scholarly journals Fabrication of h-MoO3 Nanorods and the Properties of the MoO3/WEP Composite Coatings Research

2021 ◽  
Vol 5 (8) ◽  
pp. 207
Author(s):  
Ying Zhou ◽  
Cuihuan Song ◽  
Zhixiang Chen ◽  
Qixin Zhou
Keyword(s):  
Electrochemical Impedance ◽  
Composite Coatings ◽  
Polymeric Coating ◽  
Test Results ◽  
X Ray Diffraction ◽  
One Dimensional ◽  
X Ray ◽  
Waterborne Epoxy ◽  
Waterborne Epoxy Resin ◽  
Synthesis Methodology

In this study, we prepared a novel coating composed of hexagonal molybdenum oxide (h-MoO3) nanofiller and waterborne epoxy resin (WEP) to provide corrosion protection. We optimized the h-MoO3 nanorod synthesis methodology first by changing different parameters (pH, temperature, etc.). Furthermore, the as-prepared h-MoO3 rods were characterized using a scanning electron microscope (SEM) and X-ray diffraction (XRD). Finally, the electrochemical impedance spectroscopy (EIS) test results verified that the anticorrosive performance of the composite coatings was improved by incorporation of low content of MoO3 nanofiller (0.5 wt.%) compared to pure WEP sample. This developed composite will provide a new insight for the design and fabrication of one-dimensional (1D) nanomaterial (e.g., nanorod) reinforced epoxy coating and other polymeric coating processes.

scholarly journals Effect of Graphene Oxide Concentration in Electrolyte on Corrosion Behavior of Electrodeposited Zn–Electrochemical Reduction Graphene Composite Coatings

Coatings ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 758 ◽  
Author(s):  
Yang ◽  
Zhang ◽  
Wang ◽  
Wang ◽  
Chen ◽  
...  
Keyword(s):  
Corrosion Behavior ◽  
Electrochemical Impedance ◽  
Composite Coatings ◽  
Laser Raman Spectroscopy ◽  
304 Stainless Steel ◽  
Sulfate Electrolyte ◽  
X Ray Diffraction ◽  
X Ray ◽  
Tafel Polarization ◽  
Laser Raman

Pure Zn and Zn–ERGO composite coatings were prepared by direct current electrodeposition on 304 stainless steel. Samples were characterized by X-ray diffraction (XRD), scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM/EDS), and laser Raman spectroscopy (Raman). Results obtained have shown that the concentration of GO sheets in zinc sulfate electrolyte has an important effect on the preferred crystal orientation and the surface morphology of Zn–ERGO composite coatings. A study of the corrosion behavior of the coatings by Tafel polarization and electrochemical impedance spectroscopic (EIS) methods leads to the conclusion that the Zn-1.0 g/L ERGO composite coating possesses the best corrosion resistance compared to the pure Zn coating and other composite coatings in this study.

Effect of nano Al2O3 coated Ag reinforced Cu matrix nanocomposites on mechanical and tribological behavior synthesis by P/M technique

2020 ◽  
Vol 54 (30) ◽  
pp. 4921-4928
Author(s):  
A Mohamed ◽  
MM Mohammed ◽  
AF Ibrahim ◽  
Omyma A El-Kady
Keyword(s):  
Wear Behavior ◽  
Composite Coatings ◽  
Microstructural Analysis ◽  
Wear Test ◽  
Test Results ◽  
X Ray Diffraction ◽  
X Ray ◽  
Average Hardness ◽  
Ag Particles ◽  
Matrix Nanocomposites

In this study, copper powder was reinforced with different weight percentages of Al2O3 particles (0, 5, 10, and 15 wt.% Al2O3 coated Ag) to produce Cu-Al2O3 composites by mechanical alloying and uniaxial cold pressing/sintering route. Electro-less deposition was used to coat Al2O3 particles with Ag. The microstructure of the consolidated samples was investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) elemental mapping. The porosity, microhardness, and wear behavior of the consolidated samples were also investigated as a function of Al2O3 content. The EDX mapping images reveal that the Al2O3 reinforcement particles were homogeneously distributed into the Cu matrix. Microstructural analysis shows that the addition of Al2O3 coated Ag particles improves density of the composites coating. SEM micrographs result shows that slight porosities exist in the composites produced. Furthermore, the average hardness of the composite coatings varies from 72.3 to 187.6 HV as Al2O3 content increases from 0 to 15 wt.%. The wear test results showed that the composite with higher Al2O3 content 15 wt.% showed the best wear resistance.

Evaluation of Polymeric Coatings in CO2 Containing Environment

2019 ◽  
Vol 965 ◽  
pp. 133-141
Author(s):  
Rayane Z.C. Demoner ◽  
Alexandre R.P. Castro ◽  
Adriana L. Barros ◽  
J.P. Quintela ◽  
Jefferson R. de Oliveira ◽  
...  
Keyword(s):  
Electrochemical Impedance ◽  
Electrochemical Techniques ◽  
Polymeric Coating ◽  
Metallic Surface ◽  
Polymeric Coatings ◽  
X Ray Diffraction ◽  
X Ray ◽  
Linear Polarization Resistance ◽  
Weight Loss Method ◽  
Loss Method

Two types of polymeric coating were applied on an AISI 1020 steel, where one of them was reinforced by carbon nanotubes, with the objective of protection against corrosion in a medium containing saline solution, NaCl 3% wt satured with CO2, at 75 bar and tested at 50oC and 75oC for 360 hours. Electrochemical techniques, such as Linear Polarization Resistance, (LPR), Electrochemical Impedance Spectroscopy (EIS), Tafel curves and weight loss method, were used for coating evaluation performance. Scanning Electron Microscopy (SEM), X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS) were used to determine both the morphology and chemical composition of the layer formed on the analyzed surfaces. The coating adhesion to metallic surface was evaluated using pull-off test according to ASTM D4541-09. For the studied conditions, the results obtained showed that there was no adequate coating protection, occurring failures and indicating that both coatings may not be used in the tested conditions.

PREPARATION AND INVESTIGATION OF ELECTRODEPOSITED Ni–NANO-Cr2O3 COMPOSITE COATINGS

2016 ◽  
Vol 23 (02) ◽  
pp. 1550111 ◽  
Author(s):  
JIBO JIANG ◽  
CHENQI FENG ◽  
WEI QIAN ◽  
LIBIN YU ◽  
FENGYING YE ◽  
...  
Keyword(s):  
Electrochemical Impedance ◽  
Composite Coatings ◽  
Charge Transfer Resistance ◽  
X Ray Diffraction ◽  
Transfer Resistance ◽  
X Ray ◽  
Potentiodynamic Polarization Curves ◽  
Nucleation Sites ◽  
Passive Transition ◽  
Steel Surfaces

The electrodeposition of Ni–nano-Cr2O3 composite coatings was studied in electrolyte containing different contents of Cr2O3 nanoparticles (Cr2O3 NPs) on mild steel surfaces. Some techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), microhardness, the potentiodynamic polarization curves (Tafel) and electrochemical impedance spectroscopy (EIS) were used to compare pure Ni coatings and Ni–nano-Cr2O3 composite coatings. The results show that the incorporation of Cr2O3 NPs resulted in an increase of hardness and corrosion resistance, and the maximum microhardness of Ni-nano-Cr2O3 composite coatings reaches about 495 HV. The coatings exhibit an active-passive transition and relatively large impedance values. Moreover, the effect of Cr2O3 NPs on Ni electrocrystallization is also investigated by cyclic voltammetry (CV) and EIS spectroscopy, which demonstrates that the nature of Ni-based composite coatings changes attributes to Cr2O3 NPs by offering more nucleation sites and less charge transfer resistance.

MICROSTRUCTURE AND WEAR PROPERTIES OF COMPOSITE COATINGS PRODUCED BY LASER CLADDING OF Ti-6Al-4V WITH GRAPHITE AND SILICON MIXED POWDERS

2005 ◽  
Vol 12 (02) ◽  
pp. 161-165 ◽  
Author(s):  
Y. S. TIAN ◽  
C. Z. CHEN ◽  
D. Y. WANG ◽  
Q. H. HUO ◽  
T. Q. LEI
Keyword(s):  
Titanium Alloy ◽  
Friction Coefficient ◽  
Laser Cladding ◽  
Energy Dispersive Spectroscopy ◽  
Composite Coatings ◽  
Transitional Zone ◽  
Test Results ◽  
X Ray Diffraction ◽  
Wear Properties ◽  
X Ray

Composite coatings are fabricated by laser cladding of titanium alloy Ti-6Al-4V with graphite and silicon mixed powders. X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS) indicate that the coatings mainly consist of pre-eutectic TiC and eutectic Ti 5 Si 3 compounds. Test results show that the coatings exhibit a higher microhardness and a lower friction coefficient compared with the as-received sample. EPMA micrographs show that the compounds' morphology in the top zone of the coatings is different from that in the transitional zone.

Effect of Nano-Al2O3 Particles on the NiP/nano-Al2O3 Coatings’ Properties

2011 ◽  
Vol 66-68 ◽  
pp. 1668-1675 ◽  
Author(s):  
Xue Tao Yuan ◽  
Zhi Qiang Hua ◽  
Lei Wang ◽  
Dong Bai Sun ◽  
Song Lin Chen
Keyword(s):  
Corrosion Resistance ◽  
Electrochemical Impedance ◽  
Composite Coatings ◽  
Electroless Nickel ◽  
Nano Particles ◽  
X Ray Diffraction ◽  
Regular Surface ◽  
X Ray ◽  
Electrochemical Tests ◽  
Better Than

Composite coatings were prepared using electroless nickel bath containing different concentrations of Al2O3nano-particles. The analyses of coating compositions, carried out by EDS, showed that there is marginal difference between phosphorus contents of NiP and NiP/nano-Al2O3deposits. The structure of the coatings was examined by scanning electron microscopy (SEM), and X-ray diffraction (XRD). It has been found that the co-deposition of nano-Al2O3particles with Ni disturbs the NiP coating’s regular surface structure and increases its surface roughness. DC and AC electrochemical tests were carried out on such coatings in a 3.5wt.% solution of NaCl in order to evaluate their corrosion resistance. The potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) tests both showed that, the corrosion resistance of NiP-Al2O3coatings firstly increases and then decreases when Al2O3concentration in electroless bath is increasing, but the corrosion resistance of NiP-Al2O3composite coating is better than that of amorphous NiP coating.

scholarly journals Electrodeposition Based Preparation of Zn–Ni Alloy and Zn–Ni–WC Nano-Composite Coatings for Corrosion-Resistant Applications

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 712
Author(s):  
Channagiri Mohankumar Praveen Kumar ◽  
Avinash Lakshmikanthan ◽  
Manjunath Patel Gowdru Chandrashekarappa ◽  
Danil Yurievich Pimenov ◽  
Khaled Giasin
Keyword(s):  
Corrosion Rate ◽  
Electrochemical Impedance ◽  
Steel Substrate ◽  
Composite Coatings ◽  
Substrate Surface ◽  
X Ray Diffraction ◽  
Corrosion Resistant ◽  
X Ray ◽  
Texture Coefficients ◽  
Surface Morphologies

Zinc (Zn) is one of the five most widely consumed metals in the world. Indeed, more than 50% of all the zinc produced is used in zinc-galvanizing processes to protect steel from corrosion. Zn-based coatings have the potential for use as a corrosion-resistant barrier, but their wider use is restricted due to the poor mechanical properties of Zn that are needed to protect steel and other metals from rusting. The addition of other alloying elements such as Ni (Nickle) and WC (Tungsten Carbide) to Zn coating can improve its performance. This study investigates, the corrosion performance of Zn–Ni coating and Zn–Ni–WC composite nanocoatings fabricated on mild steel substrate in an environmentally friendly bath solution. The influence of WC nanoparticles on Zn–Ni deposition was also investigated. The surface morphologies, texture coefficients via XRD (X-ray diffraction), SEM (Scanning Electron Microscopy), and EDS (Energy-dispersive X-ray spectroscopy) were analyzed. The electrochemical test such as polarization curves (PC) and electrochemical impedance spectroscopy (EIS) resulted in a corrosion rate of 0.6948 Å/min for Zn–Ni–WC composite nanocoating, and 1.192 Å/min for Zn–Ni coating. The results showed that the Zn–Ni–WC composite nanocoating reduced the corrosion rate by 41.71% and showed an 8.56% increase in microhardness compared to the hardness of the Zn–Ni coating. These results are augmented to better wettable characteristics of zinc, which developed good interfacial metallurgical adhesion amongst the Ni and WC elements. The results of the novel Zn–Ni–WC nanocomposite coatings achieved a great improvement of mechanical property and corrosion protection to the steel substrate surface.

Effect of Zn Content on Structure, Roughness and Corrosion Behavior of Zn-Ni Alloys

2019 ◽  
Vol 17 (17) ◽  
pp. 17-22
Author(s):  
Hayette Faid
Keyword(s):  
Corrosion Behavior ◽  
Electrochemical Impedance ◽  
Stripping Voltammetry ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ni Alloys ◽  
Sulfate Bath ◽  
Zn Content ◽  
Polarization Test ◽  
Δ Phase

AbstractIn this work, Zn-Ni alloys have been deposited on steel from sulfate bath, by electrodeposition method. The effect of Zn content on deposits properties was studied by cyclic voltammetry (CV), chronoaperometry (CA), linear stripping voltammetry (ALSV) and diffraction (XRD) and scanning electronic microscopy (SEM). The corrosion behavior in 3.5 wt. NaCl solution was examined using anodic polarization test and electrochemical impedance spectroscopy. X-ray diffraction of show that Zn-Ni alloys structure is composed of δ phase and γ phase, which increase with the decrease of Zn content in deposits. Results show that deposits obtained from bath less Zn2+ concentration exhibited better corrosion resistance.

Characterizations of Synthetic 8mol% YSZ with Comparison to 3mol %YSZ for HT-SOFC

2020 ◽  
Vol 38 (4A) ◽  
pp. 491-500
Author(s):  
Abeer F. Al-Attar ◽  
Saad B. H. Farid ◽  
Fadhil A. Hashim
Keyword(s):  
Ionic Conductivity ◽  
Electrochemical Impedance ◽  
Structural Information ◽  
Impedance Analysis ◽  
High Energy ◽  
Yttria Stabilized Zirconia ◽  
X Ray Diffraction ◽  
Stabilized Zirconia ◽  
Powder Morphology ◽  
X Ray

In this work, Yttria (Y2O3) was successfully doped into tetragonal 3mol% yttria stabilized Zirconia (3YSZ) by high energy-mechanical milling to synthesize 8mol% yttria stabilized Zirconia (8YSZ) used as an electrolyte for high temperature solid oxide fuel cells (HT-SOFC). This work aims to evaluate the densification and ionic conductivity of the sintered electrolytes at 1650°C. The bulk density was measured according to ASTM C373-17. The powder morphology and the microstructure of the sintered electrolytes were analyzed via Field Emission Scanning Electron Microscopy (FESEM). The chemical analysis was obtained with Energy-dispersive X-ray spectroscopy (EDS). Also, X-ray diffraction (XRD) was used to obtain structural information of the starting materials and the sintered electrolytes. The ionic conductivity was obtained through electrochemical impedance spectroscopy (EIS) in the air as a function of temperatures at a frequency range of 100(mHz)-100(kHz). It is found that the 3YSZ has a higher density than the 8YSZ. The impedance analysis showed that the ionic conductivity of the prepared 8YSZ at 800°C is0.906 (S.cm) and it was 0.214(S.cm) of the 3YSZ. Besides, 8YSZ has a lower activation energy 0.774(eV) than that of the 3YSZ 0.901(eV). Thus, the prepared 8YSZ can be nominated as an electrolyte for the HT-SOFC.

Transient liquid phase bonding of Cu and Al using metallic particles interlayers

2021 ◽  
pp. 095440542098823
Author(s):  
Alireza Zaheri ◽  
Mohammadreza Farahani ◽  
Alireza Sadeghi ◽  
Naser Souri
Keyword(s):  
Liquid Phase ◽  
Mechanical Test ◽  
Transient Liquid Phase ◽  
Transient Liquid Phase Bonding ◽  
Joint Interface ◽  
Test Results ◽  
X Ray Diffraction ◽  
X Ray ◽  
Metallic Particles ◽  
Powder Interlayer

The bonding strength, and microstructures of Cu and Al couples using metallic powders as interlayer during transient liquid phase bonding (TLP bonding) were investigated. The interfacial morphologies and microstructures were studied by scanning electron microscopy equipped with energy dispersive X-ray spectroscopy, and X-ray diffraction. First, to explore the optimum bonding time and temperature, nine samples were bonded without interlayers in a vacuum condition. Mechanical test results indicated that bonding at 560°C in 20 min returns the highest bond strength (84% of Al). This bonding condition was used to join ten samples with powder interlayers. Powders were prepared by mixing different combinations of Cu, Al (+Fe nanoparticles) and Zn. In the bonding zone, different Cu9Al4, CuAl, and CuAl2 intermetallic co-precipitate. The strongest bonding is formed in the sample with the 70Al (+Fe)-30Cu powder interlayer. Powder interlayers present thinner and more uniform intermetallic layers at the joint interface.

Sign in / Sign up

Export Citation Format

Share Document