scholarly journals Flammability Characteristics of Animal Fibers: Single Breed Wools, Alpaca/Wool, and Llama/Wool Blends

Fibers ◽  
2019 ◽  
Vol 7 (1) ◽  
pp. 3 ◽  
Author(s):  
Mary L. Galaska ◽  
Larry D. Sqrow ◽  
J. Douglas Wolf ◽  
Alexander B. Morgan
Keyword(s):  
Heat Release ◽  
Flame Spread ◽  
Cone Calorimeter ◽  
Chemical Structure ◽  
Animal Species ◽  
Sheep Breeds ◽  
Merino Wool ◽  
Color Differences ◽  
Flammability Characteristics ◽  
Texture Structure

Animal protein-based fibers used in textiles often are assumed to have uniform properties independent of source, and yet are different when considering texture, structure, and color. Differences between fibers from animal species have been studied in regard to general flammability behavior, but differences between fibers from breeds of the same species have not been studied. Fibers from two sheep breeds (Jacob, CVM/Romeldale) and two camelids (Alpaca, Llama) were studied for flammability effects on fabrics hand knit from yarns made from these different fibers. A total of five different yarns were studied: 100% Jacob, 100% CVM/Romeldale, 100% Alpaca, 50% Llama/Merino wool, and 50% Alpaca/Merino wool. Flammability was studied with cone calorimeter, microcombustion calorimeter, and vertical flame spread techniques. The results from this limited study demonstrate that there are differences between fibers from different breeds and differences between species, but the differences cannot be easily explained on the basis of inherent heat release or chemistry of the fiber. Sometimes yarn density and the tightness of the knit have more of an effect on self-extinguishment in vertical flame spread tests than does fiber heat release/chemistry. Pure Alpaca fiber, however, displays self-extinguishing behavior and low heat release when subjected to combustion conditions. This may be related to the amount of sulfur in its chemical structure, and its ability to be spun into a yarn which yields a tighter hand-knit density.

Comparison of flame spread measurement using Cone Calorimeter and LIFT apparatus

2021 ◽  
Author(s):  
Masato Komiya ◽  
Kazunori Harada ◽  
Daisaku Nii ◽  
Ken Matsuyama ◽  
Koji Kagiya
Keyword(s):  
Flame Spread ◽  
Cone Calorimeter

scholarly journals Role of Copper Oxide on Epoxy Coatings with New Intumescent Polymer-Based Fire Retardant

Molecules ◽  
2020 ◽  
Vol 25 (24) ◽  
pp. 5978
Author(s):  
Riyazuddin ◽  
Samrin Bano ◽  
Fohad Mabood Husain ◽  
Jamal Akhter Siddique ◽  
Khadijah H. Alharbi ◽  
...  
Keyword(s):  
Copper Oxide ◽  
Heat Release ◽  
Flame Retardant ◽  
Cone Calorimeter ◽  
Elevated Temperatures ◽  
Fire Retardant ◽  
Intumescent Flame Retardant ◽  
Gravimetric Analysis ◽  
Sem Images ◽  
Major Drawback

Epoxy resins (EP) have been used as a thermos-setting material in the field of coating, casting, bonding agent, and laminating. However, a major drawback associated with its use is the lack of good flaming properties, and it is responsible for heavy smoke along with hazardous gases considerably limiting its uses in various fields. In this study, N-ethanolamine triazine-piperizine, a melamine polymer (ETPMP), was established as a new charring-foaming agent and was successfully synthesized with ethanolamine, piperizine, cyanuric chloride, and melamine as precursor molecules via the nucleophilic substitution reaction method. Elemental analysis and Fourier transform infrared (FTIR) spectroscopy analysis were applied to approve the synthesis of ETPMP and confirmation of its structure and characterization. The epoxy coating of intumescent flame retardant (IFR) was equipped by introducing ETPMP, ammonium polyphosphate (APP), and copper oxide (CuO) in multiple composition ratios. CuO was loaded at various amounts into the IFR-coating system as a synergistic agent. The synergistic action of CuO on IFR coatings was scientifically examined by using different analytical tests such as vertical burning test (UL-94V), limited oxygen index (LOI), thermal gravimetric analysis (TGA), cone calorimeter, and scanning electron microscope (SEM). The results showed that small changes in the amount of CuO expressively amplified the LOI results and enhanced the V-0 ratings in the UL-94V test. The TGA data clearly demonstrate that the inclusion of CuO can transform the thermal deprivation behavior of coatings with a growing char slag proportion with elevated temperatures. Information from cone calorimeter data affirmed that CuO can decrease the burning factors by total heat release (THR) together with peak heat release rate (PHRR). The SEM images indicated that CuO can enrich the power and compression of the intumescent char that restricts the movement of heat and oxygen. Our results demonstrate a positive influence of CuO on the epoxy-headed intumescent flame retardant coatings.

Flammability testing of wool/cellulosic and wool/synthetic fiber blends: Vertical flame spread and heat release results

2020 ◽  
Vol 38 (6) ◽  
pp. 522-551
Author(s):  
Alexander B Morgan ◽  
Mary L Galaska
Keyword(s):  
Heat Release ◽  
Flame Spread ◽  
Natural Fiber ◽  
Woven Fabric ◽  
Synthetic Fiber ◽  
Cone Calorimetry ◽  
Lower Heat ◽  
Microscale Combustion Calorimeter ◽  
Microscale Combustion Calorimetry ◽  
Combustion Calorimeter

Wool is a natural fiber with lower heat release/flammability than some synthetic fabrics, but it has not been well studied for its heat release when other fibers such as cotton, linen, and nylon are present in the woven fabric. In this article, the heat release and vertical flame spread of six commercially available natural color fabrics is reported. This includes 100% wool, 80% wool/20% nylon, 70% wool/30% linen, 45% wool/55% cotton, and 40% wool/38% cotton/12% nylon/10% metallic thread fabric. Heat release was measured through cone calorimetry (ASTM E1354) as a function of the sample mounting method, through microscale combustion calorimetry (ASTM D7309), and flame spread was measured by ASTM D6413. The type of insulated backing used greatly affected the cone calorimeter results, and fabric types did show some effects in vertical flame spread and microscale combustion calorimeter testing.

scholarly journals The formation of charcoal reflectance and its potential use in post-fire assessments

2016 ◽  
Vol 25 (7) ◽  
pp. 775 ◽  
Author(s):  
Claire M. Belcher ◽  
Victoria A. Hudspith
Keyword(s):  
Heat Release ◽  
Release Rate ◽  
Cone Calorimeter ◽  
Fire Severity ◽  
Combustion Process ◽  
Peak Heat Release Rate ◽  
Fire Front ◽  
Char Oxidation ◽  
Reflectance Microscopy ◽  
Potential Use

Charcoal has an exceptional ability to reflect light when viewed using reflectance microscopy. The amount of light reflected is variable depending on the differential ordering of graphite-like phases within the charcoal itself. It has been suggested that this relates to the temperature of formation, whereby higher formation temperatures result in high charcoal reflectance. However, this explanation is derived from oven-based chars that do not well represent the natural combustion process. Here, we have experimentally created charcoals using a cone calorimeter, in order to explore the development of charcoal reflectance during pre-ignition heating and peak heat-release rate, through to the end of flaming and the transition to char oxidation. We find that maximum charcoal reflectance is reached at the transition between pyrolysis and char oxidation, before its conversion to mineral ash, and indicates that our existing understanding of reflectance is in error. We suggest that charcoal reflectance warrants additional study as it may provide a useful quantitative addition to ground-based fire severity surveys, because it may allow exploration of surface heating after the main fire front has passed and the fire transitions to smouldering phases.

Sign in / Sign up

Export Citation Format

Share Document