  
Sol Gel Method

The paper focuses on the acid-free hydrothermal process for the synthesis of bioactive glass. The new method avoids the use of harmful acid catalysts, which are usually used in the sol-gel process. On the other hand, the processing time was reduced compared with the sol-gel method. A well-known ternary bioactive glass 58SiO2-33CaO-9P2O5 (wt%), which has been widely synthesized through the sol-gel method, was selected to apply to this new process. Thermal behavior, textural property, phase composition, morphology, and ionic exchange were investigated by thermal analysis, N2 adsorption/desorption, XRD, FTIR, SEM, and inductively coupled plasma optical emission spectrometry (ICP-OES) analysis. The bioactivity and biocompatibility of synthetic bioactive glass were evaluated by in vitro experiments with a simulated body fluid (SBF) solution and cell culture medium. The obtained results confirmed that the acid-free hydrothermal process is one of the ideal methods for preparing ternary bioactive glass.

Biocompatibility of the Composite Scaffold of Sol-Gel Bioactive Glass/Collagen

2011 ◽  
Vol 26 (8) ◽  
pp. 869-873
Author(s):  
Xue HAN ◽  
Xiao-Feng CHEN ◽  
Yong-Chun MENG ◽  
Jia-An ZHOU ◽  
Cai LIN ◽  
...  
Keyword(s):  
Bioactive Glass ◽  
Composite Scaffold ◽  
Sol Gel

Regeneration of Bone Defects Using Bioactive Glass Combined with Adipose-derived Mesenchymal Stem Cells. An experimental in vivo study

2019 ◽  
Vol 70 (6) ◽  
pp. 1983-1987
Author(s):  
Cristian Trambitas ◽  
Anca Maria Pop ◽  
Alina Dia Trambitas Miron ◽  
Dorin Constantin Dorobantu ◽  
Flaviu Tabaran ◽  
...  
Keyword(s):  
Stem Cells ◽  
Mesenchymal Stem Cells ◽  
Bioactive Glass ◽  
Bone Repair ◽  
Bone Defects ◽  
Calvarial Bone ◽  
Specific Protocol ◽  
Repair Mechanisms ◽  
Male Wistar Rats

Large bone defects are a medical concern as these are often unable to heal spontaneously, based on the host bone repair mechanisms. In their treatment, bone tissue engineering techniques represent a promising approach by providing a guide for osseous regeneration. As bioactive glasses proved to have osteoconductive and osteoinductive properties, the aim of our study was to evaluate by histologic examination, the differences in the healing of critical-sized calvarial bone defects filled with bioactive glass combined with adipose-derived mesenchymal stem cells, compared to negative controls. We used 16 male Wistar rats subjected to a specific protocol based on which 2 calvarial bone defects were created in each animal, one was filled with Bon Alive S53P4 bioactive glass and adipose-derived stem cells and the other one was considered control. At intervals of one week during the following month, the animals were euthanized and the specimens from bone defects were histologically examined and compared. The results showed that this biomaterial was biocompatible and the first signs of osseous healing appeared in the third week. Bone Alive S53P4 bioactive glass could be an excellent bone substitute, reducing the need of bone grafts.

scholarly journals Nanostructure of bioactive glass affects bone cell attachment via protein restructuring upon adsorption

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Ukrit Thamma ◽  
Tia J. Kowal ◽  
Matthias M. Falk ◽  
Himanshu Jain
Keyword(s):  
Bioactive Glass ◽  
Cell Response ◽  
Interfacial Layer ◽  
Cell Attachment ◽  
Bone Cell ◽  
Nano Structure ◽  
Rgd Sequence ◽  
Engineered Tissue ◽  
Α Helix ◽  
Β Sheet

AbstractThe nanostructure of engineered bioscaffolds has a profound impact on cell response, yet its understanding remains incomplete as cells interact with a highly complex interfacial layer rather than the material itself. For bioactive glass scaffolds, this layer comprises of silica gel, hydroxyapatite (HA)/carbonated hydroxyapatite (CHA), and absorbed proteins—all in varying micro/nano structure, composition, and concentration. Here, we examined the response of MC3T3-E1 pre-osteoblast cells to 30 mol% CaO–70 mol% SiO2 porous bioactive glass monoliths that differed only in nanopore size (6–44 nm) yet resulted in the formation of HA/CHA layers with significantly different microstructures. We report that cell response, as quantified by cell attachment and morphology, does not correlate with nanopore size, nor HA/CHO layer micro/nano morphology, or absorbed protein amount (bovine serum albumin, BSA), but with BSA’s secondary conformation as indicated by its β-sheet/α-helix ratio. Our results suggest that the β-sheet structure in BSA interacts electrostatically with the HA/CHA interfacial layer and activates the RGD sequence of absorbed adhesion proteins, such as fibronectin and vitronectin, thus significantly enhancing the attachment of cells. These findings provide new insight into the interaction of cells with the scaffolds’ interfacial layer, which is vital for the continued development of engineered tissue scaffolds.

Sign in / Sign up

Export Citation Format

Share Document