scholarly journals Sex Differences in the Morphological and Mechanical Properties of the Achilles Tendon

2021 ◽  
Vol 18 (17) ◽  
pp. 8974
Author(s):  
Xini Zhang ◽  
Liqin Deng ◽  
Songlin Xiao ◽  
Lu Li ◽  
Weijie Fu
Keyword(s):  
Mechanical Properties ◽  
Achilles Tendon ◽  
Maximum Voluntary Contraction ◽  
Voluntary Contraction ◽  
Cross Sectional Area ◽  
Morphological Properties ◽  
Sectional Area ◽  
Cross Sectional ◽  
Force Peak ◽  
Strain Stress

Background: Patients with Achilles tendon (AT) injuries are often engaged in sedentary work because of decreasing tendon vascularisation. Furthermore, men are more likely to be exposed to AT tendinosis or ruptures. These conditions are related to the morphological and mechanical properties of AT, but the mechanism remains unclear. This study aimed to investigate the effects of sex on the morphological and mechanical properties of the AT in inactive individuals. Methods: In total, 30 inactive healthy participants (15 male participants and 15 female participants) were recruited. The AT morphological properties (cross-sectional area, thickness, and length) were captured by using an ultrasound device. The AT force–elongation characteristics were determined during isometric plantarflexion with the ultrasonic videos. The AT stiffness was determined at 50%–100% maximum voluntary contraction force. The AT strain, stress, and hysteresis were calculated. Results: Male participants had 15% longer AT length, 31% larger AT cross-sectional area and 21% thicker AT than female participants (p < 0.05). The plantarflexion torque, peak AT force, peak AT stress, and AT stiffness were significantly greater in male participants than in female participants (p < 0.05). However, no significant sex-specific differences were observed in peak AT strain and hysteresis (p > 0.05). Conclusions: In physically inactive adults, the morphological properties of AT were superior in men but were exposed to higher stress conditions. Moreover, no significant sex-specific differences were observed in peak AT strain and hysteresis, indicating that the AT of males did not store and return elastic energy more efficiently than that of females. Thus, the mechanical properties of the AT should be maintained and/or improved through physical exercise.

scholarly journals CNTF 1357 G → A polymorphism and the muscle strength response to resistance training

2009 ◽  
Vol 107 (4) ◽  
pp. 1235-1240 ◽  
Author(s):  
Sean Walsh ◽  
Bethany K. Kelsey ◽  
Theodore J. Angelopoulos ◽  
Priscilla M. Clarkson ◽  
Paul M. Gordon ◽  
...  
Keyword(s):  
Resistance Training ◽  
Muscle Strength ◽  
Maximum Voluntary Contraction ◽  
Voluntary Contraction ◽  
Cross Sectional Area ◽  
Isometric Strength ◽  
Sectional Area ◽  
Cross Sectional ◽  
Caucasian Men ◽  
Before And After

The present study examined associations between the ciliary neurotrophic factor (CNTF) 1357 G → A polymorphism and the muscle strength response to a unilateral, upper arm resistance-training (RT) program among healthy, young adults. Subjects were 754 Caucasian men (40%) and women (60%) who were genotyped and performed a training program of the nondominant (trained) arm with the dominant (untrained) arm as a comparison. Peak elbow flexor strength was measured with one repetition maximum, isometric strength with maximum voluntary contraction, and bicep cross-sectional area with MRI in the trained and untrained arms before and after training. Women with the CNTF GG genotype gained more absolute isometric strength, as measured by MVC (6.5 ± 0.3 vs. 5.2 ± 0.5 kg), than carriers of the CNTF A1357 allele in the trained arm pre- to posttraining ( P < 0.05). No significant associations were seen in men. Women with the CNTF GG genotype gained more absolute dynamic (1.0 ± 0.1 vs. 0.6 ± 0.1 kg) and allometric (0.022 ± 0.0 vs. 0.015 ± 0.0 kg/kg−0.67) strength, as measured by 1 RM, than carriers of the CNTF A1357 allele in the untrained arm pre- to posttraining ( P < 0.05). No significant associations were seen in men. No significant associations, as measured by cross-sectional area, were seen in men or women. The CNTF 1357 G → A polymorphism explains only a small portion of the variability in the muscle strength response to training in women.

Alterations in mechanical properties of mesenteric resistance arteries in experimental portal hypertension

2009 ◽  
Vol 297 (4) ◽  
pp. G849-G857 ◽  
Author(s):  
Markus Resch ◽  
Reiner Wiest ◽  
Lukas Moleda ◽  
Sabine Fredersdorf ◽  
Benjamin Stoelcker ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Liver Cirrhosis ◽  
Portal Hypertension ◽  
Structural Changes ◽  
Cross Sectional Area ◽  
Mesenteric Arteries ◽  
Sectional Area ◽  
Resistance Arteries ◽  
Cross Sectional ◽  
Strain Stress

Splanchnic vasodilation is the pathophysiological hallmark in the development of the hyperdynamic circulatory syndrome in liver cirrhosis and portal hypertension. This has been attributed so far mainly to a marked vascular hyporeactivity to endogenous vasoconstrictors. However, myogenic tone and vessel stiffness have not been addressed in mesenteric arteries in liver cirrhosis. CCl4−-induced ascitic cirrhotic (LC) and age-matched control rats, portal vein-ligated (PVL) rats, and sham-operated rats were investigated. Third-order mesenteric resistance arteries were studied under no-flow conditions using a pressure myograph measuring media thickness and lumen diameter in response to incremental increases in intramural pressure, from which wall mechanics were calculated. Electron microscopy was used for investigation of wall ultrastructure, especially the fenestrae in internal elastic lamina (IEL). In PVL animals, no significant change in passive vessel strain, stress, media-to-lumen ratio, or cross-sectional area was noted. In contrast, in LC rats, vessel strain was markedly elevated compared with healthy control rats, indicating a marked reduction in vessel stiffness. In addition, the strain-stress curve was shifted to the right, and the elastic modulus in dependency on vessel stress decreased, demonstrating predominantly structure-dependent factors to be involved. The media-to-lumen quotient was not significantly altered, but cross-sectional area was highly increased in LC rats, indicating hypertrophic outward remodeling. These findings were paralleled by enlarged fenestrae in the IEL but no change in thickness of IEL or proportion of extracellular matrix or vascular smooth muscle in LC rats. We concluded that, in long-standing severe portal hypertension such as ascitic LC but not in short-term conditions such as PVL, mesenteric resistance arteries exhibit vascular remodeling and markedly less resistant mechanical properties, leading to decreased vessel stiffness accompanied by structural changes in the IEL. This may well contribute to the maintenance and severity of splanchnic arterial vasodilation in LC.

Achilles Tendon Adaptation to Neuromuscular Electrical Stimulation: Morphological and Mechanical Changes

2020 ◽  
Author(s):  
Adrien Létocart ◽  
Jean-Francois Grosset
Keyword(s):  
Mechanical Properties ◽  
Electrical Stimulation ◽  
Achilles Tendon ◽  
Training Program ◽  
High Frequency ◽  
Neuromuscular Electrical Stimulation ◽  
Cross Sectional Area ◽  
Triceps Surae ◽  
Sectional Area ◽  
Cross Sectional

AbstractIt remains unclear whether neuromuscular electrical stimulation can induce sufficient tendon stress to lead to tendon adaptations. Thus, we investigated the effect of such a training program on the triceps surae muscle following the morphological and mechanical properties of the Achilles tendon. Eight men participated in a 12-week high-frequency neuromuscular electrical stimulation training program of the triceps surae muscle under isometric conditions. Ultrasonography was used pre- and post-intervention to quantify cross-sectional area, free length, and total length of the Achilles tendon, as well as the myotendinous junction elongation during a maximal isometric ramp contraction under plantar flexion. Neuromuscular electrical stimulation training does not lead to changes in Achilles tendon free and total length, cross-sectional area, or maximal elongation capacity. However, a significant increase was evidenced in maximal tendon force post-training (+25.2%). Hence, Young’s Modulus and maximal stress were significantly greater after training (+12.4% and +23.4%, respectively). High-frequency neuromuscular electrical stimulation training induces repeated stress sufficient to lead to adaptations of mechanical properties of the Achilles tendon. Thus, this training technique may be of particular interest as a new rehabilitation method in tendinopathy management or to counteract the effect of hypo-activity.

Contribution of Achilles tendon mechanical properties to torque steadiness in persons with transfemoral amputation

2020 ◽  
pp. 030936462096643
Author(s):  
Anis Toumi ◽  
Rowan Smart ◽  
Dimitri Elie ◽  
Jennifer Bassement ◽  
Sébastien Leteneur ◽  
...  
Keyword(s):  
Achilles Tendon ◽  
Coefficient Of Variation ◽  
Maximal Voluntary Contraction ◽  
Plantar Flexion ◽  
Voluntary Contraction ◽  
Cross Sectional Area ◽  
Sectional Area ◽  
Transfemoral Amputation ◽  
Cross Sectional ◽  
Tendon Mechanics

Background: How Achilles tendon mechanics and plantar flexion strength and torque steadiness are altered in the intact leg of persons with trauma-related amputation is unknown. Understanding Achilles tendon mechanics following amputation will further inform rehabilitation approaches to enhance posture, balance, and force control. Objective: Conduct a pilot study to quantify plantar flexion maximal voluntary contraction torque, torque steadiness, and Achilles tendon mechanics in persons with unilateral trauma-related transfemoral amputation and controls without amputation. Study design: Cross-sectional study. Methods: Isometric plantar flexion maximal voluntary contractions were performed with the intact leg of ten males with transfemoral amputation (48 ± 14 years) and the dominant leg of age-matched male controls without amputation. Torque steadiness was calculated as the coefficient of variation in torque over 6 s during submaximal tracking tasks (5%, 10%, 25%, 50%, and 75% maximal voluntary contraction). Achilles tendon elongation and cross-sectional area were recorded with ultrasound to calculate strain, stress, and stiffness. Results: Maximal voluntary contraction and torque steadiness did not differ between persons with amputation (90.6 ± 31.6 N m, 3.7 ± 2.0%) and controls (95.8 ± 26.8 N m, 2.9 ± 1.2%; p > 0.05). Tendon stiffness (21.1 ± 18.2 N/mm) and strain (5.2 ± 1.3%) did not differ between groups ( p > 0.05). Tendon cross-sectional area was 10% greater in persons with amputation leading to 29% lower stress ( p = 0.021). Maximal voluntary contraction was a predictor of a lower coefficient of variation in torque ( R2 = 0.11, p < 0.05). Conclusion: Persons with trauma-related transfemoral amputation do not differ in plantar flexion maximal voluntary contraction and torque steadiness of the intact leg compared with controls without amputation. Larger tendon cross-sectional area reduces stress and enables distribution of force across a greater area.

Effect of habitual running on human Achilles tendon load-deformation properties and cross-sectional area

2003 ◽  
Vol 95 (6) ◽  
pp. 2375-2380 ◽  
Author(s):  
P. Hansen ◽  
P. Aagaard ◽  
M. Kjaer ◽  
B. Larsson ◽  
S. P. Magnusson
Keyword(s):  
Mechanical Properties ◽  
Achilles Tendon ◽  
Training Stimulus ◽  
Cross Sectional Area ◽  
Triceps Surae ◽  
Sectional Area ◽  
Moment Arm ◽  
Angular Rotation ◽  
Cross Sectional ◽  
Deformation Properties

Whether the cross-sectional area (CSA) and mechanical properties of the human Achilles tendon change in response to habitual exercise remains largely unexplored. The present study evaluated the CSA and contraction-induced displacement of the aponeurosis-tendon complex of the triceps surae in 11 untrained subjects before ( tests 1 and 2) and after ( test 3) ∼9 mo of regular running (∼78 training sessions). Displacement of the tendon-aponeurosis complex obtained by ultrasonography; electromyography of the gastrocnemius, soleus, and dorsiflexor muscles; and joint angular rotation were recorded during graded isometric plantarflexion ramps. Tendon CSA and moment arm were measured by using MRI, and tendon force was calculated from joint moments and tendon moment arm. A treadmill test was used to determine submaximal oxygen consumption (V̇o2) at a given speed and maximal V̇o2. The total running duration was ∼43 h, distributed over 34 wk. Maximal V̇o2 increased 8.6% ( P < 0.01), and submaximal V̇o2 decreased 6.2% ( P < 0.05). Tendon-aponeurosis displacement during maximal voluntary contraction was unchanged ( tests 1–3, 5.2 ± 0.6, 5.2 ± 0.5, and 5.3 ± 0.4 mm, respectively) and yielded a structural stiffness of 365 ± 50, 358 ± 40, and 384 ± 52 N/mm for tests 1–3, respectively ( P > 0.05). Tendon CSA also remained unchanged ( tests 1–3, 34.2 ± 2.2, 33.9 ± 2.2, and 33.8 ± 2.1 mm2, respectively). In conclusion, a total training stimulus of ∼9 mo of running in previously untrained subjects was adequate to induce significant cardiovascular improvements, although it did not result in any changes in the mechanical properties of the triceps surea tendon-aponeurosis complex or in the dimensions of Achilles tendon.

scholarly journals Yeast Morphology Assessment through Automated Image Analysis during Fermentation

Fermentation ◽  
2021 ◽  
Vol 7 (2) ◽  
pp. 44
Author(s):  
Mario Guadalupe-Daqui ◽  
Mandi Chen ◽  
Katherine A. Thompson-Witrick ◽  
Andrew J. MacIntosh
Keyword(s):  
Image Analysis ◽  
High Stress ◽  
Cross Sectional Area ◽  
Automated Image Analysis ◽  
Yeast Cells ◽  
Morphological Properties ◽  
Cell Area ◽  
Sectional Area ◽  
Cross Sectional ◽  
Industrial Fermentation

The kinetics and success of an industrial fermentation are dependent upon the health of the microorganism(s) responsible. Saccharomyces sp. are the most commonly used organisms in food and beverage production; consequently, many metrics of yeast health and stress have been previously correlated with morphological changes to fermentations kinetics. Many researchers and industries use machine vision to count yeast and assess health through dyes and image analysis. This study assessed known physical differences through automated image analysis taken throughout ongoing high stress fermentations at various temperatures (30 °C and 35 °C). Measured parameters included sugar consumption rate, number of yeast cells in suspension, yeast cross-sectional area, and vacuole cross-sectional area. The cell morphological properties were analyzed automatically using ImageJ software and validated using manual assessment. It was found that there were significant changes in cell area and ratio of vacuole to cell area over the fermentation. These changes were temperature dependent. The changes in morphology have implications for rates of cellular reactions and efficiency within industrial fermentation processes. The use of automated image analysis to quantify these parameters is possible using currently available systems and will provide additional tools to enhance our understanding of the fermentation process.

Comparison of the Cross Sectional Area, the Loss in Volume and the Mechanical Properties of LAE442 and MgCa0.8 as Resorbable Magnesium Alloy Implants after 12 Months Implantation Duration

2010 ◽  
Vol 638-642 ◽  
pp. 675-680 ◽  
Author(s):  
Martina Thomann ◽  
Nina von der Höh ◽  
Dirk Bormann ◽  
Dina Rittershaus ◽  
C. Krause ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Cross Sections ◽  
Degradation Process ◽  
Cross Sectional Area ◽  
Bending Test ◽  
Sectional Area ◽  
Cross Sectional ◽  
Initial Strength ◽  
Three Point Bending ◽  
The Cross

Current research focuses on magnesium based alloys in the course of searching a resorbable osteosynthetic material which provides sufficient mechanical properties besides a good biocompatibility. Previous studies reported on a favorable biocompatibility of the alloys LAE442 and MgCa0.8. The present study compared the degradation process of cylindrical LAE442 and MgCa0.8 implants after 12 months implantation duration. Therefore, 10 extruded implants (2.5 x 25 mm, cross sectional area 4.9 mm²) of both alloys were implanted into the medullary cavity of both tibiae of rabbits for 12 months. After euthanization, the right bone-implant-compound was scanned in a µ-computed tomograph (µCT80, ScancoMedical) and nine uniformly distributed cross-sections of each implant were used to determine the residual implants´ cross sectional area (Software AxioVisionRelease 4.5, Zeiss). Left implants were taken out of the bone carefully. After weighing, a three-point bending test was carried out. LAE442 implants degraded obviously slower and more homogeneously than MgCa0.8. The mean residual cross sectional area of LAE442 implants was 4.7 ± 0.07 mm². MgCa0.8 showed an area of only 2.18 ± 1.03 mm². In contrast, the loss in volume of LAE442 pins was more obvious. They lost 64 % of their initial weight. The volume of MgCa0.8 reduced clearly to 54.4 % which corresponds to the cross sectional area results. Three point bending tests revealed that LAE442 showed a loss in strength of 71.2 % while MgCa0.8 lost 85.6 % of its initial strength. All results indicated that LAE442 implants degraded slowly, probably due to the formation of a very obvious degradation layer. Degradation of MgCa0.8 implants was far advanced.

Habitual loading results in tendon hypertrophy and increased stiffness of the human patellar tendon

2008 ◽  
Vol 105 (3) ◽  
pp. 805-810 ◽  
Author(s):  
C. Couppé ◽  
M. Kongsgaard ◽  
P. Aagaard ◽  
P. Hansen ◽  
J. Bojsen-Moller ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Patellar Tendon ◽  
Cross Sectional Area ◽  
Isometric Contractions ◽  
Sectional Area ◽  
Cross Sectional ◽  
Strength Difference ◽  
Distal Tendon

The purpose of this study was to examine patellar tendon (PT) size and mechanical properties in subjects with a side-to-side strength difference of ≥15% due to sport-induced loading. Seven elite fencers and badminton players were included. Cross-sectional area (CSA) of the PT obtained from MRI and ultrasonography-based measurement of tibial and patellar movement together with PT force during isometric contractions were used to estimate mechanical properties of the PT bilaterally. We found that distal tendon and PT, but not mid-tendon, CSA were greater on the lead extremity compared with the nonlead extremity (distal: 139 ± 11 vs. 116 ± 7 mm2; mid-tendon: 85 ± 5 vs. 77 ± 3 mm2; proximal: 106 ± 7 vs. 83 ± 4 mm2; P < 0.05). Distal tendon CSA was greater than proximal and mid-tendon CSA on both the lead and nonlead extremity ( P < 0.05). For a given common force, stress was lower on the lead extremity (52.9 ± 4.8 MPa) compared with the nonlead extremity (66.0 ± 8.0 MPa; P < 0.05). PT stiffness was also higher in the lead extremity (4,766 ± 716 N/mm) compared with the nonlead extremity (3,494 ± 446 N/mm) ( P < 0.05), whereas the modulus did not differ (lead 2.27 ± 0.27 GPa vs. nonlead 2.16 ± 0.28 GPa) at a common force. These data show that a habitual loading is associated with a significant increase in PT size and mechanical properties.

Impact of oral contraceptive use and menstrual phases on patellar tendon morphology, biochemical composition, and biomechanical properties in female athletes

2013 ◽  
Vol 114 (8) ◽  
pp. 998-1008 ◽  
Author(s):  
Mette Hansen ◽  
Christian Couppe ◽  
Christina S. E. Hansen ◽  
Dorthe Skovgaard ◽  
Vuokko Kovanen ◽  
...  
Keyword(s):  
Patellar Tendon ◽  
Female Athletes ◽  
Maximum Voluntary Contraction ◽  
Biomechanical Properties ◽  
Cross Sectional Area ◽  
Cross Linking ◽  
Sectional Area ◽  
Cross Sectional ◽  
Collagen Cross Linking

Sex differences exist with regards to ligament and tendon injuries. Lower collagen synthesis has been observed in exercising women vs. men, and in users of oral contraceptives (OC) vs. nonusers, but it is unknown if OC will influence tendon biomechanics of women undergoing regular training. Thirty female athletes (handball players, 18–30 yr) were recruited: 15 long-term users of OC (7.0 ± 0.6 yr) and 15 nonusers (>5 yr). Synchronized values of patellar tendon elongation (obtained by ultrasonography) and tendon force were sampled during ramped isometric knee extensor maximum voluntary contraction to estimate mechanical tendon properties. Furthermore, tendon cross-sectional area and length were measured from MRI images, and tendon biopsies were obtained for analysis of tendon fibril characteristics and collagen cross-linking. Overall, no difference in tendon biomechanical properties, tendon fibril characteristics, or collagen cross-linking was observed between the OC users and nonusers, or between the different phases of the menstrual cycle. In athletes, tendon cross-sectional area in the preferred jumping leg tended to be larger than that in the contralateral leg ( P = 0.09), and a greater absolute ( P = 0.01) and normalized tendon stiffness ( P = 0.02), as well as a lower strain ( P = 0.04), were observed in the jumping leg compared with the contralateral leg. The results indicate that long-term OC use or menstrual phases does not influence structure or mechanical properties of the patellar tendon in female team handball athletes.

Sign in / Sign up

Export Citation Format

Share Document