scholarly journals Additive Manufacturing for Effective Smart Structures: The Idea of 6D Printing

2021 ◽  
Vol 5 (5) ◽  
pp. 119
Author(s):  
Stelios K. Georgantzinos ◽  
Georgios I. Giannopoulos ◽  
Panteleimon A. Bakalis
Keyword(s):  
Additive Manufacturing ◽  
Degrees Of Freedom ◽  
Smart Structures ◽  
Interaction Mechanism ◽  
Modeling And Simulations ◽  
Environmental Stimulus ◽  
Material Component ◽  
Design And Manufacturing ◽  
First Time ◽  
Printing Techniques

This paper aims to establish six-dimensional (6D) printing as a new branch of additive manufacturing investigating its benefits, advantages as well as possible limitations concerning the design and manufacturing of effective smart structures. The concept of 6D printing, to the authors’ best knowledge, is introduced for the first time. The new method combines the four-dimensional (4D) and five-dimensional (5D) printing techniques. This means that the printing process is going to use five degrees of freedom for creating the final object while the final produced material component will be a smart/intelligent one (i.e., will be capable of changing its shape or properties due to its interaction with an environmental stimulus). A 6D printed structure can be stronger and more effective than a corresponding 4D printed structure, can be manufactured using less material, can perform movements by being exposed to an external stimulus through an interaction mechanism, and it may learn how to reconfigure itself suitably, based on predictions via mathematical modeling and simulations.

scholarly journals Advances in 3D Printing for Tissue Engineering

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3149
Author(s):  
Angelika Zaszczyńska ◽  
Maryla Moczulska-Heljak ◽  
Arkadiusz Gradys ◽  
Paweł Sajkiewicz
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Complex Structure ◽  
Three Dimensional ◽  
Computer Assisted ◽  
Scaffold Fabrication ◽  
Manufacturing Techniques ◽  
Printing Techniques ◽  
State Of Art

Tissue engineering (TE) scaffolds have enormous significance for the possibility of regeneration of complex tissue structures or even whole organs. Three-dimensional (3D) printing techniques allow fabricating TE scaffolds, having an extremely complex structure, in a repeatable and precise manner. Moreover, they enable the easy application of computer-assisted methods to TE scaffold design. The latest additive manufacturing techniques open up opportunities not otherwise available. This study aimed to summarize the state-of-art field of 3D printing techniques in applications for tissue engineering with a focus on the latest advancements. The following topics are discussed: systematics of the available 3D printing techniques applied for TE scaffold fabrication; overview of 3D printable biomaterials and advancements in 3D-printing-assisted tissue engineering.

Free Vibration Analysis of Two-Stage Planetary Gear With Friction

2018 ◽  
Author(s):  
Wei Liu ◽  
Yunbo Yuan ◽  
Tao He ◽  
Donghua Wang
Keyword(s):  
Free Vibration ◽  
Degrees Of Freedom ◽  
Sliding Friction ◽  
Free Vibration Analysis ◽  
Planetary Gear ◽  
Two Stage ◽  
Second Stage ◽  
Torsional Coupling ◽  
Coupling Dynamic ◽  
First Time

Considering the effect of teeth surface sliding friction, free vibration of two-stage planetary gears (TPG) is studied theoretically for the first time. The lateral-torsional coupling dynamic model and equation are established with three degrees of freedom: two translations and one rotation. The change rule of natural frequency is discussed with the case of first stage planetary gear’s number 4 and second stage planetary gear’s number 3, 4 and 5. Afterwards three vibration modes are summarized by calculating the free vibration. In order to understand the behavior of friction, the effect of friction on natural frequencies is analyzed for the case of considering friction and not considering friction. Furthermore, the ‘self-coupling’ phenomenon is obtained from the vibration of center component of TPG Meanwhile, the ‘mutual coupling’ is obtained between the first-stage planetary gear (FPG) and the second-stage planetary gear (SPG).

scholarly journals 3D Digitization and Additive Manufacturing Technologies in Medicine

2018 ◽  
Vol 26 (42) ◽  
pp. 165-170
Author(s):  
Ivan Molnár ◽  
Ladislav Morovič
Keyword(s):  
Additive Manufacturing ◽  
Manufacturing Processes ◽  
Design And Manufacturing ◽  
Medical Aids ◽  
Manufacturing Methods ◽  
Manufacturing Technologies ◽  
Design And Manufacture ◽  
3D Digitization ◽  
The Given

Abstract The paper discusses the use of 3D digitization and additive manufacturing technologies in the field of medicine. In addition, applications of the use of 3D digitization and additive manufacturing methods are described, focusing on the design and manufacture of individual medical aids. Subsequently, the process of designing and manufacturing of orthopedic aids using these technologies is described and the advantages of introducing the given technologies into the design and manufacturing processes in the medicine sector are presented.

scholarly journals Design for Additive Manufacturing and for Machining in the Automotive Field

2021 ◽  
Vol 11 (16) ◽  
pp. 7559
Author(s):  
Elena Bassoli ◽  
Silvio Defanti ◽  
Emanuele Tognoli ◽  
Nicolò Vincenzi ◽  
Lorenzo Degli Esposti
Keyword(s):  
Additive Manufacturing ◽  
Process Simulation ◽  
Automotive Application ◽  
Powder Bed Fusion ◽  
Design For Additive Manufacturing ◽  
Good Correspondence ◽  
Powder Bed ◽  
Aluminum Component ◽  
Machining Operations ◽  
First Time

High cost, unpredictable defects and out-of-tolerance rejections in final parts are preventing the complete deployment of Laser-based Powder Bed Fusion (LPBF) on an industrial scale. Repeatability, speed and right-first-time manufacturing require synergistic design approaches. In addition, post-build finishing operations of LPBF parts are the object of increasing attention to avoid the risk of bottlenecks in the machining step. An aluminum component for automotive application was redesigned through topology optimization and Design for Additive Manufacturing. Simulation of the build process allowed to choose the orientation and the support location for potential lowest deformation and residual stresses. Design for Finishing was adopted in order to facilitate the machining operations after additive construction. The optical dimensional check proved a good correspondence with the tolerances predicted by process simulation and confirmed part acceptability. A cost and time comparison versus CNC alone attested to the convenience of LPBF unless single parts had to be produced.

Reconfigurable molds and a fabrication-aware design tool for manufacturing concrete grid structures

2021 ◽  
pp. 147807712110300
Author(s):  
Ali Baghi ◽  
Saleh Kalantari ◽  
Aryan Baghi
Keyword(s):  
Additive Manufacturing ◽  
Casting Machine ◽  
Design Tool ◽  
Digital Design ◽  
Architectural Geometry ◽  
Current Trends ◽  
Design And Manufacturing ◽  
Concrete Joints ◽  
Concrete Casting ◽  
Concrete Elements

The design and manufacturing of concrete elements need to be reconsidered in light of current trends in architectural geometry. Today, there is a movement toward greater customization and adaptability of concrete elements using “reconfigurable formworks” and “additive manufacturing.” Our study approached the issue of fabricating non-standardized concrete elements from the perspective of a “reconfigurable fabrication platform.” Specifically, we developed a method of fabricating geometrically diverse concrete joints by combining flexible pressure-enduring tubes with a rigid mechanism, resulting in an adaptive concrete-casting machine. This platform, which we named “Flexi-node,” can be used in conjunction with a relevant fabrication-aware digital design tool. Users can computationally design and fabricate a great variety of concrete joints using just one mold, with a minimum of material waste and with no distortion from hydrostatic pressure as would typically occur in a fully flexible formwork.

A Robotic Cell for Embedding Prefabricated Components in Extrusion-Based Additive Manufacturing

2020 ◽  
Author(s):  
Yeo Jung Yoon ◽  
Oswin G. Almeida ◽  
Aniruddha V. Shembekar ◽  
Satyandra K. Gupta
Keyword(s):  
Additive Manufacturing ◽  
Degrees Of Freedom ◽  
Robotic Manipulators ◽  
The Other ◽  
Robotic Arm ◽  
Robotic Cell ◽  
Material Extrusion ◽  
Surface Polishing ◽  
Pick And Place ◽  
6 Degrees Of Freedom

Abstract By attaching a material extrusion system to a robotic arm, we can deposit materials onto complex surfaces. Robotic manipulators can also maximize the task utility by performing other tasks such as assembly or surface polishing when they are not in use for the AM process. We present a robotic cell for embedding prefabricated components in extrusion-based AM. The robotic cell consists of two 6 degrees of freedom (DOF) robots, an extrusion system, and a gripper. One robot is used for printing a part, and the other robot takes a support role to pick and place the prefabricated component and embed it into the part being printed. After the component is embedded, AM process resumes, and the material is deposited onto the prefabricated components and previously printed layers. We illustrate the capabilities of the system by fabricating three objects.

Smart Structures—Additive Manufacturing of Stimuli-Responsive Hydrogels for Adaptive Packings

2020 ◽  
Vol 59 (43) ◽  
pp. 19458-19464
Author(s):  
Xihua Hu ◽  
Claas Spille ◽  
Michael Schlüter ◽  
Irina Smirnova
Keyword(s):  
Additive Manufacturing ◽  
Smart Structures ◽  
Stimuli Responsive ◽  
Responsive Hydrogels

scholarly journals An Industry 4.0 framework for tooling production using metal additive manufacturing-based first-time-right smart manufacturing system

Procedia CIRP ◽  
2020 ◽  
Vol 93 ◽  
pp. 32-37 ◽  
Author(s):  
Mandaná Moshiri ◽  
Amal Charles ◽  
Ahmed Elkaseer ◽  
Steffen Scholz ◽  
Sankhya Mohanty ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Industry 4.0 ◽  
Manufacturing System ◽  
Smart Manufacturing ◽  
Metal Additive Manufacturing ◽  
First Time ◽  
Metal Additive
Sign in / Sign up

Export Citation Format

Share Document