scholarly journals Performance Evaluation of GIS-Based Artificial Intelligence Approaches for Landslide Susceptibility Modeling and Spatial Patterns Analysis

2020 ◽  
Vol 9 (7) ◽  
pp. 443 ◽  
Author(s):  
Xinxiang Lei ◽  
Wei Chen ◽  
Binh Thai Pham
Keyword(s):  
Landslide Susceptibility ◽  
Local Governments ◽  
Training Data ◽  
Machine Learning Techniques ◽  
Landslide Susceptibility Mapping ◽  
Training Dataset ◽  
Validation Dataset ◽  
Affecting Factors ◽  
Susceptibility Maps ◽  
Landslide Susceptibility Maps

The main purpose of this study was to apply the novel bivariate weights-of-evidence-based SysFor (SF) for landslide susceptibility mapping, and two machine learning techniques, namely the naïve Bayes (NB) and Radial basis function networks (RBFNetwork), as benchmark models. Firstly, by using aerial photos and geological field surveys, the 263 landslide locations in the study area were obtained. Next, the identified landslides were randomly classified according to the ratio of 70/30 to construct training data and validation models, respectively. Secondly, based on the landslide inventory map, combined with the geological and geomorphological characteristics of the study area, 14 affecting factors of the landslide were determined. The predictive ability of the selected factors was evaluated using the LSVM model. Using the WoE model, the relationship between landslides and affecting factors was analyzed by positive and negative correlation methods. The above three hybrid models were then used to map landslide susceptibility. Thirdly, the ROC curve and various statistical data (SE, 95% CI and MAE) were used to verify and compare the predictive power of the model. Compared with the other two models, the Sysfor model had a larger area under the curve (AUC) of 0.876 (training dataset) and 0.783 (validation dataset). Finally, by quantitatively comparing the susceptibility values of each pixel, the differences in spatial morphology of landslide susceptibility maps were compared, and the model was found to have limitations and effectiveness. The landslide susceptibility maps obtained by the three models are reasonable, and the landslide susceptibility maps generated by the SysFor model have the highest comprehensive performance. The results obtained in this paper can help local governments in land use planning, disaster reduction and environmental protection.

scholarly journals Hybrid Computational Intelligence Methods for Landslide Susceptibility Mapping

Symmetry ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 325 ◽  
Author(s):  
Guirong Wang ◽  
Xinxiang Lei ◽  
Wei Chen ◽  
Himan Shahabi ◽  
Ataollah Shirzadi
Keyword(s):  
Landslide Susceptibility ◽  
Radial Basis Function Network ◽  
Slope Angle ◽  
Susceptibility Mapping ◽  
Landslide Susceptibility Mapping ◽  
Training Dataset ◽  
Validation Dataset ◽  
Slope Aspect ◽  
Susceptibility Maps ◽  
Landslide Susceptibility Maps

In this study, hybrid integration of MultiBoosting based on two artificial intelligence methods (the radial basis function network (RBFN) and credal decision tree (CDT) models) and geographic information systems (GIS) were used to establish landslide susceptibility maps, which were used to evaluate landslide susceptibility in Nanchuan County, China. First, the landslide inventory map was generated based on previous research results combined with GIS and aerial photos. Then, 298 landslides were identified, and the established dataset was divided into a training dataset (70%, 209 landslides) and a validation dataset (30%, 89 landslides) with ensured randomness, fairness, and symmetry of data segmentation. Sixteen landslide conditioning factors (altitude, profile curvature, plan curvature, slope aspect, slope angle, stream power index (SPI), topographical wetness index (TWI), sediment transport index (STI), distance to rivers, distance to roads, distance to faults, rainfall, NDVI, soil, land use, and lithology) were identified in the study area. Subsequently, the CDT, RBFN, and their ensembles with MultiBoosting (MCDT and MRBFN) were used in ArcGIS to generate the landslide susceptibility maps. The performances of the four landslide susceptibility maps were compared and verified based on the area under the curve (AUC). Finally, the verification results of the AUC evaluation show that the landslide susceptibility mapping generated by the MCDT model had the best performance.

scholarly journals GIS-based landslide susceptibility mapping using bivariate statistical methods in North-western Tunisia

2019 ◽  
Vol 11 (1) ◽  
pp. 708-726
Author(s):  
Zorgati Anis ◽  
Gallala Wissem ◽  
Vakhshoori Vali ◽  
Habib Smida ◽  
Gaied Mohamed Essghaier
Keyword(s):  
Landslide Susceptibility ◽  
Vegetation Index ◽  
Satellite Image ◽  
Susceptibility Mapping ◽  
Weight Of Evidence ◽  
Landslide Susceptibility Mapping ◽  
Slope Aspect ◽  
Susceptibility Maps ◽  
North Western ◽  
Landslide Susceptibility Maps

AbstractThe Tunisian North-western region, especially Tabarka and Ain-Drahim villages, presents many landslides every year. Therefore, the landslide susceptibility mapping is essential to frame zones with high landslide susceptibility, to avoid loss of lives and properties. In this study, two bivariate statistical models: the evidential belief functions (EBF) and the weight of evidence (WoE), were used to produce landslide susceptibility maps for the study area. For this, a landslide inventory map was mapped using aerial photo, satellite image and extensive field survey. A total of 451 landslides were randomly separated into two datasets: 316 landslides (70%) for modelling and 135 landslides (30%) for validation. Then, 11 landslide conditioning factors: elevation, slope, aspect, lithology, rainfall, normalized difference vegetation index (NDVI), land cover/use, plan curvature, profile curvature, distance to faults and distance to drainage networks, were considered for modelling. The EBF and WoE models were well validated using the Area Under the Receiver Operating Characteristic (AUROC) curve with a success rate of 87.9% and 89.5%, respectively, and a predictive rate of 84.8% and 86.5%, respectively. The landslide susceptibility maps were very similar by the two models, but the WoE model is more efficient and it can be useful in future planning for the current study area.

scholarly journals Comparison of Random Forest Model and Frequency Ratio Model for Landslide Susceptibility Mapping (LSM) in Yunyang County (Chongqing, China)

2020 ◽  
Vol 17 (12) ◽  
pp. 4206 ◽  
Author(s):  
Yue Wang ◽  
Deliang Sun ◽  
Haijia Wen ◽  
Hong Zhang ◽  
Fengtai Zhang
Keyword(s):  
Random Forest ◽  
Landslide Susceptibility ◽  
Frequency Ratio ◽  
Coincidence Degree ◽  
Susceptibility Mapping ◽  
Machine Learning Techniques ◽  
Landslide Susceptibility Mapping ◽  
Training Dataset ◽  
Entire Area ◽  
Conditioning Factors

To compare the random forest (RF) model and the frequency ratio (FR) model for landslide susceptibility mapping (LSM), this research selected Yunyang Country as the study area for its frequent natural disasters; especially landslides. A landslide inventory was built by historical records; satellite images; and extensive field surveys. Subsequently; a geospatial database was established based on 987 historical landslides in the study area. Then; all the landslides were randomly divided into two datasets: 70% of them were used as the training dataset and 30% as the test dataset. Furthermore; under five primary conditioning factors (i.e., topography factors; geological factors; environmental factors; human engineering activities; and triggering factors), 22 secondary conditioning factors were selected to form an evaluation factor library for analyzing the landslide susceptibility. On this basis; the RF model training and the FR model mathematical analysis were performed; and the established models were used for the landslide susceptibility simulation in the entire area of Yunyang County. Next; based on the analysis results; the susceptibility maps were divided into five classes: very low; low; medium; high; and very high. In addition; the importance of conditioning factors was ranked and the influence of landslides was explored by using the RF model. The area under the curve (AUC) value of receiver operating characteristic (ROC) curve; precision; accuracy; and recall ratio were used to analyze the predictive ability of the above two LSM models. The results indicated a difference in the performances between the two models. The RF model (AUC = 0.988) performed better than the FR model (AUC = 0.716). Moreover; compared with the FR model; the RF model showed a higher coincidence degree between the areas in the high and the very low susceptibility classes; on the one hand; and the geographical spatial distribution of historical landslides; on the other hand. Therefore; it was concluded that the RF model was more suitable for landslide susceptibility evaluation in Yunyang County; because of its significant model performance; reliability; and stability. The outcome also provided a theoretical basis for application of machine learning techniques (e.g., RF) in landslide prevention; mitigation; and urban planning; so as to deliver an adequate response to the increasing demand for effective and low-cost tools in landslide susceptibility assessments.

scholarly journals Spatial landslide susceptibility mapping using integrating an adaptive neuro-fuzzy inference system (ANFIS) with two multi-criteria decision-making approaches

2021 ◽  
Author(s):  
Sina Paryani ◽  
Aminreza Neshat ◽  
Biswajeet Pradhan
Keyword(s):  
Decision Making ◽  
Land Use ◽  
Landslide Susceptibility ◽  
Fuzzy Inference ◽  
Landslide Susceptibility Mapping ◽  
Multi Criteria Decision Making ◽  
Inference System ◽  
Susceptibility Maps ◽  
Neuro Fuzzy ◽  
Landslide Susceptibility Maps

Abstract Landslide is a type of slope processes causing a plethora of economic damage and loss of lives worldwide every year. This study aimed to analyze spatial landslide susceptibility mapping in the Khalkhal-Tarom Basin by integrating an adaptive neuro-fuzzy inference system (ANFIS) with two multi-criteria decision-making approaches, i.e. the stepwise weight assessment ratio analysis (SWARA) and the new best-worst method (BWM) techniques. For this purpose, the first step was to prepare a landslide inventory map, which were then divided randomly by the ratio of 30/70 for model training and validation. Thirteen conditioning factors were used as slope angle, slope aspect, altitude, topographic wetness index (TWI), plan curvature, profile curvature, distance to roads, distance to streams, distance to faults, lithology, land use, rainfall and normalized difference vegetation index (NDVI). After the database was created, the BWM and the SWARA methods were utilized to determine the relationships between the sub-criteria and landslides. Finally, landslide susceptibility maps were generated by implementing ANFIS-SWARA and ANFIS-BWM hybrid models, and the ROC curve was employed to appraise the predictive accuracy of each model. The results showed that the areas under curves (AUC) for the ANFIS-SWARA and ANFIS-BWM models were 73.6% and 75% respectively, and that the novel BWM yielded more realistic relationships between effective factors and the landslides. As a result, it was more efficient in training the ANFIS. Evidently, the generated landslide susceptibility maps (LSMs) can be very efficient in managing land use and preventing the damage caused by the landslide phenomenon.

scholarly journals GIS-Based Soft Computing Models for Landslide Susceptibility Mapping: A Case Study of Pithoragarh District, Uttarakhand State, India

2021 ◽  
Vol 2021 ◽  
pp. 1-19
Author(s):  
Trung-Hieu Tran ◽  
Nguyen Duc Dam ◽  
Fazal E. Jalal ◽  
Nadhir Al-Ansari ◽  
Lanh Si Ho ◽  
...  
Keyword(s):  
Soft Computing ◽  
Landslide Susceptibility ◽  
Google Earth ◽  
Susceptibility Mapping ◽  
Landslide Susceptibility Mapping ◽  
Statistical Measures ◽  
Susceptibility Maps ◽  
Predicted Values ◽  
Landslide Susceptibility Maps ◽  
Computing Models

The main objective of the study was to investigate performance of three soft computing models: Naïve Bayes (NB), Multilayer Perceptron (MLP) neural network classifier, and Alternating Decision Tree (ADT) in landslide susceptibility mapping of Pithoragarh District of Uttarakhand State, India. For this purpose, data of 91 past landslide locations and ten landslide influencing factors, namely, slope degree, curvature, aspect, land cover, slope forming materials (SFM), elevation, distance to rivers, geomorphology, overburden depth, and distance to roads were considered in the models study. Thematic maps of the Geological Survey of India (GSI), Google Earth images, and Aster Digital Elevation Model (DEM) were used for the development of landslide susceptibility maps in the Geographic Information System (GIS) environment. Landslide locations data was divided into a 70 : 30 ratio for the training (70%) and testing/validation (30%) of the three models. Standard statistical measures, namely, Positive Predicted Values (PPV), Negative Predicted Values (NPV), Sensitivity, Specificity, Mean Absolute Error (MAE), Root Mean Squire Error (RMSE), and Area under the ROC Curve (AUC) were used for the evaluation of the models. All the three soft computing models used in this study have shown good performance in the accurate development of landslide susceptibility maps, but performance of the ADT and MLP is better than NB. Therefore, these models can be used for the construction of accurate landslide susceptibility maps in other landslide-prone areas also.

scholarly journals Evaluation of Different Machine Learning Models and Novel Deep Learning-based Algorithm for Landslide Susceptibility Mapping

2021 ◽  
Author(s):  
Tingyu Zhang ◽  
Huanyuan Wang ◽  
Tianqing Chen ◽  
Zenghui Sun ◽  
Tao Wang ◽  
...  
Keyword(s):  
Deep Learning ◽  
Landslide Susceptibility ◽  
Reference Model ◽  
Susceptibility Mapping ◽  
Landslide Susceptibility Mapping ◽  
Training Dataset ◽  
Validation Dataset ◽  
Support Vector ◽  
Operating Characteristics ◽  
Predisposing Factor

Abstract The losses and damage caused by landslides are countless in the world every year. However, the existing approaches of landslide susceptibility mapping cannot fully meet the requirement of landslide prevention, and further excavation and innovation are also needed. Therefore, the main aim of this study is to develop a novel deep learning model namely landslide net (LSNet) to assess the landslide susceptibility in Hanyin County, China, meanwhile, support vector machine model (SVM) and kernel logistic regression model (KLR) were employed as reference model. The inventory map was generated based on 259 landslides, the training dataset and validation dataset were respectively prepared using 70% landslides and the remaining 30% landslides. The variance inflation factor (VIF) was applied to optimize each landslide predisposing factor. Three benchmark indices were used to evaluate the result of susceptibility mapping and area under receiver operating characteristics curve (AUROC) was used to compare the models. Result demonstrated that although the processing speed of LSNet model is the slowest, it still significantly outperformed its corresponding benchmark models with validation dataset, and has the highest accuracy (0.950), precision (0.951), F1 (0.951) and AUROC (0.941), which reflected excellent predictive ability in some degree. The achievements obtained in this study can improve the rapid response capability of landslide prevention for Hanyin County.

scholarly journals The Influence of Different Knowledge-Driven Methods on Landslide Susceptibility Mapping: A Case Study in the Changbai Mountain Area, Northeast China

Entropy ◽  
2019 ◽  
Vol 21 (4) ◽  
pp. 372 ◽  
Author(s):  
Zhongjun Ma ◽  
Shengwu Qin ◽  
Chen Cao ◽  
Jiangfeng Lv ◽  
Guangjie Li ◽  
...  
Keyword(s):  
Landslide Susceptibility ◽  
Northeast China ◽  
Susceptibility Mapping ◽  
Changbai Mountain ◽  
Landslide Susceptibility Mapping ◽  
Slope Aspect ◽  
Topographic Wetness Index ◽  
Mountain Area ◽  
Susceptibility Maps ◽  
Landslide Susceptibility Maps

Landslides are one of the most frequent geomorphic hazards, and they often result in the loss of property and human life in the Changbai Mountain area (CMA), Northeast China. The objective of this study was to produce and compare landslide susceptibility maps for the CMA using an information content model (ICM) with three knowledge-driven methods (the artificial hierarchy process with the ICM (AHP-ICM), the entropy weight method with the ICM (EWM-ICM), and the rough set with the ICM (RS-ICM)) and to explore the influence of different knowledge-driven methods for a series of parameters on the accuracy of landslide susceptibility mapping (LSM). In this research, the landslide inventory data (145 landslides) were randomly divided into a training dataset: 70% (81 landslides) were used for training the models and 30% (35 landslides) were used for validation. In addition, 13 layers of landslide conditioning factors, namely, altitude, slope gradient, slope aspect, lithology, distance to faults, distance to roads, distance to rivers, annual precipitation, land type, normalized difference vegetation index (NDVI), topographic wetness index (TWI), plan curvature, and profile curvature, were taken as independent, causal predictors. Landslide susceptibility maps were developed using the ICM, RS-ICM, AHP-ICM, and EWM-ICM, in which weights were assigned to every conditioning factor. The resultant susceptibility was validated using the area under the ROC curve (AUC) method. The success accuracies of the landslide susceptibility maps produced by the ICM, RS-ICM, AHP-ICM, and EWM-ICM methods were 0.931, 0.939, 0.912, and 0.883, respectively, with prediction accuracy rates of 0.926, 0.927, 0.917, and 0.878 for the ICM, RS-ICM, AHP-ICM, and EWM-ICM, respectively. Hence, it can be concluded that the four models used in this study gave close results, with the RS-ICM exhibiting the best performance in landslide susceptibility mapping.

scholarly journals A Comparative Study of Landslide Susceptibility Mapping Using SVM and PSO-SVM Models Based on Grid and Slope Units

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Shuai Zhao ◽  
Zhou Zhao
Keyword(s):  
Support Vector Machine ◽  
Landslide Susceptibility ◽  
Learning Algorithm ◽  
Slope Angle ◽  
Susceptibility Mapping ◽  
Landslide Susceptibility Mapping ◽  
Training Dataset ◽  
Validation Dataset ◽  
Slope Aspect ◽  
Support Vector

The main purpose of this study aims to apply and compare the rationality of landslide susceptibility maps using support vector machine (SVM) and particle swarm optimization coupled with support vector machine (PSO-SVM) models in Lueyang County, China, enhance the connection with the natural terrain, and analyze the application of grid units and slope units. A total of 186 landslide locations were identified by earlier reports and field surveys. The landslide inventory was randomly divided into two parts: 70% for training dataset and 30% for validation dataset. Based on the multisource data and geological environment, 16 landslide conditioning factors were selected, including control factors and triggering factors (i.e., altitude, slope angle, slope aspect, plan curvature, profile curvature, SPI, TPI, TRI, lithology, distance to faults, TWI, distance to rivers, NDVI, distance to roads, land use, and rainfall). The susceptibility between each conditioning factor and landslide was deduced using a certainty factor model. Subsequently, combined with grid units and slope units, the landslide susceptibility models were carried out by using SVM and PSO-SVM methods. The precision capability of the landslide susceptibility mapping produced by different models and units was verified through a receiver operating characteristic (ROC) curve. The results showed that the PSO-SVM model based on slope units had the best performance in landslide susceptibility mapping, and the area under the curve (AUC) values of training and validation datasets are 0.945 and 0.9245, respectively. Hence, the machine learning algorithm coupled with slope units can be considered a reliable and effective technique in landslide susceptibility mapping.

scholarly journals Landslide Susceptibility Modeling Using Integrated Ensemble Weights of Evidence with Logistic Regression and Random Forest Models

2019 ◽  
Vol 9 (1) ◽  
pp. 171 ◽  
Author(s):  
Wei Chen ◽  
Zenghui Sun ◽  
Jichang Han
Keyword(s):  
Logistic Regression ◽  
Random Forest ◽  
Land Use Planning ◽  
Landslide Susceptibility ◽  
Area Under The Curve ◽  
Roc Curves ◽  
Weights Of Evidence ◽  
Landslide Susceptibility Mapping ◽  
Training Dataset ◽  
Validation Dataset

The main aim of this study was to compare the performances of the hybrid approaches of traditional bivariate weights of evidence (WoE) with multivariate logistic regression (WoE-LR) and machine learning-based random forest (WoE-RF) for landslide susceptibility mapping. The performance of the three landslide models was validated with receiver operating characteristic (ROC) curves and area under the curve (AUC). The results showed that the areas under the curve obtained using the WoE, WoE-LR, and WoE-RF methods were 0.720, 0.773, and 0.802 for the training dataset, and were 0.695, 0.763, and 0.782 for the validation dataset, respectively. The results demonstrate the superiority of hybrid models and that the resultant maps would be useful for land use planning in landslide-prone areas.

Sign in / Sign up

Export Citation Format

Share Document